5 Axis CNC Routers

BIESSE ROVER A 1659

Condition: used, machine/vehicle number: 008496, X axis working area: 5920 mm Y axis working area: 1600 mm Working Table: Pod and Rail Pedpfxjy H Dzfs Ag Rsgu Main Electrospindle power: 16.5 KW Number of controlled axes: 5 axes Total number of drilling spindles: 23 Total number of tool changer positions: 34

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. Pgsdpey Ehrxefx Ag Rju The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Double table machining center Working range X 2,590 mm Working range Y 2,260 mm Working range Z 400 mm Number of milling spindles 2 Liquid-cooled spindle Main motor 19.2 kW Max rotational speed 24,000 rpm Aggregate heads 4 C-axis Tool clamping system HSK-F63 Tool change positions central magazine 24 Tool change on each head from 12 positions Boring heads vert. 20 (for each head) Horizontal boring heads X 8 Horizontal boring heads Y 8 Blade for grooves in X, in Y 2 Platens Number 4 360 m³/h vacuum pumps T Jet system for chip blowing Nesting Manual labeling Bar code reader Tool length measurement Software BIESSE BIESSEWORKS ADVANCED, BIESSE B_NEST Weight 17,900 kg Pjdpfxeuqw E Ne Ag Rjgu

Condition: used, machine/vehicle number: 008550, X axis working area: 4300 mm Pgedpfx Agez Eyycj Reu Y axis working area: 2205 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of drilling spindles: 28 Total number of tool changer positions: 16

Condition: used, machine/vehicle number: 008481, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of drilling spindles: 22 Pjdpey Edpmjfx Ag Rsgu Total number of tool changer positions: 36

Condition: used, Year of construction: 2018, CNC-CONTROLLED MACHINING CENTER AUTHOR M 200 AUTHOR M200 3710x1620 Z250 - CNC-controlled machining center 1 Technical data Work area I.M.S. I.U. Work area X-axis 3710 mm * 146" * Work area Y-axis 1620 mm * 63¾" * Workpiece passage Y 1900 mm 74¾" Workpiece passage Z 250 mm 9¾ Workpiece length for pendulum machining 1700 + 1700 mm 67" + 67" Travel speed of the X-Y axes PRO-SPACE 56 m/min 184 ft/min Travel speed of the X-Y axes PRO-SPEED 78 m/min 256 ft/min * Distance covered by all tools in the X and Y direction; see the corresponding layout for further details. With a 5-axis motor, the dimension in Y increases to 1680mm (66"), for motor JQX or 1720mm (67½") for motor KS/KT max. Width of the loadable plate for horizontal drilling, electric spindle only oriented vertically, no central reference stops Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Electrical standard specifications 400 Voltage 50 Hz 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h 2650 CFM Extraction air velocity 30 m/sec Extraction nozzle diameter 250 mm 9.8 Inches Noise level VSA * LAV * Drilling 72.2 74.6 Milling 74.3 80.7 Reference standard EN ISO 11202:1995* VSA = unloaded and without extraction * LAV = in operation with extraction Structure of the base body: The CNC machining center can be equipped flexibly with different milling units as well as multi-spindle drilling heads and many other units, up to dowel drilling units. In order to meet all requirements in the field of wood and plastic processing, as well as the demands of the users, each machine can be equipped with 3, 4 or 5 machining axes. The selection of drilling units extends to up to 34 drilling spindles with an integrated groove saw for the back panel groove or rabbet machining. The possibility of using this high-quality CNC machining center both as a cantilever table machine and with an aluminum grid table underscores the flexible range of applications and the performance of the M100 and M200 series. Powerful drilling heads, with individually selectable drilling spindles, max. RPM 8,000, and implemented in . technology, "the most robust drilling spindles on the market", with more than 1,000 maintenance-free application hours (lubrication interval of the drilling spindles). The possibility of being able to replace the drilling spindles within a very short time, "even without a technician", through the technology, without disassembling the drilling gear, sets a benchmark in the industry and is already standard on your machining center. Imagine your CNC machine performing hinge drilling in just one drilling operation (option), instead of the usual 3. An option that underscores our claim to offer you robust and high-performance units on our machines. Ideally and flexibly equipped for a wide variety of requirements. Whether manual or automatic, the FLEX cantilever work table allows vacuum cups and mechanical clamping elements, such as pneumatic clamps for window or curtain wall constructions (option), to be quickly, safely and cost-effectively adjusted to any material and clamping requirements, making your day-to-day work easier. Differently sized vacuum cups and clamping elements, which were developed in close cooperation with customers and users, are available as an option. Podpfxezvhkyo Ag Regu

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives Psdpfx Ajzlbpbog Rogu (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Pgjdpfxjyqxxre Ag Rju Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 39 Total number of tool changer positions: 22

Condition: used, Year of construction: 2010, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 44 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, overall weight: 6,700 kg, Equipment: CE marking, Biesse Rover C 6.50 Config. 3 CNC machining centre 5-Axis Description Numerically controlled machining center ROVER C 6.50 Working fields - configuration 3 :X = 4600 mm; Y = 1535 mm; Z = 275 mm CE Safety devices 8 ATS panel supports - L = 152 5 mm - 32 sliding bases Automatic positioning of 8 panel supports and sliding bases (EPS X-Y ) Belt conveyor for the removal of chips and off-cuts Pneumatic locking system divided in 2 work areas in X 8 rear reference stops with a stroke of 115 mm 8 Stops with a stroke of 140 mm positioned at 1175 mm (L= 12 80 - 1525 - 1800 mm) 4 Side stops with a stroke of 140 mm (2 Lh + 2 Rh) inclusive of the pneumatic system. 4 removable central stops with a stroke of 140 mm (2 Lh + 2 Rh) incl. of the pneumatic system Sensor for the detection of lowered stops Pneumatic system for lifting bar supports with double pneumatic stroke 6 lifting bar supports with double pneumatic stroke (H=74mm)uniclamps Vacuum system for a 250 m3/h pump 1 x 250 m3/h rotary veins vacuum pump for standard vacuum system Composition C3-A1 Operating unit with 5 interpolating axes Prearrangement for the assembly of chip deflectors with pneumatic or inductive sensor on a 5-axes operating unit Composition C3-P2 Chain tool changer with 33 places at 120 mm center distance Iron gripper on chain toolchanger for chip deflector compatible with 5-axes electrospindle RH Chip deflector for 5-axes operating unit Liquid cooling unit for liquid cooled systems Automatic lubrication system Software update from BiesseWorks Basic machine to BiesseWorks Advanced machine CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Pgodpfx Agjzqdmae Reu Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 3,110 mm, travel distance Y-axis: 1,620 mm, number of axes: 4, number of slots in tool magazine: 11, spindle motor power: 10,000 W, spindle speed (max.): 24,000 rpm, This 4-axis SCM Morbidelli Author M100 CNC Wood Machining Centre was manufactured in 2018. It features a working area along the X-axis of 3110 mm and a maximum panel height of 180 mm. The machine is equipped with 21 vertical spindles and 10 horizontal spindles, providing versatile machining capabilities. If you are looking to get high-quality wood machining capabilities, consider the SCM Morbidelli Author M100 machine we have for sale. Contact us for further details. • Working area / axes: • Panel length (Y): 1900 mm (2210 mm) • Panel height (Z): 180 mm • Panel length for through machining: 1400 mm • Vector speed X‑Y: Pro‑Space 56 m/min; Pro‑Speed 78 m/min • Worktable: 6–12 beams (TV Flex), 12 vacuum pods (145 × 145 × H75 mm); 2 stops per beam; movable beam length 1600 mm. • Drilling unit (general spec): • 21 vertical spindles, 8,000 rpm • 10 horizontal spindles, 8,000 rpm • Integrated saw Ø125 mm (X), 10,000 rpm • Motor power 2.2 kW • Electrospindle: 10 kW (S6), max 24,000 rpm. • Installation requirements: installed power 23–28.5 kVA; compressed air 450 NL/min; dust extraction 4500 m³/h, 25 m/s, outlet Ø250 mm. • Structure and motion: • Heavy, stress‑relieved, electro‑welded steel frame; all machining in single setup on CNC metalworking machines. • High‑speed four‑row linear guides; three‑circuit recirculating ball systems; X‑axis helical rack‑and‑pinion. • Brushless motors, inverters; machining units mounted on mobile gantry for rigidity. • Transparent polycarbonate safety enclosure. • CNC control and software: • PC‑Office: Windows 7, 17" color LCD, QWERTY keyboard, mobile control panel, Xilog Maestro. • Xilog Maestro features: parametric/graphical/ISO programming; DXF/ASCII import (2D); 3D linear/circular interpolation; spatial linear interpolation; helical interpolation; guided editor; automatic drilling optimization and tool libraries; panel origin offset; simulation; barcode management (software); self‑diagnostics; step‑by‑step manual intervention; graphical unit configuration; machining speed selection; SCM CNC Jerk function. • Safety: CE; PRO‑SPACE system with safety bumpers (automatic stop on potential collision). • Table equipment included/mentioned: rear aluminum reference stops H75 per beam; second central reference stops per beam; front reference stops H75 per beam. • Vacuum system: integrated vacuum pump 90/108 m³/h, 50 Hz. • F23 L drilling unit (listed configuration): • Independent Z‑axis • 13 independent vertical spindles (8 X / 5 Y) • 6 independent horizontal spindles (quick‑release), incl. 4 in Y • 32 mm pitch • Speed 4,500–8,000 rpm (inverter) • Rear‑panel groove/saw unit Ø125 mm, 5,500–10,000 rpm (inverter) • Motor 2.2 kW • Increased Z‑pressure • RO AX advantages: high productivity, precision, finish quality, processing speed; up to 90% reduction in maintenance (approx. 1,000‑hour interval). Additional equipment • TRB14 side‑mounted tool magazine (optional), right side: • Capacity up to 11 tools; max Ø350 mm • Center distance 130 mm • Max tool weight 8 kg; total 48 kg • 4 workpiece lifting supports H75, two lifting levels (above clamps and working level), 20 kg per support • Additional hardware key with USB port Pgodpfx Agez A Ahqe Rou