centerless cylindrical grinding machine make NOMOCO type M 100
Machine # 5100 Year of construction 1980
Technical data:
grinding length 180 mm
Cppqpsyw
grinding diameter 100 mm
grinding wheel dimensions 400 x 150 mm
Bore of grinding wheel 203 mm
Drive power 15 kW
weight approx. 4200 kg
dimensions approx. 2300 x 2000 x 2000 mm
with
- many accessories
used, in very good condition
1 piece used universal centerless cylindrical grinding machine
Buw3vhev7b
maximum grinding diameter - approx. 80mm
Centerless cylindrical grinding machine NOMOCO type M 100
Fabr. No. 2265 built 1971
Maximum grinding diameter of 100 mm
Smallest grinding diameter of min. 2 mm
Grinding wheel diameter of 400 mm
Grinding wheel width of 180 mm
-internal grinding wheel Ø 310 mm, width 150 mm
Power supply 380 v, 50 Hz
Bc9vdha88q
Dimensions L x W x H 1900 x 1450 x 1800 mm
Weight approx. ton 3.2.
Sell here a Nomoco M100 run until dismantling.
With diamond dressing roll optional conversion to conventional dressing possible.
Original instruction manual available.
Mwmlwc
For questions please contact
Make: HERMINGHAUSEN, Type: SR2G, Year of construction: 1972, Ser.-No. 468145, Grinding-Ø 0,5 - 40 mm, Grinding length max. 100 mm, Grinding wheel-Ø 300 mm, Control wheel-Ø 200 mm, Grinding wheel width 100 mm, Speed grinding wheel max. 2.000 rpm, Control wheel max. 180 rpm, Power 6 kW, Control panel, Control cabinet - Pos. 215, Nr. 77
2cafnen0
Machine number: 341150
Grinding diameter max: 120 mm
Bxmg0oexj8
Grinding wheel diameter: 500 mm
regulating wheel diameter: 300 mm
Grinding wheel width: 260 mm
Control wheel width: 260 mm
Weight: approx. 6,5 t
Technical data:
Smallest workpiece diameter 1.5 mm
Largest workpiece diameter 50 mm
Largest length for plunge grinding 125 mm
Grinding wheel: Diameter 300 mm
Width 125 mm
Bore 175 mm
regulating wheel: diameter 220 mm
width 125 mm
Bore 127 mm
Net weight 1.600 kg
Suitable for through grinding and plunge grinding
Accessories see pictures
Iombriyzo
Complete operating instructions with E-Plan included
Machine is first hand
Machine is fully functional and can be visited by appointm...
Cylindrical grinding machine
Hartex BED 4/2
Was in use until last.
Ha7tip
Dealers are very welcome.
Centerless cylindrical grinding machineFabr.Nomoco Type:M100ESeries:S107Working range: Diameter up to:100mmLength up to:400mmComplete machine documentation available.see machine card for further data.
Bfeum0esy9
Connected load: 22kVA, CNC controls: FANUC Series 18i-MB, weight: 3.8t, operational hours: ca. 3,000h, with Automation ABS, Fire Extinguishing System KRAFT BAUER and Centrifuge STREULI SHSRT 300-SHS100.
Bswi7zvy83
workpiece dia. max. 120 mm
workpiece length – max. plunge grinding 250 mm
grinding wheel speed approx. 10-255 r.p.m
Motor 22 kW
Mqjln
weight 6,5 t
Control: conventional
Suitability: Throughfeed grinding, plunge grinding
workpiece diameter min/max: 2 / 30 mm
max. workpiece length: infinite
grinding wheels: 300 x 100 mm
regulating wheel: 250 x 100 mm
Yrolag
Swivelling range of regulating wheel:
Swivel range dressing device:
Infeed accuracy:
Connection: 6,6 kW
Accessories/equipment: Operating instructions
Condition: good
weight: 2,8 t
Dimensions:
1 x centerless cylindrical grinding machine
Agathon
150 SL 20
Year of construction: 2000
With Positech belt filter system
+ Feed
Technical data:
workpiece diameter: 0,1 - 10 mm
Max. grinding length: 50 mm
Smallest infeed regulating wheel slide: 0.001 mm
grinding wheel diameter: max.150 min 120 mm
Max.grinding wheel width: 50 mm
Control pulley diameter: max. 100 mm
regulating wheel width: max. 50 mm
Accessories
Bjnffobvae
various grinding wheels and flanges
(partially new)
10 x ruler
full documen...
Technical data
Nfwcb
Workpiece diameter 2 to 10 mm wheel diameter 600 mm grinding wheel width rule disc diameter of 150 mm 300 mm control ski flat width 150 mm velocity wheel 35 m/s Regelscheib endrehzahl (adjustable) 13 to 266 min1 power grinding motor 15 kW machine weight approx. 5.5 t largest workpiece length infeed grinding 150 (180) mm machines Zust and: Vorführbereit on request
• Mechanically redesigned machine in the year 2018.
• Machine electrics changed to keep and not.
Grinding wheel DxB 455 x 255 mm workpiece diameter 1-60 mm, control disc DxB 255 x 255 mm, disc speed 10-100 rpm, power SS 11 kW, weight approx. to 3.7, size approx. 2,700 x 1,700 mm
9k9j0kxz9
Machine is suitable to the pass and feed grinding, hardened and ground Guide
pave grinding and control spindle with hydrodynamsicher three-point bearing, lubrication for carriage and delivery spindles, rule discs powered by DS engine, frequency controlled, hydraulic dressing equipment for grinding and rul...
Connected load: 32kW, controls: WMW MIKROSA Linear Scale, weight: 5t.
2san0v8r
Technical description:
Workpiece spindle: 1500 1/min, 1,8kW, 90Nm
centre height: 215mm
centre distance: 1.800mm
X-axis: travel 500mm, rapid traverse speed 30m/min, drive via ball screw drive
Z-axis: travel 1500mm, rapid traverse speed 30m/min, drive via linear motor
B-axis: swivel range -45° to +225°, drive via torque motor
Inclined bed (45°) made of granite
Tools and spindles are arranged on the continuously swivelling (B-axis) multifunctional head
Coolant system integrated in the machine bed
B...
grinding diameter:650 mm
grinding length:400 mm
centre height:125/175 mm
swival range +/-:45-90 °
Vtxgoa
speed:50-10.000 m/min
quick adjustment:50 mm
biggest piercing:50 mm
max. travel speed:0,06-60 mm/min
Cone:Morse 5 mm
tail stock:Morse 3
total power requirement:5/8,25 kW
weight of the machine ca.:3400 kg
grinding diameter:280 mm
grinding length:1000 mm
centre height:140 mm
travel -z axis:900 mm
Ifkbcdpkk
Workpiece weight approx.:30 kg
grinding wheel diameter:400 mm
peripheral speed:140 m/sec
total power requirement:70 kW
weight of the machine ca.:15 t
dimensions of the machine ca.:5 x 5 m
Junker Quickpoint 5002/20 in perfect condition. first Hand, incl. high class Coolat device with Filter System
Ref. -No.: 10105
Brand: KELLENBERGER
Type of control: Konventionell
Control: N/A
Storage location: Mülheim an der Ruhr
Country of origin: Schweiz
Serial no.: 32.463-2593
Table speed / hydraulic: 6 m / min
Grinding wheel (surface grinding diameter x width x hole): 400 x 50 x 127 mm
Swivel head: 360 °
Grinding wheel speed range: 1020 - 1700 RPM
Infinitely variable speeds: 20 - 400 RPM
Spindle Taper: B32
Spindle cone: 5 MK
Machine length: 3000 mm
Machine width: 1700 mm
Machine Height: 1400 mm
Ma...
grinding diameter 640 mm
grinding length 2.500 mm
centre height 325 mm
Control Sinumerik 840D
Work area over table
max. swing diameter 640 mm
max. workpiece weight between centers 1500 kg
x-axis
Travels: 550 mm
Working speed 8 m/min
z-axis
Travels: 2800 mm
Feed speed 12 m/min.
grinding spindle head
wheel dimensions 760x100x304.8 mm
cutting speed 45 m/sek
workpiece spindle head
speeds 1-300 U/min
tail stock
taper 6 Stk
quill stroke 100 mm
weight of the machine ca. 25 t
dimensions of ...
grinding diameter:500 mm
grinding length:2000 mm
centre height:251 mm
max. workpiece weight between centers:500 kg
workpiece spindle head::5 MK
tailstock quill taper MT:4 MK
Bc29nj9q
Grinding wheel diameter / width / bore:400/100/127 mm
Grinding wheel motor:4 KW
Further technical data, and standard and optional equipment, as defined in Appendix.
Payment: 100% before loading of the machine
Warranty: no
grinding diameter:250 mm
grinding length:1000 mm
centre height:125 mm
Distance between centres:1000 mm
grinding slide speed stepless:0,001 - 100,0 mm/min
grinding head swivelling (longit. axis):270 Grad
Bwlix27fvb
grinding wheel dia. x width:300/400 x 63/40 mm
grinding spindle drive:4,5 kW
grinding spindle speed:1750 U/min
total power requirement:10 kW
weight of the machine ca.:4 t
Machine suitable for cylindrical-, and face grinding
- CNC control KELCO 70
- left/right spindle, swivable headsto...
grinding diameter 250 mm
grinding length 650 mm
centre height 125 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Bbye3o3y
- New -
Description:
- The ideal cylinder grinding machine for
the ambitious do-it-yourselfer
- Infinitely adjustable feed speed
from 0 - 3.5 m / min for optimal sanding results
- The grinding unit is set using a height adjustment crank
and scale quickly and accurately to the
Workpieces adapted
- Serially with suction device
- For the use of commercially available
Suitable for abrasive cloth
Technical specifications:
Dimensions and weights
Length approx. 1030 mm
Width / dep...
grinding diameter:300 mm
grinding length:1000 mm
centre height:175 mm
Jcdb9of
weight of the machine ca.:5 t
CNC control GE Fanuc Series 16-GC
X / Z 267/650 mm
Max. Workpiece weight approx. 80 kg.
grinding diameter mm
Run0ger7
grinding length mm
centre height mm
travel -x axis 700 mm
milling-head swivable +/-
weight of the machine ca. 3 t
:Omicron CNC 3606 | Omicron CNC 3610 | Omicron CNC 3615 | Omicron CNC 3620
grinding diameter:355 / 455 mm
grinding length:630 | 1030 | 1530 | 2030 mm
centre height:180 / 230 mm
swing over bed:355 / 455 mm
max. workpiece weight:250 (300 opt.) kg
grinding headstock:_____ __
grinding wheel size:450 (opt. 500) mm x127 x min.20-max.80 mm
grinding spindle speed:600-1600 (stufenlos) 1/min
feed per revolution of handwheel:0,001/ 0,01 / 0,1 mm
grinding head swivellable +/-:±180 °
automatic feeds:0,2-3...
grinding length 1000 mm
centre height 175 mm
Wb7ey73u
Additional information
Equipment:
CNC control Fanuc Series 16-T
With controlled B and C axes
Two external cylindrical grinding wheels, left and right side
Coolant system
Accessories:
2 pieces grinding wheel flanges
Dressing device
The hydraulic tailstock is currently dismantled
grinding diameter 355 mm
grinding length 1500 mm
centre height 180 mm
grinding wheel width 80 mm
grinding wheel diameter 500 x 203,2 mm mm
speeds of grinding spindle 1400 U/min
power capacity - grinding motor 9 kW
table speed -stepless- 0,01-15000 m/min
grinding spindle head - swivable B-Achse CNC-gesteuert °
adjustment autom. at table reverse 0,01-10000 mm/min
turning speed range - workpiece spindle 10-500 U/min
grinding head swivelling °
workpiece-spindlehead motor 2,2 kW
workpiece spindle he...
grinding diameter 160 mm
grinding length 250 mm
centre height 80 mm
dimensions of grinding wheel 250x20x76 mm
max. workpiece diameter 250x20x76 mm
swivellable 90 °
grinding wheel speeds 2420 / 3290 U/min
Bwhhejbm8e
total power requirement kW
weight of the machine ca. 1,7 t
dimensions of the machine ca. 2,0 x 1,2 x 1,6 m
grinding diameter max.:200 mm
regulating wheel width:400 mm
max. width of grinding wheel:400 mm
max. depth of profile:15 mm
drive grinding spindle:50 kW
regulating wheel turning speeds:10 - 150 1/min
drive control wheel:3 kW
regulated wheel - helical adjustment: +2/-6 °
peripheral speed:31,5 / 63 m/sec
max. length of the working piece plunge grinding:500 mm
Xbuokiktm
weight of the machine ca.:10 t
CNC Control Siemens 840C CNC
with automatic plunge
with double-side hydrodynamic mounting by plai...
grinding diameter 400 mm
grinding length 1.100 mm
centre height 200 mm
Internal grinding attachment
Be7zfuxe7m
weight of the machine ca. 3 t
grinding diameter:600 mm
grinding length:4000 mm
centre height:320 mm
max. workpiece weight:3000 (zw. Spitzen) kg
max. workpiece weight:6000 (m. Lünetten) kg
grinding wheel diameter:760 mm
grinding wheel width:100 mm
Bxze9ht32t
grinding wheel speed:45 m/sec
table travel:4400 mm
table speed -stepless-:10~6000 mm/min
Rotation speed of workhead :8~80 1/min
tailstock quill stroke:100 mm
taper in tailstock-quill:6 MK
spindle drive:22,5 kW
Weight approx.:14,1 t
dimensions:13000x2900x1800 mm
CNC contro...
Cylindrical grinding machine, external cylindrical grinding machine, internal cylindrical grinding machine, centering grinder, center grinder
Ybnjxu9x
-Image below: MK5
-grinding wheel mount:
-Motor data: 0.3 kW 1380 rpm
-Dimensions: 370/180/H480 mm
-Weight: 36 kg
grinding diameter max. 100 mm
regulating wheel width 127 mm
max. width of grinding wheel 305 mm
Control NUM CNC 1020
total power requirement 25 kW
weight of the machine ca. 6000 kg
dimensions of the machine ca. m
W M W - MIKROSA
Centreless Grinder with Thru-Feed Grinding Device
Model SASL 125 / 1 A
Year approx. 1985 / in 2000 modernized S/Nr. 16.46-70-57
_____
Grinding Ø regular/maximal 2 80/120 mm
Max. length of workpiece for Thru-Feed-grinding 350 mm
Max. length of workpiece for plunge...
Catalog No. : 5604
Type: RFH 300
Producer: Schaudt
Made in: 1963
Characteristic:
Maximum grinding length: 350 mm
Maximum grinding wheel diameter: 300 mm
Max. diameter of workpiece: 160 mm
Tip height: 100 mm
Equipment:
Bynyo2rpqp
Tips
Collets
2-3 disks with flanges
grinding diameter:520 mm
grinding length:1000 mm
centre height:260 mm
weight of the machine ca.:10 t
dimensions of the machine ca.:20 m
Bfwi330cde
workpiece weight max.:500 kg
work piece spindle speed:1000 U/min
grinding wheel diameter:750 mm
grinding wheel width:200 mm
centre distance 750 mm
max. 400 mm
100 mm breit mm breit
weight of the machine ca. 4 t
Pazz9
:Omicron CNC 3206 | Omicron CNC 3210
grinding diameter:315 mm
grinding length:600|1000 mm
centre height:160 mm
swing over bed:315 mm
max. workpiece weight:120 kg
grinding headstock:_____ __
grinding wheel size:450 x127 x min.20-max.50 mm
grinding spindle speed:600-1600 (stufenlos) 1/min
feed per revolution of handwheel:0,001/ 0,01 / 0,1 mm
grinding head swivellable +/-:±180 °
automatic feeds:0,2-3000 mm/min
workhead:_____ __
workhead - spindle speed:0-600 (stufenlos) 1/min
swiveling workpiece...
Cylindrical grinding machine, external cylindrical grinding machine, internal cylindrical grinding machine, center grinder, center grinder
Yrqu0w
-Max. Shaft diameter: 320 mm
-Max. Grinding length: 345 mm
- Chuck size: O 133 mm
-Dimensions: 1925/1135 / H1755 mm
-Weight: 1592 kg
grinding diameter max. 35 mm
regulating wheel width 110 mm
max. width of grinding wheel 110 mm
total power requirement 10 kW
weight of the machine ca. 3000 kg
Xonpk
dimensions of the machine ca. m
grinding diameter max.:35 mm
regulating wheel width:250 mm
max. width of grinding wheel:250 mm
control:SINUMERIK 840 D
max. grinding length while plunge grinding:245 mm
grinding wheel diameter x width:450 x 250 mm
regulating wheel diameter x width:250 x 250 mm
grinding wheel power:15 kW
Machine bed made of mineral casting
- thermostable and vibration damping
- Foundation area 3,200 x 2,000 mm
- Coolant discharge height approx. 500 mm
- integrated bed flushing
- levelling elements
- Recesses f...
Universal cylindrical grinding machine with internal grinding device make MSO type FM 500
Machine # 24766 Year of construction 1966
Technical data:
centre height 125 mm
grinding swing - diameter 250 mm
grinding length 500 mm
grinding wheel size 300 x 30 x 127 mm
drive power 4,0 kW
weight approx. 1710 kg
outer dimensions approx. 1760 x 1150 x 1500 mm
with
- three-jaw chuck 125 mm
Dwvzyuttk
- internal grinding device
- several flanges with grinding wheel
- cooling device
used, in good condition
grinding diameter ca. 300 mm
grinding length ca. 800 mm
centre height 150 mm
control Fanuc
grinding spindle head:
grinding wheel diameter max. 400 mm
max. width of grinding wheel 63 mm
grinding wheel hole diameter 127 mm
engine output 7,5 kW
grinding wheel speed 45 m/sec
adjustment of grinding head slide 355 mm
swivellable +45° / -15 °
workpiece spindle head:
tool adaptor MK 5
Spindlespeed 20 - 750 min/-1
swivellable 90 °
Tailstock:
tool adaptor MK 4
quill stroke 30 mm
axis stroke:
cr...
:Omicron E 600 | Omicron E 1000 | Omicron E 1500
grinding diameter:355 / 455 mm
grinding length:630 | 1030 | 1530 mm
centre height:180 / 230 mm
swing over bed:355 / 455 mm
max. workpiece weight:250 (300 opt.) kg
grinding headstock:_____ __
grinding wheel size:450 (500 opt.) x127 x min.20-max.80 mm
peripheral speed:33 m/sec
grinding spindle speed:600-1600 (stufenlos) 1/min
grinding head swivellable +/-:±180 °
infeed each handwheel rotation/division line:2 (0,05)/0,01 (0,002) mm
automatic fe...
Karstens K11-1000 year 1990
Etjnqvqh
Partially overhauled by company Weiß Rundschleiftechnik bought in 2015
Including the complete accessories.
Part size Max Ø200 x 1000mm
Price negotiable
grinding diameter 290 mm
grinding length 1500 mm
centre height 180 mm
total power requirement 12 kW
weight of the machine ca. 6200 kg
dimensions of the machine ca. m
Bdpbi2lc79
grinding diameter: 500 mm
grinding length: mm
centre height: 160 mm
swing diameter: 315 mm
centre distance: 1500 mm
max. workpiece weight: zwischen Spitzen: 250 kg
Bsg3fdam7n
revolution per minute of spindle head: 1.230 U/min
grinding head swivellable +/-: rechts/links °
tailstock quill taper ISO: MK 4
spindle headstock:
dimensions of grinding wheel: mm
grinding head swivelling: nein Grad
table-size: 2540 x 230 mm
table swivable approx.: rechts/links: 5°
table speed: 0,005 - 5 m/min.
longitudin...
