Cnc corner cleaner for sale
Your location was not identified (Edit)
2020
as good as new (ex-display)
ORBIT - III
Automatic machine for cleaning PVC surfaces and corners (single cutting set)
APPLICATION:
Cleaning of weld surfaces from corners of PVC profiles
FUNCTIONS:
- Hydro-pneumatic operation
- Automatic return to the starting position when cleaning is complete
- Centering system for correct positioning of the profiles at 45° to cut off the excess weld
Nmcyrnhn
- Pneumatic replacement of the cutting set
- Pneumatic clamps
The price given is the net price.
12-month warranty
EXW. Obodovo, Soś... more
2020
as good as new (ex-display)
ORBIT IV SA
PLC-controlled semi-automatic machine for cleaning corners and PVC surfaces
APPLICATION:
It is used to clean the surplus resulting from the welding of PVC profiles
FUNCTIONS:
⦁ Cleaning the lower, upper and outer surface of the profile with two independent cleaning devices
⦁ Memory capacity for 250 profiles
⦁ Touchscreen control panel
⦁ Easy and quick entry of the program into the profile to be cleaned using Özçelik Makina's own software
⦁ Adjustable cleaning speed
⦁ PLC control syst... more
2020
as good as new (ex-display)
ORBIT IV SA
PLC-controlled semi-automatic machine for cleaning corners and PVC surfaces
APPLICATION:
It is used to clean the surplus resulting from the welding of PVC profiles
FUNCTIONS:
⦁ Cleaning the lower, upper and outer surface of the profile with two independent cleaning devices
⦁ Memory capacity for 250 profiles
⦁ Touchscreen control panel
⦁ Easy and quick entry of the program into the profile to be cleaned using Özçelik Makina's own software
⦁ Adjustable cleaning speed
⦁ PLC control syst... more
bar material dia. 6 - 67 mm
bar length 1525 mm
Bfi0nl3qsv
Channel sizes . mm
voltage 400 V
total power requirement 0,4 kVA
weight of the machine ca. 350 Kg
dimensions of the machine ca. 2,15 x 1,10 x 1,20 m
- Fab.-No.: 27-0008
- the bar feeder unit was
installed at a CNC-Turning Center
Hwacheon HiTech 200B more
Machining centre vertical VHC 3 XTS
Producer: AXA - CNC stroje s.r.o.
YP: 2014
Control Heidenhain ... TNC 530
Clamping table surface ... 2200 x 700mm
Axis X ... 2600mm
Y axis ... 1000mm
Z axis ... 950mm
Bmvcfdlt38
Spindle speed ... 0-10000 / min.
controlled axes ... 5
cooling ... 15bar
SK 40
Main engine power ... 40kW
Magazine locations ... 36
Workpiece probe
Tool probe
The machine is in good condition, possible to test under power. more
axis stroke (X,Y,Z):2500x1300x190 mm
Number of spindle head vertical:1 St.
Stuh9w
Number of spindles head horizontal:0 St. more
new
With this remote control, all CNC controlled machines can be controlled in their basic functions; regardless of the various CAM software variants (e.g. WINPC NC from the company Lewitz).
Our wireless keyboard works with any CAM software, as the key assignment can be customized via hotkeys. The unnecessary carrying of a conventionally PC keyboard is therefore no longer necessary while the essential work on the machine.
8eg9w9d
The splash-proof and dust-protected IP65 enclosure of the remote con... more
CNC Machining Center weinig UNICONTROL 10
Location
Gorzów Wlkp.
Conditions of delivery
OWN RECEIVING
Cost of delivery
to be negotiated
Startup type
to be negotiated
Description
Comments
Longitudinal saw: 2800 rpm min., 3 kW, power take-off and slot spindle: 5 x 100 mm, 11 kW, 2.800 rpm. min., 1 spindle profiling: 6000 rpm. min., 11 kW, 2. Spindle profiling: 6000 rpm. min, 11 kW. "Angle windows, machining center
M3e8j
WEINIG UNICONTROL 10
Number of spindle spindles: 1
Number of spindles mold... more
2012
excellent (used)
Machining centre vertical VCC 1200
Producer: AXA - CNC Stroje s.r.o.
YP: 2012
Control Heidenhain ... TNC 530
Clamping table area ... 1350x500mm
Axis X ... 1200mm
Y axis ... 600mm
Axis Z ... 700mm
Spindle speed ... 30-12000 / min.
controlled axes ... 4
Bmu2l2cosf
IKZ ... 10bar
HSK 63
Magazine places ... 30
L x W x H ... 3300x2500x2700mm
Machine weight ... 10000kg
The machine is in good condition and can be tested under power. more
In good technical condition.
5 years old machine.
Manufacturer: CNC Pestal.
Plasma source Formica wdm203, compressor, suction and table 6x2m.
The machine is still live.
Bl8y8f8y9z more
IMMEDIATELY AVAILABLE STORAGE MACHINE
brand-new CNC cycle lathe
Manufacturer STYLE, Type Style350 ( 850 ) with CNC control STYLE
Designed for individual parts and small series
Simple and intuitive operation
Modern and ergonomic design
7 models with turning diameter from 300 - 1200 mm
centre distances between 500 and 5000 mm
Precise double prism guide
Stable cast iron bed with double prism
Full enclosure with CE marking
Optimal accessibility of the working area
Independent and functionally well t... more
Business card holder
Made in Baden - Württemberg
Capacity 10 business cards.
Can be used individually on the counter.
To place or lay down.
Can be screwed to the wall or advertising walls.
Available as complete package with base support plate for 2, 4, 6, 8, 10,12, for advertising purposes or for rental.
Special requests are possible.
Anodizing
Bmcj0hjt0r
Engraving more
CNC Machining Center IGM INDUSTRIA ENTER
Manufacturer IGM INDUSTRIA
Fvx9l8m2
Model / type of machine ENTER
Year of production 1996
Category machines CNC Machining Center
complete with tools and documentation
Angle machine for windows euros more
CNC WORKING CENTRE ; Doors, furniture, boards, kitchen tops, IMA BIMA 410/V /D 140/500CNC for UNFALLENESS (STOPS) DOORS PURE ADHESIVE working area X: 5,000Working area Y: 1,300Working area Z: 100Number of milling spindles: 1Independent Z-axes: 2Main motor kW: 18Rpm max rpm: 24,000Torque support: Ja4. Axis: C-axisTool clamping system: HSK-F63Tool change stations: 18No. of change units: 5Slot saw: Change unitLocking box unit: Change unitEdge banding unit: Separate Y-axisBanding height max mm: 64Ch... more
AVAILABLE ON REQUEST
brand-new CNC cycle lathe
Manufacturer STYLE, type Style 750 with CNC control STYLE
Service for commissioning etc. from
- Munich / Germany
- Erwitte / Germany
- Netherlands
Developed for individual parts and small series
Simple and intuitive operation
Modern, ergonomic and encapsulated design
Different models with turning diameter from 300 - 1200 mm
centre distances between 500 and 5000 mm
Precise double prism guide
Stable cast iron bed with double prism
Full enclosure wi... more
Production year 2018
Technical parameters:
Kerb weight 2800 kg
Dimensions
- length 5100 mm
- width 2500 mm
- height 2500 mm
Power supply 400 V, 50 Hz, 3 Ph + PE
Spindle power 8.5 kW (HITECO)
Linear tool magazine, fixed, 10-position, HSK63F cones
Work area X, Y X: 2100 mm; Y: 4100 mm
Head stroke Z 350 mm
Operating speed X: 80; Y 80; Z: 20 m/min
BECKER vacuum pump 250 m3/h (5.5 kW)
The equipment:
Frame and ribbed steel door electrically welded
AC servo drive
Planetary gear mechanism with planetary... more
Ingersoll Hansen Center 300 EDM CNC Erodiermaschine
Hersteller [manufacturer]: Ingersoll Hansen
Typ [ type]: Center 300
Steuerung [control unit]: MultiPulse Control
Baujahr[construction year]: 1997
+ Inkl. Handheld
+ Inkl. EROWA Preset Comfort 3D-22 / Robot X system EDM dynamic tooling system (optional)
+ Inkl. EROWA 3-D Koordinatenmesssysem (optional)
Bgwdgynkma
Vollständige Dokumentation ist vorhanden.
Besichtigung unter Strom kann kurzfristig erfolgen.
Für weitere Fragen stehen wir Ihne... more
GP CNC 1000B Premium retrofit cylindrical grinding machine
Condition: retrofitted (like new)
Make Karstens
Technical data:
Center distance: GP CNC 1000: 1100 mm
centre height: 180 mm, optionally other centre heights possible
max. workpiece weight between centres: 300 kg
max. workpiece weight flying including clamping device: 70 kg
Workpiece headstock: MK 4, optionally other tapers possible
Tailstock: MK 4
disc diameter: 400 mm / 500 mm
Wheel arrangement: different arrangements and numbers of whe... more
Centauro BETA CNC 3 Axis Automatic Swing Chisel Mortiser with Router - Milling Head. 2012 CE
Fully programmable 3 axis horizontal CNC swing chisel mortiser suitable for general joinery and furniture production. By a combination of automatic movement of the mortisting head in the x axis and an automatic gripper that positions the timber no manual movement or handling of the component is required other than loading and positioning the timber against the pneumatic reference stop and then unloadin... more
Bupi metal cleaning system, single bath system with return filter basket, hinged door, exhaust fan, automatic level control and oil separator. The wash item rotates via a friction wheel drive through the spray jet of the fixed nozzle pipes on all sides.
Very good used condition.
Wire basket Useful dimensions: 720 x 720 x 640 (H) mm
N32z9
max. payload 500 kg
Tank capacity: 200 litres
heating capacity: 6,0 kW more
Technical data
CNC - lathe plan
Make ZERBST
Type DP 1
Year of construction 1989
Control Siemens 840 6 (2014)
Workspace
Centre distance feed machine without tailstock swing over bed 1,400 mm swing over bed slide 1.200 mm
Main drive
Power at 100% ED 55 kW
Main spindle
Diameter of front bearing 240 mm
Spindle bore 100 mm
Speed range 1 - 450 min-1
Max torque 25,000 nm
Transmission levels can be switched via M-function 4
Gear-unit stage 1 1 - 28 min-1
Gear-unit stage 2 3 - 71 min-1
Gear level 3 9 - 1... more
GP CNC-1000 Premium retrofit cylindrical grinding machine
Condition: retrofitted (like new)
Make Karstens
Technical data:
Grinding wheel protection flap(s) automatic, built into protective hood
Center distance: GP CNC 1000: 1100 mm
centre height: 180 mm, optionally other centre heights possible
Max. workpiece weight between centres: 300 kg
Max. Workpiece weight flying including clamping device: 100 kg
Workpiece headstock: MK 4, optionally other taper possible
Tailstock: MK 4
Grinding wheel diame... more
Technical data:
Working width: 2050 mm
bending capacity: 8,0 mm
Bending: 6.0 mm
CNC control from SIEMENS
Diameter top roller: 205 mm
diameter middle roller: 190 mm
diameter of side rollers: 150 mm
Rolls hardened
mobile control panel with digital display
F2sq29sfe
Main engine power: 5.5 kW
CE Marking
Conical bending device
Dimensions (length x width x height): 4900 x 1350 x 1300 mm
Weight: approx. 4,3 to
The seller is not liable for writing or data transmission errors. The machine is in appearanc... more
2001
reconditioned (used)
Grid
width 150cm x height 185cm number 4 pieces
width 120cm x height 185cm number 4 pieces
width 110cm x height 185cm quantity 1 piece
width 100cm x height 185cm number 4 pieces
width 80cm x height 185cm quantity 2 pieces
width 60cm x height 185cm quantity 2 pieces
width 40cm x height 185cm quantity 2 pieces
L-piece
width 22cm x height 33cm quantity 1 piece
Partition wall yellow
width 220cm x height 200cm quantity 1 piece
Nyuvj
Gate
width 256cm x height 200cm quantity 1 piece
width 183... more
GP CNC-650 Premium retrofit cylindrical grinding machine
other centre distances (1000 mm / 1600 mm) on request
Condition: retrofitted (like new)
Make Karstens
Technical data:
Grinding wheel protection flap(s) automatic, built into protective hood
Center distance: GP CNC 650: 750 mm
centre height: 180 mm, optionally other centre heights possible
Max. workpiece weight between centres: 300 kg
Max. Workpiece weight flying including clamping device: 100 kg
Workpiece headstock: MK 4, optionally other ... more
DESCRIPTION
vertical machining centre make STYLE,
Type MC1000 immediately available
Different versions possible
Factory service for commissioning and training from Germany
TECHNICAL SPECIFICATIONS
Travel X,Y,Z 1000 x 560 x 590 mm
Table size 1200 x 520 mm
max. spindle speed 10000 / 12000 rpm
EQUIPMENT
The machine has the following equipment
spindle 10000 rpm, 15 KW
Cooling through the spindle 70 bar
Large vertical tool changer High-speed with 30 tools
Hinged belt chip conveyor
Switch cabinet and... more
Vacuum suction cups for Biesse CNC machines are sold
all thicknesses (24mm, 29mm, 48mm, 74mm) and all sizes (also special sizes)
2rr97i
Suction cups are produced in Austria and impress with:
-very low price
- Absolutely dimensional accuracy
-high coefficients of friction against slipping due to large-area rubber coating
-in the event of a collision, less damage to the spindle and tool because it is easy to machine
price on request or cncsauger.at more
CNC Tool Clips HSK63F Toolholder Forks for Tool Changer Replacement
CNC tool clips also are named toolholder forks, tool holder gripper, tool forks, plastic tool holder, tool holder cradle, tool holder fingers, tool holder claw, tool Holder clamp, they are all means the holder clip for auto tool changer tool station.
As there are many types of CNC tool holders, so there are a lot of toolholder clips accordingly.
How to select the correct toolholder fork for your CNC machine? There are mainly 4... more
GP CNC 650B Premium retrofit cylindrical grinding machine
Condition: retrofitted (like new)
Make Karstens
Technical data:
Center distance: GP CNC 650: 750 mm
centre height: 180 mm, optionally other centre heights possible
Max. workpiece weight between centres: 300 kg
Max. Workpiece weight flying including clamping device: 70 kg
Workpiece headstock: MK 4, optionally other tapers possible
Tailstock: MK 4
disc diameter: 400 mm / 500 mm
Wheel arrangement: different arrangements and numbers of wheels... more
CNC lathe WEILER 160 CNC
Bjnr7ekfk3
SIEMENS 810 T path control
Year of construction: 1985
SeNr .: 081 more
Technical data:
Shaft diameter: 105 mm
Profile roller shaft diameter: 180 mm
hydr. driven, adjustable and synchronized rollers: 3
Bending speed: 3 m / mm
CNC control
programmable axes for automatic spiral pipe production
laterally hydr. adjustable correction arms
horizontal support for coiled tubes with hydr. passage and height
mobile control panel with 15" digital display
Dimensions (length x width x height): 2800 x 2900 x 2700 mm
Weight: approx. 16,5 to
Accessories:
Brp0rs9c
one set of tools e... more
CNC Vacuum Suction Cup Block Pods for PTP CNC Processing Machines
This CNC vacuum system is vacuum suction cups for wood working CNC router machines. The vacuum block pads is very suited for handling of workpieces in wood processing, such as furniture parts, floor boards, MDF, and particle board etc. CNC vacuum suction pods are widely used in the wood industry for vacuum suction clamp during machining, sanding etc with P.T.P. cnc machining center with vacuum pods bars. You are easily to find th... more
Part cleaning machine Fabr. Barca CLEANER type 4
Fabr.# 6016 year 1978
Technical data:
usable Interior DRM. 1420 mm
Bcqxs9cx3i
useful interior height 740 mm
Square mesh basket 1050 x 1050 mm
Door opening width 1150 mm
Door opening height 830 mm
Rack load of 900 kg
Length content 400 l
Pump motor 11 HP
Injection pressure 4.3 ATM
Length upheaval 32 m³ / h
Heater 15 kW
Weight approx. 820 kg
External dimensions approx. 1670 x 1570 x 1730 mm
with
-Timer
-Adjustable thermometer
-hinged door
used, rea... more
GP CNC 300 Premium retrofit cylindrical grinding machine
Condition: retrofitted (like new)
Make Karstens
Technical data:
Center distance: GP CNC 300 to 380 mm
centre height: 180 mm, optionally other centre heights possible
Max. workpiece weight between centres: 300 kg
Max. Workpiece weight flying including clamping device: 70 kg
Work headstock: MK 4, MK 5
Tailstock: MK 4
pulley diameter: 400/500/600 mm
Disc arrangement: left for straight stitch machine, right for inclined stitch machine 30 degre... more
Bosch CP/MEM card
Mat.Nr. 056307-104-401
Original storage battery was replaced by own construction
Condition: used / ready to use
This offer is aimed exclusively at commercial people.
Prices are net.
We will gladly create an individual offer for you.
To do this, please send us your complete contact information.
Bc8ny83wcs
Offer staying free, intermediate sale is reserved.
Internal No.: 1147 more
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Machineseeker now also sponsering Greuther Fürth
Sample sales contract for used machines in nine languages
New Machineseeker.com TV commercial with Michael van Gerwen
10 valuable tricks for buying used machines online
Photo gallery: the 10 strongest forklift trucks in the world
