Used Circular Table Saw for sale (40,145)

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Outside Rollers table for pre-loading (mm 4500 x 2200 ca.) Lifting table (mm) 4300 x 2200 Turning device (rotating unit) at 90° No. 2 Rear pushers (one with clamps / grippers) Twin Pusher No. 10 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 135 Max clamps opening (mm) 133 Gtjdpfjq Rfahex Agbst Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 460 mm - Kw 27 Adjustable speed of the saw carriage (m/min) 0 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 36 (ca.)

Condition: new, saw blade diameter 350 x 32 mm capacity degrees: round 1 mm capacity degrees: square 95 x 95 mm capacity degrees: flat 180 x 95 mm capacity degrees: round 110 mm capacity degrees: square 95 x 95 mm Gjdpfsxaab Sox Agbett capacity degrees: flat 125 x 95 mm capacity 60 degrees: round .0 mm capacity 60 degrees: square x mm capacity 60 degrees: flat x mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2600x3010x1250 mm Weight 500 kg Gtsdpfxsvz Hlws Agbet Total power requirement 3,8 kw

Condition: excellent (used), Saw blade Ø: 370 mm Cutting capacity at 90° round: 120 mm square: 100 mm rectangular: 180 x 100 mm Gtedpfsx Ek A Tjx Agbet at 45° round: 120 mm square: 100 mm at 60° round: 110 mm square: 90 mm 2 saw blade speeds: 15/70 rpm Drive motor: 400 V, 1.8/2.2 kW Required space: 1000 x 1000 x 1800 mm Weight: 390 kg

Condition: used, Year of construction: 2001, sliding table length: 3000 mm cutting width at the fence: 1300 mm cutting width at the cross cut: 3200 mm cutting depth: 145 mm Gjdpfxex Edlxj Agbett scoring unit: Ja height adjustment sawblade: elektrisch tilting adjustment sawblade: elektrisch adjustment fence: elektrisch adjustment crosscut fence: manuell read out tilting: Digitalanzeige read out sawblade height: Digitalanzeige read out crosscut: digital Anzeige Ablänglineal: Scala sawblade diameter: 450mm speeds: 4 motorpower: 5,5kW suction connection: 80 und 120mm machine length: 3600mm machine width: 2200mm weight: 1200 kg

Condition: good (used), Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, table saw saw unit: 45° pivotable Gjdpfxem Sk Hyj Agbett -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 250 mm, (max. Ø 300 mm) -Cutting height: 70 mm (max. ca. 100 mm) -Cutting width: 345 mm -Miter cut: up to 45° -Chip extraction: with gate valve for connection to a central extraction system -Dimensions 1020/850/H1300 mm -Weight: 188 kg

Condition: ready for operation (used), Year of construction: 2013, This MACO VK370 AR ALU Circular Wood Saw was manufactured in 2013. It features a head motor of 5.5 kW, a trim roller motor of 0.75 kW, and a lubrication pump of 0.1 kW. The blade speed ranges from 20–120 rev/min with a maximum blade diameter of 370 mm. It operates at a working air pressure of 5–7 bar. Consider the opportunity to buy this MACO VK370 AR ALU Circular Wood Saw. Contact us for more information. Gtsdpfx Aex D Ehfegbst Application Types Sawing (Wood)

Condition: used, Year of construction: 1995, saw blade diameter 450 mm cutting diameter 130 mm cutting width 240 mm Gedpfx Agox I Sfuebjtt Cutting height 130 mm speed for saw blade 15 / 35 U/min weight of the machine ca. 0,85 kg dimensions of the machine ca. 1,2 x 1,2 x 1,85 m Cold circular saw with - Mitering device 45°/60° - Coolant system - 2 saw blades

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 850 kg Gjdpevz Hkmsfx Agbjtt Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Saw Diameter: 500 mm Motor Power: 4 kW Cutting Range of the 500 mm Diameter Circular Saw Cutting Capacity 0° (square) for solid material: 170 x 170 mm Cutting Capacity -45° (square) for solid material: 160 x 160 mm Cutting Capacity +45° (square) for solid material: 160 x 160 mm Cutting Angle: -67.5°, -45°, -30°, -22.5°, -15°, 0°, 15°, 22.5°, 30°, 45° Dimensions (without feeders): Width 825 mm x Depth 1074 mm x Height 1397 mm Saw Speed: 3000 rpm Motor: 4 kW, 50 Hz, 400V AC, three-phase (3PPE) power supply Gjdoxdciajpfx Agbott Machine weight: 220 kg Cutting disc diameter: 500 mm Cutting disc bore diameter: 32 mm Operating pressure in the pneumatic system: 6–8 bar Cooling system: The machine is equipped with an oil mist system to cool the cutting blade, which increases the tool's durability and performance. Note: A coolant tank is not included and must be installed by the customer.

Condition: like new (used), Carriage length 2550 mm Scoring unit Manual adjustment of blade angle Manual adjustment of blade height Gtsdpfx Aex Iutbjgbst Saw speed 4000 rpm Motor power 5 kW Maximum blade diameter 315 mm Year of manufacture 2016

Year of construction: 1980, condition: used, Circular saw with miter cut Gedpfxeixumvo Agbjtt Make KALTENBACH Type:KKS 400 M Year.ca.1980 Hydr.feed infinitely variable. Saw blade: 400mm

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 1800 kg Gtodpfx Aox D H Tijgbot This SCHÜCO PDG SET was manufactured in 2008. A robust circular metal saw featuring a motor speed of 2800 rpm and a saw blade diameter of 500 mm. Weighing 1800 kg, it is fully functional and has been regularly maintained. Available for viewing under power on site. Contact us for further details regarding this machine. Application Types Sawing

Condition: excellent (used), Catalogue number: 7548 TECHNICAL DATA Track width: 250 mm Shaft width: 250 mm Max saw blade diameter: 350 mm Saw blade bore diameter: 80 mm Max cutting height: 120 mm Table width with gap: 700 mm Table length: 1790 mm *From above: Ratcheting pawls Pressure roller, smooth Ratcheting pawls Pressure roller, smooth Shaft with sawblades Smooth pressure rollers: 2 pcs From below: Guide Smooth sliding roller Ratcheting pawls Track Central lubrication Feed motor: 1.1 kW Main motor: 30 kW Electric body lifting Manual saw shaft lifting Extraction nozzle diameter: 160 mm Overall dimensions (L/W/H): 2250x1700x2000 mm Weight approx.: 3000 kg Gsdovx Rcuopfx Agbott – German-made – Electric lifting of body and saw shaft – Smooth feed speed adjustment – Used multi-blade saw, in very good condition Net price: PLN 68,900 Net price: EUR 16,400 at the rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Gjdpfxjvz Hivj Agbott Weight 870 kg Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Blade diameter ⌀250 - 350/30 mm Scoring blade diameter (work only with ⌀300, 350 mm blade) ⌀120/20 mm Main motor power 4 kW Scoring motor power 0.75 kW Rotation speed 4000 rpm Rotation speed of the scoring blade 8800 rpm Blade tilt 0 - 45° Max. cutting length 3200 mm Moving table stroke 3400 mm Cutting width with longitudinal ruler 1250 mm Wedge ⌀350 mm Shaft flange diameter 87.5 mm Table stop ruler set to an angle of 90° - 45° accuracy ±1° Max. cutting height with ⌀300 mm blade 95 mm Max. cutting height with blade ⌀350 mm 120 mm Upper exhaust port diameter ⌀80 mm Lower exhaust port diameter ⌀100 mm Gtodpfov Dtuqsx Agbjt Weight 650 kg

Condition: excellent (used), Year of construction: 1999, O F F E R We can offer you, subject to prior sale and errors excepted, the following ex stock, without obligation: EISELE Circular Sawing Machine for Straight and Mitre Cuts Model: VMS 370 Year of manufacture: 2000 Max. saw blade Ø: 370 mm Gtedpfxex A H Rre Agbet Cutting capacity: - Pipes approx. up to 130 mm - Flat material: 200 x 100 / 140 x 100 mm - Solid material (square): 120 mm Note: For mitre cuts, cutting capacities may be somewhat reduced—up to max. 140 mm. Saw carriage stroke, manual, vertical approx.: 200 mm Saw blade speeds: 17–34 rpm Saw blade drive approx.: 2/2.6 kW Total drive approx.: 3 kW – 380 V – 50 Hz Weight approx.: 500 kg Accessories/Special features: • Adjustable saw head for mitre cuts at 30° / 45° / 90° via scale • Pole-changeable three-phase motor with max. 2.6 kW drive • Manual feed of saw carriage with long, adjustable lever • Manual workpiece vice, jaw width approx. 120 mm • Integrated coolant system with chip collection tray • Roller conveyor material feed approx. 2,000 mm • New saw blade installed, 2 spare saw blades included • Electrical system recently overhauled Ideal machine for locksmithing and metalworking shops. Condition: Very good – ready for demonstration – very smooth running Delivery: Ex stock, as inspected Payment: Net, strictly after receipt of invoice We look forward to your order. We also have larger EISELE cold circular saws and other (band/hacksaw/cold circular) saws in stock. Further saw machines always available—please enquire.

Condition: excellent (used), Year of construction: 2002, ALU-profile mitre saw Fabr.Dry Tech Type:355 MLS Year 2002. Saw blade dm.355 mm Cutting range round max.120 mm Gtedpfjtwn E Uex Agbjt Square max 120 mm X 120 mm

Year of construction: 2017, condition: ready for operation (used), General Data Measurements width 1420 Measurements depth 5250 Measurements height 1900 Machine weight 1260 Godpfsx D Sazox Agbstt Additional Equipment Pneumatic saw feed Clamping device:2 horizontal clamping cylinders 2 vertical clamping cylinders This RAPID DGL 200-E sawing machine was manufactured in 2017. It features a manual swivel range from 45° to 90°, a 500mm saw blade, and pneumatic saw feed. It includes both horizontal and vertical clamping cylinders, enhancing its versatility. Dimensions for the 3700mm cutting length are 5250 x 1420 x 1900 mm, and it weighs 1260kg. A robust choice for diverse cutting needs. Contact us for further details regarding this sawing machine. Application Types Sawing

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2000x3010x1250 mm Weight 400 kg Total power requirement 4 kw Godpfx Asvz Hgzegbett

Year of construction: 2007, operating hours: 18,879 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model n/a Gtedpsx D Etbefx Agbjt This KALTENBACH SKL 450 NA Circular Metal Saw was manufactured in 2007. It features a vertical saw principle with a rotating table for mitre and longitudinal cuts up to 180 degrees. The saw unit is mounted beneath the table, ensuring optimal cutting range utilization. It includes a hydro-pneumatic saw blade feed and a large viewing window for enhanced work area visibility. Ideal for sawing aluminum and non-ferrous metals. Contact us for more information about this machine. Application Types Sawing

Condition: ready for operation (used), Year of construction: 1996, This Emmegi Radial Star TU/6 was manufactured in 1996. A used double miter saw, it features a roller conveyor, clamping device, and upgraded PC control. Its design is precise, stable, and robust, ideal for detailed metal sawing tasks. Consider the opportunity to buy this Emmegi Radial Star TU/6. Contact us for more information. Application Types Sawing Gtodpfx Aex D D Ausgbot

Year of construction: 2019, condition: ready for operation (used), General Data Machine weight 1150 kg Gedsx D Iqpjpfx Agbett This Behringer PSU 450H was manufactured in 2019. It features a robust gear and worm gearbox driven by a 3-phase, 4.0/4.8 HP motor, ensuring durability and efficient operation. The user-friendly control panel includes handwheel controls for material stop and clamping pressure. Its hydraulic system is powered by a 2.4 HP motor with a 6.6-gallon pump. Additional features include a coolant system and a weight of 1150 kg. Contact us for more information about this machine. Application Types Sawing

Condition: ready for operation (used), Year of construction: 2019, overall weight: 1,500 kg, total height: 1,250 mm, working width: 930 mm, product length (max.): 2,200 mm, General Data Machine weight 1500 kg Measurements height 1250 mm Dimensions Machine Length 2200 mm Gedpox D E T Ujfx Agbstt Technical Specification Working Width 930 mm Feed Speed 12 m/min This WINTER MBS 930 was manufactured in 2019. It features a motor power of 22.0 KW and a spindle diameter of 74 mm. The saw blade diameter is 205 mm, and it operates at a speed of 2600 rpm. Feed speed ranges from 0 to 12 m/min. Ideal for precise wood cutting. Contact us for more information. Application Types Sawing (Wood)

Year of construction: 2014, condition: ready for operation (used), This RALC ITALIA CUTTING LINE LYBRA was manufactured in 2014. It features an automatic circular blade for cutting metal tubes, including solid, tubular, and profiled types. Key components include a bar loader up to 6500 mm, multiple cutting capabilities, and a Siemens PLC for enhanced control. Ideal for high precision metal cutting. Contact us for more information about this machine. Application Types Godpfxjx D Ivxj Agbett Sawing