Used Circular Table Saw for sale (40,211)

Condition: used, Technical details: Saw blade diameter: 350 mm cutting range 90 degrees: round: 110 mm cutting range 90 degrees: square: 85 x 85 mm cutting range 90 degrees: flat: 180 x 85 mm cutting range 45 degrees: round: links/rechts: 105 / 110 mm cutting range 45 degrees: square: links/rechts: 85 x 85 / 85x85 mm cutting range 45 degrees: flat: links/rechts: 130x85 / 130x85 mm hole of sawblade: 40 mm range of revolutions per minute - continous: 9 / 18 / 36 / 74 / 4step U/min rotary table: Ø 400 mm/min Gjdpfsu Nilyex Agboil table swivelabel +/-: 60° rechts und 45° links ° air-pressure connection: 7 bar total power requirement: ca. 2,2 kW weight of the machine approx.: 430 kg dimensions of machine: B: 0,7 x T: 1,01 x H: 2,1 m The circular saw is an electro-hydro-pneumatic semi-automatic circular saw with which miter cuts of up to 45° inwards or 60° to the right can be made on profiles and solid materials. Vertival circular saw Solid, heavy cast construction max. opening of the vice 180mm cutting counter vertical travel of the saw head: 200mm Vice opening width max. 180mm (jaw size W:220 x H:70mm) Operation via control panel *

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1613030264, Table saw elumatec TS 161/30 Saw blade diameter 280 mm Saw blade speed 3,200 rpm Power supply 230/400 V, 3~, 50 Hz Power output 1.05 kW Length 650 mm, depth 750 mm, height 1,300 mm, weight 130 kg Accuracy is achieved by cutting from below for 90° saw cuts and angled cuts Wide pivoting range of up to 45° to the left and 0° to the right The special pivoting mechanism with integrated turn table enables working from the front at any angle setting The back fence is adjustable to allow optimal use of the saw blade capacity for wide and flat profiles Pneumatic material clamping (vertical) Pulsed coolant system Maintenance unit Safety hood Pneumatic saw feed Gjdpfxox S Et Ts Agbeil The saw is ready for operation, saw blade was shrapened. Shipping of the machine possible (on demand)

Year of construction: 2009, operating hours: 36,000 h, condition: ready for operation (used), General Data Measurements width 1500 mm Measurements depth 4800 mm Measurements height 1900 mm Machine weight 2700 kg Additional Equipment Voltage: 400 V With automatic feed Residue bunker Coolant device Mitre cut Loading station, chain magazine with 20 compartments on the infeed side Discharge sorting station, discharge side with 5 m long apron conveyor and programmable discharge stations on both sides Minimum quantity lubrication including 2x shelfs from Kasto This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information. Application Types Sawing Gisdpex Rpdyjfx Agbel

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0-240-75-0703, type of input current: three-phase, input frequency: 50 Hz, NEW PRICE ONLY 79,000 EURO!!! Price valid only until January 30, 2026! Take advantage of this opportunity! We invite you to purchase a NEW and outstanding panel saw, the HOMAG SAW-TEC B-400 Pro Line, extended version for automatic storage handling. The SAWTEQ B-400 is a HOMAG panel saw with automatic loading, capable of executing cuts at high speed. The efficient SAWTEQ B-400 is designed for high-volume panel processing and delivers top-quality, finished cuts. It stands out for its reliability, precision, high power, and fast operation. The saw we are offering is BRAND NEW. It was purchased from HOMAG POLSKA Sp. z o.o. in 2020 and delivered directly from the manufacturer to our premises. The HOMAG POLSKA Sp. z o.o. service team only carried out the initial startup; the machine has never been used since. In the industry, neither this model nor the Homag brand requires an introduction—Homag is widely regarded as the global leader in the production of state-of-the-art, high-quality equipment. Our unit is exceptionally well-equipped with virtually every option available. A similar panel saw in the basic version costs between 100,000–110,000 EURO net (425,000–467,500 PLN net)*, while our extended version, prepared for automatic storage and with additional options, costs around 190,000 EURO net (807,500 PLN net)*. Key Benefits: - High throughput thanks to automatic loading and large saw blade projection - High efficiency with relatively compact space requirements - Designed for efficient material flow and precise logistics - Suitable for networked production environments We maintain direct contact and support from HOMAG for installation and commissioning at the buyer's location, if required. In our opinion, the discount we are offering—over 45% below the new price—makes this an extremely attractive proposition for anyone currently looking for a modern panel saw compatible with automatic storage, or for buyers not currently planning such an upgrade but who may wish to do so in the future. This equates to around 90,000 EURO net (approx. 400,000 PLN net)* in potential savings. The machine, of course, can operate without an automatic storage system. General sales information: - The device is BRAND NEW but manufactured in 2020; therefore, no warranty or guarantee is provided. - Returns are not accepted. - The listing price does not include VAT (23% VAT for Polish buyers), which will be added to the invoice—please check our price presentation in the listing. - Single owner. *EUR price based on the NBP exchange rate – 1 EUR = 4.25 PLN. Giodpsx Szvdofx Agbol Welcome to all Machineseeker users. We are new to MACHINESEEKER. We are not a furniture, manufacturing, or machinery trading company. We own numerous properties in Poland and operate as a real estate developer building houses and apartments in Warsaw (the capital of Poland). All machines in our listings are our property. We acquired them as part of settlements with our tenants in the furniture industry and are familiar with their history and condition, consistent with our descriptions. We remain in contact with manufacturers such as Homag, Otto Martin, OMC Machinery, and FANUM, who can provide additional support. Since we do not need these machines, our prices are very attractive—especially considering the machines are nearly new. We can assist with transport anywhere in Poland or the EU. You are welcome to inspect the machines before purchase. Kind regards.

Condition: excellent (used), Felder kappa 550 panel saw, format 4 Sliding table 320 cm, Gjdex Swzvspfx Agbsil Blade tilt and height adjustment motorized, Right-hand fence motorized adjustable up to 1600 mm, Main motor 7.35 kW, Max blade diameter 500 mm Used machine, in very good condition.

Condition: used, Year of construction: 2004, Fluid bed by Romaco Innojet. Model VENTILUS 800. Manufactured in 2004. Giedpfsx Sqyxjx Agbol Includes all accessories.

Condition: used, Year of construction: 2019, functionality: unexamined, Auction: Plant closure Roschmann, Gersthofen (Augsburg) Bid now – Sale to the highest bidder. Lot 2910010: Lot consisting of 1 used single mitre saw with conveyor belt in good condition. Shows minor signs of use and is suitable for precision cutting operations with pneumatic clamping and automatic feed assistance. Mitre saw: Elumatec TS161/21, year of manufacture 2019. Motor power: 1100 W, 4100 rpm. Feed system: Ruchser RU-LAP3 conveyor unit, 1.5 kW, 50 kg/m load capacity. Electrification: 400 V (saw), 230 V (RU), 50/60 Hz, 3.0 A + 4.5 A. Pneumatics: 7 bar air pressure, pneumatic clamping. Accessories: Integrated control panel, conveyor frame, length stop. Godpfxex N Nige Agbeil

Condition: new, Year of construction: 2026, Closed and safe sawing area for more safety due to legally prescribed saw protection device Anti-twist protection of the wood due to stamped barbs in the rocker Stable, torsion-resistant steel frame Trolley for easy transport Shock, scratch and weather resistant due to high quality powder coating Phase inverter Dimensions and weights Working height 700 mm Rocker support 740 mm Length approx. 1030 mm width/depth approx. 770 mm Height approx. 1095 mm Weight approx. 92,5 kg Drive Type of drive Electric motor with direct drive Electrical data Input power 5 kW Supply voltage 400 V Mains frequency 50 Hz Saw blade diameter 700 mm Cutting capacity Rocker roundwood 250 mm Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale Godpfjhkz Hijx Agbeil

Condition: used, Year of construction: 1996, machine/vehicle number: 96-02-044, Operator panel control: LCD screen, eye-level, swiveling, cutting width, cutting height, saw blade tilt Edging table: 3200 mm (double roller carriage with hardened chrome guides) Gsdpfox Ry Shjx Agbeil Cutting width: 1300 mm Main saw: ø250–400 mm, 5.5 kW, speed 3,000–6,000 rpm 0–46° NC electric adjustment: yes Scorer: none Parallelogram table: extendable 700 mm Length stop: angle stop with fixed 90° position, 2 stop flaps, cross-cutting up to 3500 mm Condition: Well-maintained machine, technically and functionally tested

Condition: good (used), Year of construction: 1993, operating hours: 7,120 h, functionality: fully functional, cutting length (max.): 4,500 mm, cutting width (max.): 4,500 mm, cutting width at rip fence: 3,200 mm, cutting height (max.): 100 mm, cutting height with scoring (max.): 100 mm, saw blade diameter: 400 mm, main saw diameter: 400 mm, overall weight: 3,000 kg, Equipment: scorer, A well-preserved machine with few working hours. It has been operated by a private customer since new. Gisdevvhfhepfx Agbel

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the aluminium profiles you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Giodpfemb U Tuex Agbjl Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø700 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture

Condition: used, functionality: fully functional, cutting length (max.): 2,800 mm, SECOND-HAND CIRCULAR SAW ROBLAND MOD. E3100 Gsdpfxsx Rvkme Agbeil

Condition: new, Year of construction: 2025, Schnittbereich quadratisch (B x H): 2600 x 100 mm Gjdsxlcaujpfx Agbjil Kürzeste Länge des abgeschnittenen Stücks : 1100 x 20 mm Kürzeste Reststücklänge im automatischen Betrieb*: 400 mm Kürzeste Reststücklänge im Einzelschnitt: 40 mm Electrical connected load: 41 kW Leistung des Sägemotors: 30 kW Leistung hydraulischer Motor: 7,5 kW Schnittgeschwindigkeit stufenlos regelbar: 20-100 rpm Saw feed speed: 1-700 mm / min Höhe der Materialauflage: 720 mm Sägeblattdurchmesser: 425 mm Sägeblattbohrung: 50 mm Sägeblattdicke: 2,7 mm Length: 12000 mm Breite inkl. Späneförderer : 6300 mm Height: 3000 mm Weight of machine approx.: 28000 kg Standard configuration Variable blade speed controlled by inverterPrecision feed pressure & feed rate dual valve systemServo feeding motor with precision ball screwCombined guides with bearingsOil mist cooling de anti-vibration deviceP.L.C. control for all electric and hydraulic raulic pump with three-phase motorTwo sets of horizontal and vertical clamping devicesAdjustment baseRoller table

Condition: new, Year of construction: 2026, Cut-size circular saw with tiltable saw blade and high-quality sliding table made of anodized aluminum Cutting plane of the small-format circular saw directly on the roller table Precision-guided sliding carriage made of anodized aluminum, standard finish Large table arm guided on telescopic arm and longitudinally adjustable The standard table widening and table extension allow easy working with larger workpieces. The large dimensioned sawing unit made of grey cast iron is double mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground grey cast iron, therefore extremely robust and insensitive smooth running and precise cuts Giodpfx Agecnxamjbjl Aluminium sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail 10 years HOLZKRAFT warranty on wear of hardened guideways Telescopic stop Extendable aluminium telescopic stop Angle adjustable With two professional folding fences Rip fence Standard with fine adjustment and quick clamping Scope of delivery: Table extension Table extension Anodized aluminium sliding carriage Rip fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data table dimensions 1020 x 325 mm table height 900 mm working length 1660 mm Cutting height max. 90° with scoring 100

Condition: excellent (used), Year of construction: 2016, Format 4 Kappa 550 Positioning control e-motion – TFT screen Year of manufacture: 2016 320 cm sliding table 5.5 kW motor with brake Scoring unit control Max cutting height: 200 mm Saw blade: 250 - 550 mm Speeds: 3000 / 4000 / 5000 rpm Scoring blade rotation speed: 9000 rpm Motorized rip fence Saw blade tilting up to 45 degrees, single-sided Electric height adjustment Operator panel at eye level Crosscut fence with digital display Movable support rail with digital angle display Crosscut fence with length compensation Extraction connection: 120 mm and 100 mm Extension arm with swing-away function Cutting width: 1348 mm Crosscut fence up to 3200 mm Control station on sliding table Dimensions (without extension arm): 3400 x 2200 mm Gedpox Rugtefx Agbjil Weight: 1300 kg

Condition: used, Good day! 1 used Altendorf F 45 sliding table saw - Hydraulic height and tilt adjustment - Digital display (speed and tilt) - 4.5 m trimming length - Automatic star-delta start - 105 mm cutting height with 350 mm saw blade with scorer - 155 mm cutting height with 450 mm saw blade without scorer - 3000/4000/5000/6000 rpm - Automatic motor brake - Rip fence with fine adjustment - Parallelogram guard - Table extension and table width extension - Chassis - Extraction ports top and bottom - Trimming shoe - Adjustable handle on the sliding carriage - Operating tools - Operating manual/spare parts list New parts: - Narrow extraction hood 90° 181.00 + 19% - Wide extraction hood 45° 268.80 + 19% - Poly Flex V-belt 11W875 35.50 + 19% - Flat belt for scorer 32.50 + 19% - Gas pressure spring 50N for scorer 45.30 + 19% - GUHDO saw blade 350 mm 78.50 + 19% - Saw spindle new bearings fitted 250.00 + 19% - Scorer new bearings fitted 150.00 + 19% Special equipment: - 7.5 kW 380 Volt motor New price: €1,350 + 19% Giedpfx Asx Rt E Uogbel - Scorer New price: €3,150 + 19% - 4.3 m sliding carriage New price: €4,250 + 19% - Pneumatic pressure beam 3.2 m New price: €3,800 + 19% - Rip fence with fine adjustment 1.3 m New price: €580 + 19% - Duplex double-sided mitre fence New price: €1,350 + 19% - LASER cut line indicator New price: €2,300 + 19% - Circular saw feed Panhans Type 76 New price: €4,665 + 19% Price: €13,800 + 19% VAT The machine has been technically inspected, cleaned, adjusted, and newly painted. Cables and plug included – ready for immediate use. Payment by cash or bank transfer prior to collection/shipping only. The machine is sold without any warranty or guarantee. Please send me a brief message. Thank you!

Condition: new, Year of construction: 2026, Supercharge your aluminium cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the aluminium size you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system Gjdpfx Aemb U Tfogboil • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: AB/203002, cutting length (max.): 3,200 mm, SECOND-HAND CIRCULAR SAW SCM MOD. SI450 EP CLASS - Carriage mm. 3200 - Motor Hp 10 - Inverter for speeds change - Motirzed scoring unit adjustement - Serial number AB/203002 Gijdex Runqopfx Agbsl - Year 2010 (CE)

Condition: good (used), PANHANS is a German manufacturer of high-quality woodworking machines - since 1918. PANHANS circular saws were once market leaders in Finland, with hundreds of saws supplied to various woodworking shops. Now PANHANS is back through Delmac. The PANHANS 680 is the factory's modern entry-level saw, which can be configured into a high-quality circular saw to meet every requirement. The basic machine features a 3200 mm sliding table with accurate round guides. The robust saw unit delivers strong performance, allowing smooth cutting of even thick oak planks. The rip fence can be manually operated, equipped with a digital display, or NC-controlled via a TOUCH SCREEN control panel. If you demand a German-made saw and want only the best, PANHANS is an excellent choice. The V 91 is PANHANS’s flagship model, featuring a blade tilt of +45.5 / –45.5 degrees—if this is what you're searching for, PANHANS is the way to go. Giedpfex Rrdpox Agbol Let us know your cutting requirements— we can supply you with high-quality and cost-effective saws tailored to your needs, at competitive prices through Delmac.

Condition: new, Year of construction: 2026, functionality: fully functional, 11 kW = 15 HP Cutting height: 200 mm Saw blade diameter: 550 mm with raker teeth Cutting width to parallel fence: 1500 mm Sliding table length: 3200 mm Sliding table mounted on hardened steel rollers (similar to Altendorf) Giedpecyd Ncofx Agbsl The large crosscut fence on the sliding table can be swiveled 45° left and right Electric height adjustment Electric tilting adjustment up to 45° Digital inclination display Machine weight: 1250 kg

Year of construction: 2019, condition: ready for operation (used), Additional Equipment Starter Kit 1 consisting of 2 circular saw blades and 10 liters of coolant concentrate. Leveling element (1 set = 4 pieces) with stud bolt M 12x100. Feed side – left. Feed roller conveyor URB 290, Length 3000 mm. Feed adapter for URB 290/400. Outfeed roller conveyor URB 290, Length 2000 mm. Removal adapter for URB 290/400. Connecting piece for machine, attachment on the right. LM 55 M/man. Length stop, Measuring length 2000 mm. Giodpfx Aex Nr Sqogbol This BERG & SCHMID VKS 370 VA was manufactured in 2019. It features a fully automatic hydropneumatic vertical circular saw with CNC frequency conversion. The machine includes a roller conveyor on the feed side (3m) and discharge side (2m), enhancing material handling. Starter Kit 1 with circular saw blades and coolant concentrate is also included. Consider the opportunity to buy this BERG & SCHMID VKS 370 VA Circular Metal Saw. Contact us for more information. Application Types Sawing

Condition: used, functionality: fully functional, Year of construction: 2012, ADIGE CM 601 AUTOMATIC CIRCULAR SAW MAKE ADIGE, MADE IN ITALY MODEL CM 601 YEAR 2012 CONTROL ADIGE / SIEMENS MAX. CUTTING CAPACITY 12 – 202.0 mm MAX. CUTTING LENGTH 400.0 mm BAR LENGTH 6500.0 mm SAW MOTOR 7.5 kW PLUS Godpfxox Nnakj Agboil PART WEIGHING SCALE PARTS CONVEYOR BAR FEED

Condition: new, Year of construction: 2026, T460 Fully Automatic Solid Wood Saw 12 m Fully automatic cutting of medium-large timber with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of timber lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting Gijdpemcct Aefx Agbjl Model: T460 Length: 12 m Linear Unit: ProfiStop Omicron Material Length: 1123 mm Pushing capacity: 60 – 120 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: good (used), Technical data of the machine: Trolley length: 3000 mm Scoring unit Console Touchscreen control Cutting width on the right side: 1300 mm Electrically adjustable saw with 0–45° angle Electrically adjustable up/down saw Main motor: 4 kW Scoring motor: 0.75 kW Top/bottom extraction connection Electric brake DTR documentation Gisdpfx Aex Rhn Djgbsl

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-speed, high-safety, OHS compliant saw. A420 is a simple to use saw for small-profile cutting of straight or mitered aluminium parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° Gijdpfjmb U Tbsx Agbjl • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum chip extractor Highly suitable for: • Windows and doors manufacture • Commercial office manufacture • Data centres manufacture • Linear lighting manufacture • Blinds and shades manufacture • Composites manufacture