Used Charmilles Robofil 240 for sale (67)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 591.063.050.0035, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,850 kg, table length: 900 mm, Equipment: documentation/manual, Professional Wire EDM Machine AgieCharmilles CUT 300 (2012) Premium wire electrical discharge machining center from GF AgieCharmilles, ideal for precision manufacturing, tool & die making, and aerospace applications. Rbsdpowwq S Sefx Ahvjw

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 591.063.060.0016, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,800 kg, table length: 900 mm, Equipment: documentation/manual, The CUT P 550 model from 2017 is an advanced five-axis wire EDM machine, ideal for precise industrial applications: Rodpfx Ajwwrtwohvebw * wide angular range capabilities (up to 30–45°), * efficient and intelligent IPG generator, * accuracy within a few µm, * advanced automation systems and anti-collision protection, * stable, durable design enabling fully automatic operation.

Condition: reconditioned (used), Year of construction: 1999, operating hours: 25,984 h, machine/vehicle number: 125128, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 320 mm, workpiece weight (max.): 550 kg, total height: 2,790 mm, total width: 2,540 mm, total length: 1,910 mm, table width: 880 mm, type of input current: three-phase, table length: 560 mm, table height: 225 mm, workpiece length (max.): 880 mm, workpiece width (max.): 550 mm, workpiece height (max.): 225 mm, year of last overhaul: 2025, In very good condition: Refurbished Charmilles Roboform 2000+ completely refurbished with 16-fold RTC changer. Extensive maintenance according to dealer prescrition performed: all air-valves and tubing replaced, filters replaced, motors refurbished with new bearings and cleaned up, fans replaced, screen replaced. C-axis seals have been replaced and is accurately aligned again. This is a 64A machine. Software and documentation is provided, onsite installation including warranty can be discussed! Optionally floppy drives can be exchanged for USB drives. Tested and fully functional. Can be viewed and tested in working order. Immediately available! Rbsdpfew Ad Idex Ahvow

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 251070/641311, travel distance X-axis: 350 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, table width: 400 mm, table length: 500 mm, No minimum price - guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Travel distance X-axis: 350 mm Travel distance Y-axis: 300 mm Travel distance Z-axis: 300 mm Table dimensions: 500 x 400 mm MACHINE DETAILS Electrical data Operating voltage: 380 V Frequency: 50 Hz Rated current: 5 A Connection: 5 kVA Dimensions & weight Dimensions (L x W x H): 3,000 x 2,000 x 2,600 mm Weight: 3,000 kg EQUIPMENT Matching workbench Clamping devices Rbodpfexqpv Tjx Ahvsw Copper electrodes Documentation

Condition: good (used), Year of construction: 2000, Description table length 560 mm table width 400 mm amperage axis travel (X, Y, Z): 320, 220, 320 mm C axis 360° dielectric 290 l table load 300 kg voltage 400 V machine weight approx. 1950 kg approx. machine dimensions 1.65 x 1.60 x 2.45 m Rbsdpfxjxbm Uuo Ahvow Net prices open to reasonable negotiation Dwebiexbm Ubja A Hkmeb 1. Bench drill 2. Jungner grinder 3. SPC 20 grinder 4. Marking plate (table) 800x500 5. Maho 800 6. 2D dividing head Ø 300 7. 3D dividing head Ø 300 8. Tesa 700 height gauge 9. *Charmilles 200 sinker EDM 10. Charmilles Drill 11 sinker EDM 11. Metal band saw

Year of construction: 2001, condition: used, CHARMILLES, year of manufacture approx. 2001 Rodpfxsxr U Hme Ahvsbw

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours! TECHNICAL DETAILS Travel Distances X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 350 mm Workpiece Data Workpiece weight: 1,000 kg Workpiece height: max. 350 mm Workpiece width: max. 800 mm Workpiece length: max. 1,030 mm Table Data Table width: 630 mm Table length: 950 mm Rjdpfsx I Akusx Ahvsbw MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm Overall weight: 5,440 kg EDM hours: 11,537 h Power-on hours: 29,381 h Type of mains supply: 3-phase current EQUIPMENT Manual central lubrication for CUT E series Heat exchanger kit Large wire spool accommodation 25 kg, CUT E series Wire chopper for CUT E series Signal lamp Note: Dismantling and loading can be carried out by the seller at an additional cost.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 25,539 h, functionality: fully functional, machine/vehicle number: 0.2633/331852, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, total height: 200 mm, total length: 800 mm, total width: 500 mm, workpiece height (max.): 200 mm, type of input current: three-phase, overall weight: 2,200 kg, table load: 500 kg, positioning accuracy: 0.005 mm, Equipment: cooling unit, documentation/manual, fridge, CHARMILLES TECHNOLOGIES from 2001 Model: ROBOFIL 290 P 0.25MM AND 0.30MM WIRE EROSION MACHINE MAKE AN OFFER TO BUY BACK Features: - Maximum part dimensions: 850 x 500 x 200 [mm] Rodpfsv Rfm Sjx Ahvsbw - Maximum weight: workpiece weight: 500 [kg] - X x Y x Z strokes: 400 x 250 x 200 [mm] - U x V stroke: 400 x 250 [mm] - clearance/height angle: ±30 [°] / 200 [mm] - wire diameter: 0.25 [mm] - acceptable coil types: P3 and P5 - tank capacity: 300 [l] - generator: 10 [kVA] - 400/400V isolation transformer - dimensions: 1800 x 1600 x 2130 [mm] - weight: 2200 [kg]

Condition: ready for operation (used), Year of construction: 2015, operating hours: 10,615 h, functionality: fully functional, machine/vehicle number: 108.007.00.0065, travel distance X-axis: 1,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 800 mm, table load: 2,000 kg, spindle speed (max.): 10,000 rpm, The payment deadline for the machine is November 20, 2025! Placing a bid obligates you to collect the machine on time, between December 1, 2025 and December 5, 2025! Transport dimensions of the machine body (L x W x H): 4,500 x 2,900 x 3,200 mm TECHNICAL DETAILS Work Areas Travel X-axis: 1,600 mm Travel Y-axis: 900 mm Travel Z-axis: 800 mm Feed Drive Feed rate X-axis: 14 m/min Feed rate Y-axis: 14 m/min Feed rate Z-axis: 12 m/min Rapid traverse X-axis: 24 m/min Rapid traverse Y-axis: 24 m/min Rapid traverse Z-axis: 20 m/min Rjdpfexnkqaex Ahvobw Work Table Table dimensions: 1,700 x 850 mm Maximum table load: 2,000 kg Number of T-slots: 7 T-slot spacing: 100 mm Distance spindle nose–work table: min. 100 mm / max. 900 mm Spindle speed: max. 10,000 rpm Tool holder: ISO 40 Number of magazine slots: 30 Max. tool diameter without adjacent free spaces: 85 mm Max. tool diameter with adjacent free spaces: 150 mm Max. tool length: 305 mm Max. tool weight: 6 kg MACHINE DETAILS Control: HEIDENHAIN TNC 620 Dimensions & Weight Dimensions (L x W x H): 4,600 x 3,900 x 3,300 mm Weight: 16,000 kg Transport dimensions of the machine body (L x W x H): 4,500 x 2,900 x 3,200 mm However, the height can be reduced to 2,900 mm. Coolant system Capacity: 540 l Operating Hours Spindle hours: 10,615 h Power-on hours: 30,204 h EQUIPMENT 3D probe Technical documentation

Year of construction: 2001, condition: good (used), functionality: fully functional, Machine extensively overhauled worth EUR 18,000 Optional configuration QCRI 54/8: available, see pictures placement automation: available, see video Pressure flushing: 1 x through workpiece 1 x through electrode, 2 x lateral Suction flushing: 1 x through workpiece Central lubrication system automatically via NC in all axes Rbsdsn Arnxepfx Ahvow TECHNICAL DETAILS Travel (X, Y, Z): 350, 250 300 mm Max man. Feeding speed: 900 mm/min Weight of electrodes: max. 20 kg Weight of workpieces: max. 40 kg Magazine configuration: 54/8 electrodes: 54 pieces Electrode dimensions: 70 x 70 x 200 Plates: 8 pieces workpiece dimensions: (4x) 320 x320 x 270 mm, (4x) 320 x 320 x 170 mm work table: 500 x 400 mm T-slots: 3 x 12 mm distance of grooves: 125 mm Available clamping systems: Erowa IST 3R Macro Megatool GPS 70 MACHINE DETAILS Dimensions (H x L x W): 2400 x 1900 x 1690 mm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Heidenhain iTNC 530, working area X 600 x Y 450 x Z 450 mm, spindle mount CAT40, 24-position automatic tool changer, 20,000 rpm spindle, machine weight 6,100 kg, power connection 16 kW, main fuse 32 A, operating voltage 400 V, 50/60 Hz Rodpsw Hxzmefx Ahvsbw

Condition: ready for operation (used), Year of construction: 2005, Pallet changer TOOLPAL 3 R 12 compartment Rbsdpfx Aor Hngljhvow

Year of construction: 1985, condition: good (used), Beckslide travel; 240 mm Quill travel; 100 mm Rsdpfxsdy Dw Ej Ahvobw Table dimensione; 350x230 mm Longitudinal travel (x); 200mm Transverse travel (y); 120 mm Table load maximum; 100 kg Work tank dimensions; 520x350 mm Dielectric reservcircapacity; 68 l Hydraulic tank capacity; 5,6 l Dielectric pump flow 140l/min Weigt of generator P25 -125 kg Power requirements; Machine 1kVA Generator 2,2kVA Hydraulique pump pressure; 20 bars Weight with storage tank; 460 kg

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Redotylpijpfx Ahvsbw

Condition: refurbished (used), Year of construction: 1998, operating hours: 20,800 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, Machine currently undergoing revision at our facility in Semsales, Switzerland. Erowa ITS50 chuck. 16-position rotary tool changer, double gripper. Flat LCD screen. Retractable work tray. Inspection possible upon request. More details available on request. Rjdpfx Ahexlhudovobw

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Rodpstylpcjfx Ahvobw

Condition: used, TECHNICAL DETAILS - Travels on X/Y/Z axes : 400 x 300 x 350 [mm] - Rapid traverses rates (X/Y/Z) : 6 / 6 / 15 [m/min] - Min./max. distance between table and chuck : 170 / 520 [mm] - Max. part dimensions : 820 x 580 x 250 [mm] - Max. part weight : 800 [kg] - Max. electrode weight : 50 [kg] - C axis : 0 - 100 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 9.1 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 4.700 x 2.750 [mm] - Machine height : 2.680 [mm] - Machine weight : 3.830 [kg] - Number of working hours : 13659 [h] EQUIPMENT - CNC : AGIEVISION 5 - Workpiece loading / unloading robot - Spindle nose : EROWA Rbedpswl Rh Nofx Ahvjw - Dielectric capacity : 600 [l]