Used Charmilles Hd 8 for sale (61)

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 6.0138, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 462 mm, table load: 800 kg, controller model: CHARMILLES ROBOFIL 6020 SI, No minimum price – guaranteed sale to the highest bidder! This machine is being auctioned due to the closure of a business. Bidding commits you to timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Travel Paths Travel X-axis: 630 mm Travel Y-axis: 400 mm Travel Z-axis: 462 mm Travel U-axis: ±50 mm Travel V-axis: ±50 mm Workpiece Max. workpiece dimensions: 1,260 x 685 mm Max. workpiece height (immersed): 200 mm Max. load capacity: 800 kg Max. workpiece height between feedthroughs: 360 mm Measuring resolution: 0.5 µm Maximum manual speed: 15 mm/s Wire unwind speed Tension, taper offset Maximum workpiece height for wire threading: 300 mm Work tank dimensions: 1,355 x 760 x 425 mm MACHINE DETAILS Control: CHARMILLES ROBOFIL 6020 SI Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,700 x 2,900 mm Weight: 4,000 kg Electrical Details Operating voltage: 380/400 V Frequency: 50 Hz Rated current: 18 A EQUIPMENT Includes matching workshop drawer cabinet with accessories and documentation Pjdpexqalljfx Adnerd

Condition: ready for operation (used), Year of construction: 2001, operating hours: 25,539 h, functionality: fully functional, machine/vehicle number: 0.2633/331852, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, total height: 200 mm, total length: 800 mm, total width: 500 mm, workpiece height (max.): 200 mm, type of input current: three-phase, overall weight: 2,200 kg, table load: 500 kg, positioning accuracy: 0.005 mm, Equipment: cooling unit, documentation/manual, fridge, CHARMILLES TECHNOLOGIES from 2001 Model: ROBOFIL 290 P 0.25MM AND 0.30MM WIRE EROSION MACHINE MAKE AN OFFER TO BUY BACK Psdpfx Adev Rfm Sjnsrd Features: - Maximum part dimensions: 850 x 500 x 200 [mm] - Maximum weight: workpiece weight: 500 [kg] - X x Y x Z strokes: 400 x 250 x 200 [mm] - U x V stroke: 400 x 250 [mm] - clearance/height angle: ±30 [°] / 200 [mm] - wire diameter: 0.25 [mm] - acceptable coil types: P3 and P5 - tank capacity: 300 [l] - generator: 10 [kVA] - 400/400V isolation transformer - dimensions: 1800 x 1600 x 2130 [mm] - weight: 2200 [kg]

Condition: used, TECHNICAL DETAILS - Table dimensions : 900 x 600 [mm] - Dielectric capacity : 1200 [l] TRAVELS - Travels on X/Y/Z axes : 550 x 350 x 400 [mm] - Travels on U/V axes : 550 x 350 [mm] - Rapid traverses rates (X/Y/Z) : 3 [m/min] - Rapid traverses rates (U/V) : 3 [m/min] - Max. taper : +/- 30 [°/mm] PART - Max. part dimensions : 1200 x 700 x 400 [mm] - Max. part weight : 1500 [kg] Podpfx Aouhca Sednsrd WIRE GUIDE - Wire diameter : 0.15 - 0.33 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 12 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2600 x 2600 [mm] - Machine height : 2340 [mm] - Machine weight : 2850 [kg] MACHINE HOURS - Number of hours under power : 54450 [h] - Spark erosion hours : 4713 [h] EQUIPMENT - CNC : CHARMILLES - Screen : LCD 15'' TFT - Remote control

Year of construction: 2014, condition: ready for operation (used), - USED - CNC DIE SINKING EDM X-AXIS TRAVEL: 600 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 500 mm MAX ELECTRODE WEIGHT: 50 Kg MAX  PIECE WEIGHT: 2000 Kg MAX PIECE SIZE: 1200 x 800 x 350 mm Pedpfxjh St D Hs Adnord TANK SIZE: 1280 x 850 x 390 mm CONTROL UNIT: VISION 5 WEIGHT: 5500 Kg OVERALL DIMENSIONS: 1800 x 2900 x 3200 mm ACCESSORIES: C-AXIS NOTE: POSSIBILITA' DI AGGIUNTA MAGAZZINO CAMBIO ELETTRODI.

Year of construction: 2000, condition: ready for operation (used), Main Drive Prodpfx Adsxxnhwonsd Number of axis 3 This 3-axis CHARMILLES ROBOFORM 35 die-sinking EDM machine was manufactured in 2000. It features low working hours and comes with additional accessories including various UPC pallets, tool holders, a Diebold shrink wrapping machine, and a cooler. Consider the opportunity to buy this CHARMILLES ROBOFORM 35 die-sinking EDM machine. Contact us for more information. Application Types EDM

Condition: good (used), Year of construction: 2010, functionality: fully functional, CNC die-sinking EDM machine CHARMILLES Roboform 2400 Year of construction 2010 CNC control Charmilles Technical details Max. Workpiece dimensions 880 x 550 x 225 mm Table dimensions 560 x 320 mm Travel paths: Prsdpfx Aexwk Nzodnjd X 320 mm Y 220 mm Z 320 mm Weight 3,500 kg

Year of construction: 1992, condition: ready for operation (used), Travel X/Y/Z: 350mm/300mm/350mm, travel U/V: 400mm/250mm, max. taper angle: approx. +/-30°, max. workpiece dimensions X/Y/Z: approx. 850mm/500mm/400mm, max. workpiece weight: 500kg, wire diameter range: 0.1mm-0.3mm, feed rate: 15m/min, tensile force: 20N, max. threading height: 300mm. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2250mm, weight: approx. 2500kg, control: Charmilles. Documentation available. An on-site inspection is possible. Prodpfx Adexwywbenjd

Condition: used, Year of construction: 2011, Serial no. 107.88.00.177, control unit by Heidenhain, type iTNC530, 5 axes, travel X/Y/Z 800 x 600 x 500 mm, rotary/swivel table 280 x 280 mm, STEP TEC electrospindle, max. speed 42,000 rpm, 68-position tool changer, tool holder HSK 40, 40-position electrode changer, extraction system by Extor, type 4500-SMPIP, cooling unit, enclosure, BLUM laser measuring system, tool and accessory package, 2 rolling tables, sliding door cabinet (2-door), contents: tool holders, setup tools. Prodoxugy Dopfx Adnod

Condition: excellent (used), Year of construction: 1996, General Characteristics Total weight: 5,000 kg Maximum height: 2,900 mm Movements X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Positioning resolution: 0.001 mm Min/max traverse speed XYZ: 0/900 mm/min Standard glass optical scale Work Tank Dimensions (LxWxH): 1,500x1,000x600 mm Table dimensions: 1,200x800 mm Maximum distance between table and electrode holder spindle: 230/730 mm Table-to-floor distance: 750 mm Electrode Electrode weight on Z-axis: - Interface system: 350 kg - With C-axis and spindle: 50 kg Workpiece Maximum workpiece weight on table: 4,200 kg Maximum workpiece dimensions: 1,450x950x500 mm Dielectric Tank Capacity: 1,600 l Filtration system: paper filter Work tank capacity: 1,050 l Generator Maximum working current (peak): 128 A Pulse type: ISOPULSE Machine equipped with: • Multifunction remote control • Measuring cycles • Contouring • PROGRAM EXPERT 2 • PILOT EXPERT 2 • SPAC generator Year of manufacture: 1996 Psdpfx Adoxwmbtenjrd

Condition: excellent (used), Year of construction: 2001, operating hours: 27,265 h, functionality: fully functional, Charmilles Roboform 35 with QCRI robot Year of manufacture: 2001 Operating hours: 27,265 X, Y, Z travel: 355 x 255 x 305 mm C-axis with Erowa chuck Erowa chuck on the table Erowa probe Magnet 3 x aluminium Erowa pallets 320 x 320 mm 35 x electrode holders 50 x 50 mm Podpfx Adexvq Tdenerd QCRI robot 4 x pallet positions on the table 54 x electrode holder locations Documentation and diskettes Machine powered up for inspection

Year of construction: 2000, condition: ready for operation (used), General Data Measurements width 1900 mm Measurements depth 2350 mm Measurements height 1680 mm Machine weight 2500 kg Main Drive Number of axis 3 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 300 mm Workpiece Workpiece weight 500 kg Table Number of tslots 3 This 3-axis CHARMILLES Roboform 35 die-sinking EDM machine was manufactured in 2000. It features a stabilized cast iron machine bed, a C-axis with 360° rotation, and a maximum electrode weight of 50 kg. The machine offers X, Y, Z travel paths of 350 mm, 250 mm, and 300 mm respectively. Ideal for precision mold making with its robust construction and reliable performance. Contact us for more information about this machine. Psdpsxuavxofx Adnord Application Types EDM

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours! TECHNICAL DETAILS Prjdpfx Ajxu Uzcedned Travel Path Travel path X-axis: 600 mm Travel path Y-axis: 400 mm Travel path Z-axis: 350 mm Workpiece Data Workpiece weight: 1,000 kg Workpiece height: max. 350 mm Workpiece width: max. 800 mm Workpiece length: max. 1,030 mm Table Data Table width: 630 mm Table length: 950 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm Total weight: 5,440 kg EDM hours: 11,537 h Power-on hours: 29,381 h Type of input current: three-phase current EQUIPMENT 16 kg spools Note: Dismantling and loading can be carried out by the seller at an additional charge.

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, machine/vehicle number: 50163, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, overall weight: 4,000 kg, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Bidding obligates the bidder to collect the machine within the designated timeframe from 26.01.2026 to 29.01.2026! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 300 mm Travel Z-axis: 300 mm MACHINE DETAILS Electrical Data Operating voltage: 380/400 V Frequency: 50 Hz Rated current: 80 A Connection: 12 kVA Prodpfx Aexqp R Dednjd Tank dimensions (L x W x H): 900 x 500 x 600 mm Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,700 x 2,500 mm Weight: 4,000 kg EQUIPMENT Documentation

Condition: used, functionality: unexamined, Spark erosion machine Manufacturer: Charmilles Technologies Model: Form 2 – LC Year of manufacture 1992 Generator: 50A Space requirement: 1200 x 1300 x 2200 mm (LxWxH) Weight: 1100kg Work basin: 800 x 480 x 250 mm (LxWxH) Travel paths X/Y/Z: 300 x 200 x 150 mm Electrode weight: max. 60 kg Workpiece weight: max. 500 kg Equipment: - 3-axis digital display Heidenhain VRZ 760 - System 3R clamping device - Machine light - Fire extinguishing device The machine can be demonstrated on site under power. All information without guarantee Subject to errors and prior sale Prodjvld Iwspfx Adnjd

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Technical Specifications Travels (X / Y / Z): 350 × 250 × 256 mm U / V Axis Travels: ± 70 mm Max. Workpiece Dimensions (LxWxH): approx. 750 × 550 × 250 mm Max. Workpiece Weight: approx. 450 kg Table Size: 620 × 400 mm Wire Diameter: 0.15 – 0.33 mm (commonly 0.25 mm) Max. Taper Cutting Angle: ± 30° at 100 mm height Positioning Accuracy: ± 2 µm Psw N Hjxdubzjl Icsrb Wire Threading System: Fully automatic, fast, reliable Generator: Intelligent GF AC Cut, real-time spark control Surface Finish: up to Ra 0.1–0.2 μm (after finishing cuts) Control System: AgieVision (ergonomic, touch display, 3D graphics) Dielectric: Deionized water Machine Dimensions (LxWxH): approx. 2200 × 2200 × 2200 mm Prodpfx Adext Hz Soned Machine Weight: approx. 3500–4000 kg

Condition: excellent (used), Year of construction: 2021, operating hours: 537 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 650 mm, travel distance Z-axis: 200 mm, total height: 2,215 mm, total length: 2,820 mm, total width: 1,700 mm, wire diameter (max.): 0.2 mm, workpiece height (max.): 510 mm, workpiece width (max.): 510 mm, workpiece length (max.): 510 mm, type of input current: three-phase, overall weight: 3,220 kg, empty load weight: 3,320 kg, feed length X-axis: 650 mm, feed length Z-axis: 200 mm, feed rate X-axis: 240 m/min, feed rate Z-axis: 240 m/min, table load: 500 kg, input voltage: 400 V, working range: 510 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, tank capacity: 930 l, cutting speed: 240 mm/min, travel speed (max.): 240 mm/min, input frequency: 50 Hz, input current: 11 A, Equipment: documentation/manual, 2021 Agie Charmilles CUT AM 500 Wire EDM Machine Discover premium Swiss precision with this 2021 Agie Charmilles CUT AM 500 CNC Wire EDM Machine This high-performance wire EDM machine has only 537 erosion hours and comes from a medical device manufacturing environment, ensuring meticulous maintenance and minimal wear. Ideal for high-precision applications in medical, aerospace, automotive, and mold-making industries. Machine Overview Make/Model: Agie Charmilles CUT AM 500 Machine Type: CNC Wire EDM Machine Year: 2021 Control System: GF Control Erosion Hours: 537 hrs Condition: Very Good – ready for immediate operation Technical Specifications Work Area Pjdpfjxtfwxsx Adnjrd Max. part dimensions: 510 x 510 x 510 mm Max. part weight (base + parts): 500 kg Dielectric level (min/max): 250–305 mm Performance Max. machining speed: 240 mm²/min Surface roughness (Ra):

Year of construction: 2001, condition: used, CHARMILLES, year of manufacture approx. 2001 Prsdpfxexr U Hms Adnod

Year of construction: 2007, operating hours: 37,000 h, condition: ready for operation (used), General Data Measurements width 2810 mm Measurements depth 2600 mm Measurements height 2080 mm Machine weight 4450 kg Main Drive Number of axis 3 Pedpfjxmbvqsx Adnjrd Movement X-Axis Movement 550 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Workpiece Workpiece X 1200 mm Workpiece Y 400 mm Workpiece Z 700 mm Workpiece weight 1500 kg Injection Unit Injection pressure 2/4/8/13 bar This 3-axis CHARMILLES Robofil 440 CC was manufactured in 2007 and features a robust design with a total system weight of 4450 kg when filled with dielectric. It can handle workpieces up to 1500 kg, with maximum dimensions of 1200 x 700 x 400 mm. Ideal for precision wire EDM processes, this machine offers a comprehensive control system with a TFT 12" screen. If you are looking to get high-quality EDM capabilities consider the CHARMILLES Robofil 440 CC machine we have for sale. Contact us for more information. Application Types EDM

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 251070/641311, travel distance X-axis: 350 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, table width: 400 mm, table length: 500 mm, No minimum price - guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Travel distance X-axis: 350 mm Travel distance Y-axis: 300 mm Travel distance Z-axis: 300 mm Table dimensions: 500 x 400 mm MACHINE DETAILS Prodpfoxqpv Tsx Adnod Electrical data Operating voltage: 380 V Frequency: 50 Hz Rated current: 5 A Connection: 5 kVA Dimensions & weight Dimensions (L x W x H): 3,000 x 2,000 x 2,600 mm Weight: 3,000 kg EQUIPMENT Matching workbench Clamping devices Copper electrodes Documentation

Condition: good (used), Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 2,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 1,000 mm, workpiece length (max.): 1,380 mm, Charmilles Robofil 690 - Maximum part dimension 1380 x 1000 x 400 - Travels X,Y,Z 800 x 600 x 600 x 400 - Travels U,V ±30 - Maximum demoulding ±15/110 - Global protection by EC-EMC cabinet Psdpfxowz Iuxj Adnjrd - Fixed work table - Integrated monobloc flange table - Guaranteed thermal stability; polymer concrete - 5 axes controlled by numerical control (XYUVZ) - Linear glass rulers on all axes - Axis protection by anti-collision system - Tilting up to ±30°. - ThermoCut (automatic threading and rethreading) - Bonina thread holder 4, 8 and 16Kg - Filtration system: 2 filters (29m2) - Water/water heat exchanger - Automatic regulation of deionization with cylinder - Numerical control CT Millenium (Fanuc) - 12" TFT color graphic touch screen - Hard disk 10GB - Remote control - Machining strategy PROFIL-EXPERT - Integrated CT-EXPERT technology - Automatic adaption of the PILOT-EXPERT generator - Digital generator control - Autorestart - Self-diagnosis - Integrated Ethernet card Additionals: Contact electrode Pinch roller Chiller Spare motor for U/V axis

Condition: reconditioned (used), Year of construction: 2007, operating hours: 16,730 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, total height: 275 mm, total width: 300 mm, total length: 300 mm, table width: 750 mm, Charmilles FO550S. 16-position rotary tool changer. Erowa ITS50 chuck. Machine currently being serviced at our premises in Semsales, Switzerland. Inspection possible upon request. Further information available on request. Prodpfx Aexmidpjdnjd

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 00402, travel distance X-axis: 450 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 162 mm, workpiece width (max.): 760 mm, workpiece length (max.): 1,100 mm, table load: 500 kg, No reserve price – guaranteed sale to the highest bidder! This machine is being auctioned as part of an operational closure. Placing a bid obliges the buyer to collect the item within the specified period from 26/01/2026 to 29/01/2026! TECHNICAL DETAILS Travel X-axis: 450 mm Travel Y-axis: 320 mm Travel Z-axis: 162 mm U-axis travel: ± 50 mm V-axis travel: ± 50 mm Max. workpiece dimensions: 1,100 x 760 mm Max. load capacity: 500 kg Max. workpiece height during immersion: 200 mm Max. workpiece height between wire guides: 360 mm Max. workpiece height for wire threading: 200 mm Tank dimensions: 1,150 x 200 x 2,280 mm Tank capacity: 1,000 l Prodpfx Asxqpvyjdnjd Measuring resolution: 1 µm Max. manual speed: 15 mm/s MACHINE DETAILS Control system: CHARMILLES Electrical data Operating voltage: 380 V Frequency: 50 Hz Rated current: 9 A Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,700 x 2,700 mm Weight: 5,000 kg EQUIPMENT Matching workshop drawer cabinet Corresponding accessories Documentation

Condition: refurbished (used), Year of construction: 2007, operating hours: 15,125 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 200 mm, total length: 260 mm, total width: 280 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, type of input current: three-phase, overall weight: 3,300 kg, Charmilles Robofil 440SLP, 2007. Prsdpfev Rbxwox Adnod Only 15,100 hours of work. Machine fully serviced and working. Viewable at our Semsales premises in Switzerland.

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 3003500029, travel distance X-axis: 650 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, table width: 460 mm, table length: 720 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates you to collect the machine on time between 26/01/2026 and 29/01/2026! TECHNICAL SPECIFICATIONS Travel X-axis: 650 mm Travel Y-axis: 300 mm Travel Z-axis: 400 mm Table dimensions: 720 x 460 mm Prjdpfx Asxqn Ibjdnod MACHINE DETAILS Electrical data Operating voltage: 400 V Frequency: 50 Hz Rated current: 18 A Connected load: 12 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,600 x 2,700 mm Weight: 5,000 kg EQUIPMENT Workshop drawer cabinet Documentation

Condition: ready for operation (used), Year of construction: 2015, operating hours: 10,615 h, functionality: fully functional, machine/vehicle number: 108.007.00.0065, travel distance X-axis: 1,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 800 mm, table load: 2,000 kg, spindle speed (max.): 10,000 rpm, The payment deadline for the machine is November 20, 2025! Placing a bid obligates you to collect the machine on time, between December 1, 2025 and December 5, 2025! Transport dimensions of the machine body (L x W x H): 4,500 x 2,900 x 3,200 mm TECHNICAL DETAILS Work Areas Travel X-axis: 1,600 mm Travel Y-axis: 900 mm Travel Z-axis: 800 mm Feed Drive Feed rate X-axis: 14 m/min Feed rate Y-axis: 14 m/min Feed rate Z-axis: 12 m/min Rapid traverse X-axis: 24 m/min Rapid traverse Y-axis: 24 m/min Rapid traverse Z-axis: 20 m/min Prsdpfx Adoxnkqaensd Work Table Table dimensions: 1,700 x 850 mm Maximum table load: 2,000 kg Number of T-slots: 7 T-slot spacing: 100 mm Distance spindle nose–work table: min. 100 mm / max. 900 mm Spindle speed: max. 10,000 rpm Tool holder: ISO 40 Number of magazine slots: 30 Max. tool diameter without adjacent free spaces: 85 mm Max. tool diameter with adjacent free spaces: 150 mm Max. tool length: 305 mm Max. tool weight: 6 kg MACHINE DETAILS Control: HEIDENHAIN TNC 620 Dimensions & Weight Dimensions (L x W x H): 4,600 x 3,900 x 3,300 mm Weight: 16,000 kg Transport dimensions of the machine body (L x W x H): 4,500 x 2,900 x 3,200 mm However, the height can be reduced to 2,900 mm. Coolant system Capacity: 540 l Operating Hours Spindle hours: 10,615 h Power-on hours: 30,204 h EQUIPMENT 3D probe Technical documentation