Used Robofil 200 Charmilles for sale (75)

Condition: good (used), Year of construction: 2004, functionality: fully functional, Charmilles Robofil 240 SL Year of manufacture: 2004 Travel ranges (X / Y / Z): 350 x 220 x 220 mm Travel ranges (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 220 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1000 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed of 300 mm²/min Best surface finish: Ra 0.22 µm Available wire diameters: 0.10 mm to 0.33 mm Bdedpozwv S Isfx Acnsg Dimensions of the complete system: 2020 x 2050 x 2000 mm Total weight of the system: 2450 kg The machine is currently in use at our customer's site and will be available from September. We would be pleased to offer the following services: - Cleaning and overhaul of the machine - Commissioning and training - Delivery - Clamping devices - Cooling unit - Transport

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Bdodpfx Aow Ucyujcnog Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: used, Year of construction: 2002, Travel ranges: X 350 mm Y 220 mm Z 220 mm Bdjdpjzumk Nsfx Acnjg Automatic rethreading Coolant bath without cooler

Condition: used, Year of construction: 2002, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, overall weight: 3,300 kg, input voltage: 400 V, For sale is a well-maintained CNC wire erosion machine, Charmilles Robofil 440 SL (CT-Millennium control), manufactured in 2002. The machine was used regularly in our production process and has been serviced accordingly. It is being sold due to capacity reasons. Travel ranges: X=550, Y=350mm, Z=400mm Bdodpfx Aszvw Ibecnjg Max. workpiece dimensions: 1200mm x 700mm x 400mm Taper cutting device: 30 degrees Wire spool capacity: 16/25 kg Work tank door with viewing window Water bath machine Automatic wire threading Includes wire aligner.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Charmilles Robofil 440 CCS Year of manufacture: 2011 Charmilles Millenium control system Travel distances (X / Y / Z): 550 x 350 x 400 mm Travel distances (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed of 340 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Dimensions of the complete system: 2600 x 2540 x 2240 mm Total weight of the system: 3300 kg After receiving your order, we will clean and completely overhaul the machine and test all functions. You will receive a 6-month warranty on the machine. Bodpfx Ajzruvujcnodg We would be happy to offer you the commissioning of the machine.

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, Charmilles Robofil 440 CC Year of manufacture: 2004 Charmilles Millenium control system Travel distances (X / Y / Z): 550 x 350 x 400 mm Travel distances (U / V): 550 x 350 mm Max. Taper angle: +/- 30° at a height of 400 mm Integrated Collision Protection (ICP) on all 5 axes Bjdpfxozrur Ns Acnodg Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Dimensions of the complete system: 2600 x 2810 x 2240 mm Total weight of the system: 3300 kg The machine has already been tested and serviced by us. Upon request, we offer you the following services: - Commissioning of the machine at your site - Control system training - Accessories such as coolers and clamping devices

Condition: ready for operation (used), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible. Bdedpfsuqackox Acnog

Year of construction: 2003, condition: ready for operation (used), A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible. Bdedpfx Acey R Dtconog

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, TECHNICAL DETAILS X-axis: 550 mm Y-axis: 350 mm Z-axis: 400 mm U-axis: 550 mm V-axis: 350 mm Machining Taper: ± 30° Bdedpfx Acezpxg Seneg Automatic wire threading and re-threading: Yes Maximum workpiece dimensions: 1,200 × 700 × 400 mm Control and Dielectric Fluid CNC control: CHARMILLES Dielectric fluid tank: 1,200 l Filter system: Cartridge filter MACHINE DETAILS Machine weight: 3,500 kg EQUIPMENT - Cooling unit

Condition: used, Year of construction: 2003, operating hours: 34,621 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 34621 Std Verfahrwege X 350 mm Y 220 mm Z 220 mm U 350 mm V 220 mm Bsdszkhltjpfx Acnodg Year 2003

Condition: used, Year of construction: 2003, operating hours: 25,407 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 25407 Std Verfahrwege X 350 mm Bedpfszkhgdsx Acnjdg Y 220 mm Z 220 mm U 350 mm V 220 mm Year 2003

Condition: used, Year of construction: 2001, overall weight: 3,350 kg, total length: 2,100 mm, total width: 2,000 mm, total height: 2,300 mm, CHARMILLES TECHNOLOGIES ROBOFIL 510with Charmilles control system. Travel paths X/Y/Z: 500 x 350 x 400 mm. Equipped with Erowa chuck, Erowa ITS rotary changer (24-fold), ManoSet XL, and a comprehensive clamping package. Includes additional flushing, water/water heat exchanger, and water cooling unit. Documentation available. Used, functional.Connection 3~ / 400 V / 50 Hz, power 10 kVA, current 15 A.Automatic wire tensioning, precise wire guidance, stable construction.Control console (Siemens), protective devices, emergency stop. Bodpfxjy S Axte Acnodg Travel X-axis: 500 - mm Weight approx.: 3,350 kg Control: CNC-Steuerung Dimensions (LxWxH) approx.: 2100 x 2000 x 2300 mm Travel Y-axis: 350 - mm Travel Z-axis: 400 - mm Year of construction: 2,001 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: reconditioned (used), Year of construction: 2010, operating hours: 27,000 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 200 mm, total length: 205 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, empty load weight: 2,450 kg, Machine fully cleaned, inspected, and tested. Available for viewing at our premises in Semsales (Switzerland). Wire guides, 0.25 mm. Bjdpfx Aozf Akyscnsdg Large bobbin kit.

Condition: used, Year of construction: 2005, operating hours: 18,950 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 18950 Std Verfahrwege X 350 mm Y 220 mm Z 220 mm Bdsdpswzyvhjfx Acnog U 350 mm V 220 mm Year 2005

Condition: used, Year of construction: 2002, Voltage: 400V / 50/60Hz / 3 phases Machining method: Immersion Maximum workpiece size: 1200x700x400 mm Maximum workpiece weight: 1500 kg Bdsdpfx Aoza U Nlocnjg Table dimensions: 900x600 mm Distance from floor to table: 900 mm Total dielectric fluid volume: 1200 L Axes X, Y, Z, U and V Travel ranges X, Y, Z: 550 x 350 x 400 mm Travel ranges U, V: 550 x 350 mm Collision protection: Axes X, Y, U, V, Z Tapered cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (Option 0.1/0.2/0.3 mm) Wire guide type: Closed diamond guide, gap-free Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 kg (P5) Dielectric fluid Paper filter: 2 cartridges Dielectric fluid temperature: +/- 1°C Total volume of ion exchange resin: 20 L Maximum injection pressure: 20 bar Generator: Dual source Isopulse Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 microns Ra Measuring system: Glass scales Measuring resolution: 0.5 microns Servo motors: AC type All technical specifications are subject to change without notice; errors and omissions excepted. The machine was fully functional until it was dismantled. Warranty is excluded.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, AGIECHARMILLES CUT 200 MS WIRE EDM MACHINE, YEAR OF MANUFACTURE 2015 MS MACHINE (TEMPERATURE-CONTROLLED) FIXED TABLE TRAVELS X 350 Y 250 Z 220 U 350 V 250 MM Bdsdpfjy Twf Rox Acneg MAXIMUM TAPER 30°/220 MM LINEAR SCALES AUTOMATIC THREADING AND RE-THREADING RE-THREADING HEIGHT 220 MM WIRE SPOOLS UP TO 8 KG RESIDUAL WIRE CUTTER WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 331965, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, wire diameter (max.): 0.25 mm, No reserve price – guaranteed sale to the highest bidder! Bdodpfxjyz Rxae Acnjg TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 250 mm Z-axis travel: 200 mm (U/V) axis travel: 400 x 250 mm Taper angle: +/- 30° at 200 mm height Workpiece weight: 500 kg Workpiece height (max): 200 mm Workpiece width (max): 500 mm Workpiece length (max): 850 mm MACHINE DETAILS Standard wire guides: 0.25 mm Dimensions & weight Dimensions (L x W x H): 1,800 x 1,600 x 2,180 mm Machine weight: 2,190 kg Injection pressure upper nozzle: 0 - 11.5 bar Injection pressure lower nozzle: 0 - 11.5 bar

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 350900, workpiece weight (max.): 1,000 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, wire diameter (max.): 0.25 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 250 mm Travel Z-axis: 400 mm Travel U-axis: 400 mm Travel V-axis: 250 mm Bdodpjyz Rvlofx Acnog Workpiece weight: 1,000 kg Workpiece height (max.): 400 mm Workpiece width (max.): 500 mm Workpiece length (max.): 850 mm Taper angle: +/- 30° at 400 mm height MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,600 x 2,230 mm Machine weight: 2,500 kg Standard wire guides: 0.25 mm EQUIPMENT Collision protection in X/Y/U/V/Z

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 400 mm, travel distance Z-axis: 250 mm, total height: 2,430 mm, total width: 3,340 mm, wire diameter (max.): 0.3 mm, overall weight: 4,170 kg, product length (max.): 4,010 mm, number of axes: 4, wire diameter (min.): 0.05 mm, This 4-axis CHARMILLES ROBOFIL 4030 Si was manufactured in 1999. It features a maximum workpiece dimension of 1200 x 700 x 400 mm and can handle a weight of up to 1500 kg. The machine is equipped with a wire diameter range of 0.05 – 0.30 mm and a maximum cutting speed of 500 mm²/min. If you are looking to get high-quality wire EDM capabilities, consider the CHARMILLES ROBOFIL 4030 Si machine we have for sale. Contact us for further details. • Workpiece: Bjdpoyvgl Tjfx Acnjdg • Max workpiece dimensions: 1200 x 700 x 400 mm • Max workpiece weight: 1500 kg • Axes travels: • Y-axis: 300 mm • U/V axes: ±48 mm • Wire EDM: • Max wire speed: 15 m/min • Max cutting speed: 500 mm²/min • Tank / dielectric: • Tank dimensions: 850 x 600 mm • Dielectric volume: ~800 l • Electrical: • Power consumption: 45 A

Year of construction: 2005, condition: excellent (used), functionality: fully functional, machine/vehicle number: 935089, - Wire EDM machine with automatic wire threading - Enclosed diamond wire guides for various wire diameters Bedpfxslru Rbo Acnjdg - Collision protection on all 5 axes (ICP) - Clamping accessories shown in the image are included in the scope of supply TECHNICAL DETAILS Travel ranges X / Y / Z: 550 / 350 / 400 mm Travel ranges U/V axis: 550 / 350 mm Taper: max. +/- 30° at a height of 400 mm Workpiece dimensions: max. 1200 x 700 x 400 mm Opening width: 1020 mm (accessible from one side) Workpiece weight: max. 1500 kg Surface quality: max. Ra 0.22 μm Cutting speed: max. 300 mm²/min Available wire diameters: 0.15 – 0.30 mm Control: Charmilles Millenium with Windows operating system (12” TFT touchscreen) MACHINE DETAILS Dimensions (length x width x height): 2600 x 2810 x 2240 mm Net weight: 3300 kg Connection voltage: 400 V / 3 phases / 50/60 Hz Connection power: 10 kVA LAN connection: included, for network integration

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 3003500029, travel distance X-axis: 650 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, table width: 460 mm, table length: 720 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates you to collect the machine on time between 26/01/2026 and 29/01/2026! TECHNICAL SPECIFICATIONS Bdsdjxqn Ibepfx Acnog Travel X-axis: 650 mm Travel Y-axis: 300 mm Travel Z-axis: 400 mm Table dimensions: 720 x 460 mm MACHINE DETAILS Electrical data Operating voltage: 400 V Frequency: 50 Hz Rated current: 18 A Connected load: 12 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,600 x 2,700 mm Weight: 5,000 kg EQUIPMENT Workshop drawer cabinet Documentation

Condition: good (used), Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 2,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 1,000 mm, workpiece length (max.): 1,380 mm, Charmilles Robofil 690 - Maximum part dimension 1380 x 1000 x 400 - Travels X,Y,Z 800 x 600 x 600 x 400 - Travels U,V ±30 - Maximum demoulding ±15/110 - Global protection by EC-EMC cabinet - Fixed work table - Integrated monobloc flange table - Guaranteed thermal stability; polymer concrete - 5 axes controlled by numerical control (XYUVZ) - Linear glass rulers on all axes - Axis protection by anti-collision system - Tilting up to ±30°. Bjdswz Iuxepfx Acnjdg - ThermoCut (automatic threading and rethreading) - Bonina thread holder 4, 8 and 16Kg - Filtration system: 2 filters (29m2) - Water/water heat exchanger - Automatic regulation of deionization with cylinder - Numerical control CT Millenium (Fanuc) - 12" TFT color graphic touch screen - Hard disk 10GB - Remote control - Machining strategy PROFIL-EXPERT - Integrated CT-EXPERT technology - Automatic adaption of the PILOT-EXPERT generator - Digital generator control - Autorestart - Self-diagnosis - Integrated Ethernet card Additionals: Contact electrode Pinch roller Chiller Spare motor for U/V axis

Condition: reconditioned (used), Year of construction: 2006, operating hours: 19,500 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 205 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, overall weight: 2,450 kg, Charmilles FI240SL, year 2006. The machine can be inspected at our premises in Semsales during April. The machine will be fully cleaned and serviced. Viewing available on request. Bsdpoylkr Tefx Acnodg

Condition: ready for operation (used), Year of construction: 1995, operating hours: 1,497 h, travel distance X-axis: 320 mm, overall weight: 3,450 kg, number of axes: 3, This 3-axis CHARMILLES Roboform 2000 was manufactured in 1995. It features a maximum workpiece dimension of 880 × 550 × 225 mm and operates with a maximum machining current of 64 A. With only 1,497 operating hours, this machine has been used primarily for training purposes. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES Roboform 2000 CNC Die-Sinking EDM machine we have for sale. Contact us for further details. • Operating Hours: Only 1,497 h (used as a training machine) • Measuring Resolution: 0.5 µm • Machine Weight: 3,450 kg • Max. Workpiece Dimensions (L × W × H): 880 × 550 × 225 mm • Max. Machining Current: 64 A • Phases: 3 • Frequency: 50 Hz • Voltage: 380/400 V • Current: 16 A Bodpfx Acjzvplfsnjdg • Power: 5 kVA • CE Marking: Yes • With accesories as shown in the pictures

Condition: used, TECHNICAL DETAILS - Travels on X/Y/Z axes : 400 x 300 x 350 [mm] - Rapid traverses rates (X/Y/Z) : 6 / 6 / 15 [m/min] - Min./max. distance between table and chuck : 170 / 520 [mm] - Max. part dimensions : 820 x 580 x 250 [mm] - Max. part weight : 800 [kg] - Max. electrode weight : 50 [kg] - C axis : 0 - 100 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 9.1 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 4.700 x 2.750 [mm] Bdodpfxowl Rh Nj Acneg - Machine height : 2.680 [mm] - Machine weight : 3.830 [kg] - Number of working hours : 13659 [h] EQUIPMENT - CNC : AGIEVISION 5 - Workpiece loading / unloading robot - Spindle nose : EROWA - Dielectric capacity : 600 [l]