CHARMILLES

CHARMILLES

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, AGIE CHARMILLES CUT 20 Ledpfx Aoz Rz D Isb Aoru CNC wire erosion machine Manufacturer: GF AgieCharmilles Model: CUT 20 Year of manufacture: 2008 Control: AgieCharmilles CNC control Machine type: CNC wire erosion machine Travel ranges: X-axis: 350 mm Y-axis: 250 mm Z-axis: 250 mm U/V axes: ±45 mm Working area: Max. workpiece dimensions: 900 × 680 × 250 mm Max. workpiece weight: 400 kg Max. taper angle: ±25° at a workpiece height of 80 mm Wire erosion system: Wire diameter: 0.15–0.30 mm Automatic wire threading Machining in a water bath Dielectric fluid: Deionized water Wire speed: approx. 30–330 mm/s Machine data: Connection voltage: 380 V / 50 Hz Machine weight: approx. 3,000 kg Machine dimensions: approx. 3,000 × 2,100 × 2,300 mm (L × W × H) Equipment: - CNC control AgieCharmilles - Automatic wire threading - U/V axes for taper machining - Dielectric fluid and filter system - Wire collection container - Handheld control unit According to the previous owner, the electronics have been extensively refurbished, with work carried out by Charmilles technicians.

Year of construction: 2002, condition: used, X-axis: 550mm, Y-axis: 350mm, Z-axis: 400mm, U-axis: 550mm, V-axis: 350mm, connected load: 12kVA, length: 2810mm, width: 2600mm, height: 2080mm, weight: 2.85t, operating hours: 28,608h, with documentation, an on-site inspection is possible. Lrjdpfoz Sr Nqsx Ab Aeu

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, GF AgieCharmilles Vertex 3F, Year of manufacture: 2007 Ledpfez I Ri Tjx Ab Ajru Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.03 – 0.33 mm (including fine wire module) Water bath machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Including AGIEJOGGER hand box for convenient setup Including AGIESETUP 3D AGIEVISION 5 control AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine has already been cleaned, overhauled, and thoroughly tested by us. You will receive a 6-month warranty on this! You are welcome to inspect and test the machine in our workshop while it is powered on. Includes user training at Techma on your overhauled machine. Optionally, we would be happy to offer you the following additional services: - Transport - Commissioning - Training - Cooler

Condition: used, Year of construction: 2003, operating hours: 81,060 h, functionality: fully functional, machine/vehicle number: 921083, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 2,020 mm, total width: 2,050 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, table height: 1,000 mm, empty load weight: 2,450 kg, table load: 750 kg, input voltage: 400 V, tank capacity: 760 l, distance table to quill: 220 mm, input frequency: 50 Hz, input current: 18 A, Equipment: documentation/manual, The table has a hard chrome finish. In addition, we also sell the matching EasyChange XT 4-position workpiece changer from Erowa; see the nameplate for the model. Pick-up only. Lrjdpfx Abjz Spd Ie Aou

Condition: reconditioned (used), Year of construction: 2006, operating hours: 19,500 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 205 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, overall weight: 2,450 kg, Charmilles FI240SL, year 2006. The machine can be inspected at our premises in Semsales during April. The machine will be fully cleaned and serviced. Viewing available on request. Lrjdjylkr Topfx Ab Aju

Condition: good (used), Year of construction: 2016, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: - 396.900.171.0076, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total length: 1,030 mm, The machine is in excellent condition and can be inspected under power. Lsdpfxeyit Ulj Ab Asru

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Ledpjtylpisfx Ab Ajru

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Lrjdpotylpcsfx Ab Aou

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Heidenhain iTNC 530 control unit, Working area X 600 x Y 450 x Z 450 mm Spindle mount CAT40, 24-position automatic tool changer, 20,000 rpm spindle Machine weight 6,100 kg, Ljdpfx Abez Hm Dke Asru Connection 16 kW Fuse rating 32 A Operating voltage 400 V, 50/60 Hz

Condition: used, Year of construction: 1983, functionality: fully functional, machine/vehicle number: 54452, Wire erosion machine Charmilles P25 Year of manufacture: 1983 Lrjdsz Nhwrspfx Ab Asu