Used Chamber Furnace for sale (2,767)

Condition: used, Temperature: 950°C Useable Dimensions (L x W x H): 5.000 x 2.600 x 1.100 mm Itjdpfxexnzcgo Afisn

Condition: good (used), Chamber filter press Netzsch. 32 plates 47x47 cm. Condition: excellent. Dimensions: 320x140x120 cm. Weight approx. 1.8 tons. Itodpjxnx D Ujfx Afisn

Condition: excellent (used), Chamber in very good condition Binder climate chambers are used to test material behavior under constant humidity and temperature conditions. These devices operate within a temperature range from 0°C to 70°C and a humidity range from 10% to 80% relative humidity. The distinguishing feature of the Binder KBF series is absolutely reliable stability testing and precise maintenance of constant climate conditions. Accurate climatic control makes these chambers ideal for stability testing. The climate chamber is based on a modular design, and the interior is lined with stainless steel for easy cleaning. Thanks to the APT.line™ preheating technology, the circulation of air throughout the usable volume is smooth and even. Humidity levels can be precisely regulated and fully adapted to specific requirements. Key features: - Temperature range: 0°C to 70°C - Humidity range: 10% to 80% relative humidity Ijdpfx Ajxnw Eqsfiotn - APT.line™ preheating chamber technology - Humidity control with a capacitive humidity sensor and steam humidification - Airtight inner doors made of safety glass (ESG) - Corrosion prevention on the glass with special TIMELESS coating - Interior chamber made entirely of stainless steel - 2 stainless steel wire shelves - 30 mm access port with silicone plug, left side - 4 robust castors, two with brakes, from 240 L capacity upwards

Condition: used, Liebisch KEA 300 Constanzo Functional condensate water test device for material and coating testing Description: This device is designed for performing condensate water or water vapor tests in accordance with common standards (e.g., DIN EN ISO 6270). It is ideal for testing the moisture and corrosion resistance of coatings, paints, metals, and plastics. The design is robust, low-maintenance, and perfectly suited for research, laboratory, and quality control applications. Technical specifications: Manufacturer: LIEBISCH Model: KEA 300 Constanzo Nominal power: 1,400 W Chamber dimensions: approx. 500 × 450 × 500 mm (W × H × D) Voltage: 230 V / 50 Hz Chamber material: Stainless steel, corrosion-resistant Controls: None / manual operation Important notice: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See image) Iedpjxlzm Tefx Afijtn (Subject to changes and errors in technical data; specifications may be updated!) If you have any further questions, feel free to contact us by phone.

Condition: used, mileage: 210,000 km, Year of construction: 2011, Serial number: YV2J1E1C5BA71xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21177 Specifications: EU approved until: 08.10.2025 Mileage: approx. 210,000 km Engine: 370 hp, Euro 5T Transmission: Fully automatic Suspension: Air – air Tires: In good condition Superstructure: 2011 Zoeller/SKK Ekopres P1453 Medium XL Autolift Roof bar with warning lights Indicators front and rear Exhaust outlet above cab Camera LED work lights Autoline sand spreaders 3 seats Air conditioning Description:1-chamber refuse compactor truck with pusher axle.Equipped with Autolift and sand spreaders.Handles waste bins up to 660 liters.Low mileage and good tires.Ready for delivery. Km: 210000 HK: 378 Technical approved: no EU-approved until: 08.10.2025 Own weight: 16000 Total Weight: 27000 Itodow Sc N Dopfx Afisn Payload: 10925 Width: 255 Length: 912 Euro: 5 Model: FM370 6x2 1-kammer komprimatorbil med Zoeller påbygg Gearbox: Automatic

Condition: ready for operation (used), functionality: fully functional, Gas inlet: AR Alternatre Gas inlet. Good working condition. Itedpfxjxnpw Eo Afion Please check out our other listings as well.

Condition: good (used), Manufacturer: LIEBISCH Type: 42016001 Itsdpfx Afjpbv Dpoijn Test chamber : 1000 liters

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, year of last overhaul: 2025, Intermediate proofer KEMPER BIP 72 - 6 rows (188/216) The BIP 72 intermediate proofer is specially designed for automatic dough fermentation between rounding and moulding. Technical data: - Net capacity 188, gross 216 pockets – 36 cradles with 6 pockets each (per cradle); Itodexnka Uopfx Afion - Output – infeed via synchronized conveyor belt

Condition: good (used), Basket LxWxD 300 x 210 x 460 mm 150-500 Degrees MARCELS MASCHINEN AG Itodpfx Afshz D Iwoijn

Condition: like new (used), Binder KBW 720 (2024) – Phytotron Chamber, Perfect Condition, Showroom Machine Model: Binder KBW 720 Year of manufacture: 2024 Condition: Like new – used exclusively as a demonstration unit after manufacturer testing Capacity: 720 liters Type: plant growth/climate/stability simulation chamber (phytotron) Power supply: 230 V Warranty: Yes (start-up) VAT Invoice: Yes Availability: Immediate Location: Grabina 92-701, Poland ——— Description: For sale: Binder KBW 720 climate chamber – a premium-class device for stability testing, plant growth simulation, and pharmaceutical & climatic research. The KBW 720 model combines a large working chamber (720 liters) with precise temperature and lighting control, making it an ideal choice for research institutes, laboratories, the pharmaceutical industry, and the agri-food sector. The unit was used solely as a demonstration exhibit – factory condition, ready for operation. ——— Technical data: • Temperature range: from +5°C to +70°C • Chamber capacity: 720 liters • Fluorescent lighting up to 15,000 Lux (programmable) • e™ – uniform temperature and light distribution • Stainless steel interior – easy to clean and disinfect • Programmable controller with LCD screen • Integrated data logger, USB port • Quiet operation, energy-saving technology ——— Applications: • Climatic testing under controlled lighting conditions • Phytotron-based research on plants and seeds • Stability tests in accordance with ICH guidelines • Use in pharmaceuticals, biotechnology, veterinary medicine ——— Why choose this unit? • Condition like new – no signs of use • Available immediately – no factory lead time • Perfect alternative to new equipment – at a lower price • Option for online demonstration or on-site visit • Technical support and optional extended service (delivery possible) Iedjw Nvbzjpfx Afistn

Condition: excellent (used), Year of construction: 2008, 169 USED Koma refrigerated proofers. Year of manufacture: 2008. EXTERNAL DIMENSIONS (in cm): Isdpfoxmiz Ujx Afietn - Width 160, - Depth 380, - Height 335. INTERNAL DIMENSIONS (in cm): - Width 150, - Depth 340. NOTE: Price is for one unit. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: used, El. heated chamber oven Nabertherm Type: N 500 / 45 HA Air flow: horizontal Itedpfx Aoxmhhasfijn Temperature: max. 450°C Connected load: 28 kW Clear dimensions (W x D x H): approx.790 x 1000 x 760 mm

Condition: excellent (used), Type: WKL 100/40 Climate Test Chamber, Air-Cooled with Humidity Control, -40 to +180°C Specifications for Temperature Testing: Temperature Range: -40 to +180°C Temperature stability at steady state: Temporal fluctuation in center of workspace: ±0.3 to ±1 K Spatial deviation: ±0.5 to ±2 K Rate of temperature change: Heating: 3.5 K/min Itedpfsxhf Erox Afijn Cooling: 5 K/min Heat compensation capacity: max. 1100 W Specifications for Climatic Testing: Humidification System Data Reservoir capacity: approx. 13 l Water quality: Demineralized pH value: 6 – 7 Conductivity: max. 20 μS/cm Water consumption at constant temperature +40°C, 92% r.H.: 2 l / 24 h Temperature range: +10 to +95°C Humidity range: 10 to 98% r.H. Temperature and humidity variation (steady state): Temporal temperature fluctuation in center of workspace: ±0.3 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temporal humidity fluctuation in center of workspace: ±1 to ±3% r.H. Mechanical Load Data: Maximum load on chamber floor: 25 kg Per shelf: 10 kg Total shelf load: 50 kg Access port: 50 mm diameter Interfaces: Ethernet interface (RJ45), USB interface Operational Data: Chamber lighting: Halogen bulb 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 3.0 kW Rated current: 13.0 A Required fuse: 16A slow blow Protection class: Control cabinet IP 22 and operator panel IP 54 Heat Emission for Air-cooled Test Chambers: Max. heat emission to ambient: 2000 W Noise Measurement: Sound pressure level (free field), measured at 1 m in front and 1.6 m high: approx. 56 dB(A) Chamber Volume: approx. 100 liters Weight: 190 kg Refrigerant: R404A Important Safety Information for Buyers: The following procedures are performed in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Changes and errors in technical data and specifications reserved!) For further questions, we are happy to assist you by phone.

Condition: used, max. temperature 1150 Grad voltage 380 Volt total power requirement 5.0 kW Dimensions - Inside - B x H x T 220 x 220 x 350 mm weight 50.0 kg from a vocational school (!!) Heraeus is one of the leading manufacturers of furnaces for heat treatment in Laboratories, craft and industry. Solidly constructed, high-quality components. Especially for material testing or heat treatment of welded or additively constructed construction parts, tempering, annealing etc. Iodpfx Afoxg R Iveiotn Furnishing: - HERAEUS hardening / chamber / annealing furnace - for heat treatment of metal - Infinitely adjustable temperature - for workshop use - front - hinged door - front degree indicator - timer

Condition: good (used), Internal dimensions 250 x 400 x 160 mm Temperature 1150° MARCELS MASCHINEN AG Itedpfovhazfox Afijn

Year of construction: 2003, condition: excellent (used), For sale Nabertherm N650/G furnace Furnace in very good condition with shelves and frame. Technical data: Capacity 650 L Power: 26 KW Voltage: 400 V Current intensity: 37.5 A Max temp: 900 degrees Celsius Chamber dimensions width 70 cm depth 85 cm height 110 cm External dimensions width 112.5 cm Iodpfx Afjvrg Sljijtn depth 155 cm height 192 cm Nabertherm C40 controller

Condition: excellent (used), Year of construction: 2007, 162 USED Koma refrigerated proofers. Year of manufacture: 2007. EXTERNAL DIMENSIONS (in cm): - Width 160, - Depth 380, - Height 335. INTERNAL DIMENSIONS (in cm): - Width 150, - Depth 340. NOTE: Price is for one unit. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. Itodpfx Afexl Rh Heion We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: good (used), BALZERS LTE 020 – Thermally Controlled Sample Preparation Station ✔ Use in: Coating technology, semiconductor processing, surface analysis, electron microscopy • Digital display unit with 4 channels (B1–B4) • Temperature display in °C • Adjustable via SET / UP / DOWN • Separate controls for mains and lamp • Power supply: 220V Itodexl A Edspfx Afien Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more items – new and used – in our shop! International shipping costs upon request!

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 3945, Retort Type Mesh Belt Furnace Typ: BLH with protective gas atmosphere Heat treatment line with protective atmosphere KOHNLE BLH-950-250/50-1800 Year of production: 2003 Serial number 3945 Hardening in a protective atmosphere, cooling in oil, washing and degreasing and tempering Ijdpfsw Tcruox Afietn It consists of - Vibrator for charging - 300 kg capacity - Magnetic conveyor for filling the furnace - Tempering furnace - max working temperature 950 C 3 temperature control zones strip width 250 mm Capacity 30-50 kg/h Tunnel length 1800 mm Protective atmosphere Propane (possible change of gas for a protective atmosphere) - Oil quench with cooling oil, temperature 70C - Magnetic conveyor for extracting goods - Stand for washing and degreasing - vibrator for charging Annealing furnace - max temperature 500 C Control cabinet SIEMENS ALL ORIGINAL TECHNICAL DOCUMENTATION FROM THE MACHINE Installation dimensions 17 m x 2 m x 2.5 m The furnace can also be modified for nitrocarburizing. Dismantling and loading costs are charged additionally The price of the mentioned line is not fixed for serious enquiries

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Wiesheu furnace for sale. 8+4 tray design, with 2 loading trolleys, own extractor hood. Continuously serviced by brand service. Isdpouxfmlsfx Afietn

Condition: good (used), Internal dimensions diametre x depth 430 x 630 mm Temperature 800° MARCELS MASCHINEN AG Iodpsw Nnqujfx Afistn

Condition: good (used), Type: VCS 7034-5 Climatic Test Chamber, Water-cooled Vötsch VCS 7034-5 Test chamber volume: 335 litres Performance for temperature testing: Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Performance for climate testing: Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50 % RH and +95°C / 50 % RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 10 kW Nominal current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R-404A / R-23 For your safety as a buyer, please note the following information! The following steps are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors reserved!) Itjdpfx Aexgd Rdofijn Feel free to contact us by phone for any further questions.

Condition: used, Vertical furnace, make Borel Itodpoxltd Rjfx Afisn Possible processes: tempering, nitriding Dimensions: diameter 800 mm height 1.800 mm max. Temperature 600ᵒC Connected load 50 kW Without lid and electrical cabinet.

Condition: used, El. heated chamber oven, make Heraeus Iedpfx Ajxlr Nlsfijtn Type: T 340 Temperature: 250°C Clear dimensions (W x D x H): 300 x 280 x 270 mm

Condition: used, El. heated chamber oven, make Heraeus Itedpfjxlruzex Afijn Type: BT 5042 Temperature: 250°C Clear dimensions (W x D x H): 390 x 285 x 350 mm