Used Chamber Furnace for sale (2,716)

Condition: good (used), Year of construction: 2005, Pusher Furnace System (PUS1), Manufacturer: Ipsen International GmbH, Type: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of manufacture: 2005, Fuel: Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Two-Chamber Pre-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Preheating Furnace, Type: DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas heated, 80-100 mbar, 350-500°C Pusher Gas Carburizing Furnace (Double Line), Type: PP-2 65x65x65-18-G, natural gas heated, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950°C, 140 pieces per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Type: QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, air cooling, 6 m³ tank volume, 120°C max., 60-80°C working temperature Two-Chamber Post-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Tempering Furnace, Type: DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, 300°C max. furnace temperature, 150-240°C working temperature Batch Transport System, Measuring, Control, and Switch Cabinet with Conti-Control System, Type: CO/CO2-2 Ljdpfxoyabxys Ad Nsrg Batch Data: Case hardening for transmission parts 650 mm x 650 mm x 650 mm, max. 280 kg, batch transport height 800/2,200 mm

Condition: ready for operation (used), machine/vehicle number: WDB9560331V236396, mileage: 232,957 km, first registration: 05/2014, fuel type: diesel, empty load weight: 16,800 kg, maximum load weight: 9,200 kg, overall weight: 26,000 kg, tire size: 315/70r22,5, axle configuration: 6x2, wheelbase: 3,860 mm, axle spacing: 2,500 mm, fuel: diesel, color: blue, number of gears: 6, emission class: euro6, suspension: air, number of seats: 3, total length: 1,000 mm, total width: 2,500 mm, total height: 3,350 mm, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, onboard computer, tachograph, Dear Sir or Madam, The subject of this listing is a Mercedes Benz Econic refuse collection truck equipped with a specialized dual-chamber NTM body. Net price: 153,000 PLN First registration: 23.05.2014 Mileage: 232,957 km Power: 300 HP Engine capacity: 7,698 cm3 Lrsdpfx Aex U Acwed Neg Emissions standard: EURO VI VIN: WDB9560331v236396 Fuel type: Diesel Number of axles: 3 Drive: 6x2 Transmission: Automatic Number of gears: 6 Suspension: Air Gross vehicle weight (GVW): 26,000 kg Curb weight: 16,800 kg Payload: 9,200 kg Length: 10 m Height: 3.35 m Width: 2.5 m Tyre size: 315/70R 22.5 Axle spacing: I-II 3.86 m, II-III 1.30 m Body: NTM Capacity: 12.6 + 6.4 m3 Year: 2014 Equipment: - ABS - Electric windows - Electric mirrors - Pneumatic seats - Hydraulic power steering - Engine brake - Hydraulics - Immobilizer - Intarder - On-board computer - Manual air conditioning - Reversing camera - Fog lamps - Roof hatch - Speed limiter - Lift axle - Factory radio - Adjustable suspension - Tachograph - Cruise control - Multifunction steering wheel We provide: - Vehicle servicing after purchase - Maintenance repairs for equipment purchased from us - Transport to any location worldwide At your request, we can perform: - Replacement of filters and oils in the vehicle - Replacement of filters and oils in the body Additional service: As a market leader in Central Europe specializing in the sale of municipal vehicles and equipment, we would like to offer the benefit of our extensive experience in this area and handle the sale of your surplus municipal equipment on your behalf. We will take care of the following for you: - Multilingual customer communication - Preparation of sales and post-sales documentation - Organization of road and sea transport - Arrangement of customs documentation (customs clearance, Eur 1, T1) - Preparation of the vehicle for sale Leasing available for older vehicles, up to 18 years old. If you would like more details, please contact us.

Condition: excellent (used), Year of construction: 2008, For sale is a salt spray chamber designed for straightforward testing of the corrosion resistance of metal parts and coated surfaces. Within the enclosed chamber, components are exposed to a fine salt mist to reveal corrosion under realistic conditions. The system is clearly arranged and suitable even for users without specialized knowledge. The salt spray chamber is fully functional (still in operation) and in well-maintained condition. Key specifications can be found in the attached images. Lodpfx Adsx Uz Hhs Njrg

Year of construction: 1988, condition: used, Empty weight: 400 kg Dimensions (LxBxH): 120 x 80 x 170 cm Up to 1100 *C Dimensions workplace: 250x140x350mm With 2 cooling-units - Year: 1988 - Documentation available: No - CE certificate present: No - Serial number: 71943 Lodpfjx Sdk Rox Ad Nsrg - Motor power: 5.0kW - Transport dimensions: 1200mm x 800mm x 1700mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2014, condition: excellent (used), Refrigerating chamber for EUR 6 PAL. Ljdpfx Adotu I A Rj Njrg Dimensions 5.9m x 1.6m x 2.34m, the rest on the attached diagram. Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. Payment in cash, possible upon delivery on site. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Please contact us before purchasing. We issue intra-community invoices - excluding VAT. opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ Lredpfx Aefz I Rxsd Njg 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Ledofx Nfmopfx Ad Njrg Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Lsdpfjfzccnjx Ad Nsrg Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ Lodpfsfzb Rcjx Ad Nsrg 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: ready for operation (used), nominal temperature: 650 °C nominal voltage: 380 V nominal current: 19 A rated power: 12 kW connected load: 12.6 kVA Lredpjx Tziasfx Ad Nsg

Condition: good (used), Year of construction: 1988, Reaction vessel, batch system, solids separator, washing trough, painter's wash station, water treatment, tool and water cleaning, filter press, chamber filter press -Manufacturer: Poligrat, chamber filter press type 470-20/2 -Model: 11 plates -Hydraulic cylinder: Stroke: 115 mm -Dimensions: 1315/920/H1720 mm Lrjdpfohvfznsx Ad Nsg -Weight: 580 kg

Condition: used, functionality: fully functional, machine/vehicle number: WDB9560331V249982, mileage: 93,938 km, first registration: 01/2018, fuel type: diesel, overall weight: 27,000 kg, axle configuration: 6x2, wheelbase: 3,900 mm, fuel: diesel, color: white, emission class: euro6, suspension: air, Year of construction: 2017, operating hours: 11,558 h, Equipment: ABS, air conditioning, central locking, cruise control, The subject of this listing is a Mercedes-Benz Econic refuse collection truck with a specialist dual-chamber VDK body. Net price: 159,000 PLN EURO 6 First registration date: 2018-01-16 Mileage: 93,938 km Operating hours: 11,558 h Engine power: 220 kW Engine displacement: 7,698 cm³ Diesel 6x2 drive Wheelbase: 390 cm and 135 cm Transmission: Allison 6-speed automatic Full air suspension Ljdpoxz Eb Hsfx Ad Njrg Body: VDK Segregation Capacity: 12.6 + 6.2 m³ GVW: 27,000 kg Curb weight: 17,290 kg Tyre size: 315/70/22.5 Equipment: - ABS - Lane departure assistant - Differential lock - Central locking - Central lubrication - Electric windows - Electric mirrors - Electric doors - Adjustable driver's seat - Power steering - Engine brake - Hydraulics - Immobiliser - Manual air conditioning - On-board computer - Twin rear wheels - Reversing camera - Interior sunblind - Speed limiter - Radio - Adjustable suspension - Toolbox - Reversing signal - Cruise control - Tachograph - Multifunction steering wheel - Strobe lights - LED lighting We provide: - Vehicle servicing after purchase - Maintenance and wear repairs for equipment purchased from us - Worldwide transport Upon your request, we can perform: - Oil and filter change for the vehicle - Oil and filter change for the body Additional service: As the leading specialist in the sale of municipal vehicles and equipment in Central Europe, we would like to offer you our extensive experience in this field and mediate the sale of redundant municipal equipment on your behalf. We will handle for you: - Client communication in several foreign languages - Preparation of sales and after-sales documentation - Organisation of road and sea transport - Organisation of customs documentation (customs clearance, EUR 1, T1) - Preparation of the vehicle for sale Leasing options available for older vehicles, up to 18 years old. If you would like more details, please contact us.

Year of construction: 2000, condition: good (used), Temptec annealing furnace: Max workpiece size: Ledex Tcmyjpfx Ad Nerg approx. 1200 × 1200 × 1200 mm Loaded for transport.

Condition: used, Year of construction: 2011, Technical details: Lsdpfx Adju Nw E Uj Njrg temperature min.: 1 ° temperature max.: 199 ° electrics - voltage/frequency: 380 / 50 V/Hz heating capacity: 1,8 (1800 Watt) kW protection class: IP 54 total power requirement: 16,2 kW weight of the machine ca.: 0,93 t dimensions L x W x H: 2,85 x 2,0 x 1,4 m Pre-polymerization tunnel - Heat treatment tunnel Application: drying for washing and painting lines - pass through Sold as is and described! other features: -recommended temperature according to manufacturer max. 80°C; safety setting 90°C; heating 230V -with chain conveyor/feed line made of Teflon -chain width 200mm -max. workpiece width 150mm passage W: 150 x H: 110mm, running height 600mm; operation motor SEW Eurodrive (gear motor) power 0,18kW loading W x H: 500 x 800mm unloading door W x H: 600 x 1200mm access door W x H: 800 x 980mm with safety locking system room height 1400mm *

Year of construction: 2012, condition: used, Technical details: max. temperature: 700° - übliche Temperatur: 400 - 650°C Grad size of opening: B: ca. 2200 x T: ca. 3800 x H: ca.1100 mm program control: Siemens S7/300 IM 151-7 interface: Ethernet container volume: Ofen-Volumen: 9,2 m³ l control voltage: 24 / 230 Volt current type: 1P/PEN; 50 Hz Voltage: 400 V elect. connected power requirement of heater: 3 x 3 x 21 kW = 189 kW flow rate: 3 x ca. 9.000 = 27.000 m³/h weight of the machine ca.: 8,0 t dimensions of the machine approx. HxWxD: ca. 3.9 x 3.8x 4.8 m dimensions electric cabinet: ca. B: 2.400 x T: 400 x H: 2.000 mm transport dimensions LxWxH: ca. 5,2 x 3,6 x 2,9 m Electrically heated circulation oven Lodou R Dhxepfx Ad Norg Electric annealing furnace whose housing is made of profiled sheet steel and lined with lightweight refractory bricks/ firebricks. Application/processes: mainly annealing of low-alloy and high-alloy wood cylinders (e.g. alloyed gray cast iron) Usual operating weight 5000kg max. 8000kg The parts are placed directly crosswise on the bogie hearth/grate in the flow device. (Height above floor approx. 750mm without grate) Heating integrated in oven ceiling Circulation fan (3 compact fans) on oven side wall, 3 x 4.0 kW = 12.0 kW Forced cooling (1 cooling air fan) Program control via 25 programs with 50 program sections per program Oven door/lifting door with SWE gear motor approx. 2.2 kW (frequency-controlled) Bogie hearth drive approx. 3.0 kW SEW geared motor (frequency-controlled) incl. center rail (chain drag) used, good condition *

Year of construction: 2002, condition: excellent (used), Severn Science Argon Vacuum Welding chamber, new in 2002, previously used in F1 motor racing facility. With Edwards E2M 80 vacuum pump. Excellent condition, very rarely used. Lodpfx Asrwnrgjd Njrg

Condition: like new (used), Chamber filter press from Netzsch. 20 plates 40x40 cm. Condition: excellent. Lsdexn Azdspfx Ad Nsrg

Condition: used, Year of construction: 2017, Name: Used chamber filter press Ljdpfx Aex Swp Hsd Nerg Manufacturer: JKF Kübler Type: KFP 800-40-25K-OA-AU/LG-2 Year built: 2017 Construction form: Side beam press Press content: 470 Liters Cycle: Open Filter area: 41,7 m2 Plate size: 800 x 800 mm Number plates: 41 Plate material: Polypropylene Plate transport: Automatically Cake thickness: 25 mm Closing pressure: 360 bar Dimensions: L 4303 x W 1700 x H 2110 mm Empty weight: 4830 kg Technical doc.: Yes Message: It was used in electroplating. Accessories: A switch cabinet, a control cabinet, a hydraulic system, piston pump, a drip tray. Condition: Second hand Price: By request

Condition: used, Year of construction: 2001, MAPPI AU 1F 1S 900 1800 O.4 R.S.A. – Year 2001 Tempering furnace Maximum glass dimensions: 900 x 2000 mm Thickness: 4-19 mm Lsdpfx Adjx N Sp Ao Nsrg

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, Industrial gas billet heating chain furnace for forging HEATING FURNACE WITH N°04 GUIDES – diam. Max 45 mm Complete with: Automatic load billet conveyor Electronic temperature control Lrjdpfx Ajx R Thved Neg The CP Forni Heating Chain Furnace SM45 1400 4G 1Z is an industrial gas-fired chain furnace designed for the continuous reheating of billets, primarily for hot forging applications, such as brass or steel. The model designation likely indicates specific configurations, such as max temperature and number of guides. Key Features and Specifications Application: Reheating metal billets (e.g., brass, steel) for the hot forging process. Design: A continuous chain furnace, which allows for a consistent production flow, integrating easily into automated production lines. Heating Method: Industrial gas fired, with high energy efficiency and modern models incorporating heat recovery systems to reduce consumption. Temperature: Specific max temperature CP Forni chain furnaces for steel operate up to 950°C Control System: Equipped with a digital control panel, often a touchscreen, allowing precise management of all operating parameters, including temperature and transport speed.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, total width: 20,000 mm, total height: 10,000 mm, total length: 14,000 mm, inner dimension width: 6,000 mm, inner dimension length: 8,000 mm, inner dimension height: 3,200 mm, Equipment: cabin, compressor, documentation/manual, lighting, Robotic shot blasting chamber Blastman B20CX, equipped with a full abrasive recovery system, filtration, pressure vessels, and control system. The cleaning robot is in virtually new condition (last upgrade in 2024). The system is designed for both automatic and manual shot blasting of steel structures, castings, large-scale components, and parts requiring high repeatability and cleaning efficiency. Key technical information: • Robot model: Blastman B20CX • Year of last upgrade / year of chamber manufacture: 2024 / 1998 • Working chamber dimensions: 8 × 6 × 3.2 m • Robot arm reach: 2750 mm (telescopic) • Operating modes: automatic / manual • Media: steel shot, electrocorundum • Performance: up to 200 m²/h • Robot technical condition: as new, minimal signs of wear (last upgrade in 2024) Scope of supply – complete system: • Blastman B20CX shot blasting robot • Chamber lined with wear-resistant material • Abrasive screw conveyors and distribution systems • Pressure vessels • Pneumatic and hydraulic installation Lodpex Rzlcefx Ad Norg • Filtration system • Operator's cabin • Lighting and complete control system Full technical documentation, additional photos, and a demonstration video of the machine can be provided upon request. The machine is available for immediate inspection. If interested, we are happy to arrange a visit.

Condition: new, functionality: fully functional, New device!! Special offer!!! New price: €160,000 Firing and thawing chamber for the pharmaceutical industry. Application Pharmaceutical and Bioprocessing. The Farrar Scientific Controlled Rate Chamber permits fast freeze/thaw from +40C to -80C, uniform bulk freezing and/or thawing of Phase-Change Material (PCM) or products contained in a variety of containers (bags, bottles or any size containers) such as single use system (SUS), polycarbonate vessels or polypropylene vessels. Temperature Range Programmable +40 ̊C to –80 ̊C Gbs7obps Chamber Volume 659.8 L (23.3 Cu. Ft.) Interior Dimensions (W x D x H) 34” x 27.5” x 43” 863.6 x 698.5 x 1092.2mm Exterior Dimensions (W x D x H) 75” x 38” x 80” 1901.5 x 960.4 x 2028.8mm Pull Down Empty Chamber < 38 minutes from +25 ̊C to –80 ̊C Door Open Recovery at –80 ̊C < 10 minutes 100L Load +25 ̊C to –80 ̊C < 12 Hours Unit comes with the complete documentation. Also the factory report. The unit is unused and in its original packaging. Shipping worldwide in a wooden box. Lrodpfxev Rnl De Ad Nog (#7709) No further warranty or guarantee.

Condition: excellent (used), Year of construction: 2001, Vacuum tempering furnace Manufacturer: BMI year of construction 2001 Lodpovcyf Tefx Ad Nsrg Maximum temperature: 750°C Year of construction: 2001 Batch size: L X W X 1200 X 600 X 600mm Heating: Electric Heating capacity 100 KW

Condition: new, Year of construction: 2025, Extraction ground, Waffle floor mineral abrasive about 7000x4200mm without grid East surface with suction and collecting boxes Lrjdpsdz Ayvefx Ad Njg For questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: used, This listing is for a EuroClone Optichrome evaporation chamber, Optichrome® is a controlled evaporation chamber with automatic control of temperature and humidity for optimized chromosome preparations Lrsdpfx Adsxzh Ivs Nog