Used Cereal Bar Line for sale (22,425)

Condition: excellent (used), This line was bought to produce protein bars for a sports nutrition business (under 900 hours). The machinery is in immaculate condition having only been used occasionally for their own production. PLEASE NOTE THAT THE VEMAG HP25E HAS BEEN REPLACED BY A NEWER HP20E FROM A DIFFERENT FACTORY. Hodpfx Aheunm S Hegjt

Year of construction: 2018, condition: excellent (used), functionality: fully functional, TYPE 318:: COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers following main advantages: - optimal rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Hsdpewbqx Hefx Ahget Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height : 3270 mm TYPE 284:: DRUM DRIER/ROASTER 1600 PTFE Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE-layer. This secures processing of extremely sticky coated extrudates. Unlike the conventional hot air drying process, this drying system works with a very high degree of efficiency. The whole machine is made of rust free stainless steel. The radiation elements are attached to a common carrying arm in the drum. The roasting drum runs on special, low-noise carrier rollers and corresponds to the safety regulations and is equipped with a corrosion free covering to reduce energy losses. The rpm of the drum is adjustable continuously. The drive is carried out by a three-phase motor 1.5 kW. Drum diameter: 1600 mm Electrical heating power: 126 kW Drum length:4300 mm Drum height : 2960 mm TYPE 361:: COOLING DRUM 1600 For cooling of sticky and hot extruded products under rotation for separation. The cooling is carried out with the help of room air, which is blown controllably into the drum by a middle pressure blower 1.85 kW AC. Please note: depending on the product characteristics, additional cooling might be necessary for breakfastcereals before the product can be packed. Drum diameter :1600 mm Drum length: 4000 mm Drum height : 2890 mm

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Hedpfx Aoywztgehgjt Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Standard configuration PRESS :original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Full line ready to produce including : *New AMIDEC (France) 2 axis transfer arm, equipped with: 2 grippers for the handling of billets1 nozzle for cleaning and lubrication of forging tools *New Induction s.r.l. (Italy) heater 200kW designed to heat carbon steel billets diameter 24 to 75,5mm, length 22,1 to 33,1mm. 700 to 800°CScope of supply of the heating systemA/ M.F. Static converter model IHFT 200 K4B/ Frame for the M.F. capacitors and inductorsC/ automatic loading system for disc-shaped billets with reversible box- Tilting box- Storage conveyor- Vibrating bowl- Command and control cabinet- Steel support - Soundproof cabineD/ 1 system for the introduction of the billets to the inductor and 1 system for exit of the billets.E/ Inclined inductor length 1200mm with inox pipe F/ 1 automatic inductors exchange double version (for 2 inductors)G/ 1 optical pyrometer H/ 1 integrated dry supply transformerI/ PLC Siemens S1500 installed on the converterJ/ Cooling system  Tools

Condition: ready for operation (used), Festo DGPL-32-900-PPV-A-KF-B linear actuator 161793 – 8 bar, used, in good condition, 100% functional, delivery scope as shown in the photos Hsdpfox Ermasx Ahgst

Year of construction: 2023, condition: ready for operation (used), functionality: fully functional, Korthfiber SN 1025 GFRP rebar production line in good working condition. Additional programmable heating for all 4 resin trays. Produces 4 bars from 4-12mm diameter. Larger diameters possible but 1-2 depening on size. Hjdsyk Ut Ejpfx Ahgot Comes with dedicated transformer and power cables. Various types of fibre and resin systems possible.

Condition: used, machine/vehicle number: LC534, Used Isobaric Filling Line for Sparkling Wine 3000 bph The isobaric filling line for sparkling and semi-sparkling wine produces 3000 bottles per hour and handles 1.5-liter bottles along with a wide range of formats. The line operates smoothly, and you can inspect it before its decommissioning at the end of April. Every machine in the line includes safety features, and some technical manuals remain available. The bottle formats include Collio, Atmosfera, Astro, Lia, Cuvee, Spumante Italia, Flute, Campana, Extral, Tappo Raso, Emiliana, Bordolese, Borgognotta, Bordolese Nobile, and Borgognotta Alta. Moreover, the seller will supply format change parts along with the line. Additionally, conveyors ensure seamless and continuous movement between machines, optimizing the production process. Description of Main Machines Depalletizer TMG VEGA 60 (2008) In this Used filling line for sparkling wine the depalletizer automatically removes bottles from pallets using its integrated PLC and electronic protection barriers. Furthermore, its system includes a layer pad magazine and an automatic mechanism for removing pads and caps within the same cycle, ensuring efficiency. Rinsing Machine AVE RAI 12 (1999) The rinsing machine cleans the inside of bottles using its PLC system. It effectively removes particles and potential contaminants. As a result, the bottles are properly prepared for filling, which contributes to higher product quality. Ozone Dispenser The ozone dispenser sanitizes bottles before filling by producing ozone gas, a strong oxidizing agent. Not only does the gas eliminate bacteria, yeast, and microorganisms, but it also leaves no chemical residues, thereby guaranteeing high hygiene standards. Isobaric Filling Machine Cobert SUPREMA (1985) The isobaric filling machine fills bottles using 24 filling valves while controlling internal pressure. Consequently, it processes both still and sparkling wines, preserving their stability and quality. Capping Machine AROL (1997) The single-head capping machine applies flush and mushroom corks. As a result, it ensures airtight sealing, which preserves the wine’s flavors and properties over time. Capping Machine KOMPASS (2007) The capping machine applies screw caps (BVS, Stelvin) to bottles with precision. Furthermore, its design accommodates multiple formats and guarantees secure closures for different types of wines. Wirehooder ROBINO & GALANDRINO REKORD 10/2 (1994) The wirehooder automatically applies wire cages using its 10 plates and long-duration magazine. Because the machine loads cages from ground level, it allows uninterrupted operations without delays. Bottle Heating Tunnel COMTEC (2017) The heating tunnel stabilizes the temperature of bottles after filling by spraying them with warm water. Consequently, it helps reduce thermal shock and prevents potential damage to the bottles. Drying Tunnel CAMES TNN1 (2001) The drying tunnel blows high-efficiency air over the bottles, thoroughly drying them before they move to the next production step. Thus, this step ensures that the bottles are ready for labeling and packaging. Capsule Distribution and Application Hodpfxjvxz Alo Ahgst Capsule Distributor NORTAN (1997) The distributor feeds capsules continuously to the capsuling machine, thereby minimizing dow...

Condition: used, machine/vehicle number: LC579, Used Isobaric Complete Bottling Line for Still and Sparkling Wine up to 4500 bph This complete bottling line has been designed and configured to provide a high-quality, consistent filling process for both still and sparkling wines. Built around an isobaric tribloc system, it integrates rinsing, filling, and capping functions in a continuous flow, ensuring excellent efficiency while maintaining product integrity. The line is currently set up for still wines at an output of 4,500 bottles per hour and for sparkling wines at 3,000 bottles per hour. It is already technically prepared for sparkling wine production and only requires the addition of a mushroom corker, a capsule applicator for spumante hoods, and a heating tunnel if needed. The system is equipped with dedicated conveyors, a centralized lubrication system, and separate control panels for conveyor management, enabling straightforward maintenance and integration into existing plant automation. The entire layout follows a linear configuration, optimised for space utilisation and ensuring smooth product transfer between each stage without unnecessary accumulation points. Bottling Process and Core Machinery At the start of the line, empty bottles are automatically fed into the system via a depalletizer. This equipment gently lifts and transfers the bottles onto the feeding table while maintaining their integrity. Bottles are then directed to the tribloc system, where three key operations are performed in sequence: rinsing, filling, and capping. Hodpfx Asw Imp Hjhgjt The isobaric filling technology ensures precise fill levels and consistent carbonation retention for sparkling wines, while also being perfectly suited for still wine bottling. The filling valves are designed to minimise oxygen pickup, which is crucial for preserving the wine’s sensory qualities and shelf life. The rinser operates with clean water or a sanitising solution, ensuring bottles are free from contaminants prior to filling. The capping turret, currently configured for still wine closures, applies either BVS screw caps or traditional corks, depending on the selected format. A dosing unit for gum arabic is integrated into the line. This system allows for precise addition of stabilising agents post-filling, which helps maintain wine clarity and prevent precipitation during storage. A dedicated steam generator (vapouriser) is included for both line sanitisation and, when required, pre-heating applications. Prior to filling, a microfiltration unit is positioned to ensure that the product entering the tribloc meets the desired microbiological standards. This step is essential for ensuring product stability and quality without the need for excessive chemical preservatives. Downstream, bottles are transferred to the labelling station. While the labelling unit is supplied by a third-party manufacturer, it is elect...

Condition: used, Year of construction: 2015, Overview This complete bottling line was manufactured in 2015 by KOSME and consists of a depalletizing system, rinser/filler/capper block, labeling machine, and full conveyance. The line is designed for high-quality beverage bottling using isobaric probe-valve filling technology and is suitable for products such as beer, carbonated beverages, kombucha, and specialty drinks. With a compact rotary layout and a capacity of up to 135 bottles per minute, the line offers an efficient and hygienic solution from depalletizing to labeling. The equipment becomes available as the line has been dismantled and prepared for shipment. The goods can be delivered to Port of Rotterdam (Incoterms 202) upon request. Technical Data  - Capacity: up to 135 bottles per minute (BPM) - Bottle formats: 12 oz (installed) with change parts for 22 oz / 24 oz - Filling product: beer, carbonated beverages, kombucha, functional drinks - Filling system: isobaric probe filling with electronic level control - Fill range: 12 oz – 24 oz containers - Labeling system: cold glue labeling - Bottle detection: integrated bottle burst detection system - Construction: all stainless steel, high-hygiene design - Cleaning: automatic CIP capability - Operation: touchscreen HMI with recipe and product management - Electrical supply: built for 460Y / 265 V | 3 phases | 60 Hz (US power supply) - Note: frequency / voltage converter required for non-US markets - Condition: machine basically in good condition, dismantled and ready to ship Scope of Delivery  - Depalletizer | KOSME / Semidepal | 2015 - Rinser / Filler / Crown Capper (Monoblock) | KOSME | Barifill | 2015 - Labeling Machine | KOSME | Flexa 600 (Cold Glue) | 2015 Hedeyigigjpfx Ahget - Bottle Conveyors | KOSME | – | Included | 2015 Additional Information - Manuals included - Basic tooling and format change parts for 12 oz and 22 oz included - Additional documentation available upon request - All conveyance lines included - Dismantling team available to supervise reinstallation and recommissioning - Utility specifications (air, CO₂ / gas) available upon request

Condition: new, NOISE BARRIER PRODUCTION LINE The noise barrier production line includes several machines, such as: Decoiler, Straightener Feeder, Main Roll Forming Machine (150 T, H-type), Punching Device, Cutting Machine, and Stacking Unit. Hodpfeziwvlex Ahgot IN ADDITION Custom-made hydraulic scissors (standard, non-length cut) – Servosteel Türkiye TS EN 1793-1 (absorption) certificate TS EN 1793-2 (insulation) certificate 3 aluminum molds for the A140 series (System Aluminum Türkiye) 3 aluminum molds for the A160 series (System Aluminum Türkiye) A140/A160 side cover EPDM wicking mold

Condition: new, Year of construction: 2023, Round tree debarker CAMBIO 45 AIR TEN.CAMBIO 35.VK-450.Debarker will be sold after overhaul.Debarker will be equipped with new generation knives. The machine can be sold as part of debarking lines. Which consists of 1. Table for unbarked logs 2. Hydraulic log splitter. 3. Feed conveyor. 4. Scraper bark conveyor. Hedpfxoiqi S Ne Ahgst 5. Outgoing conveyor with log dumper to the left side. 6. Pocket for debarked logs. All equipment is new

Condition: used, machine/vehicle number: LC595, Used complete isobaric glass line for wine - 2000BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling and combines proven European packaging machinery for efficient beverage production. It integrates a filling machine, wirehooder, pasteurizer, case sealer, and auxiliary equipment to support end-to-end industrial packaging operations. Ideal for second hand acquisition, the line offers reliable performance with CE-marked components and a balanced mix of capacities for medium-scale beverage production.Containers: Designed for Glass bottle handlingKey equipment and models: cobert SUPREMA filling machine; ROBINO & GALANDRINO VITTORIA 83 wirehooder; RIVI Engineering mesh pasteurizer 1P; SIAT SM11-S case sealer; OMAC lobe pump; FACCIO G. cork orienterComponent years: 1986 (wirehooder), 1993 (pasteurizer), 2007 (case sealer), 2008 (cork orienter)Pasteurizer capacity indicator: Mesh area 6.5 m²Electrical data (case sealer): 380/415V, 50Hz, 3PH, 1.08A, 260WCompliance: CE markings on componentsAdvanced Automation & Control SystemsThe line is equipped with independent control panels per machine for flexible operation and maintenance. The SIAT SM11-S case sealer features three-phase power and fixed speed controls suited for consistent end-of-line sealing. Emergency stop controls and illuminated indicators are present on operator stations, supporting safe and efficient operation. Quick adjustments on the case sealer and dedicated orienting controls on the cork orienter streamline format setup.Power architecture: Three-phase systems on end-of-line case sealerHMI/controls: Dedicated operator panels on each machineSafety: Emergency stop devices and CE-compliant guardsProduction Line Integration CapabilitiesConfigured for inline operation, the equipment set provides a coherent flow from filling and closure application through thermal treatment and carton sealing. The wirehooder interfaces downstream of bottle closure for sparkling applications, while the pasteurizer integrates within the thermal treatment step. End-of-line case sealing allows seamless integration with upstream conveyors and pack handling.Inline integration between filling, closure application, pasteurization, and case handlingAuxiliary lobe pump supports product transfer and utility circulationCork orienter enhances closure logistics and line ergonomicsMachine Condition & Maintenance HistoryThe line comprises robust, industry-standard machinery known for long service life and maintainability. Components display CE compliance and typical operator safety features. Offered as a second hand configuration, it is presented as ready for operation subject to standard installation, commissioning, and routine checks according to manufacturer guidelines.Operational Performance & VersatilityDesigned for glass bottle beverage production, the equipment supports core processes including filling, wirehood application, thermal pasteurization, and secondary pack... Hsdpfoyhb Ahex Ahgst

Condition: used, Year of construction: 2000, machine/vehicle number: LC574, Technical Specifications & Performance Data This used bottling line is a complete isobaric PET solution engineered for high-volume beverage production of still water, sparkling water, and carbonated soft drinks. Built around robust Krones and Simonazzi process equipment with a Sidel SBO14 S2 blow molder, it offers dependable industrial packaging performance with consistent product quality. Line type: Used isobaric PET complete bottling line (second hand) Nominal speed: up to 18,000 bottles/hour (configured for 2.0 L PET; format-dependent) Bottle formats: 0.10 L and 2.0 L; additional formats possible with change parts Container type: PET (air-conveyed handling) Product range: Water (still and sparkling), CSD Hedpsw D E Ubsfx Ahget Core technology: Isobaric rinsing/filling/capping monoblock with downstream labeling and end-of-line packaging Line composition: Approx. 14 integrated machines including blow molder, air conveyors, rinser, isobaric filler, capper, labeler, packer/shrink wrapper, palletizer, stretch wrapper, inspection and coding modules Main manufacturers: Krones, Simonazzi; blow molder: Sidel SBO14 S2 Years: Main line 2000; blow molder 1999 Condition: Ready for operation; safety features included Advanced Automation & Control Systems Centralized PLC/HMI control coordinates blow molding, rinsing, isobaric filling, capping, labeling, and end-of-line functions. Recipe management supports format and product changeovers, with synchronized conveyors and VFD-driven motors to maintain constant flow at high speed. Line accumulation and defective-bottle rejection are integrated to minimize downtime and scrap. Automation level: Fully integrated, recipe-based operation Operator interface: Intuitive HMI with alarm diagnostics and production reporting Electrical: Industrial 3-phase supply (typical 400–460 V, 50/60 Hz; to be confirmed on inspection) Safety: Interlocked guards, emergency stop network, and category-rated safety circuits Production Line Integration Capabilities Designed for seamless integration across the packaging hall, the line interfaces upstream with preform handling and syrup room/premix systems and downstream with packers, palletizers, and warehouse logistics. Fast format change procedures and clearly defined change parts enable efficient switching between bottle sizes and product SKUs. Compatible with standard beverage production utilities (CIP, CO₂, chilled water) Interfaces available for inspection systems, laser/inkjet coding, and vision verification Modular conveyors allow adaptation to plant layouts and future upgrades Machine Condition & Maintenance History This second hand complete bottling line is in ready-for-operation condition with safety protections installed. The equipment has been maintained in a production environment and inspected for functional performance. Maintenance records, documentation, and layout drawings can be made available for review during a technical visit. Operational Performance & Versatil...

Year of construction: 2026, condition: new, Complete-turnkey production line for acoustic barrier panels with roll forming, punching and cutting systems. Bosporas Machinery | AYIKA is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. This acoustic barrier panel production line is designed for the manufacturing of high-quality noise barrier panels used in highway, railway and infrastructure projects. The system provides a complete and integrated solution from coil feeding to finished panel output. The line includes hydraulic coil car, hydraulic decoiler, straightener feeder with welding unit, hydraulic press, hole punching system, roll forming machine, cutting system and exit conveyors, ensuring continuous and efficient production. Material Compatibility: CR & HR Steel, Galvanized Steel (HDG), Stainless Steel, and High-Grade Aluminum Alloys Material Thickness (Steel): 0.50 mm – 3.00 mm Material Thickness (Aluminum): Up to 4.00 mm Maximum Coil Width: Up to 1250 mm (Compatible with international standard coil sizes) Coil Weight Capacity: Up to 10 Tons (High-tonnage decoiler integration) Production Speed: Variable up to 30 m/min (Optimized for high-volume manufacturing) Profiling Precision: High-tolerance roll forming with advanced servo-motor technology LINE COMPONENTS Hydraulic coil loading car Hydraulic decoiler Straightener feeder with tail-to-tail welding system Hydraulic press (20 Ton) Hole stamping and notching system Roll forming machine (22–28 stations options) Hydraulic cutting system Exit conveyor system ENGINEERING FEATURES CNC machined robust machine structure High precision roll forming system Servo controlled feeding system Hardened rollers (58–60 HRC) Modular and customizable design Integrated automation system ADVANTAGES Complete turnkey production solution High precision and repeatability Continuous and stable production Short lead time compared to European manufacturers Hsdpfx Aheyy Spksget Custom design according to project requirements APPLICATION AREAS Highway noise barriers Railway acoustic panels Industrial sound insulation systems Infrastructure projects OPTIONAL CONFIGURATIONS Different station quantities (22 / 26 / 28 stations) Customized panel design and tooling Automation and control upgrades Integration with coil processing systems REFERENCE PROJECTS Images included in this listing represent reference installations of similar acoustic barrier production lines successfully delivered and commissioned in recent years. These projects demonstrate our proven engineering capability and international project experience. Additional references can be shared upon request.

Condition: like new (used), functionality: fully functional, UV roller painting line Barberan , DMC , Cefla , Burkle 1300 mm. Complete : 1. Barberan roller coater Hjdpevcmi Ejfx Ahgjt 2. Barberan roller coater reverse 3. UV 1 tube dryer 4. Barberan roller coater 5. UV 2 tube dryer 6. DMC grinding machine . 7. Brush machine . 8. Barberan roller coater 9. UV 2 tube dryer 10. Burkle roller coater 11. UV 2 tube dryer

Condition: used, Year of construction: 2025, This is an external, dual-chamber water softening system manufactured by Hobart, model Hydroline Protect SD-H, year of manufacture 2025. The system has undergone a fresh inspection in our in-house workshop and is fully functional. Hodpfezt Idnsx Ahget The list price is €2,395 net / €2,850.05 gross. Our price: used, year of manufacture 2025: €1,290 net / €1,535 gross. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional – or your money back. Flexible shipping or self-collection options. Competent advice – before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Testing according to DGUV V3. Technical data: Dimensions: W x D x H: 360 x 360 x 585 mm Weight with/without packaging: 21/19 kg Maximum water hardness: 40°dH Salt tank capacity: 20 kg Salt consumption per regeneration: 0.5 kg Continuous flow rate: 2-20 L/min Temperature: min. 2 / max. 65°C Condition: used, inspected, fully functional. Customer benefits: Optimally protects all downstream machines from limescale - extends maintenance intervals and service life. Cost-effective, external water softening system. Compact dimensions, removable castors. No power connection required. The system is regenerated in parallel with the rinsing process. The water softening system provides softened water 24 hours a day. Basic model: A high-quality ion exchanger removes the limescale-forming minerals from the water and adds water-soluble sodium salt in an exchange process. The total hardness of the raw water is thereby reduced to 0°dH. The water softening system consists of a pressure-resistant and corrosion-resistant tank. Tank material: plastic. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to change and errors. Do you have any questions, would you like advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday, 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, mileage: 33,219 km, power: 187 kW (254.25 HP), first registration: 07/2002, fuel type: diesel, overall weight: 13,150 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2022, color: beige, gearing type: automatic, emission class: euro5, Equipment: air conditioning, * Radio * Adjustable fifth wheel coupling * 6-cylinder in-line engine from Mercedes * All-round warning lights * Fog lights * Toolboxes ----* Front axle tire dimension: 10R22.5 * Rear axle tire dimension: 10R22.5 * Fuel tank: 180 liters * Technically permissible total weight: 13150 kg * Gross vehicle weight: 26000 kg * Unladen weight: 5400 kg Hodpfxjy Rdhgo Ahget * Overall length: 6100 mm ----?Vehicle number: 11970----Errors and prior sale excepted----Advertisements and various inscriptions have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, assistance with financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport services.----YOUR VTS TEAM

Condition: used, empty load weight: 7,360 kg, maximum load weight: 25,640 kg, overall weight: 33,000 kg, axle configuration: 3 axles, first registration: 01/2017, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, Krone SD Tautliner | Edscher roof | Coil trough | BPW axles with disc brakes | Toolbox | Tyres: 385/65 R22.5 | Perforated frame for load securing | Subject to errors, input mistakes, and prior sale. Hjdpfey E R I Aex Ahgst

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 9,000 kg, cutting height (max.): 1,200 mm, cutting width (max.): 1,100 mm, roll diameter: 1,400 mm, total width: 2,100 mm, total length: 2,400 mm, input voltage: 220 V, saw band length: 10,450 mm, saw band width: 206 mm, power: 90 kW (122.37 HP), empty load weight: 19,000 kg, cutting speed: 40,000 mm/min, Equipment: cabin, We are selling a complete sawmill line with a VTZ 1400 PLUS vertical band saw from Mebor. The offer includes: - VTZ 1400 PLUS vertical band saw by Mebor - Heavy-duty log conveyor with loading arms - Log edger/canter BM900 by Mebor - Operator cabin for the vertical band saw - Roller and chain conveyors - Edging line VR800 S by Mebor with servo-driven, high-speed circular saw positioning - Twin-shaft multi-blade circular saw VC 900 D by Mebor - Waste conveyor line - Chipper shredder for waste TH200/500/3 by Rudnick & Enners Hodpexq Rgyjfx Ahgjt - Sorting line 47-14 by Holzmatic

Condition: used, functionality: fully functional, Price with dismantling. Drysorter with control system Mitsubishi A2. Drysorter capacity 80 pc/min after rebuild 2021 new control system Siemens S7 Hedpjyzhvvofx Ahgst 1500, ABB580 frequency converters and Finscan 2019 automatic sorter. Drysorter equipped with Dynagrade 2015 (updated 2020).

Condition: good (used), Bacciottini Pit Stop DG LINE 8000 Automatic Creasing Machine Fully operational and ready to use. This is the most efficient creasing and perforating system on the market, featuring a robust design. Made in Italy. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. The set includes creasing and perforating tools. Technical data: Maximum sheet size: 500 x 700 mm Min. sheet size: 80 x 100 mm Maximum speed (for A4 format): 8000 sheets/h Material weight: 80-400 GSM Maximum number of creases per sheet: 20 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 230 V Power consumption: 2 kW Weight: 180 kg Hedpozt H Rajfx Ahgot Dimensions: 1500 x 750 x 1200 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, DESCRIPTION: Complete production process: hydraulic uncoiling, guided feeding, roll forming, hydraulic post-cutting, and automatic run-out/stacking. Profile-specific tooling for TR153 / 290 / 870 high-profile sheets. Full mesh safety guarding around the main forming section. Siemens PLC/HMI control and Schneider frequency-controlled main drives. Profile: TR153 / 290 / 870 Standard sheet thickness: 0.70-1.50 mm Feed coil width: 1,500 mm Overall / effective width: 900 mm / 870 mm Hodpfxjzvaibs Ahgot Profile height / pitch: 153 mm / 290 mm Maximum profile length: unlimited Working speed: 15 m/min Location of the line: Serbia

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Hsdpfx Aoi Akrkohgst Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Condition: ready for operation (used), Dry sorting line (17 pockets) Manufacturer - SATEKO (Valmet) modified - 1996 (7pcs) & 2023 (3pcs) Total number of pockets - 17 pcs Hedpoxmr Rrsfx Ahgjt Separate rake conveyor on top. Drop from above Latest update 3 pockets in 2023 (Biocone) Main layout attached

Year of construction: 2024, operating hours: 10 h, condition: ready for operation (used), functionality: fully functional, screw conveyor diameter: 145 mm, TECHNICAL DETAILS Throughput (depending on material, bulk density, and recipe): 200 - 300 kg/h Extruder type: Single-screw extruder / melt extruder Screw diameter: 145 mm Heating: Induction heating Heating processing temperature: over 300°C possible Hjdpfxozr Hz Ae Ahgjt MACHINE DETAILS Drive Drive power: 45 kW Voltage: 380 V Frequency: 50 Hz Rated current: 84.2 A Speed: 1,480 rpm Protection class: IP55 Insulation class: F Operating mode: S1 – continuous operation Sound level: 71 dB(A) Year of drive manufacture: 2022 Star/delta connection possible Suitable plastics: LDPE, HDPE, PP Suitable materials: Ground material, EPS, film scraps, ground film, and light plastic waste Material feed: Suitable for materials with low bulk density Operating hours: 10 h EQUIPMENT Metering device Hopper for material feed Large filter / screen changer Adapted die

Condition: ready for operation (used), Year of construction: 2003, Complete Tetra Pak line TBA 21-1000 Slim, includes: 1. TBA/21 1000 Slim filler, V050, YOM 2003, 52.000 running hours 2. CAP30 cap applicator for Helicap23 Pro26 3. Easy Ride Terplus cartons accumulator 4. TCBP70 wrap around packer 5. Conveyor system 6. Conveyors system The line is in very good condition, still in production till April. Hodpjycwvaofx Ahgst Can be sold without CAP30 applicator.