Used Cereal Bar Line for sale (22,541)

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester, barometer Bsdsyfayyspfx Aafecu -Manufacturer: TGL, Manometer -0.06 - 0 bar / -6 - 0 kPa, unused, original packaging -Type: KM 160 -Number: 8x pressure gauges available -Price: per piece -Cardboard dimensions: 190/180/H70 mm -Weight: 0.8 kg/pc.

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: TGL, Manometer 0-600 bar, unused, original packaging -Type: 1/BM 20/2 160 0-600 kg/cm² -Number: 20x pressure gauges available -Price: per piece -Cardboard dimensions: 200/200/H70 mm Bcedsyd S Rbepfx Aafju -Weight: 0.9 kg/pc.

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester Bcedsyd H H Ropfx Aafsu -Manufacturer: TGL, Manometer 0-10 bar, unused, original packaging -Type: 1/BM 20/2 160 0-250 kPa -Number: 14x pressure gauges available -Price: per piece -Cardboard dimensions: 200/185/H70 mm -Weight: 0.9 kg/pc.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 100,000 h, functionality: fully functional, controller model: partially manual, total length: 65,000 mm, overall weight: 40,000 kg, input voltage: 4,000 V, type of input current: three-phase, Equipment: chip conveyor, corrugation cardboard line, C,B,E flute 1530mm units,the bobbin feet of the machine 4/3single 1 double ,glue transfer unit, heating tunel, side cutting and cut off unit, Included the gaz and air stations, glue preparing unit. all are parts of the production line. Bcsdpfx Aaswycrcsfou

Condition: good (used), Flott p40 with Dofra feed on x, y, z axes. Automatically controlled. Stroke x: 6500 mm Stroke y: 355 mm Stroke z: stroke of the drilling spindle on the drill machine, adjustable from 0 to 160 mm Morse taper MK4 Drilling up to 40 mm Tapping up to M30 Bcjdpfoygrybox Aafju Programmable via touchscreen The drilling process runs fully automatically after setup.

Condition: used, Year of construction: 2000, machine/vehicle number: LC593, Technical Specifications & Performance Data This used bottling line is a complete, second hand pharmaceutical packaging solution designed for the filling and packaging of glass bottles for infusion-type applications. The line is currently in production and supports multiple dosage formats with integrated washing, filling, capping, crimping, sterilization, inspection, labeling, cartoning, and palletizing. Engineered for sterile handling, it uses purified water (PW), water for injection (WFI), and sterile compressed air in critical stages. Production speed: 3500 bottles per hour Bottle volumes supported: 0.2L, 0.25L, 0.4L, 0.5L Container type: Glass bottles (infusion/IV-style) Line configuration: Depalletizer, Bottle Washer (PW/WFI + sterile air drying), Filler, Vacuum stage, Bottle Capper, Aluminum Crimping Machine, Tray Loader, Autoclave, De-trayer, 2 x Manual Inspection Stations, Labeling Machine, Cartoning Machine, Carton Sealer, Palletizer Sterilization: Autoclave by SBM Operation status: In production Bjdpfxsydpa Ts Aafocu Advanced Automation & Control Systems The line features integrated handling and synchronized conveyors to maintain steady flow through washing, filling, closing, and terminal packaging stages. Manual visual inspection stations are positioned downstream of sterilization to ensure product quality. Format changeover is designed to handle multiple bottle sizes from 0.2L to 0.5L, enabling efficient batch transitions. Standard pharmaceutical best practices such as sterile air drying and clean utility segregation support controlled operations. Electrical parameters and PLC/HMI specifications are line-dependent and can be aligned with site utilities. Production Line Integration Capabilities As a complete packaging line, this system operates in-line from depalletizing to palletizing. The upstream sections prepare and clean glass containers, the midstream modules manage accurate filling and secure closure with crimping, and the downstream area performs sterilization, inspection, labeling, case packing, sealing, and palletizing. The line offers multi-format flexibility for 0.2L, 0.25L, 0.4L, and 0.5L glass bottles and can be integrated with site-level quality systems and traceability procedures. Conveyors and accumulation zones are configured to balance cycle times across process steps. Machine Condition & Maintenance History The line is currently in production, indicating ongoing operability and maintained status. Washing with PW/WFI and sterile air drying underscores disciplined hygienic routines aligned with pharmaceutical processing. Regular operation across all stations—from depalletizer through palletizer—demonstrates a cohesive, production-ready asset suitable for immediate deployment after site adaptation. Operational Performance & Versatility Designed for glass bottles and sterile liquid products, the line combines precise filling with a dedicated vacuum stage and reliable closure via capping and aluminum crimping. The presence of an autoclave enables post-closure sterilization, while dual manual inspection stations provide visual particle control. The labeling, cartoning, and palletizing modules complete an end-of-line solution for industrial packaging, reflecting tec...

Condition: used, machine/vehicle number: LC594, Technical Specifications & Performance Data This complete PET bottling line is engineered for carbonated water and soft drinks, delivering consistent output and reliable quality for beverage production. It combines high-efficiency blowing, isobaric filling, labeling, packaging, and end-of-line automation into a cohesive used bottling line suitable for second hand industrial packaging operations. Production speed: 13,000–14,000 bottles per hour Containers: PET bottles, neck finish 28 1881 Blow molder: Sidel SBO10, 10 cavities Preform handling: Sidel EBH 2050 preform hopper Air conveyor: Sidel-Alsim Rinser/Filler/Capper monoblock: Sidel-Alsim PET Trybloc Asmojet 1T RV-P 48/60/10K Bcsdeydn A Hspfx Aafsu Rinser: 48 clamps, 1 water treatment Filler: 60 isobaric valves Capper: 10 heads Premix/Mixer: Sidel-Alsim, 30 m³/h output Bottle dryer: ACI Labeling machine: Krones Contiroll, rotary, 15 stations, PET wrap-around, roll-fed Shrink wrapper: Acmi Fenix, film-only configuration Handle applicator: Smipack HA 35-50-70 Palletizer: Alsim Valiant 1I 1P, fully automatic, push-type Pallet wrapper: PM Pragometal OBS Rotomatic Standard Advanced Automation & Control Systems The line integrates component HMIs and automatic control features at each station to streamline operation and changeovers. The isobaric filling block ensures precise filling for carbonated beverages, while the roll-fed rotary labeling system supports continuous, high-speed label application. Quick-change mechanical adjustments and format components help maintain uptime and reduce setup times in beverage production environments. Production Line Integration Capabilities Designed for inline operation from preform loading through palletizing, the system features smooth bottle transfer via air conveyors and synchronized starwheels in the filling monoblock. It integrates upstream blowing with downstream labeling, shrink wrapping, handle application, and palletizing, creating a complete packaging machinery solution. The line is suitable for carbonated water and soft drinks and supports multiple PET bottle formats and heights associated with the 28 1881 neck finish. Machine Condition & Maintenance History This second hand line is available for sale and is presented in ready-for-operation condition. Component years range from 1996 to 2019, reflecting a well-curated selection of bottling equipment. Buyers can arrange inspection to assess performance, equipment condition, and overall line integration prior to deployment in beverage production. Operational Performance & Versatility Optimized for carbonated products, the isobaric filler provides accurate CO₂ retention and foam control. The Sidel blow molder delivers stable bottle quality, while the Krones Contiroll rotary labeler ensures precise PET wrap-around label application at the stated throughput. Downstream packaging includes film-only shrink wrapping and automated handle application for multipacks, with automated palletizing and pallet w...

Condition: used, Year of construction: 1996, Technical details: number of spindles: 8 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Bcjdoydnglopfx Aafju Type: AF32 S Dnt Yob: 1996 Eight-spindle automatic lathe with 8 main spindles max. nominal diameter: D=32mm Spindle drum with hirth coupling configurable as 2x4 spindles, pick up preparing in positions 4 and 8 Thread cutting couplings Electronic cross slide adjustment in positions 1, 2, 5, 6; 2 independent feeds Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA40/42/P) Coolant tank with hinged chip conveyor Control: Siemens S7-300 PLC Display device: Siemens Simatic HMI Delivery without BDE Tooling included in the scope of delivery may differ from the images Please, contact us for getting more information and pictures on mail(at) or *

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Bedpju Tg I Dsfx Aafjcu Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: used, Year of construction: 1997, Technical details: number of spindles: 6 spindle passage: 18 mm turning length: 63/50 mm Bcsdpowl Nm Dofx Aafou weight of the machine ca.: 8,6 t spindle drive motor: 11 kW

Condition: used, Year of construction: 2008, Technical details: number of spindles: 6 spindle passage: 18 mm Bodpfx Aasluhcgefecu turning length: 63/50 mm weight of the machine ca.: 4,5 t spindle drive motor: 11 kW

Condition: ready for operation (used), functionality: fully functional, A special machine is for sale. It is a complete production line for the manufacture of heating segments. The production line was built and developed by Bosch itself. The heating segments are suitable for instantaneous water heaters. You can see a picture of the segments in the 2nd picture of the picture gallery. The production line also includes a test station. Everything is apparently available in terms of documentation. Bedsydlgvspfx Aafscu

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, cutting width (max.): 760 mm, Equipment: safety light barrier, STC-Ref:G-172-3199 Schneider Senator-76 e-line ,Year: 1991 format: 0x760 mm equipped: - type: Schneider Senator 76-e-line - safety light beam Bcodpfxjygmf Se Aafeu - rear table guard - datastore for programmes - 1 spare knives - 2 sidelay tables - airtable - monitor --> available: 03/2026

Condition: ready for operation (used), Year of construction: 2008, A horizontal high-speed sausage linker Townsend (TECO) (filling, linking, hanging) for cellulose and collagen casings is available. Casing caliber (before cooking): 14.5mm-34mm, max. casing segment length: approx. 430mm, max. production capacity: 2750kg/h, total system dimensions X/Y/Z: approx. 5800mm/1850mm/1300mm, weight: approx. 900kg. On-site inspection is possible. Bcsdpfx Aajygmbyefsu

Condition: good (used), Year of construction: 2011, Weinig Conturex C4500 CNC Window production machine Description; Year of construction: 2011 Working width 25-260mm Working heigth 10-150mm Powergrip clamping table 3.000 mm Workpiece length 180-4500 mm First processing unit - 20 kW Motor - HSK 63F toolholder - Speed electr. adjustable 0-18.000 t.p.m. (left-right) - Tooldiameter max 330 mm - Sawblade diameter 280 mm - Toolwarehouse 18 positions (100mm distance) Second processing unit - 20 kW Motor - HSK 63F toolholder - Speed electr. adjustable 0-18.000 t.p.m. (left-right) Bcjdpoydkzxofx Aafsu - Tooldiameter max 330 mm - Sawblade diameter 280 mm - Toolwarehouse 18 positions (100mm distance) Powergrip outfeed Tool warehouse 110 positions (87,5 mm distance) Waste conveyorbelt Full description on request Available approx. wk 30/31 - 2026 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Year of construction: 1996, Rondo Compactline Bun Line Bcodsyglg Uopfx Aafou - used - year of manufacture: 1995-96 - components: Compactline work table, calibrator, cutting station, moistening station, filling machine, roller, rolling station, guillotine, receiving table, 4 cutting rollers, 3 decorations - length: 7.70 m - stainless steel construction - manual control - machine from production - complete overhaul available on request - ex stock - price on request

Condition: excellent (used), Year of construction: 2000, CORTALAZZI FINTEC CAN LINE MADE IN ITALY 1-Depal Model 2000 2-Rinser 2020 model Slim 250ml/330ml Bcjdpfx Aeygkzwoafsu Klasik 330 ml Sleek 500 ml 3-conveyour between depal and filler 10 mt 4-filler made in Italy Cortalazzi fintec 50 head model 2000 5-premix made in Italy Cortalazzi fintech model 2000 18.000 Lt/hour 6-Premix cooling heat exchanger gea NT50 model 2013 18.000 Lt/hour 7-seamer SIMA CFT-6 HEAD 2000 model Made in Italy 8-Pano (Cortalazzi fintec 2000 model) 9-35 mt conveyours between filler and shirink 10-twist for date coder 2 set 11-9 mt conveyours before shrink 12-2017 model Mimpak shirink made in Turkey 40 pack/minute 13-3 mt conveyours after shirink 14-Paletiser Ersey made in Türkiye

Condition: good (used), Year of construction: 2005, saw blade diameter: 800 mm, overall weight: 2,960 kg, 15 kW; 400 V; Bsdpfx Ajygk Hasafocu

Condition: used, Year of construction: 2011, functionality: fully functional, Bystronic / 2300 x 4500 mm R-L Bodpforr Tmcsx Aafecu 2300 x 4500 mm ( doch neu presse in 2011 von 2700 x 3500 mm) 15-60 mm 1000 kg Washer GW D 2300 VR 3 B 15 Gas press ZPG 2700 x 3500 mm VR SP 1 AS 15-60 mm 2300 x 4500 mm 1000 kg cy 2011 Sealing robot VA 1K-V 2300 x 4500 mm VR MOD PU ZD 15-60 mm 1000 kg 1-Kopf Versiegelungsautomat / 1 / GMR Stock Place: GMR ES

Condition: like new (used), Year of construction: 2019, Industrial production line for manufacturing nicotine and tobacco pouches, operating at full capacity. Production capacity up to 750 nicotine pouches per minute or 1,050 tobacco pouches per minute. The line is well-maintained, ready for immediate use, and ideal for increasing production capacity or entering new markets. The set includes a complete production line with all necessary equipment. Manufacturer: Merz-system Model: SB51-1T Year of manufacture: 2019 Condition: as new Category ID: 544 Type ID: 364 Type: Weighing and filling automatic machine If you have any questions or need further information, please write to us or call. Bjdpfx Asygilbsafscu

Condition: used, Year of construction: 1993, Used window production line, primarily utilized for historical window manufacturing (mostly Alt Wien profile). Sold as seen. Further information and price on request, EXW. Bcsdpsygh H Djfx Aafou

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed rate X-axis: 35 m/min, workpiece weight (max.): 50 kg, working height: 950 mm, controller model: Power Control Steuerung PC22 mit SPS Steuerung, Auction of an edge banding line! The line consists of the following machines: - BARGSTEDT O TSH200/D/30/12 - HOMAG OPTIMAT KFL 525/M1/C - HOMAG OPTIMAT TDL 510/C turntable - HOMAG OPTIMAT KFL 526/M2/C - HOMAG OPTIMAT TDL 510/C turntable - Wandres cleaning brush - BARGSTEDT O TSH200/D/30/12 HOMAG OPTIMAT KFL 525/M1/C TECHNICAL DETAILS Feed speed: 15–35 m/min Edgebanding capacity: Min. thickness: 0.6 mm Max. thickness: 3 mm Max. width: 30 mm Workpiece dimensions: Thickness: 12–40 mm Min. size: 250 × 240 mm Max. size: 2,500 × 1,200 mm Weight: 50 kg Panel overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control: Power Control PC22 with PLC control HOMAG OPTIMAT KFL 526/M2/C Max. feed rate for panel processing: 30 m/min Max. feed rate for edge processing: 25 m/min Workpiece dimensions: Thickness: 12–40 mm (L/W) min.: 250 × 240 mm (L/W) max.: 2,500 × 1,200 mm Weight: 50 kg Panel overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control: Power Control PC22 with PLC control HOMAG OPTIMAT TDL 310/C TECHNICAL DETAILS Feed: Steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TDL 510/C TECHNICAL DETAILS Feed: Steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TBH 200/D/30/12 TECHNICAL DETAILS Workpiece dimensions: Min. workpiece size: 240 × 240 × 12 mm Max. size, single track: 3,000 × 1,200 × 60 mm Max. size, double track: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Overlay overhang: 0 mm on all sides Protective boards: Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm HOMAG OPTIMAT TSH 200/D/30/12 TECHNICAL DETAILS Workpiece dimensions: Min. workpiece size: 240 × 240 × 12 mm Max. size, single track: 3,000 × 1,200 × 60 mm Max. size, double track: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Overlay overhang: 0 mm on all sides Protective boards: Min. protective board size: 800 × 240 × 19 mm Bodpfoyghwcox Aafecu Max. protective board size: 3,000 × 1,200 × 60 mm Note: More detailed information regarding the configuration of individual components can be found in the attached order confirmations.

Condition: used, Year of construction: 2019, For sale: Complete Wood-Mizer sawmill set, fully operational and ready for immediate use in a production facility. The set is designed for processing round timber and sawn timber production. The offer includes a Wood-Mizer LT70 band sawmill with auxiliary equipment for efficient log feeding, material offloading and sorting, as well as handling and loading operations. The sale is strictly for the complete line as a whole; components will not be sold separately. The Wood-Mizer LT70 sawmill features a full hydraulic system and automatic log loading, which greatly increases production efficiency and streamlines operation. The set consists of a Wood-Mizer LT70 SE25SRAHS2-SRP2R band sawmill, year of manufacture 2019, a 6-meter chain log conveyor, a Wood-Mizer CRD2H-LTR sorting table, year of manufacture 2021, and an Elephant F-250 vacuum lifting crane, year of manufacture 2017, suitable for manual material handling with a lifting capacity of 250 kg. Bcsdsyghirjpfx Aafou This package offers a complete solution for sawmill operations, enabling an efficient workflow for cutting, transport, and sorting processes. All machinery is fully functional and ready for continued operation. On-site inspection is available by prior arrangement. Price for the complete set: EUR 68,000 net Terms of sale: EXW (PL 38-120 Czudec) according to Incoterms 2020 Please contact us by phone for further information and to arrange an inspection.

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: GE-KEK-100L, Pre-treatment and Powder Coating Line with Curing Oven (1. Pre-treatment Cabin, 2. Powder Coating Booth, 3. Curing Oven) 1. Manual Chemical Pre-treatment Cabin – 1.6 × 1.6 × 2.2 m – 800 L • Cabin dimensions: 1,600 × 1,600 × 2,200 mm • Chemical tank: approx. 800 L • Pump/spraying unit: ST 84 HE • Heating elements: 2×6 kW (water temperature: 45–60 °C) • Motor: approx. 1.5 kW • Electrical connection: 3×380/220 V, IP68 protection • Manual spray operation, automated circulation, rinsing. Closed system ensures safe chemical handling • Spring-loaded nozzle technology – for pre-treatment directly prior to powder coating Condition: excellent, complete unit, EU-standard control panel, documented operation 2. Industrial Powder Coating Booth Dimensions (external): 1,850 × 1,600 × 2,600 mm • Extracted air: 3,000 m³/h • Motor: approx. 1.5 kW • Filter cartridges: 2 pcs + automatic cleaning • Electrical connection: 3 × 380 V/220 V, 50 Hz • Air velocity: 0.2–0.5 m/s • Max workpiece size (hanging): 250 mm × 1,000 mm • Spray opening: 1,100 × 1,100 mm Accessories: • Sheet metal construction with transparent panel • Extraction fan + silencer • Compressed air tank + preparation unit • Automatic filter cleaning, powder recycling container • EU-standard control cabinet, pneumatic system + air flow sensor Condition: • Good technical condition, well maintained • Complete documentation and fully operational system 3. Walk-in Industrial Curing Oven for Sale – 1.3 × 1.3 × 2.2 m – 200 °C We offer a professional walk-in curing oven for industrial use, in excellent technical condition! Main parameters: Bcodeygg Rnspfx Aafeu • Usable internal dimensions: 1,300 × 1,300 × 2,200 mm • Curing temperature: 180–200 °C • Curing time: 15–25 minutes • Heating capacity: 2 × 12 kW (electric heating) • Circulated air volume: 1,250 m³/h • Exhausted air: 100 m³/h • Motor power: approx. 1.5 kW • Insulation thickness: 150 mm • Year of manufacture: 2013 Accessories: • Thermally insulated chamber structure with door • Air circulation fan unit • Electric heating elements • Horizontal separator panel • Heat sensor + overheat protection • EU-standard control panel • Air flow sensor • Metal frame Condition: • Regularly maintained, good technical condition • Complete documentation • Ready for immediate operation

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 2099 653, Schirmer SAW machining center 1000-G4 “Basic” - (19 VEKA profiles) TO BE SOLD IN LINE WITH 1 FEDERHENN PROFILE DRILLING- AND MILLING CENTER SBZ 100G - SEE OTHER ADVERTISMENT Bcodjwnpiwspfx Aafou - direction of travel right to left. Aut. feeder magazine for manual loading of 9 profiles each max. 6,500 mm - pusher with NC-controlled gripper row 150 m/min, Min. remaining length that can be processed = 1200 mm.. - 2.2 kw saw NC-controlled +45/-45 - seal clamping and cutting device - 3-axis postshaper and seal milling machine 4.5-6.0 kw 3000/6000 rpm - control box: Microsoft Windows XP pro C9900-C538 Processor-Intel Core 2 DUO2.53 GHz - NC-controlled gripper row, belt conveyor 3000x2400, label printer