Used Celtic 14 Lathe for sale (31,691)

Condition: like new (used), Horizontal lathe Kfjdpsg R Sm Ijfx Affja Diameter above the bed 385mm Distance between centers: 900mm Spindle bore (mm) 51,5 Diam. above the carriage (mm) 220 Spindle speeds 38 - 1600 (16x) Motor power kW 2.94 Voltage (V) 380 Hertz (Hz) 50

Condition: used, turning diameter over bed 420 mm turning diameter over slide rest 290 mm turning length 900 mm turning diameter in the gap mm turning speeds 40 - 2000 U/min centre height 210 mm spindle bore 38 mm total power requirement 4,0 KW weight of the machine ca. 0,9 t dimensions of the machine ca. 2,4 x 1,1 x 1,3 m Lead and feed spindle lathe - 3-jaw chuck 220mm - Quick-change tool holder with 5 cassettes - Steady rest - Chip tray - Operating instructions Kedpfx Asvki Efeffefa

Condition: good (used), Leadscrew and feedscrew lathe type Celtic 12 Centre height: 160 mm Kedpjx Dy U Tsfx Affjfa Centre distance: 500 mm Spindle speeds: 35 - 1560 rpm Multifix tool holder A Lathe chuck Live centre

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 131720 € 2489.51 € 1020 mm 2000 mm 510 mm 358 mm 770 mm 560 mm 361 M 12 6,3 - 3 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 505 mm 270 mm 105 mm 6 MK 225 mm 18,5 kW 6400 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type D1, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 660 mm on both sides of the spindle, max. 250 rpm,gripping range 5-400 mm. Option: hard top special jaws (outside only), gripping range 80-400 mm Kfsdpfxowiq Dre Affsa 2 pcs. steady rests on supports Dm. 160 - 360 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: used, Year of construction: 2015, swing diameter 1.500 mm mm faceplate diameter 1.250 mm mm control Siemens 840 DSL Kfodpfxjnp Uhro Affsa tool taper 4 Stk. turning height 1.250 mm mm total power requirement / kW weight of the machine ca. / t dimensions of the machine ca. / m

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital readout, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE-compliant! Technical data: Year of manufacture: 2006 Kedpfx Asxyvbnjffjfa EMCO EMCOMAT 14 D Technical Data Working Area Travel distance in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4,000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MK 2 Quill stroke: 80 mm Dimensions (LxWxH): 1,280 x 730 x 1,480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe designed for the highest demands: with stepless speed control, constant cutting speed, and a robust 7.5 kW drive power (40% duty cycle). The compact machine with outstanding performance is ideal wherever maximum precision in limited space is required, such as optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is a lathe EMCO EMCOMAT 14 D with Emco digital readout, manufactured in 2006. This lathe is in excellent original condition. It was only used occasionally in special production. The control system is very user-friendly. The guides are regularly lubricated by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. You are welcome to inspect and test the EMCO EMCOMAT 14 D under power at our premises. You will find further lathes from renowned manufacturers on our website.

Condition: used, Technical details: turning diameter over bed: 320 mm turning length: 800 mm centre distance: 800 mm centre height: 150 mm spindle bore of work spindle: 30 mm range of revolution per miute: 35 - 1500 / 16 step U/min Kfodpfx Afou Ixy Defsa range of feed in x - axis: 0,04 - 2,4 / 30 step m/min tailstock quill adjustment:: 125 mm tailstock taper MT: MK2 dimension machine xH: 1,7 x 0,8 x 1,5 m Equipment and other features: -3-jaw chuck Röhm 160mm -chuck guard -protection system WxH: 510x400mm -Multifix tool clamp (4 pieces) -Tip in tailstock -Upper slide swivels +/- 45°, maximum travel = 100mm -Cross slide travel = 300mm feed Pump for coolant device (without feed) *

Condition: like new (used), functionality: fully functional, center height: 180 mm, GRAZIANO SAG 14 Lathe 1000 x 180 AP Bed length: 280 mm Carriage diameter: 220 mm Spindle mount: 5 Kfjdpfxoxf Hxuo Affja Number of spindle speeds: 12 Spindle bore: 51 mm Equipped with Elbo Controlli DRO USED MACHINE INTERNAL CODE: SER 47

Condition: good (used), Lathe, turning machine, lead screw lathe, lead screw lathe Kedpfsh Uuy Rex Affsfa -Manufacturer: Mondiale, lead screw lathe type Celtic 20 -Turning length: 1200 mm -Turning Ø over bed: 440 mm -Turning Ø without bed: 640 mm -Turning Ø over support: 280 mm -Spindle bore: Ø 45 mm -Spindle speeds: 22 - 1000 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl. bezel, tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 1120/2230/H1215 mm -Weight: 1276 kg

Condition: excellent (used), Technical Data H.PUNCHES MM.482 D.PUNCHES MM. 14000 DIAM.TORN. GUIDES MM.965 CARRIAGE TURNING DIAMETER MM.685 Kedog Anh Uepfx Affefa RPM 375 MAND. DIAM.MM.155 BENCH WIDTH MM.1065 ENGINE POWER KW.44,72 APP. KG.33.300 Non-binding data to be verified / Data must be verified Standard equipment PLATEAU 4 JAWS IND.DIAM. MM.905 COUNTER-POINT TOOL TURRET N.2 BEZELS DIAM.MM. 975 CAD N.1 BEZEL COPYRIGHT

Condition: used, faceplate diameter 1.400 mm swing diameter 1.600 mm turning height 1.500 mm control Siemens 840 D workpiece weight 6.500 kg feed 3.600 mm/min. slide adjustment 1.000 mm turning speeds 10-315 mm/min. Kfjdpfsnp Uhnex Affja total power requirement / kW weight of the machine ca. / t dimensions of the machine ca. / m

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with EMCO digital readout, year of manufacture 2006, in excellent original condition. The machine comes from the special construction department of a renowned German mechanical engineering company. CE compliant!! Technical Data: Year of manufacture: 2006 Kfedpfx Aexyvbbsffea EMCO EMCOMAT 14 D Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Inner taper: MT 2 Quill stroke: 80 mm Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the Machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe designed for the highest standards: with infinitely variable speed control, constant cutting speed, and a robust 7.5 kW drive (40% duty cycle). This compact powerhouse excels wherever maximum precision is required in limited space, such as in optical, electrical, and automotive workshops, laboratories, and even in Formula 1. For sale is an EMCO EMCOMAT 14 D lathe with EMCO digital readout, year of manufacture 2006. This lathe is in excellent original condition. It comes from a facility where it was only lightly used for special construction purposes. It features an extremely user-friendly control. The ways are regularly lubricated by the central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power on-site. You will find more lathes from well-known manufacturers on our website.

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital display, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE compliant!! Technical specifications: Year of manufacture: 2006 Model: EMCO EMCOMAT 14 D Kfsdpfxjxyvaqs Affsa Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MT 2 Quill stroke: 80 mm Dimensions Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe for the highest demands: with stepless speed control, constant cutting speed and an impressive 7.5 kW drive power (40% duty cycle). This compact machine with outstanding performance is ideal wherever maximum precision is required in limited spaces, such as in optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is an EMCO EMCOMAT 14 D lathe with Emco digital display, year of manufacture 2006. This lathe is in excellent original condition and comes from a facility where it was only used occasionally for special applications. The control system is very user-friendly. The guideways are lubricated regularly by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power at our premises. You will find more lathes from renowned manufacturers on our website.

Condition: used, greates pass round over bed 540 mm swing diameter over face slide 370 mm centre distance 3000 mm centre height 270 mm turning dia. in gap 815 mm bed width 344 mm spindle bore 88 mm spindle diameter in front bearing 133 mm spindle taper 11" D1 Camlock turning speed range 18-1400 U/min turning speeds 16 3-jaw chuck Röhm Ø 315 longitudinal feeds: 0,06-1,0 mm face feeds 0,03-0,5 mm metric threading 0,4-14 mm inch threading 2-72 G/1" thread - module 0,3-3,5 mm thread - DP 8-60 Pitch tailstock quill diameter 75 mm quill stroke 230 mm taper of tail spindle MK 5 slide valve travel 280 mm upper head travel 150 mm Overall size ca. 4700 x 1100 x 1400 mm weight ca. 3200 kg power capacity 9,4 kW Accessories: 3-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Kfsdpfoxnqzxox Affea Turning chuck guard Rear chip guard Coolant device Work light manual available

Condition: excellent (used), Year of construction: 2010, swing diameter 1600 mm faceplate diameter 1400 mm Control Siemens Sinumerik 840D SL turning height 1245 mm max. table load 9000 kg table drive 60 kW torque - table 13400 Nm Table rpm 450 1/min speeds c-axis 0,004-5 1/min. feed range 18000 mm/min dimensions of the machine ca. 8,5 x 5,3 x 5,7 m weight of the machine ca. 47,4 t Crossbeam support: -Travel range X-axis: ± 950 mm Crossbeam stroke W-axis: 600 mm Ram : -Cross-section Ram: 250 x 250 mm -Plunging diameter: 340 mm -Travel Z-axis Ram: 1100 mm Drilling and milling device: - Distance between milling spindle and machine table 1245 mm - Tool holder SK 50 - Drive power 30 kW - Speed range 2000 rpm - Torque 1395 Nm Kfedpfoxylm Tjx Affja Equipment/accessories: -16-40-fold pick-up magazine -Protective device -Various turning tool holders -Various SK50 tool holders and tools -Various clamping devices -Coolant device with filter -Chip conveyor -Documentation

Condition: new, Year of construction: 2025, Immediately available stock machines subject to prior sale. Please contact us for an offer. Emcomat 14 D conventional lathe center width 650 mm Center height 140 mm Max. Speed 4000 rpm Spindle connection size 4 (DIN 55029) Max. Drive power 7,5 kW Dimensions (LxWxH) 1280 x 1480 x 730 mm Machine is equipped with digital display. (Constant cutting speed within gear stage) Kodpfedtmy Tjx Affefa As a regional factory representative of EMCO we offer maintenance, service and spare parts for conventional machines from EMCO. Visit our showroom in Stuttgart and contact us for a qualified consultation.

Year of construction: 2010, condition: reconditioned (used), Technical characteristics SC 1400 CC:  Plate diameter 1250 mm  Maximum turning diameter 1400 mm  The maximum height of the part under the crossbar 1000 mm  Maximum weight of the part on the plate 6000 daN  Stroke of the right vertical slide 800 mm  Side slide stroke 650 mm  Plate rotation speed 5-250 rpm  Range of working advances 0.05-5 mm/rot  Machine weight 15500 daN Kfedpfoihczyox Affoa  Machine dimensions (L x W x H) 4060 x 4450 x 3900 mm The vertical lathe SC 1400 CC - SIEMENS, is built with a monobloc hammer made of special alloyed cast iron, type MECHANITE. The mobile crossbar has rectified horizontal guides. The lathe is equipped with a vertical support with a revolver head for 5 tool holders and a side support. The main drive is provided by a 3-speed gearbox (transmission ratios 1:9, 1:3, 1:1) continuously adjustable, which is driven by a 75 KW electric motor and a SIMOREG electronic variator from SIEMENS. The work and fast advances of the vertical support on the X and Z axes are realized by transmission with ball screws from STAR REXROTH and electromagnetic couplings TELCOMEC ITALIA. The hydraulic unit is mounted on the drum and provides the following functions: - Automatic gear change (1:1; 1:3; 1:9) - automatic lubrication of the gearbox - dynamic balancing of the vertical support - locking and unlocking of the mobile crossbar on the baton guides The hydraulic components of the power plant are imported from ATOS ITALIA. The centralized lubrication systems from the crossbar and work supports are made with AZETA ITALIA components. The stroke limitation and safety systems are made with microswitch blocks from EUCHNER - GERMANY, which perform the following functions: - stopping at a fixed rate with confirmation in the rate display - protection against collisions and damage limits For turning flat surfaces at constant speed, the electrical equipment is provided with the function V = K of cutting at constant speed. The electrical panel and the mobile control desk are made with SIEMENS, EATON, SCHNEIDER components. The machine is automated with a programmable SIMATIC PLC S 7-300 from SIEMENS. Display of dimensions with measuring rulers for the vertical support and the lateral support for 2 + 2 axes.

Condition: used, Year of construction: 1980, VDF Wohlenberg Type:V1400 Parts . Top support : Overall height : 600 mm Overall length : 650 mm Base plate : 350 mm X 350 mm Base plate holes diameter : 22 mm Spacing: width 240 mm lengthwise : 290 mm Tool holder mounting : 100 mm X 45 mm Thread tool holder M30 . Tailstock: Center height : 630 mm Quill diameter : 100 mm Base plate : 500 mm X 400 mm . Faceplate : Diameter 1000 mm Width : 125 mm with 3 jaws Spindle holder 250 mm 4 bores diameter 20 mm pitch circle 200 mm . Kjdpfx Aetttigjffsfa Sale individually or in a package possible .

Condition: good (used), Scope as per image. Infinitely variable speed up to 3,000 rpm. Kfodsx Hfffopfx Affja

Condition: used, Year of construction: 2010, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2010 Control : Siemens 840 D Turning length : 1245 mm In General: Year of construction:2010 Control system:Siemens 840 D Rotation diameter:1,600 mm Rotation height:1,245 mm Spindle / Table: Technology:Geared spindle Speed:450 rpm Power:60 kW Torque:13,400 Nm Faceplate:1,400 mm Max. table load:9,000 kg Tool carrier: Traverse path crossbeam:600 mm Traverse path chisel slide Z-axis:1,100 mm Traverse path chisel slide X-axis:+/- 950 mm Kjdpfxjx Axyre Affefa Max. plunge diameter:340 mm Cross-section of chisel slide:250 x 250 mm Milling unit:2,000 rpm, 1,395 Nm Tool holder:SK 50 Equipment: Tool magazine:40 stations Chip disposal:Chip conveyor Coolant supply:IKZ system Tool holders:Various tool holders

Condition: good (used), functionality: fully functional, Used EMCO EMCOMAT 14D lathe in good condition Toolmaker's precision Travel in X/Z: 135 / 590 mm Distance between centers: 650 mm Center height: 140 mm Infinitely variable speed control Constant cutting speed MAIN SPINDLE Max. speed: 4,000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Guideways hardened and ground 3-point mounting of the machine bed Diagonally ribbed, induction-hardened machine bed Rigid, split leadscrew cover Electromechanical spindle brake Chuck guard The machine is equipped with the following options: Quick-change tool holder EMCO 3-AXIS POSITION DISPLAY (TURNING) Chip protection door Machine lamp Coolant device Tool drawer Current new price: approx. €32,130 gross, plus the listed options Can be demonstrated and tested under power. Kfsdpfx Afex Emp Ajfoa Free loading by forklift or crane.

Condition: excellent (used), Year of construction: 2019, 460mm swing over bed, 270mm swing over cross slide, 1500mm Distance between Centres, Kfedpew Naxqofx Affoa 2200rpm spindle, 77mm Spindle Bore, 11kW spindle motor, FANUC OI-TD CNC control, Tailstock, 300mm 3 jaw chuck, coolant, 8 station turret, coolant

Condition: new, Year of construction: 2026, Turning diameter support 1020 mm turning diameter over bed 1400 mm Turning length 4000 mm X axis 600 mm Spindle bore 630 mm Spindeldrehzahl 250 U/min Ksdpfx Aofryupsffsfa

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head Kfedpfxovi Hryo Affsa spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .

Condition: used, Year of construction: 1981, Distance between centers: 1300 mm Copy length: 1250 mm Machine center height: 250 mm Center height above support: 160 mm Slide feed speed: 3 m/min Weight: 630 kg Speeds: 500-1000-1500-3000-2100-4200 rpm Hydraulic Kjdevvkt Ispfx Affofa Storage location: Nattheim