Used Celtic 14 Lathe for sale (14,544)

Condition: used, functionality: fully functional, Year of construction: 2015, load capacity: 6,000 kg, lifting height: 7,500 mm, fuel type: gas, mast type: triplex, construction height: 3,400 mm, fork carriage width: 1,460 mm, fork length: 1,400 mm, total length: 5,120 mm, drive type: Treibgas, construction width: 2,200 mm, Sideloader Load center: 700 Fork width: 200 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Dsdpfx Aowmtl Tsc Njun Front tires size: 3.00-15 Rear tires type: Superelastic Rear tires size: 3.00-15 Heating, full cab, full free lift, Platform height: 1030 mm

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 18,263 h, load capacity: 7,000 kg, lifting height: 6,300 mm, free lift: 2,100 mm, fuel type: diesel, mast type: triplex, construction height: 3,150 mm, fork carriage width: 1,540 mm, fork length: 1,400 mm, empty load weight: 11,050 kg, total length: 5,150 mm, drive type: Diesel, construction width: 2,280 mm, Sideload forklift Load center: 700 Fork width: 200 mm Fork thickness: 65 mm Duedpfx Aowwm Uvjc Nen Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 355/65-15 Rear tires type: Superelastic Rear tires size: 355/65-15 Description: In addition to this Baumann model, we have around 200 heavy duty forklifts, compact forklifts, standard forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing under favorable terms are always available. We are also happy to purchase your used equipment directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with comprehensive advice on this GS70/20/63TR. P.S.: Our master forklift workshop specializes in the repair, maintenance, overhaul, and custom construction of forklifts from 8 tons and above. We can also display your vehicle for commission sale. Fork positioner, Heater, Full cab, Full free lift, Platform height: 970 mm

Condition: used, functionality: fully functional, Year of construction: 1995, operating hours: 18,748 h, load capacity: 5,000 kg, lifting height: 5,100 mm, free lift: 1,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,650 mm, fork carriage width: 1,300 mm, fork length: 1,390 mm, empty load weight: 8,400 kg, total length: 4,670 mm, drive type: Diesel, construction width: 2,150 mm, Sideload forklift Load center: 700 mm Fork width: 200 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 3.00-15 Rear tires type: Pneumatic Rear tires size: 3.00-15 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, industrial trucks, and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing and financing at attractive terms are always available. We are also happy to purchase your used machine, even if you are not buying a vehicle from us. Our proprietor, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this DX50/14/51. P.S.: Our master forklift workshop specializes in repairs, maintenance, refurbishment, and custom builds for forklifts with capacities from 8 tons. We will also gladly display your vehicle on our premises for commission-based sale. 1x NIVO fork Duedpfx Acswx Syts Nen Heater, full cabin, full free lift, Platform height: 1050 mm

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 15,322 h, load capacity: 7,000 kg, lifting height: 5,700 mm, free lift: 1,800 mm, fuel type: diesel, mast type: triplex, construction height: 2,950 mm, fork carriage width: 1,540 mm, fork length: 1,390 mm, empty load weight: 11,800 kg, total length: 5,200 mm, drive type: Diesel, construction width: 2,280 mm, Sideload forklift Load center: 700 Dsdpfx Acewx Sy Hj Noun Fork width: 250 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Front tires type: Pneumatic Front tires size: 355/65-15 Rear tires type: Pneumatic Rear tires size: 355/65-15 Description: In addition to this Baumann model, we currently have approximately 200 heavy-duty forklifts, compact forklifts, standard forklifts & sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing and financing solutions with attractive terms are always available. We are also interested in purchasing your used machine outright, even if you don’t buy a vehicle from us. Our owner, Mr. Peter Sawitzki, would be happy to advise you in detail about this GX70/14/57TR model. P.S.: Our certified forklift workshop specializes in repair, maintenance, refurbishment, and custom modifications for forklifts from 8 tons. We are also happy to offer your vehicle for consignment sale at our location. 1x NIVO fork Heater, full cab, full free lift, Platform height: 1030 mm

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 20,687 h, load capacity: 5,000 kg, lifting height: 7,500 mm, free lift: 2,450 mm, fuel type: electric, mast type: triplex, construction height: 3,360 mm, fork carriage width: 1,460 mm, fork length: 1,400 mm, empty load weight: 8,950 kg, total length: 4,400 mm, drive type: Elektro, construction width: 2,220 mm, Electric side loader Load centre of gravity: 700 Fork width: 200 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tires type: pneumatic Front tires size: 355/45-15 Rear tires type: pneumatic Rear tires size: 355/45-15 Dusdpfx Acswd U A Is Nen Battery voltage: 80V Battery Ah: 930Ah Battery year of manufacture: 2013 Description: In addition to this Bulmor model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JEQn50/14/75TV P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Fork positioner, Heating, full cabin, full free lift, Platform height: 850 mm

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 9,780 h, load capacity: 5,000 kg, lifting height: 6,280 mm, free lift: 2,080 mm, fuel type: electric, mast type: triplex, construction height: 3,050 mm, fork carriage width: 1,540 mm, fork length: 1,400 mm, empty load weight: 12,170 kg, total length: 4,960 mm, drive type: Elektro, construction width: 2,240 mm, Electric sideloader Dodpow H Ecksfx Ac Nsun Load centre: 700 mm Fork width: 200 mm Fork thickness: 50 mm Mast type: Triplex Condition: Operational and fully functional Technical condition: Very good Front tyres type: Pneumatic Front tyres size: 3.00-15 Rear tyres type: Pneumatic Rear tyres size: 3.00-15 Battery voltage: 120V Battery capacity: 750Ah Battery year of manufacture: 2025 Description: In addition to this Baumann model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Hire purchase & financing under attractive conditions are always possible. We are also happy to purchase your used equipment directly, even without you buying a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to give you comprehensive advice on this EGX50/14/63TR. P.S.: Our expert forklift workshop specialises in repair, maintenance, refurbishment and custom builds for forklifts from 8 tonnes upwards. We can also display your vehicle for consignment sale at our premises. Heater, full cab, full free lift, Platform height: 1,020 mm

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,874 h, load capacity: 5,000 kg, lifting height: 7,510 mm, free lift: 2,500 mm, fuel type: electric, mast type: triplex, construction height: 3,480 mm, fork carriage width: 1,560 mm, fork length: 1,400 mm, empty load weight: 12,170 kg, total length: 5,000 mm, drive type: Elektro, construction width: 2,220 mm, Electric sideloader Load centre: 700 Fork width: 200 mm Fork thickness: 50 mm Mast type: Triplex Duedpowqtfzsfx Ac Non Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Pneumatic Front tyres size: 32x12.1-15 Rear tyres type: Pneumatic Rear tyres size: 32x12.1-15 Battery voltage: 120V Battery capacity: 750Ah Battery year: 2019 Description: In addition to this Baumann model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts and sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Hire purchase and financing at favourable terms are always possible with us. We are also happy to buy your used equipment outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to give you detailed advice about this EGX50/14/75TR. P.S.: Our master forklift workshop specialises in repair, servicing, reconditioning and special builds for forklifts from 8 t onwards. We are also happy to offer your vehicle for consignment sale. Heating, full cab, full free lift, Platform height: 1030 mm

Condition: new, empty load weight: 3,960 kg, maximum load weight: 10,440 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55 R 19,5, color: other, gearing type: other, front tire size: 385/55 R 19,5, rear tire size: 385/55 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, loading area length approx. 5,700 mm, side walls 600 mm high, galvanized, + lattice attachment 1,000 mm high, loading height approx. 990 mm, 4 x lashing eyes in the floor 5 t each, 8 x lashing eyes in the floor 3 t each, reinforced geared support winch with load and fast gear at the front, ?Wide tyres: 385/55 R 19.5, Chassis: Hot-dip galvanized, , Surcharge for:, Aluminium ramps (approx. 3,520 x 400 mm) load capacity 10 t per pair and 2 folding supports at the rear, Price: 1,500 Euro , , , -- Misprints, errors and omissions excepted, Sample pictures --, More data under: !, More Details: ! Dujdjyhrzuepfx Ac Nen

Condition: new, empty load weight: 3,740 kg, maximum load weight: 10,660 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55 R 19,5, color: other, gearing type: other, front tire size: 385/55 R 19,5, rear tire size: 385/55 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, loading area length approx. 5,700 mm, side walls 600 mm high, galvanized, loading height approx. 990 mm, 4 x lashing eyes in the floor 5 t each, 8 x lashing eyes in the floor 3 t each, reinforced geared support winch with load and fast gear at the front, ?Wide tyres: 385/55 R 19.5, Chassis: Hot-dip galvanized, , Surcharge for:, Aluminium ramps (approx. 3,520 x 400 mm) load capacity 10 t per pair and 2 folding supports at the rear, Price: 1,500 Euro , , , -- Misprints, errors and omissions excepted, Sample pictures --, More data under: !, More Details: ! Dujdpfxjyhrzzo Ac Nen

Condition: new, empty load weight: 2,030 kg, maximum load weight: 11,970 kg, overall weight: 14,000 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 1,800 mm, suspension: steel, tire size: 285 /70 R19,5, color: other, gearing type: other, front tire size: 285 /70 R19,5, rear tire size: 285 /70 R19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ZINCED, closed floor, skip according to DIN 30720 up to max. 15 cbm, or for ASK waste compactor, 2 x support, rear, loading height approx. 900 mm, tool box, , surcharge for ramps 1,600 ¤ net, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Dusdeyhrxmjpfx Ac Nen

Condition: used, Year of construction: 1960, spindle travel 3000 mm spindle stroke - max. 330 mm Djdpfx Acoyhrcfj Neun 2820

Condition: excellent (used), Year of construction: 2004, turning diameter 850 mm turning length 2200 mm Dedpoyhrb Usfx Ac Njun control Siemens 840 D

Condition: used, Year of construction: 2009, dist. between centers 4.500 mm greates pass round over bed 820 mm Dujdpfxsyhq Tve Ac Non Maximum cutting diameter 530 mm control Heidenhain Manual Plus 4110 workpiece weight max. 2.500 kg spindle bore 128 mm spindle nose DIN 55027 B11 turning speed range - spindle 0 - 1800 U/min phase 1 0 - 450 U/min phase 2 20 - 1.800 U/min Max. torque stage 1 3.000 Nm Max. torque stage 2 540 Nm travel -x axis 360 mm travel -z axis 4.500 mm feed capacity - x 10 kN rapid traverse 10.000 mm/min dia. of quill 115 mm total connected load 55 kVA machine weight ab. 7000 kg dimensions of the machine ca. 6.500 x 1.840 x 1.860 mmxmmxmm Equipment/accessories: -1 x faceplate -5 x jaw chucks -1 x closed steady rest -Clamping jaws -Multifix holder -Turning tools -Various tips -Technical documentation

Condition: good (used), Year of construction: 2018, Automation system Turning diameter over bed: 760 mm • Turning diameter over cross slide: 600 mm • Maximum turning diameter: 460 mm Distances • Distance spindle – tailstock center (TA640): 689 mm • Distance chuck – tailstock (TA640): 625 mm Travel paths • X-axis travel: 310 mm • Z-axis travel (TA640): 640 mm • Y-axis travel: +70 / −50 mm • B-axis travel (TA640): 640 mm Rapid traverse • Rapid traverse X: 30 m/min • Rapid traverse Z: 30 m/min Duodpfjyhqg Nsx Ac Nen • Rapid traverse Y: 15 m/min • Rapid traverse B: 11 m/min (optional 30 m/min) Axis dynamics • Axis acceleration: 1 g (9.8 m/s²) Spindle • Maximum spindle speed: 3500 rpm • Spindle bearing Ø outer: 200 mm • Spindle bearing Ø inner: 130 mm • Spindle nose: ASA 8” A2 • Spindle bore: 86 mm • Bar capacity through draw tube: 78 mm Chuck • Chuck Ø: 250 / 315 mm • Chuck bore Ø: 77 mm Power & Torque • Main spindle power: 42 / 27 kW (max. / S6 40%) • Maximum torque: • 1020 Nm (max.) • 720 Nm (S6 40%) Tailstock • Morse taper: MT5 / MT3 • Tailstock travel (TA640): 640 mm • Maximum quill pressure: 1350 kgf

Condition: good (used), Year of construction: 2018, Turning diameter over bed: • 760 mm Turning diameter over cross slide: • 600 mm Maximum turning diameter: • 460 mm Distance spindle – tailstock center TA400: • TA15: 490 mm • TA20: 473 mm • TA25: 473 mm • TA30: 449 mm TA640: • TA15: 730 mm • TA20: 713 mm • TA25: 713 mm • TA30: 689 mm TA1100: • TA15: 1190 mm • TA20: 1173 mm • TA25: 1173 mm • TA30: 1149 mm Distance chuck – tailstock TA640: • TA15: 666 mm • TA20: 649 mm • TA25: 649 mm • TA30: 625 mm TA1100: • TA15: 1126 mm • TA20: 1109 mm • TA25: 1109 mm • TA30: 1085 mm Travels X-axis: • All models: 310 mm Z-axis: • TA400: 400 mm • TA640: 640 mm • TA1100: 1100 mm Y-axis: • +70 / −50 mm (for Y versions) B-axis: • TA400: 400 mm • TA640: 640 mm • TA1100: 1100 mm Rapid traverses X-axis: • 30 m/min Z-axis: • 30 m/min Y-axis: • 15 m/min B-axis: • 11 m/min (standard) • 30 m/min (option) Axis acceleration: • 1 g = 9.8 m/s² Spindle Maximum spindle speed • TA15: 4,500 rpm Djdpfeyhqavsx Ac Noun • TA20: 4,000 rpm • TA25: 4,000 rpm • TA30: 3,500 rpm Spindle bearing Ø outer • TA15: 150 mm • TA20: 170 mm • TA25: 170 mm • TA30: 200 mm Spindle bearing Ø inner • TA15: 100 mm • TA20: 110 mm • TA25: 110 mm • TA30: 130 mm Spindle nose • TA15 / TA20 / TA25: ASA 6" A2 • TA30: ASA 8" A2 Spindle bore • TA15: 61 mm • TA20: 73 mm • TA25: 73 mm • TA30: 86 mm Bar capacity through draw tube • TA15: 52 mm • TA20: 66 mm • TA25: 66 mm • TA30: 78 mm Chuck Chuck diameter: • TA15: 175 / 210 mm • TA20: 210 mm • TA25: 250 / 210 mm • TA30: 250 / 315 mm Chuck bore Ø: • TA15: 56 / 52 mm • TA20: 66 mm • TA25: 66 mm • TA30: 77 mm Power & torque Main spindle power (kW): • TA15: 14 / 8 • TA20: 22 / 15 • TA25: 35 / 19 • TA30: 42 / 27 Maximum torque: • TA15: 292 Nm (max) / 153 Nm (S6 40%) • TA20: 366 Nm (max) / 286 Nm (S6 40%) • TA25: 900 Nm (max) / 363 Nm (S6 40%) • TA30: 1020 Nm (max) / 720 Nm (S6 40%) Tailstock Morse taper: • MT3 / MT4 Tailstock travel: • TA400: 400 mm • TA640: 640 mm • TA1100: 1100 mm Max. quill pressure: • TA15: 930 kgf • TA20: 980 kgf • TA25: 980 kgf • TA30: 1350 kgf

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, turning length: 210 mm, turning diameter: 26 mm, overall weight: 3,300 kg, rotational speed (max.): 8,000 rpm, total width: 1,300 mm, total length: 2,260 mm, total height: 1,800 mm, Equipment: documentation/manual, Make: Hanwha TechM, Model: XD26H, Year: 09/2011, Fanuc Control, XD Series, 1 high-pressure cooling system with FMB bar feeder Type Turbo 3-26 / 3200 "C", Year 2012 Turning diameter: 26 mm Max. turning length: 210 mm Control: Fanuc Main spindle: Speed: max. 8,000 rpm Sub spindle: Speed: max. 8,000 rpm Djdpfjyhp Ixex Ac Njun Max. part length: approx. 350 mm Tool capacity Number of tools: Up to 20 tools Speed of driven tools: 6,000 rpm Dimensions and weight Machine weight: approx. 3,300 kg (without bar feeder) Dimensions (L x W x H): approx. 2,260 x 1,300 x 1,800 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 6,000 rpm, turning diameter: 16 mm, overall weight: 1,650 kg, Equipment: documentation/manual, CNC Swiss-type automatic lathe with main and sub-spindle and FMB bar feeder. Manufacturer: Star Micronics, model SB-16, type C 480; year of manufacture: 2007; control: Fanuc Series 18i-TB. Max. bar diameter: 16 mm, max. turning length: 205 mm, max. spindle speed: 6,000 rpm, number of axes: 5. Bar length: 3,200 mm, weight: 1,650 kg. Main spindle, sub-spindle, tool positions for side machining, tool positions for back and face machining, live tool stations, parts conveyor for small components. Bar loader: FMB Minimag 18/3200/A; coolant/lubrication system: oil. Dusdpfx Acjyhpvio Njn

Condition: used, turning diameter 340 mm turning length 575 mm control Mazatrol SmoothEZ Djdpewngklsfx Ac Njun max. swing diameter over bed 695 mm Standard machining diameter 235 mm bar material dia. max. 65 mm x-axis 215 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 10 m/min z-axis 605 mm rapid traverse Z-axis 30 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 15 KW 11 KW Max. Torque 167 Nm turning speeds 35 - 6000 U/min spindle nose A2-5 Motor output (40%ED) ca. 7,5 KW Power (continuous operation) 5,5 KW Max. Torque 53 Nm Milling spindle speeds ( driven tools) 20 - 4500 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20 coolant tank 225 l Chuck diameter main spindle 8 '' Chuck diameter counter spindle 6 '' w-axis 585 mm rapid travel W 30 m/min c-axis 555 weight of the machine ca. 4,9 t dimensions of the machine ca. 2,8 x 2 x 1,8 m Special accessories: - Chip conveyor, hinged belt, side ejector - Production package, this package includes Preparation for bar feed Automatic parts catcher (Ø:80mm x L:120mm x 2.5 kg) 15 bar high-pressure coolant system Preparation for chip conveyor (lateral) Signal light (3-colour LED), rectangular C-axis counter spindle 0.0001° Automatic tool eye 8" power chuck Kitag. BR08 & Cyl. SR1566C (HD1) GENERAL MACHINE OPTIONS Air blowing device on the chuck (counter spindle) Transformer for the European market Linear roller guides SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB - Memory Interface (1 slot) CE marking CE marking, metric, 50 Hz Counter spindle positioning 0.0001 degrees without C-axis Tool turret with 12 stations Y-axis control ADDITIONAL PROCESS SOFTWARE Smooth restart function / restart mode Set of manuals in electronic form on CD Main spindle motor AC 15 kW (20 hp) 2nd spindle motor AC 7.5kW (20 hp) Main spindle motor AC 7.5kW MAIN SPINDLE C-axis main spindle Input accuracy (contour/index) 0.0001° Mazak standard colour (F white(fine)/S black) Automatic switch-off via circuit breaker trip Double foot switch Hydraulic pressure interlock RFID door interlock Safety foot switch with locking mechanism Safety measures according to worldwide standard Work area lighting Complete coolant system Automatic opening/closing of chuck jaws (main and counter spindle) Feedback of the chuck status (main and counter spindle) Feedback of the chuck status via sensors. 8" power chuck 6" power chuck (counter spindle) Absolute positioning system Synchronous tapping with milling spindle Relocation Detector NC control Mazatrol SmoothEz 15" colour Lcd (touch screen) User macro (common variables: 600 pairs) EIA/ISO package EIA/ISO - input function EIA/ISO - additional functions Bolt line interpolation 3D tool compensation Workpiece coordinate rotation Geometric function Scaling External data input/output Tapping function (G33) Reverse feed rate G93 G37 Tool length measurement Polar coordinate input (EIA) Optional stop Additional workpiece coordinate systems 300 pieces User macro (600 variables) Mazak tapping/drilling cycle EIA/ISO - input function Scaling External data input/output Thr...

Condition: used, turning diameter max. 360 mm turning length 505 mm control Mazatrol SmoothC Dsdpfjv Dxw Rox Ac Noun max. swing diameter over bed 660 mm swing diameter over slide guides max 255 mm bar material dia. max. 80 mm turning speed range - spindle 35 - 4000 U/min max. torque on the spindle 358 Nm x-axis 225 mm rapid traverse X-axis 30 m/min z-axis 605 mm rapid traverse Z-axis 33 m/min spindle nose A2-8'' spindle bore 91 mm spindle hollow 80 mm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40%ED) kW tailstock quill taper MT 5 Travel- tailstock 565 mm Axial pressure max 5,0 Nm Tool turret 1 Numbers of tools 12 (angetrieben) turning tool - shaft cross cut 25 x 25 mm tool taper BMT Required air-pressure 5 / 160 bar / l/min voltage 400 V coolant tank 180 l engine output 18,5 (30min Betrieb) kW Rated power (100% continuous operation) 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,6 x 2 x 1,8 m Machine incl. the following special accessories: Chip conveyor on the right side Productivity package C - special according to storage machine This package includes: High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min Preparation for chip conveyor (lateral) Automatic tool eye STANDARD ACCESSORIES Transformer for the European market Use of linear systems with guide carriage SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB memory interface (1 slot) Spindle bore 91 mm Set of manuals in electronic form on CD Mazak standard colour CE marking, metric, 50 Hz C-axis input accuracy 0.0001° NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill MK5 SAFETY DEVICES Operator door with interlock switch Double foot switch Hydraulic pressure lock Fully enclosed work area Work area lighting Safety precautions according to global standard COOLANT SUPPLY Grundfos coolant pump type MTA (0.25kW / 7.6L/min) Complete coolant system Automatic switch-off via circuit breaker triggering MESSSYSTEM Absolute positioning system NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation Detector Mazatrol SmoothC 10.4’ colour screen User macro (600 variables) EIA/ISO input function Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN Various tool holders - All dimensions, weights and performance data are non-binding - Used machine without warranty -

Condition: used, Year of construction: 1971, functionality: fully functional, Center distance: 2.000 mm turning diameter: 1.200 mm turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 max. width of the adjustable bed: 900 mm spindle bore: 85 mm turning rate: 14 - 710 U/min Dodpsyhpdysfx Ac Nsun dimensions: 4.705 x 2.060 x 2.000 mm equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning diameter over slide rest: 280 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min Djdpfxjyhpc Ns Ac Nsun diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray several tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Djdpsyhpanjfx Ac Noun Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Condition: excellent (used), CATALOG NUMBER 6901 TECHNICAL DATA Duedpfx Asx Rdgpec Njn - max turning length: 1200 mm - max turning diameter: 210 mm - max turning diameter with standard steady rest: 90 mm - max dimension of square material for turning with automatic feed: 100 mm - 3 hydraulic copy attachments - additional 3 tools on hydraulic pistons (2 pieces installed) - 4 spindle speeds - automatic or manual machine operation - spindle motor power: 9 kW - hydraulic pump motor power: 3 kW - extraction nozzle diameter: 90 mm - transport dimensions (L/W/H): 3700x2100x2000 mm - weight: approx. 3000 kg ADVANTAGES – Italian production – automatic hydraulic copy attachment – original technical documentation (DTR) – not repainted – used lathe, in very good condition Net price: 63,900 PLN Net price: 15,200 EUR Net price calculated at the rate 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: good (used), For Sale CAZENEUVE HB 575 Lathe – 3 Metres Between Centres General Description: Brand: CAZENEUVE (France) Model: HB 575 Type: Heavy-duty / Industrial Lathe Distance between centres: 3,000 mm Applications: Machining of long and cylindrical parts for heavy mechanical engineering, aerospace, energy, manufacturing of large shafts, drums or special components. Technical specifications: Maximum turning diameter: ~575 mm (to be confirmed depending on chuck and tailstock) Maximum length between centres: 3,000 mm Centre height: ~285–300 mm (to be verified on machine) Cross slide travel: ~500–600 mm Chuck: depending on configuration (often 4 or 6 jaws, diameter suited for long parts) WITH 3 STEADY RESTS Duedpfx Acsyhncns Nen BT MACHINES PURCHASE & SALE ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: good (used), Year of construction: 2001, functionality: fully functional, Fanuc control, turret with 6 driven tool stations, tailstock, C-axis, bar feeder. Dujdpfsyhm A Hox Ac Nen