Used Cast Angle Plates for sale (18,811)

Condition: used, Hard stone plate, granite plate, granite block Hard stone block, angle block precisely machined on all sides Measuring cube, measuring plate Length: 1590 mm Width: 300 mm Height: 470 mm - 2 drillings Ø 80 mm - 2 drillings Ø 120 mm - Threaded inserts mainly M16, some with M12 and M18 Net weight: 570 kg Nodpfeg Uar Dex Ah Hswb Good condition

Condition: used, Measuring and scribing plate made of steel/cast iron, heavily ribbed, STIEFELMAYER originating from a measuring machine with manually guided measuring arm high-precision measuring plate with good surface Machine No.: 8530979 Year of manufacture: approx. 1989 Length: 5000 mm Width: 2000 mm Thickness: 350 mm Working height: 690 mm Plate thickness: 50 mm throughout - 15 height-adjustable feet - very precise and stable longitudinal guides, bolted to the side of the plate Space required (L x W x H): 5000 x 2120 x 400 mm Nwjdpfx Asftpl Doh Hsb Weight: approx. 7500 kg good surface

Condition: used, Straightening and welding plate, cast steel / grey cast iron, heavily ribbed Heavy-duty straightening plate Length: 1985 mm Nedpskpwuxofx Ah Hjwb Width: 1000 mm Thickness with ribs: 220 mm Working height: 860 mm Plate thickness: approx. 35 mm throughout - 4 height-adjustable feet Weight: 1050 kg

Condition: used, Alignment and welding plate, cast steel - grey cast iron, heavily ribbed Heavy-duty alignment plate Length: 3050 mm Width: 2000 mm Thickness: 300 mm Plate thickness: approx. 55 mm throughout Nsdpoflt Ecsfx Ah Hjwb Weight: approx. 4.5 tons Good condition

Condition: used, Straightening and welding plate cast steel gray cast iron heavily ribbed Length 2000 mm Width 1200 mm Thickness 150 mm Working height 800 mm Panel thickness 35 mm - Substructure made of solid wood Weight approx. 950 kg Good surface Nwodpfxjdzqq Uo Ah Hsb

Condition: used, Straightening and welding plate made of cast steel and grey cast iron, heavily ribbed former marking-out and measuring plate Nwsdsu Swb Ijpfx Ah Hsb heavy-duty straightening plate Length 2000 mm Width 1000 mm Thickness 260 mm Working height approx. 850 mm Plate thickness approx. 40 mm throughout - 5 pieces height-adjustable feet Weight with feet 1250 kg good condition

Condition: used, Steel and cast iron straightening and welding plate, heavily ribbed heavy-duty straightening plate Length 1600 mm Width 1005 mm Thickness 280 mm Plate thickness approx. 85 mm throughout Nwedpsdzqbajfx Ah Heb - Center hole Ø 245 mm, 400/800 mm - Threaded holes M 20, approx. 55 mm deep - Through holes Ø 27 mm Weight approx. 2.5 t Good condition Former press table – presumably machined parallel on both sides

Condition: used, SIEGFRIED WEYRAUCH Gemmingen straightening and welding plate Heavy ribbed cast steel/grey cast iron Former marking and measuring plate Heavy-duty straightening plate Nwsdsd N H Dbjpfx Ah Hsb Length: 1000 mm Width: 800 mm Thickness: 28/125 mm Working height: approx. 850 mm - Feet with leveling screws for plate alignment Weight: 370 kg Good surface condition

Condition: used, Steel cast and grey cast iron straightening and welding plate, heavily ribbed Heavy-duty straightening plate Length: 1600 mm Width: 1000 mm Thickness: 210 mm Plate thickness: approx. 32 mm throughout Table height / working height: 565 mm - Very stable steel table base (custom-made) - Plate with base movable by pallet truck Weight: 740 kg Good condition Nwodpsqvq Ucefx Ah Hob

Condition: good (used), Year of construction: 2004, Number of T slots: 8 + 3 Jump from T to T: 280mm T size: 22mm Number of matching pieces:5 Length: 1250mm Width: 750mm Height: 2500mm Weight: 2900kg Nwodpfxswu D Afo Ah Heb

Condition: used, diameter 400 mm passage / inner diameter 100 mm 4 individually adjustable clamping jaws mounting short taper DIN55022 size 6 taper diameter 106 mm bolt circle of the 4 fixing screws 133.4 mm height approx. 100 mm height of the jaws 58 mm screw size M12 weight approx. 69 kg Nwedpfx Ahjvimuuj Hjb

Condition: used, Cast iron marble plate on feet Nsdpfx Ahew Emp Aj Howb Length: 1200 mm Width: 1200 mm Height on feet: 780 mm Weight: approx 1,5 T

Condition: used, Steel floor plates Nwjdpfx Aoxxqypjh Heb Length: 2210 mm Width: 1500 mm Thickness: 260 mm With T-slots in both directions Weight: approx 2 T 3 same plates available.

Condition: ready for operation (used), Length: 4000mm Nwodpjx Tpvnefx Ah Heb Width: 1880mm Height: 400mm 4 pieces

Condition: good (used), Cast iron marbles Length: 3970 mm Width: 2060 mm Useful surface (L x W x H): 3910 x 2000 x 350 mm Delivered with 6 levelling feet Weight: 7 T Nsdpfxeh Awqgj Ah Hjwb 2 same plates available.

Condition: good (used), Year of construction: 1990, overall weight: 1,200 kg, Faceplate, Werner Gigant, Type: PL 1600 - Cast Iron, Without Jaws Diameter 1600 mm with transport frame. Weight approx. 1200 kg. See photos for details. Good condition. Nwedpewaidfsfx Ah Hsb

Condition: new, Year of construction: 2026, Extremely strong industrial magnet for iron separation Special price 970 € net (shipping 14,90 € net) *the lengths can be seen in picture 2 The active side has a stainless steel end plate (material 1.4301). There are threaded holes on the back for mounting *handle available on request The block magnet systems can be used up to a maximum operating temperature of + 100 °C. The magnet surface should be regularly cleaned of any trapped iron parts. Starting heights for all types e.g. For a steel nut M5 approx. 60 mm For an M5 x 30 screw approx. 100 mm Installation example 1: Mounted above a conveyor belt, the iron parts "jump to the holding surface of the magnet". Installation example 2: Nodpfx Astqfhxsh Hswb Mounted in a piping system with direct contact to the material flow. For a high level of separation safety, it is possible to install several block magnets in a cascade, one behind the other. Installation and safety instructions: When handling, unpacking and then installing, make sure that there are no loose iron parts such as tools or screws in the vicinity. The magnetic attraction is so strong that painful injuries can occur if fingers come between iron parts and the active surface. There should be no steel parts within a minimum distance of 400 mm below the active surface.

Condition: used, Year of construction: 1974, length 450 mm Nsdpfxeydqnxe Ah Hswb width 250 mm height 1.250 mm accuracy +/- 1 ° distance between tapping holes H: 130 mm distance between tapping holes V: 150 mm distance between tapping holes H: 70 mm distance between tapping holes V: 200 mm JOHANN FISCHER - Measuring Angle

Condition: used, functionality: fully functional, actuation type: hydraulic, roller (top) diameter: 420 mm, sheet thickness (max.): 25 mm, Hydraulic cylinder Brand: Casanova Bending length: 3,100 mm Maximum bending thickness: 25 mm Top roller diameter: 420 mm The side rollers are raised parallel, without inclination. New control and command panel, installed and modified in 2003. Equipped with hydraulic flag and hydraulic side table. Nodpoydk D Hofx Ah Howb Pit dimensions: - 200x6800 mm - 555 mm depth

Condition: used, functionality: fully functional, Year of construction: 1998, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 380 mm, side roll diameter: 340 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 900 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, overall weight: 15,000 kg, total length: 5,500 mm, total width: 1,500 mm, total height: 1,600 mm, power: 22 kW (29.91 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: centralized greasing system, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, Plate roll FW model HAV 3100X16-30 variable geometry 3-roll plate bending machine capacity 3000 x 30 mm Year of make 1998 Used machine in working condition Top roll 380 mm Side rolls 340 mm Rolls surface length 3100 mm Capacity bending Plate width 3000 mm Plate thickness 30 mm Prebend 16 mm minimum rolling diameter starting from ID 450 mm and above -configuration -machine fully hydraulic operated -variable geometry of the 3 rolls with pinch prebend -hardened surface of the 3 rolls Rerolling system for calibration of welded plates Front open drop-end to unload the closed shell -Side arm hydraulic swing-down to align the plate in the rolls -hydraulic driven rotation of the upper roll with braking system Control console centralized electric with digital position readout Electric motor power 22Kw installed on hydraulic unit Voltage 3 phase 380/50 Nwsdpfx Ahoydiq So Hob Safety and emergency stop installed Manuals operation and service original the machine Machine weight 15ton overall dimension cm 550 x 150 x H160 cm

Condition: excellent (used), For sale: Professional turning and finishing holder with SK40 mounting, ideal for facing, finishing, and rough machining of end and flat surfaces. The high-quality tool steel construction ensures stability, rigidity, and high clamping precision. 📌 Technical data: • Type: Turning and finishing holder with insert • Mounting: SK40 DIN 69871 B • Dimensions: SK40 × 40 × 40 • Head diameter: Ø40 mm • Total length: approx. 60 mm Njdpsxizb Eefx Ah Hjwb • Condition: Used, very good technical condition – fully functional ✅ Advantages: • High machining accuracy and clamping rigidity • Suitable for use with indexable inserts • Designed for facing, finishing, and rough machining • Compatible with milling machines and machining centers with SK40 mounting

Condition: excellent (used), CATALOG NUMBER 7854 Technical data: - belt length: 2515x152 mm - belt width: 150 mm - oscillation - vertical oscillation movement - sanding length: 790 mm - table size: 840x300 mm - worktable for contoured elements: 300x250 mm - worktable adjustment: 80 mm - motor: 2.2 kW Nwedox Ngt Nspfx Ah Heb - sanding unit adjustable angle: 90-45 degrees - sanding head adjustment: 0-45 degrees - extraction port diameter: 100 mm - dimensions (length/width/height): 1450/600/1230 mm - weight: 138 kg ADVANTAGES – with oscillation – with shoe – suitable for contour and straight sanding – unit can operate vertically and horizontally – unpainted – used sander, very good condition Net price: 3,900 PLN Net price: 930 EUR (depending on the 4.2 EUR rate) (Prices may change with higher fluctuations)

Condition: new, Year of construction: 2024, neu 2024 9722 prompt, Zwischenverkauf v Türkei 16600 € 318.72 € 1 2050 mm 3 mm 130 mm 3,5 m/min 2.2 kW 3200 mm 750 mm 1000 mm 1500 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor HARDENED ROLLS Njdpswiqpbsfx Ah Howb manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in GERMAN OPTIONS: (time of delivery with options approx. 8 weeks) Motorised Back Roll (Power Rear Roll) Digital Read-Out

Condition: excellent (used), Working height: 100 mm Flat steel: 100 x 10 or 80 x 12 or 30 x 20 mm Square steel: 22 mm Round steel: 25 mm Nwsdpsydbfhsfx Ah Heb Angle steel: 100 x 10 mm Aluminum flat bars: 100 x 30 mm Required space: 500 x 600 mm

Condition: used, Used Sondex model SF229-IS stainless steel plate heat exchanger. Transmission surface approximately 360 m2. Hot side is rated min/max allowable pressure -1/10 bar at min/max allowable temperature -20/165°C. Cold side is rated min/max allowable pressure -1/10 bar at min/max allowable temperature -20/165°C. Nedoyc Tqmspfx Ah Hjwb