Used Calibration Ball for sale (4,194)

Condition: used, mileage: 130,000 km, power: 240 kW (326.31 HP), first registration: 03/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,350 mm, loading space width: 2,480 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, tail-lift, We are delighted that our offering has captured your interest and we can already assure you that you will be able to purchase a high-quality, competitively-priced vehicle with a verifiable service history from us! MB ANTOS 2533 with certified swap body (curtainsider with swinging wall system) BÄR tail lift, 2,000 kg Trailer coupling, tow jaw Trailer coupling, ball head Steering rear axle Air conditioning Navigation system Full air suspension Front axle air-suspended • Front axle rated at 8.0 t • Rear trailing axle, 7.5 t, steered, liftable • Wheelbase 4600 mm • Comfort driver's air seat • Comfort passenger's air seat • Air conditioning • Raised storage compartment on engine tunnel • Roof hatch/ventilation flap • M cab ClassicSpace, 2.30 m wide, 320 mm tunnel • M cab • Floor variant, 320 mm tunnel Hfodpfx Aisy Ng N Deten • Cab width 2.30 m • ClassicSpace • Roof spoiler without base trim, lockable • External sun visor, transparent • Central locking system • Comfort locking system • 'Economy' drive mode • Transmission G 211-12/14.93-1.0 • Tubeless tires, 315/60 R 22.5 FA/Trailing/Steering axle • Tubeless tires, 315/60 R 22.5 RA • Air suspension, rear axle, low-frame • Fuel tank 290 L, left side, 650 x 565 x 950 mm, aluminum • Engine specification Euro VI, with OBD-C • High Performance Engine Brake • Standard trailer coupling, D40, Rockinger • Electronic Stability Control (ESC) • Anti-roll control assist • Lane keeping assist • Attention assist • Active Brake Assist • Speed limiter 90 km/h / 56 mph, ECE compliant • Cruise control • Antos series GERMAN VEHICLE REGISTRATION / EXPORT SERVICES We organize your registration and export documents / EUR 1 and manufacturer declaration for export. FINANCING Upon request, we are happy to provide you with a leasing, hire purchase or financing quote. SERVICE TÜV inspection / UVV LBW / LGS inspection / Tachograph inspection / OBU device installation and service carried out by our authorized workshop on site. TOLL / ROAD CHARGES Toll booking available on site. TRAVEL / DISTANCES Wittlich train station: 500 m Frankfurt Airport: 150 km Frankfurt-Hahn Airport: 40 km Luxembourg Airport: 75 km Sale in accordance with our terms and conditions. Information provided online is a non-binding description and does not represent guaranteed specifications. The seller is not liable for typing or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Thermal compensation at +20°C: 3000 W Thermal compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW, Rated current: 21 A Hjdpfxjzg Tpie Aitjfn Sound level at 1m distance (free-field measurement): < 69dB (A) Side access port: 5.5 cm / 12.5 cm The chamber is water-cooled. Refrigerant: R-404A and R23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: new, Features: 5-axis electronic control overhead control panel, rotatable electronic adjustment for scoring unit automatic rip fence with movement on screw and ball pushing linear guide start / stop pushbuttons integrated in the carriage “Quick Lock” squaring fence sliding carriage with 'arc' profile - 10 years warranty telescopic swing arm made of large dimensioned extrusion and linear guide on recirculating ball bearings Technical Data: Hodpfx Ascrnm Noitefn saw blade DM mm 550 scoring unit blade DM mm 120 squaring capacity mm 3200x3200 tiltig capacity deg. 0 +46 max. cutting height at 90° mm 200 max. cutting height at +45° mm 130 saw blade speed RPM 2500, 3500, 5000 scoring unit blade speed RPM 8500 DM suction connections mm 120 & 100 main motor Hz 50 kW 7,0 scoring unit motor Hz 50 kW 1,3 cutting capacity right side mm 1500 incl. following options: 570335 "Pro-Lock" system for quick changing of main saw blade without tools

Condition: new, Saw unit swivels 46 ° on both sides. Programmable, electric saw blade adjustment Control unit with electronic display for saw blade tilt and lift Torsional rigidity and vibration-free working Easier plate feeding due to large trimming frame with roller Telescopic ruler with 2 professional folding stops Excellent cutting precision scoring unit equipped with its own motor - easily adjustable from the outside saw blade diameter of 400 mm scoring saw blade with a diameter of 160 mm 2-position saw blade pendulum protection manell adjustable 3-axis controlled Motorized rip fence with electronic positioning includes: Position display via an encoder Adjustment via ball screw Stepless adjustment via switch or automatic positioning system Cutting width 1270 mm Programmed movement of motorized adjustment and tilting for saw unit UP version with swivelling control panel for maximum flexibility X version with Compex miter fence for quick and accurate execution of miter cuts with automatic compensation of the stop position. (Length compensation) incl. options: - cutting lenght 3200 mm - on / off buttons for main motor and scoring unit integrated in saw carriage - CompeX frame - Version "READY 3 UP" - 2 saw speeds (3500/5000 U/min) Max. cutting width with rip fence 1270 mm Format cuts 3200 mm main motor 7,0 kW, 400 V, 50 Hz Saw blade angle -46 - 46 ° Hsdpfed Akygex Aitofn Max. cutting height 90° 136 mm Max. cutting height 45° 97 mm Max. cutting height -45° 60 mm saw blade diameter 400 mm Diameter scoring saw blade 160 mm (Main) saw blade speed 4000 min¯¹ Dust extraction ports 120 & 80 mm

Condition: excellent (used), total width: 500 mm, total height: 280 mm, conveying length: 3,000 mm, working height: 280 mm, load capacity: 1,000 kg, Price for: 1 unit of roller conveyors (total length 3m) = 75 EUR plus VAT For larger quantities, price on request. Roller conveyors for the furniture industry, WTT Fördertechnik, Type 121 Total of 750 units of complete roller conveyors, each 3m long (total of 2250 running meters) Detailed description: Roller conveyor length L = 3000 mm Installation length IL = 500 mm Load roller spacing T = 200 mm Roller conveyor height H = 280 mm +/- 25 mm adjustable Number of feet FA = 1 unit per running meter Load capacity approx. 1000 kg 1 unit consists of: 1. 2 units of side rails, each 3000 mm long, made of profile 20/80/40/3 mm, with a pitch of 25 mm, perforations suitable for a 12 mm diameter axle, powder-coated in RAL 6011 green. 2. Insertable load rollers, 15 units Series 4.5.80.1.12.1.5.00 Steel tube - 80 x 2.0 mm wall thickness Axle - 12 mm spring axle Bearing – steel insert with reinforced, pressed special ball bearings. Hedpfx Aiewwmkdstofn Surface of the load rollers is steel, uncoated. Installation length IL = 500 mm 3. 3 units of screw-on bridge support feet in a stable, welded construction made of special profile with a cross brace, adjustable in height by +/- 25 mm via a threaded spindle M16 with a screw slot. With floor mounting plates and dowel holes. Powder-coated in RAL 3000 red. Weight – 2.5 kg (Subject to changes and errors in the technical data, as well as prior sale)

Condition: used, Heraeus Vötsch Hfodjzg Tp Njpfx Aitsn Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Thermal compensation at +20°C: 3000 W Thermal compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB (A) Side access port: 5.5 cm / 12.5 cm The chamber is water-cooled. Refrigerant: R-404A and R23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: new, mileage: 500 km, power: 152 kW (206.66 HP), color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, central locking, power assisted steering, - Mr. Rudolph is happy to assist you by phone at: Front axle suspension: Quad-Tor torsion bar suspension, axle configuration: 2 axles, rear-wheel drive, left-hand drive, engine: 3.0 l D EVIe 152 kW (207 hp), transmission: HI-MATIC 8-speed automatic gearbox, permissible gross mass Daily 7.0 t / 7.2 t, rear axle leaf suspension, rear axle with twin tires, vehicle version: crew cab 6+1, wheelbase 4350 mm, standard specification, seat belts with warning signal for driver and passenger, standard seat belt color, belt tensioner passenger side, fabric seat covers, 4G connectivity box incl. TCO service contract, digital VIN code, daytime running lights, digital EC tachograph 4.1, light and rain sensor, manual high beam control, bodybuilder interface, mirrors for 2350 mm body width, rear parking sensors, standard Daily identification, wide wheel arch lining, rear blind spot radar, fuel filler neck in B-pillar, lane departure warning (LDWS), vehicle badge standard, tire pressure monitoring system (TPMS), forward monitoring (MOIS), side vehicle designation, standard paint finish, MY 2024, standard rear lights, electrically adjustable and heated exterior mirrors, cab width 2000 mm, driver fatigue warning system (Driver Drowsiness Attention Warning), warning triangle, version and dimensions according to ECE-27 guideline, central locking with remote control, grab handle on A-pillar, COC EU type approval, 2 wheel chocks, traffic sign recognition with intelligent speed assist (ISA), warning beacon, electric window lifters for front doors, left-hand drive for right-hand traffic, front airbags for driver and passenger with belt tensioners, first aid kit, pre-installation for alcohol interlock, speed limiter 90 km/h, spare wheel mount at rear end of frame, AdBlue tank 20 liters under cab, weight variant 2500/5350 kg, spare wheel, dimension corresponding to chassis tires, rear trapezoidal spring, rear underrun protection, steel rims, integrated 90 l fuel tank, C-profile steel ladder frame, tires 225/75 R16, standard suspension front axle, homologation for standard freight transport vehicles, standard data set, exhaust tailpipe centrally under vehicle, standard oil pan, aluminum radiator, rear axle ratio i 4.30, emissions standard EURO VI E, heated crankcase ventilation, standard starting strategy, parking brake control for remote ignition, engine speed 3500 rpm, diesel particulate filter, standard fuel, heated fuel filter, automatic torque converter transmission HI-MATIC 8HP, comfort noise insulation, side marker lights supplied loose, no bench seat in passenger compartment, luxury seat for passenger with armrest and lumbar support, adjustable in height, tilt and length, hydraulically suspended, heated, additional speed limiter, switch for body lighting, battery 12 V 105 Ah/950 A, 12 V 13-pin trailer socket, cab rear wall with window, recommended for certain body types to monitor rear traffic, additional vehicle key with remote control, storage box next to driver’s seat with USB port, roof shelf above windscreen, pre-installation for toll system (OBU), includes antenna and wiring on dashboard without receiving device, trailer load 3.5 t, ball head trailer hitch, electric parking brake, standard GVWR, alternator 3500 watts (14 volts x 250 amperes),... Hjdpfx Aieyklwuotjfn

Condition: used, PRIMO - 1100 - E – For Sale Swiss quality product CONSTANT TABLE MACHINE / with automatic head positioning Wide-belt calibrating and fine-finishing machine Combination unit: contact roller and sanding pad unit with electronically controlled segmented sanding shoe Belt drive motor power 9 kW Contact roller pressure continuously adjustable according to grit scale Infeed table with roller support Working width 1100 mm Feed rate 3 - 15 m/min, continuously adjustable Automatic workpiece thickness setting ENORMATIC quick adjustment Machine is WORKSHOP OVERHAULED and in TOP CONDITION / from a craft business Hfsdpfx Asz Sn Snoitsn Available from stock in Lieboch

Condition: used, Keysight Mixed Signal Oscilloscope / Digital Storage Oscilloscope Keysight / Agilent InfiniiVision MSO-X 3034A 350 MHz Mixed Signal Oscilloscope with 4 analog channels, 16 digital channels, and 4 GSa/s sampling rate For sale is a used Mixed Signal Oscilloscope from the manufacturer Keysight Technologies / Agilent Technologies. The device is suitable for precise signal and measurement tasks in development, laboratories, service, training, research, as well as industrial electronics and quality assurance. Technical data Manufacturer: Keysight Technologies / Agilent Technologies Type: MSO-X 3034A Series: InfiniiVision Device type: Mixed Signal Oscilloscope / Digital Storage Oscilloscope Bandwidth: 350 MHz Analog channels: 4 Digital channels: 16 Max. sampling rate: 4 GSa/s Display: Color display MegaZoom technology Inputs: 4x analog BNC inputs Digital input / Logic connector USB port USB Device / USB Host Trigger Out Ext. Trigger / Calibration connector Power connection: 100 - 240 V AC 50 / 60 Hz Power consumption: max. 100 W Dimensions: approx. 381 × 204 × 142 mm Weight: approx. 4 kg Features Large color display Front-panel control buttons 4 analog channels 16 digital channels USB interfaces Trigger functions Analysis functions Measurement functions Storage and printing functions Carrying handle Accessories as shown in the pictures Application areas Electronics development Laboratory Service Troubleshooting Signal testing Printed circuit board testing Training Research and development Quality assurance Industrial electronics Scope of delivery Keysight / Agilent InfiniiVision MSO-X 3034A 3x probes as shown in the pictures Power cable Accessories as shown in the pictures Hodpfozh I Dwjx Aitsfn Condition Used Optical condition as shown in the pictures Device can be switched on Display and operation appear to be functioning properly Test seals / stickers as shown in the pictures are present Weight: approx. 4 kg The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN, Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick/Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from an industrial setting and has been professionally operated. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated force: 10 kN Type of test: Tensile and compression test Technical Performance Data: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnenn (nominal speed) Displacement resolution: 0.038 µm Positioning repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Data transfer to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Working space width: 440 mm Working space height (bottom): 1,050 mm Weight with typical components: approx. 160 kg Electrical Data: Adjustable mains voltage: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current consumption at 230 V: approx. 3.4 A Fuse rating: ≤ 16 A Connection: 1L / PE / N Documented test and calibration records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Temperature during testing: 23.3 °C Displacement measurement system: Incremental encoder (rotary) Force sensor installed 29.01.2014 Force sensor: Xforce HP Module: DCSC Calibration at Zwick Ulm 28.08.2013 Force sensor: Xforce P Module: DCSC Rotation before test series: 120° testXpert control system Documented service and calibration records are available. Hfedpfszizrkjx Aiton Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measuring module Force sensor Xforce P / Xforce HP Incremental encoder (rotary displacement measurement system) ISO 7500-1 compliant force measurement Installed under the traverse Important Note: “The table shown in the photos is not part of the sale.” Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force sensor DCSC module Specimens / Grips Adapters and holders Tools Documentation folder with documents Scope of delivery as shown in the pictures. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Testing Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB (A) Hfjdpfx Aijzd R Tgstjn Side access port: 5.5 cm / 12.5 cm The chamber is water-cooled. Refrigerant: R 452A and R 23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with refrigerants that comply with legal requirements 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), For sale: Professional Fischer DUALSCOPE DMP40 coating thickness gauge designed for non-destructive measurement of metallic and non-metallic coatings on various substrates such as steel, iron, aluminum, and other non-ferrous metals. • Condition: Very good, fully functional and ready for operation • Current PCA calibration certificate dated 05.11.2023 • Complete set in original case including probe, cables, calibration foils, adapter, manual, and certificate Specifications and benefits • Automatic substrate recognition (FE/NFE) and selection of the appropriate measurement method • Wide measuring range and high measurement precision • Color display with intuitive navigation menu in Polish • Functions for statistics, results recording, and data export • Non-destructive measurement – ideal for production quality control and laboratory testing • Compliance with ISO, ASTM, and DIN standards • Robust industrial housing suitable for both field and laboratory use The set includes • Fischer DUALSCOPE DMP40 gauge • Measurement probe • Measurement cables • Calibration foils • Measurement adapter • Original transport case • Fischer lanyard • User manual and PCA certificate Applications • Coating quality control in electroplating, painting, and automotive industries • Industrial production and research laboratories • Service measurements and technical inspections Hodpfx Ajz Slg Roitefn

Condition: used, Heraeus Type: HT 7012 S2 Heraeus Shock Test Chamber Temperature Shock Test Cabinet, Water-Cooled Two-Chamber Design Warm Chamber: The temperature control for the warm chamber ranges from +50°C to +220°C. Temporal temperature deviation in the center of the usable space: ± 1 K. Spatial temperature deviation: ± 2 K. Temperature change rate: Heating: 11 K/min. Cold Chamber: The temperature control for the cold chamber ranges from -65°C to +70°C. Temporal temperature deviation in the center of the usable space: ± 1 K. Spatial temperature deviation: ± 2 K. Temperature change rate: Heating: 2 K/min. Cooling: 3 K/min. Test chamber volume: 125 liters. Temperature range, warm chamber: +50°C to +220°C. Temperature range, cold chamber: -80°C to +70°C. Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm. External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm. Rated power: 10 kW. Rated current: 25 A. Voltage: 3/N/PE AC 400 V +6/-10% 50 Hz. Refrigerant: R404A / R23. Weight: 1000 kg. For your safety as a buyer, please note the following information: Hjdjzd R Azepfx Aitefn The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components. 2. Refilling with refrigerants that comply with legal regulations. 3. Leak test with certificate. 4. After successful inspection, the chambers will undergo a test run, which is monitored with calibrated devices. Condition: used. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Techman Type: Techman Robot TM5-900 The TM5-900 is equipped with an integrated image analysis system, which gives it the ability to "see," allowing it to handle assembly automation and inspection tasks with maximum flexibility. It works in collaboration with humans, sharing the same tasks without compromising productivity or safety. It offers the highest level of precision and efficiency while operating in the same workspace. The TM5-900 is the ideal cobot for the electronics, automotive, and food industries. Payload: 4 kg Reach: 946 mm Weight: 22.6 kg Perfect for Industry 4.0 Highest flexibility and adaptability Extremely low costs for automation and maintenance The TM5-900 is a true plug & play solution. Connect a monitor, mouse, and keyboard to the control unit, and the TM5-900 will be ready for use in just a few steps. Scope of delivery: Techman Robot TM5-900 Control unit, connection cable Operating device 2 calibration plates for the camera system 1 landmark Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone. Hfedszg Eyaspfx Aitjn

Condition: used, Weiss   Type: WK3 600/0-M   Weiss Climate Test Chamber, Water-Cooled Type series WK3-../0 with SIMPAC* control system   Test chamber volume: approx. 600 liters   Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm   Data for operation:   Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Fuse (on customer's side): 16 A, slow-blow Protection class, control cabinet and operating panel: IP 54 Max. heat dissipation to environment: 1200 W   Sound pressure level approx. measured at a distance of 1 m from the front, 1.6 m high: 46 dB(A)   Data for temperature tests: Temperature range: -5°C to +90°C   Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1 K   Temperature gradient (according to IEC 60068-3-5) Temperature change rate Heating: 0.6 K/min Cooling: 0.3 K/min   Heat compensation at +20 °C to +50 °C: 200 W   Data for climate tests:   Temperature range: +10°C to +90°C Dew point range: 4 to +89.5 °C Humidity range: 10 to 98 % RH Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.3 K Temperature deviation spatially: ± 0.5 to ± 1 K Humidity deviation over time: +1 to +3 % RH   Refrigerant: R-404A Hsdpsziywrsfx Aitjfn   Weight: 610 kg   For your security as a buyer, please note the following information!   The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers will be subjected to a test run, which will be monitored with calibrated equipment.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, ZEISS Multisensory CNC Coordinate Measuring Machine O-INSPECT 442 Professional coordinate measuring machine for optical and tactile precision measurements in industry, research, and quality assurance. For sale is a used multisensory coordinate measuring machine from the manufacturer Carl Zeiss IMT GmbH. The ZEISS O-INSPECT 442 combines highly precise optical and tactile measurement technology in a CNC coordinate measuring machine. The installed ZEISS CALYPSO measurement software enables convenient evaluation of measurement data as well as the display of the actual state, target profile, and deviations. The system is ideal for quality assurance, toolmaking, precision engineering, medical technology, as well as research and development. Technical data: Manufacturer: Carl Zeiss IMT GmbH Model: O-INSPECT 442 Type: Coordinate measuring machine Measuring range X: 400 mm Measuring range Y: 400 mm Measuring range Z: 200 mm Max. workpiece weight: 20 kg Noise level: < 70 dBA Measurement system: Multisensory measurement system Optical and tactile measurement CFS measuring head system CALYPSO measurement software CNC-controlled measurement sequences Electrical data: Supply voltage: 100 / 110 / 120 / 125 / 230 / 240 V AC (±10 %) Current type: 1 / N / PE Frequency: 50–60 Hz (±3.5 %) Power consumption: max. 1500 VA Dimensions: Width: 1,055 mm Depth: 1,351 mm Height: 1,770 mm Weight: Hsdpfx Aozii Dhoitefn Coordinate measuring machine: approx. 800 kg Max. workpiece weight: 20 kg Equipment: Integrated control Control panel Computer with peripherals ZEISS CALYPSO Software 5.2 Documentation CFS measuring head system Reference probe Calibration standard Calibration template Applications: Coordinate measuring technology Optical measuring technology Tactile measuring technology Quality assurance Toolmaking Precision engineering Medical technology Research and development Scope of delivery: ZEISS O-INSPECT 442 coordinate measuring machine Integrated control Control panel Computer with peripherals ZEISS CALYPSO Software 5.2 Documentation Measuring head system Reference probe Calibration standard Calibration template Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos or other items not explicitly mentioned are not included in the sale. Due to its size and weight, shipping is possible via a freight forwarder. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Hsdpfx Aexqggceitofn Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: new, Multi-function machine with aluminum sliding table for sawing, milling, planing/thicknessing, and optional long-hole drilling. torsion-resistant, steel-cast iron construction machine table made of cast iron, hardened and ground smooth-running, anodized aluminum sliding table, 10-year SCM warranty on wear of the slide guides large fence system with extendable aluminum telescopic stop and folding stops with combination saw-tenon stop with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, swiveling from 90°-45° helical steel infeed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit sliding table with ball contact system equipped with a ball contact system that has proven its worth millions of times permanently smooth running due to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and trapezoidal rail The dust extraction ports for the planer and thicknesser are on the same – right – side. The dust extraction hose can therefore be used for both types of planers from the same side. helical steel infeed rollers for a constant and even workpiece feed massive anti-recoil guards for the operator's safety 3-knife cutterhead ensures an optimal planing result Fencing length 1600 mm max. saw blade diameter with scoring unit 315 mm max. cutting height at 90° / 45° 100/79 mm max. crosscut width to the left of the saw blade 1660 mm cutting width on the parallel stop 800 mm saw blade speed 3500 rpm saw blade tilt 90° - 45° Working width 300 mm planer table length 1260 mm planer shaft diameter / number of planing knives 72 mm / 3 pcs. Hedpfxjiiyppe Aitjfn Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm feed rate 7 m/min Milling spindle diameter 30 mm Useful length of milling spindle 100 mm max. tool diameter 180 mm, can be countersunk Spindle speed 3500/600/800 rpm Motor power 3 x 4 kW, 400 V, 50 Hz Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Weight 430 kg OPTIONS: - Professional stops EUR 300.— Saw stop with quick-release lock and micrometric adjustment Planer stop with 90° ÷ 45° with continuous adjustment - Scoring unit incl. saw blade EUR 292.— - Handwheel with numerical display for thickness table positioning EUR 129.— - Feed device EUR 119.— - 2 additional handwheels for unit adjustment EUR 45.— - TERSA cutterhead DM 72 mm EUR 212.— - Xylent spiral cutterhead with 3 rows of knives EUR 717.— - Aluminum long-hole drilling device EUR 390.— - 2 stop flaps on the crosscut fence EUR 150.—

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Hfsdpfxeudxche Aiten Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: refurbished (used), Year of construction: 2005, travel distance X-axis: 1,050 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,000 mm, workpiece weight (max.): 20,000 kg, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 2,520 mm, workpiece width (max.): 1,520 mm, workpiece height (max.): 945 mm, feed rate Z-axis: 12 m/min, overall weight: 30,000 kg, table load: 20,000 kg, # OPS INGERSOLL GANTRY 1500 / 64 Bit ## Fully Refurbished – Completion Expected 10/2026 For sale is an OPS INGERSOLL wire EDM machine, model GANTRY 1500 / 64 Bit, manufactured in 2005, which is undergoing a comprehensive and professional overhaul in our facility. Upon completion of the overhaul, the machine will be in very good condition, both technically and aesthetically, and will be prepared for immediate use in reliable production operations. ### Technical Data Manufacturer: OPS INGERSOLL Model: GANTRY 1500 / 64 Bit Year of Manufacture: 2005 Condition: Fully Refurbished Hfjdpfx Aioz Atdrsten Completion: Expected 10/2026 Control: Mitsubishi – 64-bit CNC Generator Power: 70 A – Multipulse Travel Ranges X / Y / Z: 1,050 × 2,000 × 1,000 mm Electrode Changer: 15-position pick-up disc changer Working Tank (W × D × H): 1,520 × 2,520 × 945 mm Workpiece Clamping Table (W × D): 1,380 × 2,380 mm Load Capacity: 20,000 kg ### Accessories * CO₂ fire extinguishing system * Cartridge filter system ## Extensive Overhaul The OPS INGERSOLL GANTRY 1500 is undergoing a comprehensive and professional overhaul in our facility. During the overhaul, the machine will be disassembled to over 70%. All relevant components and wear parts will be carefully inspected and, if necessary, professionally refurbished or replaced. ### The following overhaul work will be carried out: * Inspection and, if necessary, replacement of the ball screws and ball bearings of the X, Y, and Z axes * Inspection and, if necessary, replacement of all four ball screws of the tank drive * Inspection and testing of the C-axis for tightness and accuracy * Geometric inspection of all axes according to the OPS INGERSOLL test protocol * Thorough cleaning of the entire machine base * Cleaning of the entire working tank, including replacement of the felt wipers * Overhaul of the dielectric pumps * Replacement of all hydraulic and dielectric lines * Replacement of all pneumatic lines * Thorough cleaning of the control cabinet, generator, and control system * Replacement of all relevant fans and batteries * Overhaul or, if necessary, replacement of power supplies, units, and servo amplifiers * Final laser measurement of the machine after the overhaul ## Quality Control and Erosion Test After completion of all overhaul work, the machine will undergo a comprehensive functional and quality control. This includes, in particular, a detailed erosion test according to the quality and testing specifications of OPS INGERSOLL. The relevant machine functions, as well as accuracy and process reliability, will be checked. ## Ready for Production After Overhaul After successful completion of the overhaul and final inspection, the OPS INGERSOLL GANTRY 1500 / 64 Bit is immediately ready for use. With its high load capacity of 20,000 kg, the generous travel ranges, and the large working area, the machine is particularly suitable for the reliable machining of large and heavy workpieces in demanding production environments. A powerful and comprehensively refurbished wire EDM machine for users who value high machine quality, process reliability, and long-term operational capability. 10/16.

Condition: used, mileage: 63,200 km, power: 120 kW (163.15 HP), color: silver, gearing type: automatic, number of seats: 8, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: CF0 Basic chassis, CL1 Adjustable steering wheel for inclination and height, CL3 Leather steering wheel, CL4 Multifunction steering wheel with trip computer, CM2 Bumpers and attachments painted in vehicle color, CU1 Underbody cladding, aerodynamic, D12 Roof rails, E07 Hill-start assist, E34 Buffer battery for starting, ED4 Fleece battery 12 V 92 Ah, EL9 2-way speakers front and rear, EN6 Audio 10, ES3 12V sockets for rear passenger seats, right and left, EZ7 Active parking assist, F64 Exterior mirrors electrically foldable, F66 Lockable glove compartment, F68 Heated and electrically adjustable exterior mirrors, F72 Exterior and interior mirrors with automatic dimming, FP2 Mirror package Vito, FZ8 Comfort opening and closing with IR remote control, G43 9G-TRONIC, H00 Warm air duct to passenger compartment, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, HZ7 Climate control semi-automatically regulated, TEMPMATIC in the rear, IN2 Wheelbase 3200 mm, long overhang, J55 Seat belt warning system for passenger seat, JA1 Warning light for windshield washer fluid level, JF1 Rain sensor, JH3 Communication module (LTE) for digital services, JK3 Instrument cluster with pixel matrix display, JW8 ATTENTION ASSIST, JX2 Service interval 40,000 km, KB6 Main tank 57 liters, LA2 Driving light assistant, LC4 Comfort roof control panel, LC8 Ambient lighting tailgate, LD9 Interior lights in the rear, LE1 Adaptive brake light, MJ8 ECO Start-Stop function, MS1 TEMPOMAT, MT0 Emission class Euro 6d-TEMP M/N1 GR. II, MU4 OM 654 DE 20 LA 120 kW (163 hp) 3800/min, MX0 BlueEFFICIENCY package, Q22 Trailer coupling ball head fixed, QA4 Trailer load 2500 kg, R1N Light alloy wheels 7.0Jx17 5-twin-spoke design, RY2 Tire pressure monitoring system on front and rear axle, wireless, SA6 Airbag passenger, SB1 Comfort driver seat, SB2 Comfort passenger seat, SE5 Lumbar support driver seat, SH1 Thorax-pelvis sidebag driver, SH2 Thorax-pelvis sidebag passenger, SH9 Windowbags for driver and passenger, T14 Active locking mechanism sliding door, T19 Sliding door left, T70 Childproof lock on doors in passenger compartment, T74 Grab handle for entry, T75 Grab handles for entry driver and passenger, U3V Seat arrangement face-to-face 1st row of rear seats, rails, U73 Armrests for seating in the passenger compartment, UR1 Seat rail system with quick-release mechanism, US4 3-seater bench seat comfort 1st row, outer seat foldable, US5 3-seater bench seat comfort 2nd row, outer seat foldable, V23 Interior trim high-quality design, V36 Roof lining, V41 Plastic floor TPO in the passenger compartment, VH1 Grab handle in the rear, VY2 Fabric Tunja black, W16 Window front left, fixed in side wall/sliding door, W17 Window front right, fixed in side wall/sliding door, W32 Hinged window passenger compartment rear electric, W65 Tailgate, W70 Tinted glass in the rear, black glass, W78 Window in tailgate with wiper and washer system, Z9B Driver Comfort package, ZG2 Permanent all-wheel drive, ZQ8 Tourer PRO Hodpfey Tg A Sjx Aitjfn We would be happy to provide you with an offer for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we will gladly provide you with a customized offer. Mr. Kiel will be happy to assist you. IMPORTANT: Viewing only by prior appoi

Condition: new, NSK 7940A5TRDULP3 Angular contact ball bearing set = 2 pieces, unused in original packaging, 100% functional, scope of delivery as shown in the photos. Hfodoi Eb U Aopfx Aitjn

Condition: used, mileage: 48,916 km, power: 115 kW (156.36 HP), first registration: 03/2020, fuel type: diesel, empty load weight: 4,834 kg, maximum load weight: 2,656 kg, overall weight: 7,490 kg, wheelbase: 3,020 mm, next inspection (TÜV): 10/2027, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,000 mm, loading space width: 2,350 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electronic stability program (ESP), power assisted steering, traction control, trailer coupling, Exterior * Roof hatch/vent flap, roof * Cab rear wall with window Interior * Air conditioning * Electric windows, right and left * Driver's suspension seat, standard Comfort and Environment * Lane keeping assist * Cruise control * Light and rain sensor Other * Trailer brake, 2-line * Trailer coupling, disc coupling / ball hitch * Trailer coupling, ball head up to 3.5 t * Batteries, 2 x 12 V/100 Ah, maintenance-free * Co-driver's fixed seat, basic * Three-way tipper, Meiller 4000 x 2350 x 400 mm * Electronic compressed air supply unit, medium * Electronic braking system with ABS and ASR * Front mirror, heated * Rear underrun protection (ECE) * Tipper bridge, steel floor 4 mm Hjdpfjz Szdwox Aitsfn * Hire purchase/financing or leasing available through Daimler Truck Financial Service Germany (DTFSD). We would be happy to prepare an offer for you. * Center seat, with 3-point safety belt * Engine version Euro 6d * Auxiliary drive * Payload 2656 KG * Radio with USB connection and Bluetooth * Lashing recesses in the tipper bed * Preparation for toll collection * Differential lock, rear axle * Battery cover Miscellaneous: * Nationwide delivery for €399 net plus VAT (€474.81 incl. VAT). * For all vans: On request, 12 or 24 months of Mercedes-Benz used car warranty is possible. * We will gladly take back your current vehicle, offset it against the new vehicle, or pay you the purchase price. * Leasing/financing via Mercedes-Benz Bank. We would be happy to prepare an offer for you. * Former rental vehicle * No liability for printing and typographical errors * Subject to errors and prior sale.

Condition: used, mileage: 211,500 km, power: 85 kW (115.57 HP), first registration: 03/2011, empty load weight: 2,580 kg, maximum load weight: 420 kg, overall weight: 3,000 kg, wheelbase: 3,400 mm, next inspection (TÜV): 03/2026, fuel: domestic gas H, energy efficiency: G, fuel consumption (urban): 14.3 l/100km, fuel consumption (extra-urban): 9.4 l/100km, fuel consumption (combined): 11.2 l/100km, color: blue, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 2, maximum speed: 163 km/h, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, sliding door, trailer coupling, * German vehicle, second owner * Vehicle ID number: WV1ZZZ7HZBH039748 Special equipment: * 2nd battery, 80 Ah * Trailer hitch: fixed ball head * Electrical package 1 * Rear tailgate with glazing * Heated rear window with wiper system * Climatic air conditioning (cab) * High partition between cab and cargo area with fixed window * Fog lights with integrated cornering lights * Spare wheel with road tires * Mud flaps, front and rear * Seats in the cab: driver's seat with height adjustment and lumbar support * Reinforced stabilizers * Daytime running lights * Interior trim in the cargo/passenger compartment: hardboard, half-height * Additional lashing eyes (2) * Lashing eyes in the cargo area * Preparation for mobile phone/cell phone * Central locking with remote control Standard equipment: * Airbag, driver/passenger side * Anti-lock braking system (ABS) Hedpfx Asz S N Tajitjfn * Drive type: front-wheel drive * Exterior mirror, aspherical, left * Exterior mirror, convex, right * Floor covering in the cab: rubber * Electronic stability program (ESP) with brake assist, ASR/ABS, EDS and hill start assist * Driver assistance system: brake assist (HBA) * Vehicle without windows in the cargo/passenger compartment * Vehicle without child safety lock in the cargo/passenger compartment * 5-speed transmission * Interior filter: pollen filter * Body/structure: standard van * Body variant: normal roof * Headlight range adjustment * Truck registration * Engine 2.0 L - 85 kW catalytic converter (AXA) * Non-smoker package * Wheelbase 3400 mm * Low emissions according to Euro 5 emission standard * Headlights H4 * Sliding door, cargo/passenger compartment, right * Power steering * Seat cover/upholstery: fabric * Seats in the cab: passenger seat adjustable * Seats in the cargo/passenger compartment: 1st row of seats omitted * Steel rims 6.5x16 * Immobilizer (electronic) * Heat-insulating glazing * Permissible total weight 2.85 t Nationwide delivery possible!!! Trade-in possible!!! Leasing and financing possible, even without a down payment Errors, printing errors and prior sale subject to change

Condition: used, mileage: 38,701 km, power: 129 kW (175.39 HP), first registration: 01/2025, fuel type: diesel, empty load weight: 2,670 kg, maximum load weight: 830 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 7, loading space volume: 2 m³, loading space length: 3,420 mm, loading space width: 2,070 mm, loading space height: 400 mm, Equipment: air conditioning, cruise control, navigation system, parking heater, trailer coupling, CERTIFIED PRE-OWNED Plus, Color: White IC 194, Unladen weight: 2670 kg, Permissible total weight: 3500 kg, Cargo area (L W H): 3,420 mm x 2,070 mm x 400 mm, Cargo area volume: 2 m³, Seats: Fabric, Leaf spring suspension, 2 x Airbag, Trailer hitch: TRAILER COUPLING WITH BALL HEAD, Electronic Stability Program (ESP), Automatic climate control, Navigation system: MY IVECO INFOTAINMENT 10 INCH WITH NAVIGATION, Adaptive Cruise Control (ACC), Voice input system, Auxiliary heater, Comfort driver's seat, Driver's seat adjustable in height, Passenger bench seat for 4 people, Automatic headlight control, USB connection, Lane keeping assist, Parking assist (rear), Rear view camera, Rain sensor, Power windows, Outside temperature display, Fog lights, Electrically adjustable and heated exterior mirrors, Tire pressure monitoring system, Central locking with remote control, Tinted glass, Underride protection: rear, Tire repair kit, Daytime running lights, Connection plug 1x13-pin, Driver alertness system, Speed limiter, Traffic sign recognition, Autonomous Emergency Braking System (AEBS), Black box event data recorder, Comfort driver's seat, sprung, DRIVER CAB BACK WALL WITH WINDOW, USB SOCKET DRIVER AND PASSENGER SIDE, VOICE ASSISTANT ALEXA INTEGRATED, OUTLINE LIGHTS ON THE CHASSIS, WITHOUT REAR WALL INSULATION, TRAILER LIGHT CONNECTION 12 V 13 PIN, LONG MATERIAL CARRIER ON THE FRONT WALL, BATTERY CHARGED, COMFORT PLUS, PLATFORM INTERNAL WIDTH 2,070 MM, PASSENGER BENCH SEAT WITH MULTI-FUNCTION STORAGE, HOMOLOGATION INCOMPLETE VEHICLE, COMFORT HEADRESTS, Errors, changes and prior sale reserved. We speak English. Mowimy po Polsku. Goworim po ruski. Hfedpfez Sxbgex Aitsn