Sliding table saw

SCM Si 5 L'invincibile

Condition: new, Year of construction: 2024, New machine Year of manufacture 2024 Equipment and technical data: L'invincibile SI X - SLIDING CIRCULAR SAW WITH DOUBLE SAW BLADE INCLINATION L'invincibile SI X version CE Volt 400 EU Frequency 50 Hz Pre-scoring unit with independent motorization Signaling LED of the pre-scoring unit in operation Lhelhccov E Sy Ueqqjh Main saw blade diametermm550 Max. saw blade cutting height at 90°/+46°/-46°mm200/130/105 Cutting width at the parallel stopmm1500 Cutting length with carriagemm3200 x 3200 Three-phase motorkW/Hz9 / 50 Availability: short term Location: Hochheim

Condition: new, work table dimensions 2500 x 780 mm spindle DM 30 mm tilting of spindle +/- 45,50 usable spindle lenght 140 mm Max. tool DM under table 300 x 80 mm suction DM 1 x 120 & 2 x 100 mm Motor elektrospindel 7,50 kW elektro spindel with inverter for speed 900 to 12.000 RPM control panel with mit "Easy Touch 7" program "Flex"- fence with autom. adjustment via 'Easy Touch 7' left right turning of spindle table elongation front INCL. OPTIONS: - "Fast” table with autom. adjustment via 'Easy Touch 7' control - version “LL” with 2 cast iron tables (2500 mm) Lholhcjd Etkhecqqjh Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Engine power: 12.24 HP (9.0 kW), Year of manufacture: 2021, Cutting height (mm): 200 mm, Cutting width: 1500 mm, Scoring unit: Yes, Saw blade tilt 46 to +46°, Easy Touch control, Format cuts 3200mm, Suction nozzle diameter 120mm Lhslsunvbkehccqqjh

Condition: used, Year of construction: 2010, total length: 3,500 mm, total width: 2,200 mm, total height: 1,500 mm, Weight: 1.050 kg Price: On request - Stroke of parallel fence [mm]: 1330 - Table width [mm]: 1040 - Max. cutting height with scoring tool: 140 Lhsljwrzfrehccqqsh - Scoring saw blade diameter [mm]: 120 - Max. bevel angle [°]: 45 - Max. cutting height [mm]: 130 - Roll table length [mm]: 3200 - Motor power of saw blade [kW]: 5.5 - Digital readout: 1 - Max. saw blade diameter [mm]: 400 - Max. cutting length [mm]: 3200 - Scoring blade: 1 - Year: 2010 - Documentation available: No - CE mark available: Yes - Serial number: AB/201029 - Voltage [V]: 400 - Transport dimensions: 3500mm x 2200mm x 1500mm (l x w x h) - Transport weight [kg]: 1050kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: used, Year of construction: 1995, Sliding carriage: 3000 mm Motor: 5.5 kW Scoring unit Cutting width: 1280 mm Saw blade diameter: max. 300 mm Speed: 4000 rpm Scoring saw blade diameter: max. 100 mm Weight: 715 kg Lslhccovvknreqqehh Storage location: Nattheim

Condition: used, SCM TECH 99 L Lolhccswhwn Ijqqohh CNC machining center with lock case milling unit Machine is FUNCTIONAL and ready for demonstration from a RETIRED/Handcraft business From the site of the carpentry, as inspected FINAL SALE FIXED NET PRICE €12,500.00

Condition: new, Year of construction: 2025, cutting length (max.): 3,200 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, main saw diameter: 400 mm, type of motor: three-phase motor, type of input current: three-phase, CIRCULAR SAW model SCM SI 400 EP NEW machine in prompt delivery CE regulation: YES CN control "READY" 2 controlled NC axes (lifting and tilting of the blade) - blade lifting and tilting management - tool data settings with automatic correction of the height of the blade with respect to the inclination - electric and automatic NC mode with 99 storable programs digital display on the parallel guide n.02 reversible stops on the squaring guide extension floor out with scoring unit : YES max diameter saw blade 400 mm length of the squaring carriage mm 3200 main blade motor power Hp 9.5 Lslhccqsglp I Noqehh scoring unit motor power Hp 1,7 3 main blade rotation speed rpm. 3000 /4000 / 5000 volt. 380/50

Condition: used, Year of construction: 2004, Saw unit: pivots 45°. Carriage length: 3200 mm. Maximum saw blade diameter: 450 mm. Saw blade bore: 30 mm. Motor power: 7.5 kW. Max. Cutting width: mm Control panel: at eye level Height adjustment: input via keyboard Tilt adjustment: input via keyboard Tilt angle display: digital Cutting width display: digital Table extension length: yes Cross-cutting at the cross stop: 3200 mm Cross stop display: scale Scoring device adjustment: electric Scoring blade: PSV Protective cover: yes End position lock: yes Automatic motor brake: yes Speeds: 2500/3500/5000 rpm Description: Cutting height at 450 sheets, 150 mm Weight approx.: 1180 kg Dimensions: 3200 x 1800 x 1800 mm Extraction diameter: 1 x 80, 1 x 120 mm Storage location: Nattheim Lslhccjwayx Tjqqjhh

Condition: used, Year of construction: 2014, MAIN FEATURES EDGER: HIGHEST CUTTING QUALITY GUARANTEED IN THE LONG TERM OPERATOR SUPPORT: ONE SINGLE CUT – THE RIGHT SAWING UNIT: FOR A PERFECT CUT Technical data SI400 EP CLASS Max cutting height at 90° (mm) 140 with blade 400mm Max cutting height at 45° (mm) 97 with blade 400mm Saw blade tilt (degrees) 45 Lifting and tilting of the saw unit programmed Control/working height indicator Ready Saw blade speed (rpm) 3000- 4000- 5000 Scoring unit speed (rpm) 8500 Main motor power [S6 -40%] kW (HP) 7(9.5) Hz50 Scoring unit power [S6 -40%] kW (HP) 0.9(1.2) Hz50 Format cuts: - with carriage 3200 (mm) - with carriage 3800 (mm) 3200x3200 3800x3200 Cutting width with parallel stop (mm) 1270 Extractor nozzle diameter: - on the frame (mm) - on the sawblade guard (mm) - on the riving knife (mm) 120 100 60 Standard equipment and accessories - 10 year warranty on the sliding system of the saw carriage - Sliding saw carriage in anodized aluminum profile with guide made of hardened, ground and flanged steel guides - Scoring unit with independent motorization adjustable from the outside and stops for easy sawblade positioning - "READY" Electronic control: 2-axis control (3rd axis on request) with:* Height adjustment and inclination of the saw unit (parallel stop control on request)* Management of tool data with automatic correction of the cutting height in relation to the inclination angle of the Saw blade * Manual, semi-automatic and automatic mode with 99 storable work programs* Additional functions: Calculator and hour meter - Eccentric clamping device - Trimming frame for quick positioning of the stop for miter cuts - Table extensions in the outfeed - Trimming carriage length 3200mm - Manual parallel stop with reading of the stop position via ruler with slide on 50mm steel guide and micrometric adjustment - Motor with direct connection with push buttons Safety/Protection - Emergency stop button on the front - Emergency stop button on the side in the parallel stop area (CE version) - Micro circuit breaker on the blade cover (CE version) with quick release - Thermal protection switch - Saw blade guard mounted on the riving knife (version with guards) with suction nozzle, 60mm diameter - Saw blade pendulum protection (CE version) - Automatic motor brake on the main saw blade (CE version) - Lockable main switch - 110V auxiliary circuit - C.E. Declaration of conformity (CE version) SI400 EP Class - sliding table saw with electronic control - CE version 1 pc. Volt 400 EU 1 pc. Frequency 50 Hz 1 pc. Version "READY 3 UP" (CE and USA/Canada) 1 pc. Complete with: - motor-driven parallel stop with electronic programming * position display via magnetic tape * continuous adjustment via switch * incremental adjustment option * automatic set up * electronic reading of the stop position * round guide, 50 mm diameter * swiveling device for stop under table * pneumatic blocking device * sensor for the automatic stop position, according to the dimensional adjustment of the stop profile (high/flat position) - on/off switch for the motors for the main saw blade and scoring unit integrated in the edger carriage - swiveling control panel easily accessible by the operator "Quick Lock" format stop 1 pc. Edger frame with simultaneous positioning, blocking or release. Complete with extendable roller for workpiece support, 2400 mm total length. Miter stop with automatic L Lsljwp Un Ijhccqqohh

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Lhjlovvi N Iohccqqeh