Used Calibration Ball for sale (3,765)

Condition: used, This listing is for a Kendall Genius 2 Checker/Calibrator The Genius™ Checker & Calibrator checks the accuracy of the Genius™ tympanic thermometer and automatically recalibrates the thermometer, if necessary. In addition, the checker & calibrator has the capability to generate a test report for each thermometer tested and save it to a USB flash drive. It works with all Genius™ thermometer software revisions. The Genius™ checker and calibrator contains two independently controlled infrared calibration targets that are similar to factory calibration targets. These “blackbody” targets are designed to have efficient radiative heat transfer and produce infrared radiation that approximates the human ear at temperatures of 32.2°C (90.0°F ) and 40.6°C (105.0°F). Bdodpjxzgvxjfx Aa Djb

Condition: used, This listing is for the Troemner 4KG Cylindrical Calibration The unit is in full working condition and is ready for immediate use The Troemner 4 kg Certified Calibration Weight in a cylindrical design, compliant with ASTM standards, is a precision mass standard used for calibrating high-precision balances. These weights are essential for ensuring the accuracy and traceability of weighing instruments in laboratory and industrial settings. Key Specifications Material: High-grade stainless steel, such as Troemner Alloy 8, known for its uniform density, low magnetic properties, and resistance to corrosion. Design: Cylindrical shape with a protective polycarbonate case. Density: Approximately 7.95 g/cm³ at 20°C. Bedpfxsxv Dpfj Aa Dodb Tolerance: Varies by ASTM class; for instance, ASTM Class 3 weights typically have tighter tolerances suitable for calibrating balances with readability as low as 0.01 g to 0.001 g. Certification: Available with ISO/IEC 17025 accredited certificates or traceable certificates, ensuring compliance with international calibration standards. .

Condition: used, This listing is for a Sartorius F1 10KG Cylindrical Calibration Weight The unit is in full working condition and is ready for immediate release. This is a high‑precision reference/test weight manufactured by Sartorius, made of stainless steel, with a nominal mass of 10 kg. It’s used primarily for calibrating, verifying and testing weighing instruments such as balances and scales. For example, the “Cylindrical Calibration Weight” line covers nominal masses from 1 g up to 10 000 g (10 kg) and this item falls at the top end of that range for the 10 kg value. Bedpfx Aoxv Aavea Djdb Because it’s manufactured to a high class (F1 / OIML F1) and often comes with traceable certification, it serves as a “standard” weight for checking or adjusting high‑capacity lab or industrial balance

Condition: used, This listing is for the Troemner 2KG Cylindrical Calibration The unit is in full working condition and is ready for immediate use The Troemner 2 kg Certified Calibration Weight in a cylindrical design, compliant with ASTM standards, is a precision mass standard used for calibrating high-precision balances. These weights are essential for ensuring the accuracy and traceability of weighing instruments in laboratory and industrial settings. Key Specifications Material: High-grade stainless steel, such as Troemner Alloy 8, known for its uniform density, low magnetic properties, and resistance to corrosion. Design: Cylindrical shape with a protective polycarbonate case. Density: Approximately 7.95 g/cm³ at 20°C. Tolerance: Varies by ASTM class; for instance, ASTM Class 3 weights typically have tighter tolerances suitable for calibrating balances with readability as low as 0.01 g to 0.001 g. Certification: Available with ISO/IEC 17025 accredited certificates or traceable certificates, ensuring compliance with international calibration standards. Bodpfjxv Dn Uox Aa Dodb .

Condition: used, This listing is for 1 of 2 Biorad Gs-900 Calibrated Densitometer The unit is in full working condition and is ready for immediate release The GS-900 Calibrated Densitometer is a self-calibrating 21 CFR Part 11 gel imaging system designed for acquiring gel, blot, and film images. It is capable of reproducibly imaging gels, blots, and film and quantitating proteins across a wide dynamic range. The system uses transmissive and reflective imaging to scan chromogenic samples at the optimal detection wavelength, and its three-color red, green, and blue CCD imaging technology enables accurate, reproducible quantitation with a wide variety of common stains. Key Features: Imaging Capabilities: Transmissive and reflective imaging for gels, blots, and film. Dynamic Range: Wide dynamic range for accurate quantitation. Imaging Technology: Three-color red, green, and blue CCD imaging. Calibration: Self-calibrating for consistent performance. Bedpfx Aajxv D Dce Dodb Compliance: 21 CFR Part 11 compliance for regulatory environments. Included Components Scanner and Cables: Comes with the necessary scanner and cables for operation. Optional Software: Image Lab™ Software: PC-compatible software for image analysis. 21 CFR Part 11 Module: Security edition software for compliance with 21 CFR Part 11. Installation and Operations Qualification (IQ/OQ) Kit: Optional kit to meet cGMP environment needs. Specifications: Scan Area: 29 x 33 cm (transmissive and reflective) Wavelength: 400 – 750 nm Bit Depth: 16-bit grayscale

Condition: used, Wide belt calibrating sander Manufacturer: Viet Spa Italia Bjdpfx Ajx N T Efea Djdb Model: PL ICCC Year: 1995 Power: 54 kW Air pressure: 5–8 bar Weight: 6200 kg

Condition: refurbished (used), functionality: fully functional, !!!We have two units in stock, price is for one unit only!!! Thermo Scientific 3951 Reach-In CO2 Incubator - Calibrated! Specification Details Capacity 821 L (29 cu ft) Bdsdpfx Aaexaqncj Dob Temp. Range Ambient + 5 °C to 50 °C CO₂ Range 0–20% (TC sensor) Humidity < 80% (medium) or < 90% (high) with 15 L reservoir Uniformity ± 0.3 °C at 37 °C (control ±0.1 °C) Interior Dimensions 68.5 × 78.7 × 152.4 cm Exterior Dimensions 83.8 × 96.5 × 203.2 cm Weight ~227 kg (500 lb) Electrical 200/230 V, 50/60 Hz, 10 A Certification CE, UL, cUL Good working condition. Please check out our other listings as well.

Year of construction: 2011, condition: refurbished (used), functionality: fully functional, !!! Calibrated, we have two units in stock - price is for one unit only !!! Overall Dimensions - inches (mm): Model NU-5500/E Height: Exterior: 39.5 Inches (1003.3mm) Width: 25.5 Inches (647.7mm) Depth: 26.5 Inches (673.1mm) Height: Interior: 25.5 Inches (647.7mm) Width: 21.5 Inches (546.1mm) Depth: 21.0 Inches (533.4mm) Shelf Capacity: Size: 19.25 Inches (489mm) x 19.25 Inches (489mm) Performance Parameters Bsdpfxjxbdyho Aa Dsdb - Temperature Range: 18°C to 55°C (5°C above ambient to 3°C ambient max.) - Temperature Uniformity: +0.3°C at 37°C. - Temperature Accuracy: +0.1°C. - CO2 Range: 0.1 to 20%. , CO2 Accuracy: +0.1% , CO2 Recovery: Up to 5% +0.2% in 4 minutes. - Temperature Recovery: 0.3°C/min. (Average) - Temperature Display Resolution: 0.1°C , CO2 Display Resolution: 0.1% - Door and Perimeter Heater Control Logic: Proportional 0-100% (adjustable) , Door & Perimeter Heater Duty cycles are processor controlled. , Temperature Sensor Type: Precision Integrated Circuit - CO2 Control Logic: Fixed Algorithm/Manual Environmental Adaptable. , CO2 Sensor Type: Infrared , Connectors on rear panel are provided for chart recorder, remote alarm, and printer connection.

Year of construction: 2022, condition: refurbished (used), functionality: fully functional, !!! Calibrated, we have two units in stock. Price is for one unit only !!! Volume: 161 l Disinfection routine: Optional Oxygen control: 1 - 18%, 22 - 80% Access port diameter: 30 Bdsdexbiliepfx Aa Djb Data logger: Yes CO2 sensor type: Infrared Chamber: Copper-enriched stainless steel Inner glass doors: 4 Humidity alert and monitoring package: No Minimum temperature: 26 Maximum temperature: 50 Touch screen controller: Yes Active humidification: No

Year of construction: 2021, condition: refurbished (used), functionality: fully functional, !!! Calibrated, we have three units in stock. Price is for one unit only !!! External Dimensions (W x D x H) 620 x 730 x 905 mm Internal Dimensions (W x D x H) 490 x 523 x 665 mm Volume 165 liters Net Weight 80 kg Temperature Control Range & Fluctuation AT +5 ~ +50, ±0.1 °C Temperature Uniformity ±0.25 °C CO2 Control Range & Fluctuation 0 ~ 20, ±0.15 % O2 Control Range & Fluctuation - Humidity Level & Fluctuation 95, ±5 %RH Temperature Sensor Thermistor Sterilisation Method H2O2 Decontamination (Optional) CO2 Sensor Dual IR O2 Sensor - Display LCD Touch Screen Exterior Material Painted Steel (rear cover not painted) Interior Material Stainless Steel Copper-Enriched Alloy Insulation Material Extruded polystyrene Bjdpfoxbilpsx Aa Djdb Heating Method Direct Heat & Air Jacket System Outer Doors 1 Outer Door Lock Optional Field Reversible Door Included Inner Doors 1 gastight - made of tempered glass Shelves 4 x Stainless Steel Copper-enriched Alloy Shelf Dimensions (W x D x H) 470 x 450 x 12 mm Max. Load Per Shelf 7 kg Max. Shelf Capacity 10 Access Port 1 Access Port Position Rear Upper Left Access Port Diameter 30 Power Failure R Out of Temperature Setting V-B-R High Temperature V-B-R Out of CO2 Setting V-B-R Out of O2 Setting - Door Open V-B Power Supply 230 V Frequency 50 Hz Noise Level 29 dB

Condition: good (used), Year of construction: 2001, * 5 grinding units: - 1 bottom 18.5 kW - 2 lower 15 kW - 3 upper 18,5 kW - 4 upper 15 kW - 5 upper 11 kW * stepless feed regulation on inverter (2x2.2kW) * electric adjustment of table height * pneumatic oscillation * grinding belt blowing Bdodpst Hmg Iofx Aa Djb

Condition: used, Falling Ball Viscometer like Thermo HAAKE Type C THERMO ELECTRONIC CORPORATION Type 002-7580 Serial No.: With the Thermo falling ball viscometer, you can measure viscosity precisely without electricity, using only a stopwatch. It allows for accurate measurement of the viscosity of transparent Newtonian liquids and gases. Measuring principle: A ball moves by rolling and sliding inside an inclined cylindrical tube filled with the liquid to be tested. The time it takes for the ball to travel a defined measuring distance is recorded. By swiveling the measuring section, the return movement of the ball can also be used for measurement. The result is displayed as dynamic viscosity in mPa·s. Max. viscosity: 100,000 mPa·s Min. viscosity: 0.5 mPa·s Standards: DIN 53015, ISO 12058 Reproducibility: < 0.5% Thermometer: -1 °C to +26 °C (read-out accuracy 0.1 °C) Ball set Type 800-0182 with 6 balls (balls 1 and 2 made of borosilicate glass; balls 3, 4, 5 and 6 made of nickel-iron alloy) Recommended for: Chemical industry (polymer solutions, solvents, printing inks) Pharmaceutical industry (raw materials, glycerin) Mineral oil industry (oils, liquid hydrocarbons) - Inner glass tube (falling tube) damaged on one side at the screw socket (see images). Replacement part no. 002-6968 Dimensions of inner tube: outer diameter 20 mm; inner diameter 16 mm; wall thickness 2 mm; length 225 mm Dimensions (W x H x D): 170 x 310 x 220 mm Bdodpfx Aoxcbnroa Dsb Weight: 3.5 kg

Condition: like new (used), Manufacturer: Löhnert / Berger Type: SKM 20 Electrical Motor: Included Bjdjg Snrxspfx Aa Djdb See PDF-file below for more detailed information. Will be sandblasted and painted.

Year of construction: 2015, condition: good (used), functionality: fully functional, machine/vehicle number: 000575, We sell a used CURIEMENTOR 4 isotope calibrator made by PTW-Freiburg , MFG: 2015, SN: 000575 Bdsdpfxjunb Atj Aa Dob This equipment is a precise measuring instrument for nuclear medicine. The equipment contains the PET, the ionization chamber; lead housing for the ionization chamber; transport box for syringes with radiopharmaceutical; TSS 5 Ecarn syringe 5 cc - 2 pcs; TSS 10 Screen syringe 10 cc; Radiagem 2000 dosimeter with SABG-15+ probe. Dose calibrator (CURIEMENTOR 4) are used in nuclear medicine (SPECT and PET) to determine the exact activity of radioactive dose administered to the patients. The user has direct access to 30 different isotope calibrations. When measuring isotopes with rapid decay, the displayed measuring values are updated each half second, which provides continuous display. Price Euro 7500 Euro + VAT, FCA: Bucharest/ Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 1995, condition: excellent (used), 2 grinding aggregates with 22kW motors each Cleaning brush Bdsdpfshxvi Ejx Aa Deb Smooth feed regulation Vacuum suction of the workpiece Powered receiving roller table

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Ball and cylinder forming machine Brand Vemag Model BallControl XXL Year of production 2021 ⁃ For forming meat balls and cylinders ⁃ Capacity up to 200 strokes per minute depending on portion size for unfilled products ⁃ For connection to the main VEMAG HP-E series filling machine Flow distributor ⁃ Base unit, flow distributor pipes, connecting pipes in a stainless steel housing, Bdjdpfx Aajv Ihd Uj Deb ⁃ The distributor is mounted on a movable slider, which facilitates assembly and disassembly, ⁃ Servo drive of the cut-off plates - with full control via the VEMAG filling computer, ⁃ Metal safety guards, ⁃ Mobile design, ⁃ Frame made of stainless steel, ⁃ Dosing directly onto a 1 x 1 m tray, ⁃ Dosing onto a 1 x 1 m tray ⁃ Belt width 1000 mm, ⁃ With metal tray dispenser 1m x 1m ⁃ Trolley for dismantled parts for washing and hooks for hanging molding sets x 2pcs.

Year of construction: 1993, condition: ready for operation (used), Automatic sander VIET Mod. Rita 4C EL Fixed plane moving heads Working width 1350 mm Working height 4 – 160mm Nr 03 suction hood depressors diameter 150 mm Belt feed speed 6 – 20 with 3 kw inverter Hood carpet cleaning brush diameter 120 mm Composition: 1st transversal polishing unit mod. TET 60 electronic pad 60 sectors Lamellar tape 6150 x 140 mm Our abrasive 8350 x 170 mm Velocity 5.6 – 26.2m/s Inverter kw 15 Three 140 mm diameter extraction hoods 2nd roller sanding unit mod. R320 – 40 rubber coating 40° SH Bsdpfxoltlx Tj Aa Dodb Sanding belt 3250 x 1400 mm Speed 1.5 – 12.5m/s Inverter kw 15 Belt cleaning blower Two extraction hoods with a diameter of 140 mm and one with a diameter of 200 mm 3rd buffer polishing group mod. TE 60 electronic pad 60 sectors Sanding belt 3250 x 1400 mm Velocity 2.9 – 14.1m/s Inverter kw 15 Belt cleaning blower Two extraction hoods with a diameter of 140 mm and one with a diameter of 200 mm 4th cross sanding unit mod. TET 60 electronic pad 60 sectors Lamellar tape 6150 x 140 mm Our abrasive 8350 x 170 mm Velocity 5.6 – 26.2m/s Inverter kw 15 Three 140 mm diameter extraction hoods 5th scotch-brite group Engine kW 0.55 Suction hood diameter 140 mm 6th brush unit Engine kW 0.55 Suction hood diameter 140 mm 7th panel cleaning rotary blower group

Condition: used, Year of construction: 1987, functionality: unexamined, Press force: 200 kN Ram stroke, constant: 210 mm Adjustable strokes per minute: 20 - 60 Usable working energy per cycle: 15 kJ Drive power: 24 kW Tool installation height between table and ram, stroke down, adjustment up: 500 mm Ram adjustment: 100 mm Ram clamping area: 600 x 600 mm Bsdpfxewy Sqzj Aa Dodb Table clamping area: 600 x 600 mm Ejector stroke: 90 mm Weight: 20 t

Condition: good (used), Year of construction: 2005, Offer 25190 Technical Data approx.: - max. temperature 400°C - temperature control 0 - 250°C - time automatic 0 - 60 min. - working space under the yoke 320 - 200 mm - max. ball bearing weight 250 kg - drive 400 V / 12 kVA - space requirement approx. W 850 x D 600 x H 1150 mm - weight approx. 150 kg - yokes 40 + 50 + 80 mm - mobile base Bjdpfx Aaewp Exds Dsdb

Condition: excellent (used), DMC Topsand 2000 calibrating and sanding machine 4 Belts First group 1 roller Second group 1 roller Third group 1 electronic sectioned pad Bdsdpoi Dakrofx Aa Dsb Fourth group 1 electronic sectioned pad super finisher Useful width 1350 Vacuum system on belt

Year of construction: 2000, condition: excellent (used), VACUUM CALIBRATION TANK LÜERS VT125-1-6 Bdsdpfx Aaoiidm Ts Deb Chamber: 1st Pipe Diameter: Max 125mm Length: 6 meters Feed: electrically back and forth Year of construction: 2000 Material: stainless steel

Year of construction: 2024, condition: new, The Ball mill is ideal for grinding hard, brittle, hard-tough materials such as catalysts, ceramics, clinker, building materials, glass, minerals, ores, minerals, silicon, slag and many more. Bodpfxeku A H Ue Aa Djdb

Condition: good (used), Mahr 865 SE Indicator Calibrator Mahr 865 SE Indicator Calibrator with 1505 IC Indicator + 1299 IC/S Printer Height adjustable table More indicator calibrators in other sizes - new and used - you will find in our store! International shipping costs on request! Bdedjihpvhspfx Aa Djb

Condition: used, Chair seat sander Bsdpfx Aaeqgtblj Dodb

Year of construction: 2024, condition: new, The Ball mill is ideal for grinding hard, brittle, hard-tough materials such as ceramics, clinker, building materials, glass, minerals, ores, minerals, silicon, slag and many more. Bsdpfsgchbmsx Aa Dsdb