Caliper for sale
Your location was not identified (Edit)
used
Caliper CSE INOX (stainless steel)
to the shrinkage measure Measure shrinkage in model making or mould making
Shrinkage measurement caliper
Measuring range in millimetres: 0-300mm
Measuring leg length: 100 mm
Inside measuring attachments: 10 mm
Tip leg: 45 mm
- Scale with 0% / 1.0% / 1.25% / 1.5%
- Nonius reading
- precise scaling
- Locking screw
- Marking tips exchangeable
- INOX stainless
sound condition
Dwxija
5 pieces available, price per piece more
2006
repair required (used)
Brake caliper of a Unimog U300, the caliper was replaced for the TÜV because the pistons are a little bit stiff, ideal for repair.
weight: 9kg
Pickup by appointment, or shipping for 6,-€
The sale takes place as defect under exclusion of any warranty!
Bmu0kyp8cw
This offer is subject to change and without obligation. Subject to changes, errors and prior sale. more
used
CF DIGIMATIC carbon fibre vernier caliper
measuring range 0 to 600 mm
inside measurement of 20 mm
precision +/- 0.04 mm
measuring side length 100 mm
display 0.01 mm
Fjcwfikl
in wooden case 830 x 220 x 55 mm
weight approx. 2.3 kg more
Execution:
Digital caliper IP54 with data output. Easy to read, high-contrast LCD display with 11.5 mm digit height. Very long battery life through modern, energy-efficient measuring system. After 20 minutes, the system automatically switches to economy mode and is reactivated by simply moving the slider. Measured value and zero point are retained. With preset (dimensional presetting). Ergonomic housing with Santoprene® component that is pleasant to the touch. The measuring surfaces are finely l... more
good condition (used)
Shrinkage Caliper gauge
33aqfmpp
Make Preisser
Measuring length 300 mm
Shrinkage : 1,75% , 2% , 2,5 more
Workshop caliper Fabr. MITUTOYO series 160
Technical data:
Measuring length 2050 mm
Internal measurement from 83 inch
Beak length 180 mm
The Noniusbahn 40 x 12 mm material thickness
Weight 10.2 kg
External dimensions approx. 2320 x 250 x 25 mm
Bb9rddvwbd
made of stainless steel
used, in very good condition more
used
Calipers, calipers, calipers
-Measuring range 0 - 850 mm
-Feinjustierung
-Measure 963/220 / H12 mm
-Weight 2.2 kg
Nnbld more
measuring range X-axis: ...2000 mm
indexing: 0,1 mm
weight: - kg
Caliper Gauge according to DIN 862
different types / variation:
- length from 500 up to 2000mm
price on single request under this stock no.
i.D.
S8vv0ervq more
Dowel hole drilling machineMake: VITAPType: ALFA 21 CLASSIC With drilling unit 21 spindles / 32 mm spacing / quick change spindles Pneumatic cylinder for horizontal/vertical positioning of the drilling group (45 degree and any intermediate angles). Front/top caliper to obtain the same drilling measure between horizontal and vertical position. Tilting side stops adjustable by metric scale and nonius and magnifying lense on each stop. 2 safety clamps inclined 4 degrees. Height regulation of the b... more
ready for operation (used)
1 x stitching unit 15502 x stitching heads HK751 x SEMKO side caliper control with reject1 x saddle book control1 x stitch control6 x section feeders 1551 with ASIR3 image & bar code recognition1 x cover folder feeder 15281 x three knife trimmer 15651 x stream delivery 1564
Cgini8by
Optional if needed;1 x Muller Martini Apollo stacker delivery 15401 x centre cut device for double trim capacity2 x addtional stitching heads more
Equipped with :
- One boring unit 21 spindles;
- QUICK CHANGE SPINDLES;
- Pneumatic cylinder for horizontal/vertical positioning of the boring group
(45 degreed and any intermediate angles);
- Front/top caliper to obtain the same boring measure between horizontal and vertical
position;
- Tilting side stops adjustable by metric scale and nonius and magnifying lens on each
stop;
- 2 safety clamps inclined 4 degrees;
- Height regulation of th... more
2009
ready for operation (used)
Soft cover perfect bound books with hotmelt glue, Gathering machine, model: 3681 - 16 stations, ASIR III Automatic Signature Image Recognition (barcode), ASAC Automatic Self Adjusting Caliper, Pump(s), Setup element, Reject gate, for incomplete products: 3714, Intermediate element with jogger, Model: Corona C15 S/35 (18"), Number of clamps: 35, Commander, Colour monitor(s), Semi automatic setting, Main milling station, First spine preparation station, Second spine preparation unit, Brushing stat... more
used
Calipers, calipers, calipers
-Measuring range 0-350 mm
Be7i9v2s9c
-Dimension 385/155 / H10 mm
-Weight 0.5 kg more
2019
new
condition of the new machine (operating time about 500 hours)
Specifications:
Machine tools of the 1H983 model are designed for turning the ends of pipes and threading them in a single production
Spindle bore diameter 310
Conditional diameter of the processed pipe, mm
- the greatest ... 299
- smallest ... 73
The largest diameter of the processed product, mm
- over the bed ... 800
- above the caliper ... 450
The largest cross section of incisors, mm ... 32x32
Number of tool positions ... 4
The gr... more
2006
good (used)
MULLER MARTINI PRESTO SADDLESTITCHER
Year 2006
Comprising:-
6 x 1551 Feeders
1528 Cover Feeder
SEMKO SIDE CALIPER
1550 Stitching Unit
Touch Screen Control
2 x HK75 Stitching Heads
1522 Trimmer
Nvd2vgwx
Shingle Delivery
Complete with:-
Operations Manual, Spare Parts Manual, Electrical Drawing, Standard Tools and Accessories more
ready for operation (used)
IN STOCK
1 x stitching unit 380 with Amrys1 x Touch screen controls2 x stitching heads HK75 ONLY 00091 hours1 x caliper control with rejecy1 x stitch control with reject1 x remote control jogger inch6 x section feeders 370 with Amrys1 x cover folder feeder 1554 with Amrys1 x three knife trimmer 449 with Amrys1 x stream belt delivery 1564
Nnj0l
Optional;
Practico stacker with AmrysCentre cut devise for double productionSmall szie kit for feedersSlim line stitching headsLoop ( omega) stitchin... more
Number of motors 2 Stück
3000 mm
Control ja CNC
ja CNC
HECHT double miter saw Exenso DS350E - 3000 mm
-----
for wooden glazing beads, rungs, moldings, aluminum moldings, etc.
Item number 942.5103 Exenso DS350E
- Working length 3000 mm
- Swivel range 22.5 ° (inside) to 135 ° (outside)
- Saw blade holder Ø 350 mm
- with pneumatic saw feed
- Incl. 1 piece Center support.
- Clamping the units pneumatically.
- Positioning control Exenso DS3 with touch panel 15 "display in
dust-proof monitor hou... more
2004
ready for operation (used)
Soft cover perfect bound books with hotmelt glue, Hand feeding station for 2 persons, Gathering machine, model: 1573 - 21x, Age: 2004-2006 (upgraded), Stream/log feeders, model: 3738 - 7x, ASIR III Automatic Signature Image Recognition (barcode), ASAC Automatic Self Adjusting Caliper, Pump(s), Setup element, Reject gate, for incomplete products: 3614 , Intermediate element: 3643, Model: Trendbinder, Number of clamps: 18, Main milling station, Roughening station, Brushing station, Excluding dust ... more
used
Calipers, calipers, calipers
-Measuring range: 0-300 mm
-Scale: 1/20 mm / 1/128 inch
Ewblfrp
-Dimensions box: 460/180 / H30 mm
-Weight: 1.1 kg more
Muller Martini Bolero B8 used perfect binding line, year of construction: 2007. Machine has been CLEANED, 28.443 production hours, 21 stations gatherer 3693/24″, ASAC self adjusting caliper control, ASIR 2 signature recognition control, reject delivery 3614, endsheet gluer for tipping endsheets 3648, spiral race way 3641, jogging element 3643, trenn element 3646, book bloc Solema Fastbook with Autoload, binder with 26 clamps, milling station, 2 separate spine preparation units, 1st Hotmelt spine... more
Built in 2004
Size max: 430 x 320 x 60 mm
Size: 140 x 100 x 3 mm
working hours: 17.900 h
Speed:max 5.000 c/h
Equipment:
gathering machine:
• 18 stations
• 18 feeder 1571
controls:
• ASIR automatic signature image reader
• ASAC automatic self-adjusting calipers
perfect binder:
• 20 clamps
• double kombined spine preparation station
• hotmelt spine gluing unit
• hotmelt side gluing unit
• rotary coverfeeder
• cover scoring
• cover pressing station
• 2nd S cover pressing station
• lay down device
... more
ready for operation (used)
1 x stitching unit 380 with Amrys1 x touch screen controls with job storage and auto make ready2 x sticthing heads HK751 x caliper control with reject1 x stitch control monitor1 x oblique sheet saddle monitor1 x remote control jogger inch6 x section feeders 370 with Amrys1 x cover folder feeder 1554 with Amrys1 x three knife trimmer 449 with Amrys1 x stacker delivery Perfetto 450
Be9z0qzuok more
turning length 450 mm
Wspjna9h
over the brake caliper 310 mm
above the bed 500 mm
Bore in the spindle 51 mm
Tool places in the revolver 12 pcs.
The movement of the revolver x / z 200 / 450 mm
Accelerated feed x / z 24 / 30 m / min
Immediately available
PS: Hydrolic is defective. more
1984
ready for operation (used)
The single-column turning-boring lathe model 1512 is a universal machine designed for processing a variety of products from ferrous and non-ferrous metals in conditions of small-scale and serial production.
Model 1512 is the most widespread among boring lathes in the territory of the former USSR. The machine allows turning parts up to 1250 mm in diameter, up to 1 meter in height and up to 3200 kg in weight. The machine has been exported to many countries around the world.
The following operatio... more
used
Calipers, calipers, calipers
-Measuring range: 0-1000 mm
-Scale: 1/20 mm / 1/128 inch
-Dimension: 1225/250 / H20 mm
-Weight: 3.6 kg
Cyqrsmfq more
- Our offer number: 333/60
- WMW Heckert
- Drilling and boring head Boring tool holder
- 100x 40
- collets: 8, 10, 2x 12 mm
- Mounting: SK 40 with internal screw thread approx. 13 mm
- Diameter of the bars approx. 20 mm (see photo/caliper)
- Sales quantity 1 pcs.
- used
- functional
- optical condition according to photos
You can request all information about your purchase during our business hours from Mon-Thu from 07:30 to 16:30 and Fri from 07:30 to 14:00.
82cnfvac
Information on the purchase... more
Used MAN brake calliperMAN Part number: 81.50804-6073 Suitable for L2000Multiple versions from various manufacturers in stockCondition for the purchase is a business-/commercial activity of the purchaser and corresponding proof of this. Please send us a proof of your business activity (e.g. sales tax identification number, trade licence or association or chamber card) after completion of the purchase process. Delivery will only take place after proof of your business activity, sale and delivery ... more
Stainless steel analogue calliper 1500mm ( 5631 )
Fw0muj7
Manufacturer: Herron
Type: Caliper
Measuring range: 1500 mm
Measured value: 0.02 mm
measure jaw length: 225mm
rail size: 50mm
Size: 1840 * 290 * 25 mm more
2018
good condition (used)
+ N.1 MOD VS-280 FUME EXHAUSTER
Fbb0ap07k
YEAR 2018
Fully automatic perfect binder
monoganascia.
The BQ 280 is a fully automatic, fast and fast perfect binder. All the controls are managed via a touch-screen panel, using Pur glue.
These features combined with the size of the jaw make it the ideal solution for making digitally printed books or photobooks.
Electronic caliper for automatic thickness adjustment. more
Faceplate diameter - 1250mm
The greatest height of the installed part - 1000mm
The largest cross-sectional dimensions of the tool holder - 25x40mm
The length of the horizontal axis X - 775mm
The length of the movement of the vertical axis Z - 700mm
The largest angle of rotation of the slide of the caliper - 45º
The number of positions of the turret - 5
The diameter of the holes of the caliper turret - 70N7
Faceplate rotation range - 0.01 ~ 100mm / rev
The maximum load on the faceplate - 6000kg
T... more
used
Calipers, calipers, calipers
-Measuring range: 0-350 mm
-Price per piece
Be7jclwftl
-Number: 3 x calipers available
-Dimension: 385/127 / H10 mm
-Weight: 0.4 kg more
STRIP THICKNESS- and WIDTH GAUGE
type: supposedly VBK 563/12 E
Noowetu
partially revamped:
(precision dial gauge 20 MUBE/0 include slide bush, caliper
and gauge slide revamped by VOLLMER)
include 2 pc. of amplifier, manufacturer VOLLMER,
type VMF, for thickness-and width measuring process more
2017
as good as new (ex-display)
Workbenches in Pro version
Precise and careful processing
Completely made of steamed, solid beech
All important edges are rounded
Environmentally friendly oiled surfaces
Standard with tool drawer
The two cylinder rods of the collets are precise and stable in a casting
With smooth trapezoidal threaded spindle
French front caliper with German rear caliper with linear Guide, two round bench dogs short, long, two round bench dogs drawer and loading in
Finger hot dip galvanizing in rear caliper and ... more
Machine Reference nr.: 93
CENTERLESS GRINDING MACHINE SCHUMAG SCHLEIPO II
Manufacturer SCHUMAG
Model SCHLEIPO II
Year 1987
Working range Ø 6 – 30 mm.
Bar length Up to 7 mt.
Grinding wheel diameter
Ø 500 x 300 mm.
250 mm. bore of the wheel
Grinding wheel surface speed 35/45/60 mt./sec.
Grinding wheel motor 2 x 37 kW a.c.
Polishing disc motor 2 x 14,5 kW (one is d.c.)
Tension 380 V. - 50 Hz.
COMPOSITION OF THE LINE
Belt loading table with bar size caliper
Inlet rotating roller conveyor
Grinding ... more
Technical data:
- Technomelt Tack 3880 for side gluing
- Purmelt QR 3317 Granulate polyurethane melamine adhesive
- PUR Melt Cleaner (0.5 kg) for nozzle sealing / blue granulate
Accessories:
- KB4000 + KB3500 Initial equipment
- digital caliper gauge for KB-4000 PUR
Available from: immediately
Bhmgfds2ae
Delivery conditions: ex location - EXW
Terms of payment: Payment before delivery/collection
The machine is already dismantled and stored
Accessories without guarantee. The rule is: "Object bough... more
Faceplate diameter - 1120mm
The greatest height of the installed part - 1000mm
The largest cross-sectional dimensions of the tool holder - 25x40mm
The length of the horizontal axis X - 775mm
The length of the movement of the vertical axis Z - 700mm
The largest angle of rotation of the slide of the caliper - 45º
The number of positions of the turret - 5
The diameter of the holes of the caliper turret - 70N7
Faceplate rotation range - 0.01 ~ 100mm / rev
The maximum load on the faceplate - 6000kg
T... more
Calipers, calipers, calipers, inclinometers, inclinometers
-Manufacturer: BWB, protractor / inclinometer with dragonfly
-Measuring range: 0 - 90 °
Jvrkla
-Dimension: 235/42 / H235 mm
-Weight: 2.2 kg more
construction: support segment - system
material width 400 mm
Za7rc9ggo
coil weight 1,0 t
coil internal diameter 265 - 565 mm
weight of the machine app. 0,25 t
dimensions of the machine app. 1,40 x 1,20 x 1,80 m
no. – support segments 3
length – support segments 400 mm
working direction left-right / right-left
counter ring – Ø 1.200 (1.600) mm
shaft – Ø 85 mm
height floor-middle of shaft 840 mm
accessories:
expanding process manually by bevel gear wheel
brake system disk brake
brake caliper pn... more
used
Vernier caliper, caliper, caliper
-Measuring range: 0-300 mm
-Fine adjustment
-for internal measurements
-Price: per piece
-Number: 9x available
-Weight: 0.7 kg
Ql3czqos8 more
used
Vernier caliper, caliper, caliper
Cmef0gz8
-Measuring range: 0-350 mm
-Scale: 1/20 mm
-Dimension box: 450/20 / H25 mm
-Weight: 0.9 kg more
used
Depth gauge, caliper, caliper, caliper
-Measuring range: 0-300 mm
-Fine adjustment
-long measuring legs
-Price: per piece
-Number: 9x available
-Weight: 0.6 kg
Ql3cp9i87 more
used
Depth gauge, dial gauge, depth gauge, depth caliper, calliper, caliper
-Measuring range: 0-100 mm
-Fine adjustment
-long measuring legs
-Pet crate
-Dimensions: 365/180/H40 mm
Q8msxuntb
-Weight: 1.15 kg more
used
Vernier caliper, caliper, caliper
-Measuring range: 0-250 mm
-for: internal measurements
Bpawpqhu8
-Number: 1x caliper available
-Price: per piece
-Weight: 0.75 kg more
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
10 valuable tricks for buying used machines online
Sell now on Machineseeker! Over 160,000 inquiries per month
Sample sales contract for used machines in nine languages
Machineseeker now also sponsering Greuther Fürth
New Machineseeker.com TV commercial with Michael van Gerwen
