Used Alzmetall Ab for sale (140)

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Cpodpfxen N Ekcs Aa Eew Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture 1977 Drilling capacity: 32 mm Cpjdpfsharwvsx Aa Eow Spindle taper: MT 3 – short quill Distance spindle nose – table: 545 mm (short quill) Distance spindle adapter – table: 395 mm (MT adapter) Throat: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Column diameter: 220 mm Spindle speed: 55 – 1450 rpm, stepless Motor power: 1 / 1.6 kW Supply voltage: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds and stepless through variable-speed drive - Intermediate gear stage for high torque at low speeds - MT adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swiveling drill table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Space required (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Condition: excellent (used), Year of construction: 1980, table width: 460 mm, table length: 745 mm, space requirement height: 2,400 mm, space requirement length: 1,200 mm, space requirement width: 800 mm, Manufacturer: Alzmetall Type: AB 40 ST Spindle: MK 3 Cpjdpfx Aevwkw Asa Ejw Table dimensions: 745 x 460 mm Machine can be viewed under power

Condition: used, 1 used column-type drilling machine Brand: Alzmetall Model: AB 3 ESV Drilling capacity: Ø 32 mm Codpfxeyqr Dho Aa Eepw 3 automatic feed rates Spindle taper: MK 3 Distance spindle nose - table: 545 mm Throat: 290 mm Quill travel: 160 mm Column diameter: Ø 220 mm Dimensions: 1150 x 650 x 2000 mm Weight: 850 kg

Condition: not inspected (used), Year of construction: 1979, machine/vehicle number: 16801, functionality: unexamined, drilling depth: 180 mm, rotational speed (max.): 3,000 rpm, table width: 370 mm, table length: 500 mm, overall weight: 500 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Max. drilling depth: 180 mm Spindle speed: 25 to 3,000 rpm Table dimensions: 500 x 370 mm MACHINE DETAILS Cpedpfxeym Rnwo Aa Eew Dimensions & weight Dimensions (L x W x H): 1,200 x 600 x 1,800 mm Weight: 500 kg EQUIPMENT With two T-slots External reference: Training workshop Part 2 / 16801

Condition: not inspected (used), Year of construction: 1984, machine/vehicle number: 22499, functionality: unexamined, drilling depth: 180 mm, rotational speed (max.): 3,000 rpm, table width: 300 mm, table length: 400 mm, overall weight: 400 kg, No reserve price – guaranteed sale to the highest bidder! Submitting a bid commits you to timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Drilling depth: 180 mm Speed: 25 – 3,000 rpm Table dimensions: 400 x 300 mm MACHINE DETAILS Dimensions & Weight Codpfx Aaeym Rmts Espw Dimensions (L x W x H): 1,000 x 700 x 1,800 mm Weight: 400 kg EQUIPMENT Matching workshop cabinet Appropriate accessories for the machine External reference: Training workshop Part 2 / 22499

Condition: not inspected (used), Year of construction: 1993, machine/vehicle number: 24755, functionality: unexamined, drilling depth: 180 mm, rotational speed (max.): 3,000 rpm, table width: 300 mm, table length: 400 mm, overall weight: 400 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Cpodjym Rliopfx Aa Ejw Max. drilling depth: 180 mm Spindle speed: 25 to 3,000 rpm Table dimensions: 400 x 300 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,000 x 540 x 1,800 mm Weight: 400 kg EQUIPMENT With two T-slots External reference: Training workshop part 2 / 24755

Condition: not inspected (used), Year of construction: 1984, machine/vehicle number: 22498, functionality: unexamined, drilling depth: 180 mm, rotational speed (max.): 3,000 rpm, table width: 300 mm, table length: 400 mm, overall weight: 500 kg, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Max. drilling depth: 180 mm Spindle speed: from 25 to 3,000 rpm Table dimensions: 400 mm x 300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 860 x 600 x 1,800 mm Weight: 500 kg Cpjdpfoym Rkrex Aa Eew EQUIPMENT Table with two T-slots External reference: Training workshop part 2 / 22498

Condition: used, Year of construction: 1978, bore capacity in steel (diameter) 40 mm throat 345 mm bore stroke 200 mm table surface area 720 x 5 mm Codpfx Aaov Ehfte Espw

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, power: 5.5 kW (7.48 HP), spindle mount: MK 4, drilling depth: 235 mm, actuation type: manual, rotational speed (max.): 1,250 rpm, rotational speed (min.): 32 rpm, total width: 950 mm, total length: 1,500 mm, total height: 2,400 mm, throat depth: 390 mm, table width: 840 mm, table length: 670 mm, overall weight: 1,200 kg, thread cutting capacity: M 30, Equipment: quick-change device, Heavy-duty column drilling machine, drilling capacity Ø 60 mm, table size 840x670 mm, motor 4.0 / 5.5 kW, 16 spindle speeds 32 - 1250 rpm, quill travel 235 mm, MK-4, throat 390 mm, dimensions 950x1500x2400 mm, weight approx. 1200 kg, electric tapping device, 5 feeds, machine lamp, coolant system, depth stop, BILZ quick-change system, various accessories in cabinet. Cpsdoylyqxopfx Aa Eew

Condition: good (used), Year of construction: 1982, machine/vehicle number: 340, Offer 25032 Technical data: - Drilling capacity in steel ST 60: 50 mm Cpedpfx Aeyk Dp Nea Eew - Maximum drilling capacity in steel ST 60: 65 mm - Thread cutting device up to: M 60 - Drill spindle taper: MK 5 - Drill spindle stroke: 240 mm - Throat depth: 400 mm - Table with 2 T-slots: 720 x 560 mm - Max. distance table – drill spindle approx.: 850 mm - 4 feeds: 0.1 - 0.2 - 0.3 – 0.4 mm/rev - Feed gearbox infinitely variable with change gearbox - Spindle speeds infinitely variable: 40 - 1,600 rpm - Drive: 400 V / 5.5 kW - Space requirement approx.: W 850 x H 2,480 x D 1,350 mm - Weight approx.: 1,450 kg

Condition: good (used), Year of construction: 1978, 1 used column drilling machine Manufacturer: Alzmetall Model: AB 35 S Year of manufacture: 1978 Drilling capacity: 35 mm Spindle taper: MK 4 Automatic feed: 0.1 – 0.2 – 0.3 mm/rev Spindle speed: 65 – 1750 rpm, stepless Codpfx Aaoyhazvs Ejpw Arm reach: 300 mm Quill stroke: 160 mm Table: 620 x 470 mm Clamping surface: 500 x 370 mm Column diameter: 140 mm Mains connection: 380 Volt, 50 Hz Coolant system Required space (L x W x H): 1070 x 650 x 1880 mm Weight: 480 kg

Condition: ready for operation (used), A column drilling machine Alzmetall with a rotating round table is available. Drilling capacity steel/cast iron: 45mm/50mm, reach: 345mm, tool holder: MK4, speed: 720rpm. Machine dimensions X/Y/Z: approx. 1100mm/600mm/2000mm, weight: approx. 650kg. An on-site inspection is possible. Cpsdpfsx Hz N Tex Aa Eew

Condition: good (used), Year of construction: 1977, machine/vehicle number: 1314, Radial Drilling Machine ALZMETALL - AB 30 R Arm reach: 800 mm Spindle taper: MK 4 Drilling capacity in steel: 45 mm Cpedjyhbq Sjpfx Aa Esw Thread cutting device - up to M30 Spindle stroke: 160 mm Spindle speeds: 8 steps, 56 to 1,250 rpm Thread cutting steps: 4 - 0.15 / 0.2 / 0.3 / 0.35 mm/rev Clamping cube with T-slots: 550 x 480 x H - 500 mm Machine vice on rotary table - jaw width: 200 mm Space requirements: 1,600 x 700 x H - 2,250 mm Weight: 1,370 kg

Condition: good (used), Year of construction: 1977, machine/vehicle number: 1314, Radial Drilling Machine ALZMETALL - AB 30 R Arm reach: 800 mm Spindle taper: MK 4 Drilling capacity in steel: 45 mm Thread cutting device - up to M30 Spindle stroke: 160 mm Spindle speeds: 8 steps, 56 to 1,250 rpm Thread cutting steps: 4 - 0.15 / 0.2 / 0.3 / 0.35 mm/rev Clamping cube with T-slots: 550 x 480 x H - 500 mm Machine vice on rotary table - jaw width: 200 mm Space requirements: 1,600 x 700 x H - 2,250 mm Codpfxoyhbnks Aa Ejpw Weight: 1,370 kg

Condition: used, Year of construction: 1980, taper MK 4 serial number 520 Csdpfx Aaow Sydls Espw weight of the machine ca. 440 kg

Condition: used, Year of construction: 1980, ja feed 80 - 800 m/min 1848 weight of the machine ca. 2,2 t +++++ Please note: Cpsdpfx Asix Rdmja Esw The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, Year of construction: 2024, ALZMETALL column drilling machine AB 34 iTRONIC drilling capacity in steel 34mm, spindle speed: 100-1800 rpm, Short spindle MK4, spindle stroke: 160mm, throat depth: 300mm, column diameter: 145mm, machine table usable support: 615x430mm, with T-slots 2 x 14mm x 224mm, distance spindle-table min. / max. 138/688mm, machine table height adjustment via hand crank, feeds 0.1-0.2-0.3-0.4 mm/rev, machine height without options: 1865mm, net weight: 470 kg. Standard equipment: 7" TFT LCD display with touch function Thread cutting device Infinitely variable speed adjustment Spindle protection Three separate buttons for clockwise rotation - counterclockwise rotation - stop Mushroom push button Main switch Clockwise and counterclockwise rotation Control voltage 24 Volt Protection class IP 54 Motor insulation class "F" (155°) Electromagnetic feed overload protection Machine oil initial filling Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black Cpodoiqyixjpfx Aa Eew incl. the following options: LED machine light Pos. 12. Coolant system A Pos. 24 Foot switch for thread cutting Pos. 20.5 Delivery time: ex stock Waiblingen Beinstein The machine can be viewed at our premises by prior arrangement.

Condition: good (used), Column drilling machine ALZMETALL AB 3 ES from training facility - Well-maintained original condition - Drilling capacity / steel: 35 mm - Throat depth: 280 mm - Table size: 600x470 mm - Drilling stroke: 180 mm - Morse taper MK 3 - Infinitely variable speed control - Drill depth stop - Speed display - Drill chuck - Documentation Dimensions: Csdpfxeycv Tde Aa Eopw LxWxH 1.2x0.8x2 meters / Weight 450 kg Errors and omissions excepted.

Condition: like new (used), functionality: fully functional, drilling capacity: 50 mm, As-new machine in particularly robust box frame design. Offered at a price reflecting its condition. Please, no private enquiries! Cpjdpfx Aajycttue Eow

Condition: used, bore capacity in steel (diameter) 35 mm throat 280 mm bore stroke 180 mm 3 speeds 65 - 1750 U/min table-size 600 x 470 mm total power requirement 1,6 kW weight 450 kg dimensions 1200 x 800 x 2200 mm Features: - Automatic feed - Coolant device - Infinitely variable speed control - Adjustable fixed depth stop - Machine light - Drill chuck Cpjdpfx Aaewzmt Tj Esw

Condition: used, bore capacity in steel (diameter) 45 mm throat 350 mm bore stroke 180 mm 4 speeds 30 - 765 U/min table-size 720 x 560 mm total power requirement 3,4 kW weight 950 kg dimensions 1200 x 800 x 2300 mm Features: - Automatic feed - Coolant system - Infinitely variable speed control - Adjustable fixed depth stop - Emergency stop foot switch - Drill chuck Codpsvuz Tvjfx Aa Eepw

Condition: new, bore capacity in steel (diameter) 60.0 mm threading M 42 throat 350 mm bore stroke 200 mm turning speeds 60 - 1530 U/min table: 720 x 510 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 200 mm feed 0.15-0.2-0.3-0.36 mm/U distance spindle /table 159 / 884 mm engine output 3.6 / 4.3 kW weight 605 kg Machine height 1950 mm Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed levels 0.15 / 02, - 0.3 - 0.36 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate including special equipment: Csdpfx Aaexabgij Ejpw - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 - LED machine light pos. 12.

Condition: new, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 50.0 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 615 x 430 mm threading 24 in ST M threading 30 in GG M Cpjdpfsxaa R Hex Aa Esw turning speeds 100 - 1.800 U/min feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm total power requirement 0.6 / 1.8 kW weight 470 kg height of the machine 1865 m Furnishing: - Electromagnetic feed clutch - with overload protection and electrical cross-handle switch - Lockable main switch - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Spindle protection with electrical fuse - Motor insulation class "F" (155 degrees) - Operating instructions in German including special equipment: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED display)

Condition: new, bore capacity in steel (diameter) 50.0 mm throat 300 mm bore stroke 160 mm threading M 30 turning speeds 100 - 1600 U/min table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm engine output 1.8 / 2.9 kW weight 450 kg Machine height 1865 mm Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed rates 0.1-0.2-0.3-0.4 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate - Motor 1.8 / 2.9 KW - 100 - 1600 rpm. Special accessories included: - LED machine light pos. 12. - Thread cutting device pos. 20.0 Cpodpfxjxabq Is Aa Eew (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED display)