Used Briquette Press Log Splitter for sale (14,292)

Year of construction: 2001, condition: ready for operation (used), Press force: 16t, Feed opening dimensions X/Y: 1100mm/590mm, Chamber dimensions X/Y/Z: 1100mm/700mm/1130mm, Bale dimensions X/Y/Z: 1100mm/700mm/950mm, Max. bale weight: 200kg, Tying: 4-way vertical, Throughput: approx. 4-8 bales/h, Machine dimensions X/Y/Z: approx. 1450mm/950mm/2400mm, Weight: approx. 950kg. No UVV inspection and the hydraulic oil has been drained. The baler has not been cleaned. An on-site inspection is possible. Podpfx Ahezp Rhbscera

Year of construction: 1997, condition: ready for operation (used), A transfer press line is offered, consisting of a Gräbener double-column transfer press including a feed unit and a Fecker decoiler-straightener combination with strip feed. 1) Gräbener GSET 2-250-280-315 double-column transfer press, year of manufacture: 1997, condition: operational, nominal force: 2500kN, nominal force stroke: 5mm, nominal energy capacity: 45kJ, slide stroke: 315mm, max. stroke rate: 50strokes/min, slide adjustment: 125mm, number of connecting rods: 2, shut height between bolster and slide: 800mm, bolster dimensions X/Y/Z: 2800mm/1150mm/200mm, slide area X/Y: 2800mm/900mm, max. die cushion stroke: 160mm, die cushion force: 88kN, machine dimensions X/Y/Z: approx. 5200mm/2700mm/5450mm, dimensions including sound enclosure X/Y/Z: approx. 7200mm/4700mm/5610mm, weight: approx. 55000kg. 2) Feed unit, condition: partially operational. 3) Fecker decoiler-straightener combination with strip feed, max. load capacity: 3000kg, max. coil outside diameter: approx. 1500mm, strip pass line height: approx. 1240mm, overall height: approx. 2740mm, width of the decoiler section: approx. 1680mm, length of the strip transfer table: approx. 3500mm. Documentation available. Inspection possible by arrangement. Pjdpfx Ahjzrhhqecera

Year of construction: 2008, condition: ready for operation (used), Offered for sale is a Kern Kraft chamber filter press. Max. filtration capacity: 2000l/24h, number of filter plates: 10 standard, expandable to 20, filter area range: 3.9m²-8m², chamber volume: approx. 40l. Equipped with plates and cloths, pressure switch, stainless steel filter cake tray and stainless steel piping, expansion tank, check valve and automatic shutdown, pump and candle filter housing with filter cartridge and control cabinet. Dimensions X/Y/Z: 2500mm/1000mm/1800mm, weight: approx. 630kg. An on-site inspection is possible. Prjdpfoztzqnex Ahcea

Condition: ready for operation (used), Year of construction: 2010, An Inotec spindle press for rolling and forming sheet metal bodies of various sizes is available. Safety distance: 350mm, max. product diameter: 350mm, control system: PLC, weight: approx. 1800kg. Including pressure plate magazine and various tool sets. Documentation available. An on-site inspection is possible. Prodpfxozbuvhj Ahcsa

Condition: good (used), functionality: fully functional, B&Z sorting and cut-to-length trailer. Track gauge 1.90 m. Equipped with a Stihl HF 121 saw. Surveying system. Alpha cut-to-length system. Jonsereds crane. Hultins grapple. Prodpfozumx Hox Ahcea From a small business, manufactured in 1986 / overhauled in 1998. 25,000 operating hours. Also interesting for firewood producers.

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Pedpfxevvkmbo Ahcjra Storage location: Nattheim

Condition: used, 1 Color Press Heidelberg GTO46+ N+P in good Condition.   1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press Heidelberg GTO46+ N+P Year 1989 - Serial-No. 698328 Size max. 140 x 180 / 320 x 460 mms Dampening System VARN Compac Plus Version with Numbering and Perforation unit N+P Paperweight: 0.04 - 0.4 mms Speed: 3.000 - 8.000 sh/hr Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Podeylycnspfx Ahcsra On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Bündelpresse / Bundle Press SPLEK SL 82B-300 Baujahr / Year 1996 - Serial-No. 1589 Pressplattengrösse  / Press Plate Size max. 220mm (high) x 330mm (width) Einsatzlänge / Insert length 770mm Stapel Presskraft maximal 20KN Geeignet zum Pressen und Bündeln von gefalzten Bogen, Broschüren, Buchblocks sowie Kartonagen. For Pressing and Bundling of Folded Sheets, Brochures, Book bBlocks and cardboards. Pjdpfx Ahow Nhc Rocjra Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Altinisik Makina 1020 Flexographic Printer Prjdpfx Aszlahvehcea The machine is fully operational and ready for production. Like-new condition. Made in Turkey. Max sheet size: 1020 x 2400 mm Min sheet size: 300 x 700 mm Speed: 7000 sheets/h Vacuum feeder

Condition: good (used), Cauhe S-IV A 120×160 Hot Stamping Press The machine is fully operational, like new. Made in Spain. Format: 1200x1600mm Podpfx Aozlaitjhcsra Weight: 10,000kg Power supply: 380V Motor: 11 kW Impact force: 2 Tm/dm² Equipment: – Pneumatic clutch and brake – Control panel – Full-format heating plate with 3 heating sections – 3 operating modes: continuous, time-delayed, manual – 3 independent foil feeds – Central automatic lubrication – Additional safety guards – Operating tools – Press plate

Condition: ready for operation (used), Year of construction: 1999, operating hours: 50,702 h, functionality: fully functional, Baling press Paal Konti 325 D/SO, year of manufacture 1999 Technical data: Manufacturer: Paal Type: Paal Konti 325 D/SO Year of manufacture: 1999 Operating hours: 50,702 Pressing force: 94 t Drive power: 2 x 45 kW Total connected load: 104 kW Feed opening: 1020 x 1750 mm Prsdpfozk Aluox Ahcea Bale dimensions: 750 x 1100 mm, length variable Tying: 4-wire automatic Throughput at: 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight: 525 to 800 kg Transport dimensions: approx. 12352 x 2340 x 2800 mm (LxWxH) Machine weight: approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste The press is in good working order and has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. This offer is subject to change, prior sale is reserved, and it can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: used, Year of construction: 1980, pressure 25 t no. of strokes 1500 Hub/min total power requirement 20 kW Pedpfx Ahsvu E Iqscjra

Condition: used, große Hydraulische Presse - big Hydraulic Press Lechner ST USTIA Baujahr / Year 1980 - Serial-No. 1438 1 Pressplatte / 1 pressure plate Size with max. 800 x 800mm Stapelhöhe / Stack height max. 800mm Druck stufenlos regelbar / Pressure steppless Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Prjdpfxswgd S Ds Ahcea On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Schließrahmen - Frame SBB Letter Press HeidelbergSBB - 560 x 820mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Pedpfxsrffm Ns Ahcsra

Condition: used, machine/vehicle number: 24118, Kniehebelprägepresse - Embossing Stamping Press Krause KHP Prägefläche / Stamping size: 350 x 400 mm Sehr guter Zustand / Beautiful condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Predpeut Tkgsfx Ahcja

Condition: used, Year of construction: 1984, pressure 500 t Prjdpfjt Hwpyjx Ahcsa passage width 750 mm stroke 120 mm total power requirement 57 kW weight of the machine ca. 16 t dimensions of the machine ca. m

Condition: used, Year of construction: 1987, pressure 125 t distance between columns 1050 mm stroke 250 mm Prodpfx Ahet Hwuiecsa total power requirement 40 kW weight of the machine ca. 8,5 t dimensions of the machine ca. m

Condition: used, Year of construction: 1990, pressure 3 t throat 0 mm Podpfx Ajt Hw Amohcera stroke 200 mm total power requirement 15 kW weight of the machine ca. 4 t dimensions of the machine ca. m Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts)

Condition: used, Year of construction: 1976, wire diameter: 3,0 - 5,5 mm nail length: 15 - 80 (100) mm output: 300 St./min. Psdskk Exepfx Ahcera

Condition: used, Year of construction: 1999, machine/vehicle number: 990418402, Schuppenauslage mit integrierter Presse / Stream delivery with integrated pressing MBO ASP 82 - 2 MEBaujahr / Year 1999 - Serial-No. 990418402 Arbeitsbreite / Working width max. 820mm Geschwindigkeit / Speed min. 30m/min. - max. 160m/min. Einlaufhöhe / Infeed high min. 400mm - max. 950mm Stream delivery with integrated pressing rollersBeschreibung / Description: Prjdpfx Aoih Nl Rohcsa Fahrbar / Mobile Built-in controller Spreizen von Mehrfachnutzenströmen / Spreading Marking by 2 cm shifting Light barrier and counter ASP 82-2 ME extension to four-up production Integrierte Presse / Integrated pressing station Kontinuierlicher Schuppenstrom / Continuous stream delivery Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2023, Immediately available, highly upgraded CNC press brake YAWEI PBH220/4100-7C - Pressing force: 2200KN - max. bending length: 4100mm Predpfxjqgcq Ho Ahcoa - Year of construction 2023 - CNC controlled hydraulic crowning - Cybelec VISITOUCH 19T control - 7 CNC controlled axes - Y1/Y2, X, R, Z1 + Z2, X1 (Delta X) - Mechanical quick clamping upper tools type Amada - 60mm table with 13.5mm x 22mm groove for insertion dies - 2 front support arms can be moved on linear guides - CE with Fiessler AKAS IIF (automatic height adjustment) - 24 month guarantee - Commissioning, training

Condition: used, 1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press HAMADA 500 CDASerial-No. HR-6462 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Prsdpeh Aw Ucsfx Ahcsa

Condition: used, Year of construction: 1966, machine/vehicle number: 155017, Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHTYear 1966 - Serial-No. 155017 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mmKomplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video Psdpfoh Axiqex Ahcjra We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1988, machine/vehicle number: 26184, Presstation / Press station Stahl PS 46Year 1988 - Serial-No. 26184 Arbeitsbreite / Working width max. 460mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Pjdpfeh Axlhox Ahcsra Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, press power: max. 630 to. daylight: max. 375 mm Prodpfegwv S Uox Ahcea stroke: max. 275 mm weight: 4.500 Kg.