Used Sack Vacuum Press for sale (29,076)

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, press power: max. 630 to. daylight: max. 375 mm stroke: max. 275 mm weight: 4.500 Kg. Gisdpfx Asgwv S Uogbol

Condition: excellent (used), Year of construction: 2015, With a view to optimized and energy-saving drives in the vehicle industry, significantly higher demands are placed on the components of the drive system. Higher power transmission and higher torques combined with smaller size are the challenges. This development has increased the demand for cold-formed splines. With the Vertical Splines Press (VSP) Sack & Kiesselbach provides the customer with a solution that offers technological and also logistical advantages compared to conventional technologies (such as roller burnishing or broaching). The relatively small and very user-friendly press can be configured both manually and as an automated system. In addition to the splines press, the customer can also obtain the appropriate die system and process technology from a single source. 1 used Vertical Splines Press make Sack & Kiesselbach type VSP 50/30 Year 2015 Technical data: Godpfx Aogtty Togbeil Pressing force 500KN ram stroke 450 mm Closing speed 200 mm/s pressing speed 5,5 mm/s opening speed 120 mm/s table dimension 500 x 400 mm installation height 1000mm width between columns 530 mm splines cylinder speed 3-9,5 mm/s Dimensions height 2900 mm width 3100 mm depth 1400 mm Drive power 8 KW Special equipment Digital measuring system Splines tool for internal splines

Condition: good (used), pressing force: 1,250 t, Pressing force: max. 1250 t Gisdpsx Nn Tqofx Agbol Width: 585 mm. height max. 480 mm. Stroke: max. 355 mm. Weight: 7200 kg.

Condition: used, Year of construction: 1979, pressure 18 t diameter 250 mm stroke 150 mm Gedpfsvzxp Isx Agbjil distance between columns 210 mm max. distance table - ram 400 mm power capacity 5,5 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 1,0 x 1,0 x 1,8 m hydraulic die-hob press with oil-hydraulic drive, controllable dependent on pressure/time as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Gsdpfxjhfwqzj Agbeil Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: excellent (used), Year of construction: 1983, pressure 630 t diameter 320 mm stroke 310 mm Gijdpexvdr Hsfx Agbsl weight of the machine ca. 3500 t

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, press force: max. 1.250 to. daylight: max. 480 mm Gedpfjwuutbjx Agbeil width: 585 mm stroke: max. 355 mm weight: 7.200 Kg.

Condition: good (used), Year of construction: 1971, pressing force: 630 t, Manufacturer: Sack & Kiesselbach Model: EP 630 Mode of operation: oil-hydraulic Table height: 1175 mm Gedpfxowxw Ame Agboil Stroke: 305 mm Tool installation height: 317 mm Rapid approach descending speed: 6.9 mm/s Pressing speed: 0.3 mm/s Return speed: 6.3 mm/s Drive power: 11 kW Electrics: 550 V / 60 Hz Information without guarantee.

Condition: used, Year of construction: 1955, functionality: fully functional, machine/vehicle number: M42L/8940, Offer Number: M42L/8940 Machinetype: hobbing press Make: SACK & KIESSELBACH Type: 1000 Constr. year: 1955 press power: 1000 to clear width: 585 mm Gedpfxewi Tdbo Agboil daylight: 410 mm stroke: 380 mm table size: 0/ 700 mm Location: In our warehouse

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40 Gedpfx Agshtaaqsbsil

Condition: good (used), 1 used single-sided press Make: SACK & KIESSELBACH, year of construction: 1962,74 Giodpfx Ajul U Svogbjl serial number 31900 Pressing force 630 t, stroke 310 mm Installation height 320 mm Working height 1200 mm Drive power 10 KW

Condition: used, Year of construction: 1952, Type of machine: Down-stroking press Manufacturer: SACK&KIESSELBACH Model: EP500 Year of construction: 1952 Pressing force: 500 t Giedpfx Agswxw H Esbsl Clear gap: 450 mm Location: In Germany

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 65020107, Equipment: documentation/manual, Good day. Thank you for visiting my listing. My profession is picture framing. Among other equipment, I have used a laminating press for my work. A few years ago, I retired, but I still continue with framing to some extent. However, as the amount of work has decreased, I have decided to sell machines that I no longer need. One of them is the Biedermann BVP 65 vacuum laminating press, model E/380, with a working area of 115x175 cm. Most of the time I used it for laminating posters, which I then framed. However, it can also be used to laminate prints, drawings, photographs, silk, and batik. The image is mounted in the machine with heat and pressure onto cardboard or MDF. At the same time, the lamination film is adhered to the picture. The finished product is thus protected not only against soiling but also against UV radiation, and it is very lightweight. It is not necessary to use glass when framing. The lamination surface can be smooth or textured with a canvas effect. Pictures with a coarse texture look as if they are painted on canvas. The price includes various lamination films – see photos. The vacuum press is in good technical condition. Thank you for your response and have a nice day. Gisdpex Dq A Iefx Agbol

Condition: good (used), Inexpensive from Swiss liquidation Gedpfx Aoukunnjgboil

Year of construction: 2026, condition: new, Vacuum membrane press VPR-3500 is a universal Press for the wood processing and thermoforming. The VPR-3500 press is also adjustable and mobile. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components Vakkumsystem: work surface with vacuum channels for a uniform Unterdruckauch for large workpieces. Becker Vakkumpumpe / oil free / tank capacity 100 l Work surface: 3500x1500mm Pump output: KW 0.75 Vacuum pump flow rate: 40 m3/h Rubber membrane Dimensions exterior: 3600 x 1650 x 1000 mm Weight: 400 kg Location: Off the shelf 54634 Bitburg -free load- Gisdpod Ecc Tefx Agbsl

Condition: excellent (used), Catalogue no.: 7815 TECHNICAL DATA Worktable dimensions (L/W): 2900x1200mm Overall table dimensions: 3000x1300mm Operating temperature: ±40-60°C Maximum temperature: ±60°C Total machine power: 5.25kW Vacuum pump power: 0.90kW Vacuum pump capacity: approx. 25/30m3/h Noise level: approx. 70dB Gsdpfxsxwygce Agbjil Dimensions (L/W/H): 3060x1400x1400mm Weight: 360kg – DTR Documentation – Unpainted – Very good condition – Used press Net price: 21,900 PLN Net price: 5,200 EUR depending on the exchange rate of 4.2 EUR (Prices may change with higher fluctuations)

Year of construction: 1986, condition: excellent (used), We are offering this very well-maintained Elkom U6s thermo vacuum press, year of manufacture 1986. Manufacturer: Elkom Model: U6s Giodox N Na Espfx Agbjl Year of manufacture: 1986 Condition: Very good Machine type: Thermo vacuum press If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2012, condition: excellent (used), COLUMBUS Vacuform Standard High-performance vacuum pump BECKER Gedpoxgg Tbjfx Agbjil Vacuum tank 200 l Digital pressure regulation Digital vacuum gauge Highly elastic natural rubber membrane Sturdy worktable Swivel castors with brakes Working dimensions approx. L x W 2900 x 1300 mm Pressing pressure max. 0.85 kg/cm2 = approx. 29 t Connected load 0.75 kW, 400 V 50 Hz Tank capacity 200 l CE Transport dimensions approx. L x W 3100 x 1550 mm Weight approx. 400 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vacuum membrane press ARTEX VPS - 300 350x150 TECHNICAL DATA - dimensions of working table length/width 3500x1500mm - working temperature ±40-60°C - maximum temperature ±80°C - additional heating with air - power of heaters - 3×1,5kW 4,5kW - power of vacuum pump 0,75kW - capacity of vacuum pump 25m3/h - noise level 67dB Gjdpfxstp Td Ts Agbsil - dimensions L/W/H 3900x1800x1400mm - weight about 550kg

Year of construction: 2013, condition: good (used), functionality: fully functional, For coating / lamination of curved and contoured workpieces Press frame internal dimensions: 2,880 x 1,280 mm Vacuum pump: 25 m³ with vacuum buffer tank Gjdpfxox Dayie Agbeil Movable on castors Tilting press table Vacuum pump motor: 0.75 kW Vacuum regulator with digital display

Year of construction: 2026, condition: as good as new (ex-display), Vacuum - membrane press VP - series are the ideal solution for the wood processing industry. VP 3000 is equipped with heating technology, which reduces the drying time of the adhesive so that the performance is higher. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components The heating system is equipped with temperature control Rubber membrane 2.5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of vacuum / Tankinhalr 15 l Work surface: 3000x1500mm Heating system temperature: Max 60 degrees C Heating system: KW 4,5 Pump output: KW 0.75 Vacuum pump capacity: 25 m3/h Gijdedvltyopfx Agbsl Rubber membrane Dimensions exterior: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Off the shelf 54634 Bitburg -free load-

Year of construction: 1999, condition: used, Technical details: Press area: 2350 x 1300mm Dimensions (LxWxH) approx: 4200 x 3200 x 2400mm Weight approx: 8000kg Item Description: Gedpfx Aof D Aq Aegbjil Machine number 99-0211, equipped with a sliding table 2350 x 1300mm, workpiece dimensions max. 2100 x 1100mm, workpiece thickness max. 38mm, control with touchscreen.

Condition: new, power: 324 kW (440.52 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: orange, gearing type: mechanical, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ A powerful Naaktgeboren industrial vacuum truck with Vacu-Press 10,000, HI-LIFT, stainless steel tank, complete remote control, extensive lighting, and a comprehensive list of accessories. Ideal for companies requiring high suction power, efficient BigBag operation, and robust quality. Technical Highlights 1. Pump Unit ? Vacu-Press 10,000 ? air-cooled 3-lobe rotary piston blower ? Capacity: 8,220 m³/h (no-load) ? Vacuum: 0.95 bar (0.05 bar abs.) at 100°C ? Overpressure: 1.20 bar (2.20 bar abs.) at 125°C ? Maximum power consumption: 190 kW ? Extremely high suction, ideal for heavy industrial applications. 2. Sound Insulation ? Completely sound-insulated pump housing ? Stainless steel interior lining ? Inlet, cooling, and exhaust mufflers ? Noise level: approx. 80 dB(A) ? Quiet operation despite extreme performance. 3. Stainless Steel Tank ? Load volume: 13.0 m³ ? Filter chamber: 2.0 m³ ? Total volume: 15.0 m³ ? Wall thickness: 6 mm stainless steel ? Design pressure: full vacuum up to 2 bar overpressure ? Temperature range: -20°C to +50°C ? Filter chamber at the front, fully openable lid ? Discharge via large oval, waterproof and pressure-resistant flap 4. HI-LIFT Version ? Liftable tank for BigBags, skips, containers ? Sack discharge height under slide valve: approx. 1,600 mm (with tilted tank) ? Lifting cylinder hydraulic, double-acting ? Lift: 1,070 mm ? DN300 pneumatic slide valve 5. Filter System ? Cylindrical filter chamber Ø 1,800 mm ? Separation efficiency: 99.95% ? Filter material: BIA class C ? Suitable for fine dusts and demanding industrial vacuuming tasks. 6. Suction and Blowing Connectors ? Suction port: DN150, large internal deflection elbow, replaceable wear plate ? Blowing port: DN125 ? Hose couplings selectable 7. Rear Lid & Body ? Hydraulically operated ? Internal cone + blowing connection ? Hydraulic lock with self-adjusting wedge closure ? Chassis: MAN TGS 41.440 BB ? Stainless steel toolboxes (V2A) ? Storage boxes left & rear ? Galvanized fenders ? Continuous tipping axle ? OMSI transfer case for optimal pump speed ? low consumption, long service life 8. Control System Operation: electric (relay control) Functions: ? Main switch ? Work lights on/off ? Beacon lights on/off ? Selection suction/blowing ? Start/stop units ? Blowing start also via separate switch at rear right Signal indicators: ? Blower oil pressure ? Blower oil temperature ? Work light ? Beacon light ? Cooling air flap ? Free suction flap ? Blowing flap Instruments: ? Vacuum gauge Accessories (included) * Speck water pump 701/140B + approx. 1,000-liter water tank + 40-m spray hose reel * Paint: RAL 2004 * IFM liquid level sensor Gedpewqblpefx Agbjil * 6 work lights (2 left, 2 right, 2 rear) with changeover switch * Hetronic remote control: ? Suction arm ? Suction start/stop ? Speed +/– ? Water pump on/off ? BigBag slide valve open/close * 5" Perrot suction & blowing couplings (male) * Fire extinguisher * 4 beacon lights (2 cab, 2 body) * Full-length left-side hose compartment * Rear axle storage box * Storage box under front silencer * 42 additional filter bags For more detailed information and/or photos, please contact us directly. A large selection of additional vehicles for PURCHASE or RENT can be found at: Subject to change, prior sale, and errors excepted. The buyer is obligat

Condition: like new (used), Year of construction: 2025, operating hours: 900 h, functionality: fully functional, machine/vehicle number: M-06 1292 5014 25, total height: 2,150 mm, total length: 1,700 mm, total width: 5,250 mm, table width: 5,000 mm, table length: 1,420 mm, table load: 200 kg, overall weight: 680 kg, We are offering the vacuum press with integrated pressing time control and MAX-CONTROL PLC control system for sale. Transport and any costs incurred as a result, such as customs clearance, are the responsibility of the buyer. Gisdoxy Sdfspfx Agbjl

Year of construction: 2026, condition: as good as new (ex-display), Vacuum - membrane press VP - Series are the optimal solution for woodworking. VP 3000 is equipped with the heating technology, which shortens the drying time of the glue, so that the efficiency is higher. Possible applications: Veneer / form gluing / wrapping... Coating of different profiles (veneer,paper, plastic...) Wood bending: production of bent and layer-glued components The heating system is equipped with temperature control Rubber membrane 2,5 mm Table top is made of plastic 12 mm Giodpfx Asdwh E Asgbjl Oil-free Becker vacuum pump 25 m3/h The control system of the vacuum / tank capacity 15 l working area: 3000x1500mm Heating system temperature: Max. 60 degrees C heating system: KW 4,5 Pump capacity: KW 0,75 Vacuum pump flow rate: 25 m3/h Rubber membrane Dimensions outside: 3100 x 1650 x 1600 mm Weight: 450 kg Machine is equipped with a chassis. Location: From warehouse 54634 Bitburg - free on truck -