Used Briqueting Press for sale (12,523)

Condition: reconditioned (used), Year of construction: 2023, All wear parts new only 704 operating hours Special price for a low-hour demonstration unit Dkjdpfx Acsd N Dnhj Noh Base machine: €29,990 net Optional extras (for an additional charge): - Cooling unit: €3,995 net - Emulsion tray: €3,990 net The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality during continuous operation. The pressing process does not require any binding agents – compaction is achieved solely through hydraulic pressing force. Depending on material, the feedstock volume can be reduced by up to 90%. Throughput capacity: maximum 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 liters Maximum briquette length: 50 mm Optimal briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 liters Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Feed material requirements: - Max. chip length: 15 mm - Installation room temperature: heated space, at least +5°C - Max. load on agitator: 150 kg - Feed material must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Condition: as good as new (ex-display), Year of construction: 2025, Special price for trade faire machine *available upon request New: With the frequency converter option, up to a maximum of 45% eligible for state funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *both individual machines manufactured and in stock, only need to be connected to each other 1. Technical Data Briquetting Press: Our best-selling briquetting press, the classic. + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Customs tariff number: 84793010 Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max.: 40 mm Briquette stroke opt.: 40 mm Throughput rate (depending on material): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter . Dkodpfx Aced Su Hxe Noh Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Footprint total system: 2.2x1.1x2.8 m LxWxH Height - 2.8 m (special container) Delivery possible in 2 components Weight: approx. 1200 kg, Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Press tongs cooling option: no Hydraulic oil cooling option: yes Filling level monitoring option: yes CE compliant 2. Technical Data Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle left (when standing in front of the dust bin) Residual dust:

Condition: good (used), Used machine, good condition. Delivery time appr. 16 weeks after ordering Basic machine starts at 139.700 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Dkedpfjfmqq Esx Ac Noh Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: new, Year of construction: 2026, Production time of the machine approx. 3.5 months Very robust machine with high pressing force - is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to faults + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later) * cools the press tongs (important from 3.5 hours) and the hydraulic oil Dedpfxeffh Atj Ac Nokh * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compressor chamber + € 1,975 net recommended for light starting materials such as wood shavings Product code: 84793010 Briquette diameter: 65 mm Front bush: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Output (depending on material): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 qbm Pump: 37 liters Hydraulic pre-compressor Cooling press tongs option: yes, with special accessory Coolable press tongs Cooling of the pressing tongs via water tank (to be procured on site) Hydraulic oil cooling option: yes Fill level monitoring option: yes Briquette option: yes (depending on material) CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18 % - Chip length maximum 15 mm - Installation temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Condition: good (used), Refurbished machine Basic machine starts at a price of 147.700 € net *Options at additional cost, see below with a full 1 year warranty Ready for delivery approx. 16 weeks after ordering Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control Djdpfx Ae E Dqusc Nskh € 7.850 net Oil heater 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: like new (used), Year of construction: 2024, operating hours: 29 h, *one machine is ready for delivery and ready produced Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette sellers. Classic type - throughput up to 425 kg / h * depending on the material Options for an extra charge: Plant construction / mütek system technology: - mütek shredder MRZ shredding technology - conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary valve - screw conveyors - silos - Control links of all kinds - semi-automatic packaging technology Press: - Packing table with drawer - Top-mounted silo with discharge Your advantages: Most important point: + Very established, well-engineered die press thanks to 25 years of experience. The difficulty and the know-how lies in the detail. For example, valves and cylinder seals of the highest quality. + 24h operation possible + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics Technical data briquetting press: Throughput: up to 425 kg / h * * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material. If no test material is made available to us, we cannot make any statements about the briquette quality and throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Main hydraulic compressor Pressing pressure: up to approx. 1700 kg / cm² Hydraulic system with 260 liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 ph Manual operation of all cylinders "Dustproof" switch cabinet with PLC control and touch display Total power consumption of the briquette press: approx. 33 KW Muxzr8 Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% Dksdpfsfhql Tex Ac Neh - Maximum chip length: 20 x 2 x 2 mm - temperature where machine is placed + 8 degrees - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear.

Condition: as good as new (ex-display), Year of construction: 2010, Capacity 180 - 300 kg/h Diameter of the briquets 50 mm 0,3 m³ lubrication pump 1,0 kW Dkedpfexy S E Nsx Ac Neh engine output 15 kW

Condition: ready for operation (used), Year of construction: 2001, operating hours: 56,927 h, functionality: fully functional, Manufacturer: ATM Recyclingsystems GmbH Model: ArnoBrik 15 Year of manufacture: 2001 Briquette diameter: 150 mm Technical Data Briquette diameter: 140 or 150 mm Capacity: - Cast iron chips: 4.8 – 5.3 t/h Dkodexy E H Hspfx Ac Neh - Steel chips: 4 – 5 t/h - Mixed briquetting: 4 – 5 t/h - Aluminium chips: 1.6 – 1.8 t/h Mixed briquetting: 4 – 4.5 t/h Tyre wire: 2.5 – 3 t/h Hourly throughput depending on material Briquette density for steel and cast iron: 5.5 kg/dm³ Operating pressure: 300 bar Required space (L x W x H): 13,500 x 6,500 x 2,000 mm Machine weight: 30 t Main cylinder force: 5,300 kN Oil requirement: 2,800 litres Main drive: 4 x 30 kW Connected load including ancillary equipment: approx. 150 kW Briquette height: 110 - 140 mm Briquette weight – depending on material: approx. 10 - 16 kg Cycle time: approx. 10 sec

Condition: ready for operation (used), Year of construction: 2014, operating hours: 7,822 h, functionality: fully functional, Manufacturer: ATM Type: ArnoBrik 10 Year of manufacture: 2014 Briquette diameter: 105 mm Technical Data Main Dimensions Length x Width x Height: 4,250 x 3,600 x 2,200 mm Weight approx.: 10 t Briquette diameter: 105 mm Briquette height depending on material: approx. 60 - 120 mm Performance Data Cycle time: 10 sec. Hourly capacity: - Aluminium: 850 - 1,060 kg/h Dksdpfxoxy E Eve Ac Neh - Steel, cast: 1,800 – 2,000 kg/h - Nickel: 1,800 – 2,000 kg/h Briquette weight (aluminium): 2.0 – 2.5 kg Briquette density (steel, cast): 5.5 kg/dm³ Briquette density (aluminium): 2.2 – 2.5 kg/dm³ Hydraulic System Number of power-regulated axial piston pumps: 2 units Power requirement per pump unit: 30 kW Operating pressure: 300 bar Hydraulic tank volume: 1,300 l Electrical Equipment Drive power: 70 kW Control voltage: 24 V DC Operating voltage: 3 x 400 V / 50 Hz

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 109, briquette diameter: 80 mm, overall weight: 1,450 kg, TECHNICAL DETAILS Briquette type Briquette diameter: 80 mm Motor power: 11 kW Production output: 80 - 210 kg/h Machine performance Cycles per minute: 7 Number of cylinders: 3 Max. discharge length: 70 mm Container Ring diameter: 1,200 mm Container capacity: 1 m³ MACHINE DETAILS Dimensions and Weight Dimensions (L x W x H): 2,100 x 1,350 x 1,600 mm Weight: 1,450 kg Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. material moisture: 15 % EQUIPMENT Hydraulic oil machine Monoblock clamping system Capacitive sensor for automatic operation Viewing window End-of-cycle system Electronic pressure gauges for pump and clamping pressure Siemens touchscreen PLC Siemens display Operating hours counter Inductive limit switches LED machine position indicator Stamping unit Preheating system Oil level and temperature sensor Preparation for oil cooling in tank and material outlet Power stabilizer Dkodpfsxyi Ihex Ac Njh Service tools

Condition: good (used), Year of construction: 2009, operating hours: 37,500 h, functionality: fully functional, machine/vehicle number: 1653, total width: 2,000 mm, total height: 2,100 mm, total length: 3,000 mm, overall weight: 5,500 kg, Hydraulic system: - Power-regulated axial piston double pump  Maximum operating pressure: 300 bar  Drive motor: 55 kW, 400 V, 50 Hz, 3-phase AC, 1,500 rpm  Motor designed as an energy-efficient motor, efficiency class EFF1  Protection class: IP 54 - Valve voltage: 24 Volt DC - Hydraulic tank (950 liters) with additional cooling and fine filter circuit, 5µm filter unit, drive 2.2 kW - Large double return filter integrated in the tank, 10µm filter unit - Hydraulic tank integrated into the supporting frame Electrical configuration: - Machine control cabinet according to DIN EN60204-VDE 0113, protection class IP 54 - Input voltage: 400 Volt, 50 Hz - With lockable main switch inside the enclosure - Emergency stop button in the control cabinet - Control voltage: 24 Volt DC - Freely programmable control (PLC) SIEMENS S7-200 - with Siemens TP 177B operation and display panel  Display and modify operational states and values  Perform operations  Display error messages - Automatic start/stop via light barrier integrated in the feed hopper - All initiators with contactless switching - Gear motors and pump motor with thermal winding protection contacts Material feed: - Feed hopper with fill opening of 800 x 400 mm - Robust sheet steel construction with reinforcements - Hopper volume approx. 150 liters - Agitator to prevent bridging, powered by 0.55 kW drive - Feed screw with 1.5 kW drive - Feed time automatically controlled by PLC Pre-compactor: Vertically arranged, hydraulically operated. - Pre-compactor pressure adjustable via TP 177B - Dust-tight control enabled by the distance measurement system developed and patented by RUF Main compactor: Horizontally arranged, hydraulically operated. - Press pressure adjustable via TP 177B up to 300 bar - Hydraulic cylinder 350, with a pressing force up to 300 tons Press output: - Depending on settings and material, up to 600 pieces per hour (approx. 800 - 1,000 kg/h) Briquette dimensions: - 240 x 70 mm - Briquette length 70 - 110 mm; depending on settings and the type and bulk density of the material to be briquetted - Max. specific pressing pressure approx. 1,776 kg/cm² Dkedpfxexxk D Us Ac Noh

Condition: good (used), Technical specifications: Briquetting press in good condition Year of manufacture: 2007 Technically inspected in 06 / 2025 Cylindrical briquette: 80 mm Throughput up to max. 150 kg/h *only approx. 3,949 operating hours - Hydraulic press: briquetting press with discharge chute - Hydraulic unit: 4 kW - Pressure: max. 300 bar - Transport dimensions: 1585/2140/H1940 mm - Weight: 1,370 kg Dksdjwtdk Tspfx Ac Njh Functional guarantee upon handover We are happy to arrange a free test run!

Condition: good (used), Year of construction: 2013, operating hours: 37,400 h, functionality: fully functional, machine/vehicle number: 2110, total width: 2,000 mm, total height: 2,100 mm, total length: 3,000 mm, overall weight: 5,500 kg, Hydraulic system: - Power-regulated axial piston double pump  Maximum operating pressure: 300 bar  Drive motor: 55 kW, 400 V, 50 Hz, 3-phase AC, 1,500 rpm  Motor designed as an energy-efficient motor, efficiency class EFF1  Protection class: IP 54 - Valve voltage: 24 Volt DC - Hydraulic tank (950 liters) with additional cooling and fine filter circuit, 5µm filter unit, drive 2.2 kW - Large double return filter integrated in the tank, 10µm filter unit - Hydraulic tank integrated into the supporting frame Electrical configuration: - Machine control cabinet according to DIN EN60204-VDE 0113, protection class IP 54 - Input voltage: 400 Volt, 50 Hz - With lockable main switch inside the enclosure - Emergency stop button in the control cabinet - Control voltage: 24 Volt DC - Freely programmable control (PLC) SIEMENS S7-200 - with Siemens TP 177B operation and display panel  Display and modify operational states and values  Perform operations  Display error messages - Automatic start/stop via light barrier integrated in the feed hopper - All initiators with contactless switching - Gear motors and pump motor with thermal winding protection contacts Material feed: - Feed hopper with fill opening of 800 x 400 mm - Robust sheet steel construction with reinforcements - Hopper volume approx. 150 liters - Agitator to prevent bridging, powered by 0.55 kW drive - Feed screw with 1.5 kW drive - Feed time automatically controlled by PLC Pre-compactor: Vertically arranged, hydraulically operated. - Pre-compactor pressure adjustable via TP 177B - Dust-tight control enabled by the distance measurement system developed and patented by RUF Main compactor: Horizontally arranged, hydraulically operated. - Press pressure adjustable via TP 177B up to 300 bar - Hydraulic cylinder 350, with a pressing force up to 300 tons Press output: - Depending on settings and material, up to 600 pieces per hour (approx. 800 - 1,000 kg/h) Briquette dimensions: - 240 x 70 mm Dsdpexwizijfx Ac Nekh - Briquette length 70 - 110 mm; depending on settings and the type and bulk density of the material to be briquetted - Max. specific pressing pressure approx. 1,776 kg/cm²

Condition: new, Year of construction: 2025, Small hydraulic briquetting press. Main motor is 4 kW, briquette diameter is 50mm. Capacity of the press is 30-50 kg/hour. The machine is new, and has CE certificate. Customer can order it with oil cooler. For more information visit our YouTube channel, webpage or Facebook site. Dkjdsfk N Tpspfx Ac Njh

Condition: good (used), Technical data: Briquetting press RUF RB 440 Press capacity when pressing wood: up to a maximum of 440 kg/hour Material moisture: maximum 15 % Motor power: approx. 30 kW Briquette size; rectangular: 150 x 60 mm Dsdpfet H D Ezjx Ac Njkh Length: 40 - 110 mm Dimensions approx. 1680 x 1800 x 2000 mm Weight: 3000 kg

Condition: good (used), Comafer Dinamic 85 Briquetting Press Motor power: 5.5 kW, Briquette diameter: 65 mm, Output: approx. 50 kg/h Dsdpfoxuq E Rsx Ac Njkh Hopper diameter: 90 cm Weight: approx. 900 kg, The machine is in working condition and can be tested before purchase.

Condition: good (used), Year of construction: 1990, still well-preserved briquetting press Hydraulic motor 5.5 kW Chip container below: 120 x 120 cm with slanted top extension (top 2 m), 85 cm high A filter top extension is available on request (for an additional charge) A smaller top extension made of wood can also be constructed Dksdpjxdlhrefx Ac Neh

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Dkedpswrp Emjfx Ac Neh Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Condition: new, 20-26-537/4 FALACH hydraulic briquetting press (new) Type CUBE 20 Briquette diameter 30 x 30 mm Press capacity 10-25 kg/hour Briquette length approx. 6-50 mm Hopper volume 0,28 m3 Pump motor input 2,2 kW Power consumption 1,1 kW/hour Required input voltage and current 3x400V, 16 A Oil cooler no Dsdexrn Uwepfx Ac Njkh Operation continuous Automatic reverse of support wheels no Automatic switching-out no Maximum percentage of moisture 15 % Specific weight of briquettes 900-1100 kg/m3 Maximum noise level 62 dB Transport dimensions 1300-740-1120 mm Weight 233 kg Price 8190 Eur (EXW Jonava, Lithuania)

Condition: new, 20-26-537/3 FALACH hydraulic briquetting press (new) Type 100 Dkedpfjxrn Ukox Ac Neh Briquette diameter 70 mm Press capacity 90 - 120 kg / hour Briquette length approx. adjustable 45 mm Hopper volume 0,75 m3 Pump motor input 11 kW Power consumption 8,2 kW/ hour Required input voltage and current 3x400V, 32 A Oil cooler yes Operation continuous Automatic reverse of support wheels yes Automatic switching-out yes Maximum percentage of moisture 15 % Specific weight of briquettes 900-1100 kg/m3 Maximum noise level 68 dB Transport dimensions 2220 - 1200 – 1510 mm Weight 810 kg Price 26 230 Eur (EXW Jonava, Lithuania)

Condition: new, 20-26-537/2 FALACH hydraulic briquetting press (new) Type 70 Briquette diameter 70 mm Press capacity 60 - 80 kg / hour Briquette length approx. 40 – 60 mm Hopper volume 0,75 m3 Pump motor input 7,5 kW Power consumption 4,9 kW/ hour Required input voltage and current 3x400V, 25 A Oil cooler no Operation continuous Automatic reverse of support wheels yes Dkodpoxrn Tgsfx Ac Njh Automatic switching-out yes Maximum percentage of moisture 15 % Specific weight of briquettes 900-1100 kg/m3 Maximum noise level 68 dB Transport dimensions 2220 - 1200 – 1510 mm Weight 840 kg Price 20 270 Eur (EXW Jonava, Lithuania)

Condition: new, 20-26-537/1 FALACH hydraulic briquetting press (new) Type 50 Briquette diameter 50mm Press capacity 40 - 60 kg / hour Briquette length approx. adjustable 35 mm Hopper volume 0.38 m3 Pump motor input 5.5 kW Power consumption 3.8 kW / hour Required input voltage and current 3x400V, 16 A Oil cooler yes Operation continuous Automatic reverse of support wheels yes Dsdpfx Acjxrn R Ee Nekh Automatic switching-out yes Maximum percentage of moisture 15 % Specific weight of briquettes 900 kg / m3 Maximum noise level 68 dB Transport dimensions 1860 - 890 - 1100 mm Weight 390 kg Price 13 030 Eur (EXW Jonava, Lithuania)

Condition: new, 20-26-537 FALACH hydraulic briquetting press (new) Type Falach 35 Briquette diameter 50mm Press capacity 25 - 40 kg / hour Briquette length approx. 20-40 mm Hopper volume 0.38 m3 Pump motor input 4 kW Power consumption 2.2 kW / hour Required input voltage 3x400V, 16 A Oil cooler no Operation continuous Automatic reverse of support wheels yes Automatic switching-out yes Maximum percentage of moisture 15 % Dsdexrn Dxspfx Ac Nokh Specific weight of briquettes 900 kg / m3 Maximum noise level 68 dB Transport dimensions 1860 - 890 - 1100 mm Weight 400 kg Price 11 160 Eur (EXW Jonava, Lithuania)

Condition: excellent (used), Briquetting machine POR Oscar 9kW Average briquette output: 130-180 kg Briquette diameter: 70 mm Motor power: 9 kW Feeding hopper diameter: 1170 mm Technical documentation CE mark Machine weight approx. 800 kg Dkodsxdahyspfx Ac Noh

Condition: used, Gross GP 80 briquetting press Dkedsxpgyaopfx Ac Njh Motor power: 7.5 kW, Briquette diameter: 60 mm, Hopper dimensions: 145 x 145 cm Weight: 1200 kg Year of manufacture: 2016