Used Briqueting Press for sale (12,421)

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Kjdpfx Asv Rpxlsh Esdt Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: new, Year of construction: 2026, THE WOOD PRESS FOR HIGH-QUALITY FUELS The RUF LIGNUM Classic wood briquette press is ideal for briquetting medium quantities of wood chips produced in the wood processing industry. The briquetting process can generate additional revenue and reduce storage and transportation costs. Another advantage is the flexibility of our wood briquetting presses. You can press different material grains into high-quality briquettes without any binding agents. As a valuable source of energy, RUF briquettes therefore have a higher utility value and an optimum CO2 balance. Our LIGNUM series also shines thanks to the innovative RUF hydraulics with high energy efficiency and low wear. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible - Long service life - Low maintenance costs - Compact design - Direct integration into existing production systems possible - Experience for over 35 years ADVANTAGES OF RUF BRIQUETTES - Additional revenue for briquettes - Without binder - CO2 neutral fuel - Higher calorific values compared to logs - Space-saving storage due to rectangular format Technical data RUF LIGNUM CLASSIC Max. throughput of wood (kg/h) 410 Motor power (kW) 30 Max. specific pressing pressure (kg/cm²) 1700 Briquette size (mm) 150x60 Ksdjq Rut Tspfx Ah Eedt Dimensions (m) length x width x height 2.1 x 1.9 x 2.0 Approx. weight (t) 3.3 t Availability/delivery time after consultation

Condition: new, Year of construction: 2026, BRIQUETTING WOOD CHIPS AND GENERATING MORE REVENUE With our RUF LIGNUM R4 wood briquetting press, you can process medium to large quantities of wood chips, regardless of the type of wood, into high-quality briquettes in the best possible way - without the use of binding agents. The briquetting process allows you to achieve higher yields while reducing transportation and storage costs. Our robust wood briquetting presses from the LIGNUM series impress with a long service life, low wear and can be integrated directly into existing production systems. The innovative RUF hydraulics also ensure high energy efficiency. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible Kjdpfx Ajq Ruvvsh Eedt - Long service life & low wear - Low maintenance costs - Compact design - High energy efficiency - Experience for over 35 years ADVANTAGES OF RUF BRIQUETTES - More revenue for briquettes - Without binding agent - CO2 neutral fuel - Higher calorific values compared to logs - Space-saving storage due to rectangular format Technical data RUF LIGNUM R4 Max. throughput of wood (kg/h) 590 Motor power (kW) 30 max. specific pressing pressure (kg/cm²) 1700 Briquette size (mm) 150x60 Dimensions (m) length x width x height 2.9 x 2.1 x 2.1 Approx. weight (t) 4.1 t Availability/delivery time after consultation

Condition: used, Year of construction: 2015, operating hours: 6,123 h, total width: 1,500 mm, total height: 1,700 mm, total length: 2,000 mm, briquette diameter: 50 mm, space requirement width: 1,500 mm, space requirement length: 2,000 mm, space requirement height: 1,700 mm, power: 5.5 kW (7.48 HP), filling opening length: 1,040 mm, filling opening width: 1,040 mm, No. 04545 Briquetting press with screw conveyor WEIMA C 150 Used, year of construction 12/2015, 6123 operating hours, very good condition Ksdpfxjzpxhie Ah Eodt Hydraulic briquetting press for compacting dry wood shavings, sawdust, paper, cardboard and comparable materials Throughput capacity (depending on material) approx. 30 - 50 kg/h Briquette diameter 50 mm Motor power 5.5 kW Hydraulic pressing mechanism Max. clamping jaw stroke 10 mm Storage hopper with discharge arm / agitator Level sensor for automatic operation Manual and automatic operation Siemens SIMATIC PLC control Briquette length monitoring for the production of uniform briquettes Storage hopper approx. 1040 x 1040 mm LW Separate hydraulic unit with oil tank CE-compliant Incl. screw conveyor type RFS. NW 250 x 5200 Motor power 1.5 kW Conveying capacity approx. 4.0 m3/h Filling opening approx. 900 x 300 mm LW Incl. geared motor, feeding section and protective covers Incl. complete technical documentation Transport dimensions briquetting press approx. 2000 x 1500 x 1700 mm LWH, weight approx. 1000 kg Transport dimensions screw conveyor approx. 6500 x 500 x 500 mm LWH, weight approx. 800 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: new, Year of construction: 2025, Small hydraulic briquetting press. Main motor is 4 kW, briquette diameter is 50mm. Capacity of the press is 30-50 kg/hour. The machine is new, and has CE certificate. Customer can order it with oil cooler. For more information visit our YouTube channel, webpage or Facebook site. Kedpfefk N Tpsx Ah Ejdt

Condition: like new (used), Year of construction: 2026, operating hours: 6 h, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Ksdpfx Aoxfwdoh Ejdt Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 250 P-BP Intake nozzle: 250 mm Rated motor power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum flow rate: 4,900 m³/h Nominal flow rate: 3,534 m³/h Kdjdpfx Ascdr E Aeh Ejt Negative pressure: 2,451 Pa Filter area: 22.4 m² Dimensions (L x W x H) in mm: 2,305 x 1,333 x 2,609 Briquetting capacity: 30 - 50 kg/h Location: Available at warehouse 54634 Bitburg Subject to prior sale.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, briquette diameter: 50 mm, overall weight: 340 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, oil tank capacity: 60 l, pressing force: 8 t, operating pressure: 270 bar, Equipment: cooling unit, Hydraulic briquetting press with 4 kW main motor. It produces 50mm diameter briquettes. Capacity of the machine is: 20-30 kg/hour. The raw material hopper is 50 liter. The machine has an oil cooler for the continous work. Kedjf Hmi Eopfx Ah Ejdt

Condition: used, Technical specifications: Briquette diameter: 60 mm Briquette length: 50 mm Tank diameter: 1000 mm Tank height: 930+1000+2400 (filter) mm Capacity: ~60 kg/h Power supply: 380V Motor power: 5.5 kW Safety switch Kodozd Erdjpfx Ah Eedt Option to purchase the filter separately Filter dimensions: Connection diameter: 1000 mm Width: 1700 mm Height: 2400 mm Overall dimensions: Length: 1600 mm Width: 1200 mm Height: 1500+1000+2400 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2000x1600x1500 mm Kdodpfx Ahovz Efvo Est Weight 1550 kg Total power requirement 11,5 kw

Condition: new, Sale from stock- New -Briquetting press GP Genius I/40Briquette diameter: 40 mmPressing capacity: material-dependentHopper opening: 900 x 900 mmHopper height: 1025 mmHopper capacity standard: approx. 0.6 m³Motor power: 4.10 kWConnected load: 400 V /- 5% / 50 HzControl cabinet: electronically controlled via PLCHydraulic unit: with approx. 50 l tank for hydraulic oilPaint finish: RAL 7016 5017Overall dimensions: L = 1,600 mm, W = 1,250 mm,H = 1,300 mmWeight: approx. 550 omatic briquette length control, automatic adjustmentof length depending on material density- gear motor with screw conveyor for screw pre-compaction- permanent agitator- connection part for transport tube- chrome-plated tongs- manual control of all cylinders- automatic end position of all cylinders- safety switch for oil temperature- automatic switch-off in the event of bridging in the container andinterruption of the pressing cycle due to foreign bodies- CE-compliant- automatic ON/OFF rotary encoder- oil temperature switch- automatic switch-off in the event of bridging in the container andinterruption of the pressing cycle due to foreign bodies- CE-compliant- automatic ON/OFF rotary encoder ON/OFF- Oil temperature monitor- 2 transport pipe bends 90°, radius 500No. 001 003 Kdedpfx Aezd Hcweh Ejt

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1700x1170x1510 mm Weight 650 kg Total power requirement 6 kw Kdjdpevz Eqfsfx Ah Eot

Condition: like new (used), Year of construction: 2024, operating hours: 29 h, *one machine is ready for delivery and ready produced Kdjdpfx Aofhql Tsh Est Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette sellers. Classic type - throughput up to 425 kg / h * depending on the material Options for an extra charge: Plant construction / mütek system technology: - mütek shredder MRZ shredding technology - conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary valve - screw conveyors - silos - Control links of all kinds - semi-automatic packaging technology Press: - Packing table with drawer - Top-mounted silo with discharge Your advantages: Most important point: + Very established, well-engineered die press thanks to 25 years of experience. The difficulty and the know-how lies in the detail. For example, valves and cylinder seals of the highest quality. + 24h operation possible + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics Technical data briquetting press: Throughput: up to 425 kg / h * * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material. If no test material is made available to us, we cannot make any statements about the briquette quality and throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Main hydraulic compressor Pressing pressure: up to approx. 1700 kg / cm² Hydraulic system with 260 liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 ph Manual operation of all cylinders "Dustproof" switch cabinet with PLC control and touch display Total power consumption of the briquette press: approx. 33 KW Muxzr8 Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% - Maximum chip length: 20 x 2 x 2 mm - temperature where machine is placed + 8 degrees - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 56,927 h, functionality: fully functional, Manufacturer: ATM Recyclingsystems GmbH Model: ArnoBrik 15 Year of manufacture: 2001 Briquette diameter: 150 mm Technical Data Briquette diameter: 140 or 150 mm Capacity: - Cast iron chips: 4.8 – 5.3 t/h - Steel chips: 4 – 5 t/h Kodpfoxy E H Hsx Ah Eedt - Mixed briquetting: 4 – 5 t/h - Aluminium chips: 1.6 – 1.8 t/h Mixed briquetting: 4 – 4.5 t/h Tyre wire: 2.5 – 3 t/h Hourly throughput depending on material Briquette density for steel and cast iron: 5.5 kg/dm³ Operating pressure: 300 bar Required space (L x W x H): 13,500 x 6,500 x 2,000 mm Machine weight: 30 t Main cylinder force: 5,300 kN Oil requirement: 2,800 litres Main drive: 4 x 30 kW Connected load including ancillary equipment: approx. 150 kW Briquette height: 110 - 140 mm Briquette weight – depending on material: approx. 10 - 16 kg Cycle time: approx. 10 sec

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 109, briquette diameter: 80 mm, overall weight: 1,450 kg, TECHNICAL DETAILS Briquette type Briquette diameter: 80 mm Motor power: 11 kW Production output: 80 - 210 kg/h Machine performance Cycles per minute: 7 Number of cylinders: 3 Max. discharge length: 70 mm Container Ring diameter: 1,200 mm Container capacity: 1 m³ MACHINE DETAILS Dimensions and Weight Dimensions (L x W x H): 2,100 x 1,350 x 1,600 mm Weight: 1,450 kg Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. material moisture: 15 % Kjdpfx Asxyi Ihsh Eedt EQUIPMENT Hydraulic oil machine Monoblock clamping system Capacitive sensor for automatic operation Viewing window End-of-cycle system Electronic pressure gauges for pump and clamping pressure Siemens touchscreen PLC Siemens display Operating hours counter Inductive limit switches LED machine position indicator Stamping unit Preheating system Oil level and temperature sensor Preparation for oil cooling in tank and material outlet Power stabilizer Service tools

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW. SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 200mm 2. Capacity: 12.000 kg/hour ( Steel) 3. Preliminary Compression Ram Thrust: 50 tons 4. Main Compression Cylinder Thrust: 850 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 10 - 12 sec 7. Electric Motor Power: 6x37=222 kW (Main Motors) 8. Machine Dimensions : 11.000mm x 10.000mm 9. Machine Weight: 60.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Kdedpogv I N Uefx Ah Eet 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 80mm 2. Capacity: 700-900 kg/hour ( Copper ) 3. Preliminary Compression Ram Thrust: 12.5 tons 4. Main Compression Cylinder Thrust: 250 tons ( 5 tonne / cm2 ) 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 seconds 7. Electric Motor Power: 30 kW 8. Machine Dimensions (Width x Length x Height): 2.200 mm x 2.600 mm x 2.800 mm 9. Machine Weight: 6.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. Kdodpfx Ajgwa Uroh Ejt

Condition: ready for operation (used), Year of construction: 2007, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 28 t Bending length: 835 mm Travel range of the back gauge: 0 – 370 mm Stroke: 200 mm Distance between frames: 890 mm Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Press travel: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Kedpfx Aezzkwgoh Eedt Operating manual Safety device Mechanical tool clamping (top) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. If in doubt, please compare the information with the photos provided or inspect the goods on-site before the end of the auction.

Condition: used, Year of construction: 2024, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Lotus Press LTS 138’ textile press Item for sale: 1x Lotus Press LTS 138 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). Kdsdpfxozy U Uys Ah Ejt The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! For further information, please feel free to contact us directly.

Condition: as good as new (ex-display), Year of construction: 2026, Machine for sale at a special price Machine available immediately (ex works Neckartailfingen) Demonstration machine Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g. 4 hours). Then the press switches off. Technical data: Briquet dimensions: 30/35 mm (square) Briquet length: 5-35 mm *depending on the material Throughput capacity up to a maximum of 25 kg/h *depending on the material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Capacity of the hopper: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Requirements for raw material: -Wood shavings and dust smaller than 15 mm in length -Moisture content less than 15% ATRO -Sand, stones, metals, and minerals increase wear --- Options available at an extra cost: Kjdpfx Asfci D Aeh Eedt -Timer function + €490 net Machine is started manually and switches off automatically after a set time X. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €690 net (delivery time then approx. 8 weeks) ---

Condition: new, Year of construction: 2026, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. Kdedpfx Ahjchqxxs Est - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 160mm 2. Capacity: 4.500 – 5.500 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 50 tons 4. Main Compression Cylinder Thrust: 600 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 sec 7. Electric Motor Power: 170 kW Overall 8. Machine Dimensions (Width x Length x Height): 5.200mm x 8.000mm x 3.100mm 9. Machine Weight: 42.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. Kodpfx Asgv I Ihjh Eedt 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Includes a 1-year warranty. Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g., 4 hours). Then, the press switches off. Technical data: Briquet dimensions: approx. 30 x 30 mm (square), Briquet length: 5-40 mm *material-dependent Throughput: up to a maximum of 20 kg/h *material-dependent Machine dimensions: approx. 137 x 75 x 148 cm (length x width x height), Machine weight: approx. 250 kg, Silo capacity: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: - Wood chips and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals increase wear Kdjdpfxjd Nnwlj Ah Est --- Options available at an additional cost: - Timer function + €490 net Machine is started manually and switches off automatically after the set time X. - Level sensor for automatic operation + €1450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €890 net (delivery time then approx. 8 weeks) - Special dies + €2,950 net ---

Condition: new, Year of construction: 2026, Availability upon request. Very robust machine with high pressing force. - Also suitable for producing marketable briquette quality, depending on the material. The large-sized press cylinder and the 70 mm briquette size make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low failure rates. + 25 years of experience, continuous development, and know-how. + Several thousand machines in operation with satisfied customers. + Excellent price-performance ratio. Additional cost for demonstration cooling unit: €4,980 net. (can also be retrofitted later) * cools the press tongs (important after 4 hours) and the hydraulic oil. * Cooling unit recommended for regular operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Briquette stroke max.: 100 mm, Briquette stroke opt.: 80 mm, Capacity (material-dependent): up to 150 kg/h* * depending on the bulk density, * based on a bulk density of 200 kg per cubic meter. Motor power: 9.2 kW, 400 Volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil volume: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Optional cooling for press tongs: yes, with special accessory - coolable press tongs Optional cooling for hydraulic oil: yes Cooling of the press tongs and hydraulic oil with a cooling unit (special accessory) Optional level monitoring: yes Optional strand briquette: yes (material-dependent) Optional enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for the raw material: - The moisture content (oven-dry basis) must be between a minimum of 6% and a maximum of 18%. - Chip length max. 20 mm - Installation temperature: temperature-controlled room with a minimum of +5°C Kdjdped Nm Siefx Ah Est - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result.

Condition: ready for operation (used), Year of construction: 1985, machine/vehicle number: 1304, functionality: fully functional, pressing force: 367 t, stroke length: 100 mm, table width: 525 mm, table length: 430 mm, table height: 800 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Buyer is responsible for dismantling and loading! The machine was rebuilt in 2018! TECHNICAL DETAILS Press force: max. 3,600 kN Ram stroke: max. 100 mm Kedpfezx S E Tex Ah Esdt Ram adjustment: 40 mm Stroke rate: 40 strokes/min Table area: 430 × 525 mm Table height: 800 mm MACHINE DETAILS Connected power: 7.5 kW Mains connection: 3-phase, 380 V, 50 Hz Control voltage AC: 220 V Control voltage DC: 24 V Main motor power: 7.5 kW Oil capacity: 50 l Ambient temperature: +5 °C to +40 °C Average temperature over 24 h: max. +35 °C Humidity: 30–95 %, non-condensing Altitude: 1,000 m above sea level Noise level: ≤ 70 dB Dimensions & Weight Dimensions (W x D x H): 1,200 x 2,000 x 2,400 mm Space requirement: approx. 1,500 mm Machine weight: 8,000 kg Control cabinet dimensions: 800 × 1,200 × 300 mm Control cabinet weight: approx. 100 kg EQUIPMENT Operating manual Testing information Digital documentation Note: Induction unit is not included in the scope of supply.