Used Brass Tubes for sale (2,221)

Condition: ready for operation (used), functionality: fully functional, JumboErgo 85 vacuum tube lifter with crane runway for ceiling suspension. Vacuum lifter and blower have been used minimally and are in very good condition, see photos. DGUV certification has expired. Crane runway approx. 16 x 6 m with 10 vertical ceiling suspensions and 2 end suspensions, see photo. Clear crane runway height approx. 3 m, ceiling height approx. 3.5 m, system is height-flexible. Dismantling and pickup in 41334 Nettetal. Ibjdpfjw Snrqex Afioc

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 5,614 h, load capacity: 4,000 kg, lifting height: 4,600 mm, free lift: 2,200 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,000 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,150 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 27X10-12, overall weight: 10,150 kg, empty load weight: 6,150 kg, total height: 2,400 mm, total length: 2,400 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🔧 🕓 Years of experience | 🧰 Own service & paint shop | 🚛 In-house transport | 🤝 After-sales support Looking for a forklift you can rely on? We are a trusted dealer of new and used forklifts, serving clients all over Europe — from small businesses to large industrial plants. Our forklifts are more than just machines — they ensure smooth, safe, and efficient logistics. 🌟 Why choose us? ✅ Full technical inspection (service, filters, oils, key components) ✅ Optional UDT safety certification ✅ In-house paint & repair workshop ✅ EU-wide delivery by our trained drivers ✅ Operator training & test on delivery ✅ Full post-sale service & spare parts ✅ Financing available – invoice in EUR or PLN ✅ Hundreds of satisfied European clients 🚜 OFFER: COMBILIFT C4000 – Four-way / Multi-directional Forklift 📅 2019 | ⏱ 5,614 h | ⚙️ GAS | 🏋️ 4,000 kg | 📏 Duplex Mast 4,600 mm 🔩 Fork positioner 1,150 mm | Forks 1,200 mm 🛞 Superelastic tyres (100%) | Free lift 2,200 mm 💯 Condition: Excellent – fully serviced & tested Ijdpfx Afexmv H Dsijbc 📐 Dimensions: H: 2,400 mm | L: 2,400 mm | W: 2,250 mm Ideal for narrow aisles, long loads, wood, steel, or tube industries — suitable indoors & outdoors. FT LOGISTICS – Quality you can rely on. Service you can trust. 💼

Condition: good (used), Sumbel Herold 350 Gluing Machine This machine is in very good condition, fully operational, and ready for production. This is the most valued brand among small laminating machines. Isdpexk U Iuefx Afisbc Ideal for producing covers, decorative packaging, etc. Made in Germany. The machine uses cold glue. Brass rollers. Infinitely adjustable: glue thickness, gap width, and operating speed. Working width: 350mm Power supply: 230V Weight: 55kg

Condition: good (used), functionality: fully functional, Year of construction: 2016, The machine is in good technical condition; inspection while running is possible by arrangement. Table size: 3000 x 1500 mm, completely new power source installed in 2023. Still in operation, serviced by Bystronic. Processes materials: steel up to 20 mm, stainless steel and aluminum up to 15 mm, brass and copper up to 8 mm. Ibsdpfx Afsxmu R Ieijc

Year of construction: 2001, condition: ready for operation (used), HEK GmbH VGO 200 S Heating cabinet Dimensions (approx.): Ijdpfxsg Hzqbs Afisbc Width: 1035 mm Depth: 800 mm + 210 mm tube Height: 820

Condition: new, overall weight: 34,000 kg, empty load weight: 6,890 kg, maximum load weight: 27,110 kg, axle configuration: 3 axles, suspension: air-lift, tire size: 385 / 65 R 22,5, Year of construction: 2025, total length: 25,500 mm, total width: 37,100 mm, total height: 115,890 mm, front tire size: 385 / 65 R 22,5, rear tire size: 385 / 65 R 22,5, emission class: none, Equipment: ABS, ABS, axle manufacturer SAF, top filling, pressure tank, air suspension with lift, raising and lowering, lift axle (1st axle), tank capacity (body) 32,000 liters, V2A insulated tank, toolbox, compartment volumes 11,500 / 7,000 / 13,500 liters, 500 mm manhole, overflow box with insulated covers, DN100 insulated and heated outlet, walkway with handrail, ladder, 2 x hose tubes, 2 external heating channels, 3 x analog thermometers, 2 toolboxes, stainless steel sterile box, Wabco Smartboard, tire pressure monitoring, operating pressure 2.0 bar, tank and outlets fully insulated, preparation for en-route heating, heating coils for steam and hot water, immediately available. Isdpov Dx Hrofx Afiobc

Condition: new, The KPB 30 is a versatile Tube and Profile Rolling Machine that excels in both horizontal and vertical bending applications. This robust machine features a powerful motorized drive for the fixed lower rollers, allowing for precise manual adjustment of the upper roller to set the bending diameter. Designed for universal use, it is well-suited for a range of profiles including flat and angle irons, as well as T and U profiles. The KPB 30’s proven technology is reflected in its efficiency, making it a reliable choice for tool and mold making, repair workshops, and production environments. It comes standard with a foot pedal for enhanced convenience, ensuring smooth operation. With a bending speed of 4.2 m/min and a shaft diameter of 30 mm, the KPB 30 is ready for immediate use. For those looking to invest in a high-quality, robust machine for tube and profile processing, request a quote today and explore the capabilities of this exceptional machine tool from KNUTH. Ibsdpfxewut H Hs Afijc

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 5,614 h, load capacity: 4,000 kg, lifting height: 4,600 mm, free lift: 2,200 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,000 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,150 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 27X10-12, overall weight: 10,150 kg, empty load weight: 6,150 kg, total height: 2,400 mm, total length: 2,400 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🔧 🕓 Years of experience | 🧰 Own service & paint shop | 🚛 In-house transport | 🤝 After-sales support Looking for a forklift you can rely on? We are a trusted dealer of new and used forklifts, serving clients all over Europe — from small businesses to large industrial plants. Our forklifts are more than just machines — they ensure smooth, safe, and efficient logistics. 🌟 Why choose us? ✅ Full technical inspection (service, filters, oils, key components) ✅ Optional UDT safety certification ✅ In-house paint & repair workshop ✅ EU-wide delivery by our trained drivers ✅ Operator training & test on delivery ✅ Full post-sale service & spare parts ✅ Financing available – invoice in EUR or PLN ✅ Hundreds of satisfied European clients 🚜 OFFER: COMBILIFT C4000 – Four-way / Multi-directional Forklift 📅 2019 | ⏱ 5,614 h | ⚙️ GAS | 🏋️ 4,000 kg | 📏 Duplex Mast 4,600 mm Ibsdpfxjxmv Hws Afijc 🔩 Fork positioner 1,150 mm | Forks 1,200 mm 🛞 Superelastic tyres (100%) | Free lift 2,200 mm 💯 Condition: Excellent – fully serviced & tested 📐 Dimensions: H: 2,400 mm | L: 2,400 mm | W: 2,250 mm Ideal for narrow aisles, long loads, wood, steel, or tube industries — suitable indoors & outdoors. FT LOGISTICS – Quality you can rely on. Service you can trust. 💼

Condition: new, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 65 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, number of axes: 5, warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, STANDARD EQUIPMENT • 3 sets of dies (1 set of rolling die and 2 sets of bending dies, or 3 sets of bending dies, according to required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo motor-driven feeding axis • Servo motor-driven rotation axis • Servo motor-driven bending axis • Servo motor-driven H and V axes • 21” TFT touchscreen mobile CNC control unit • Rolling capability • 3D bending simulation • Collision simulation • Daily, weekly, and monthly total operation status reports • Calculation of working material length • Calculation of estimated bending time • Conversion from X-Y-Z to Y-B-C • Mobile foot pedal with emergency stop feature • Remote assistance • Bending with or without mandrel Ibjdjxircgepfx Afijc • Safety plate behind the bending head • Hydraulic clamping • Hydraulic mandrel • Hydraulic support • Hydraulic linear slide system • Hydraulic claw clamp • Electrical panel safety lock and main switch panel lock • Electrical system cooler • Overload protection • Automatic dispatch of detailed operation reports OPTIONAL EQUIPMENT (Not included in price) • Additional die sets • Safety mat (750 x 1000 mm) • Safety mat (1000 x 1500 mm) • Hydraulic oil heater • Additional mandrel length (up to 6 m, priced per meter) • Ball mandrel and wiper die set • Automatic mandrel lubrication system (for suitable tube diameters) • Hydraulic oil cooler CAPACITY MB-65 CNC/5 AXIS Maximum capacity mm: Ø65x3mm Maximum bending radius mm: 250mm Maximum bending angle °: 190° Hydraulic pressure bar: 50-200 Working length mm: 3000 Rotation tolerances: Adjustable Bending power kW: 22.5 Dimensions LxWxH mm: 6350x1400x1600 Weight kg: 3950

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, Ibjdpexmirgefx Afisc which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation - CE marking

Condition: ready for operation (used), Centerless tube grinder – belt grinder – centerless tube grinder – cylindrical grinder Centerless grinding/polishing machine for tubes for workpieces with a minimum length of 1,100 mm. The machine can be used for both wet grinding and polishing. Iodpfxsxmilte Afijbc The machine can process tubes with a diameter from 10 mm to 160 mm.

Condition: new, overall weight: 34,000 kg, empty load weight: 6,890 kg, maximum load weight: 27,110 kg, axle configuration: 3 axles, suspension: air-lift, tire size: 385 / 65 R 22,5, Year of construction: 2025, total length: 25,500 mm, total width: 37,100 mm, total height: 115,890 mm, front tire size: 385 / 65 R 22,5, rear tire size: 385 / 65 R 22,5, emission class: none, Equipment: ABS, ABS, axle manufacturer SAF, top filling, pressure tank, air suspension with lift, raise and lower function, lift axle (1st axle), tank volume body 32,000 liters, V2A insulated tank, toolbox, compartment sizes 11,500 / 7,000 / 13,500 liters, 500 mm manhole, overflow box with insulated lids, DN100 insulated and heated discharge, walkway with handrail, ladder, 2 x hose tubes, 2 external heating ducts, 3 x analog thermometers, 2 toolboxes, stainless steel sterile box, Wabco Smartboard, tire pressure monitoring, operating pressure 2.0 bar, tank and outlets fully insulated, on-the-road heating prepared, heating coils for steam and hot water heating, immediately available. Ibodpfxov Ehhue Afioc

Condition: new, The RAX Tube End Finishing Machine from KNUTH is a motor-driven notcher designed for efficiently notching tubes made of steel and non-ferrous heavy metals. With its compact footprint, this versatile machine can accommodate various tube diameters ranging from 1/4" to 2", ensuring high productivity and low operational costs. The RAX operates with a powerful 1.5 kW main drive motor and is capable of cutting plate thicknesses of up to 3 mm, delivering clean cuts that require no rework. It's simple to use and can handle multiple tube sizes instantly, enhancing your workflow. You can easily operate this machine with standard 230 Volt connectivity. To learn more about how the RAX can benefit your tube processing, request a quote today. This robust notcher stands out in the Tube End Finishing Machines category, making it an essential addition to your Tube and Profile Processing solutions. Ibjdjwhkf Tepfx Afisc

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 5,614 h, load capacity: 4,000 kg, lifting height: 4,600 mm, free lift: 2,200 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,000 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,150 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 27X10-12, overall weight: 10,150 kg, empty load weight: 6,150 kg, total height: 2,400 mm, total length: 2,400 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🔧 Ijdpfx Asxmv Hdsfiobc 🕓 Years of experience | 🧰 Own service & paint shop | 🚛 In-house transport | 🤝 After-sales support Looking for a forklift you can rely on? We are a trusted dealer of new and used forklifts, serving clients all over Europe — from small businesses to large industrial plants. Our forklifts are more than just machines — they ensure smooth, safe, and efficient logistics. 🌟 Why choose us? ✅ Full technical inspection (service, filters, oils, key components) ✅ Optional UDT safety certification ✅ In-house paint & repair workshop ✅ EU-wide delivery by our trained drivers ✅ Operator training & test on delivery ✅ Full post-sale service & spare parts ✅ Financing available – invoice in EUR or PLN ✅ Hundreds of satisfied European clients 🚜 OFFER: COMBILIFT C4000 – Four-way / Multi-directional Forklift 📅 2019 | ⏱ 5,614 h | ⚙️ GAS | 🏋️ 4,000 kg | 📏 Duplex Mast 4,600 mm 🔩 Fork positioner 1,150 mm | Forks 1,200 mm 🛞 Superelastic tyres (100%) | Free lift 2,200 mm 💯 Condition: Excellent – fully serviced & tested 📐 Dimensions: H: 2,400 mm | L: 2,400 mm | W: 2,250 mm Ideal for narrow aisles, long loads, wood, steel, or tube industries — suitable indoors & outdoors. FT LOGISTICS – Quality you can rely on. Service you can trust. 💼

Condition: new, Year of construction: 2025, control type: CNC control, degree of automation: automatic, pipe diameter (max.): 51 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, number of axes: 5, Equipment: CE marking, emergency stop, foot remote control, STANDARD EQUIPMENT • 3 Sets of Dies (1 set of rolling die and 2 sets of bending dies, or 3 sets of bending dies, as per required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo Motorized Feed Axis • Servo Motorized Rotation Axis • Servo Motorized Bending Axis • Servo Motorized H and V Axes • 21” TFT Touchscreen Mobile CNC Control Unit • Rolling capability • 3D Bending Simulation • Collision Simulation • Daily, Weekly, and Monthly Total Operating Status Reports • Calculation of Workpiece Material Length • Calculation of Estimated Bending Time • X-Y-Z to Y-B-C Conversion • Emergency Stop Foot Pedal with Mobile Function • Remote Assistance • Mandrel Bending and Mandrel-less Bending • Safety Plate behind Bending Head • Hydraulic Clamping • Hydraulic Mandrel • Hydraulic Support Iodjxircaopfx Afisbc • Hydraulic Linear Guide System • Hydraulic Chuck Clamp • Safety Lock on Electrical Cabinet and Keyed Panel Lock • Electrical System Cooling Unit • Overload Protection • Detailed Operation Report Automatically Sent OPTIONAL EQUIPMENT (Not Included in Price) • Additional Sets of Dies • Safety Mat (750 x 1000 mm) • Safety Mat (1000 x 1500 mm) • Hydraulic Oil Heater • Additional Mandrel Length (up to 6 m) – per meter • Ball Mandrel and Wiper Die • Automatic Mandrel Lubrication System (for suitable tube diameters) • Hydraulic Oil Cooler CAPACITY MB-51 CNC/5 AXIS Maximum Capacity mm Ø51x3 mm Maximum Bending Radius mm 250 mm Maximum Bending Angle ° 190° Hydraulic Pressure bar 50–200 Working Length mm 3000 Rotation Tolerances ±0.1 Bending Speed kW Variable LxWxH mm 6350x1400x1600 Weight kg 3750

Condition: ready for operation (used), functionality: fully functional, Steris VHP 1000ED Biodecontamination Unit APPLICATION The STERIS VHP® 1000ED Biodecontamination Unit is designed for mobile biodecontamination1 of clean, dry, sealed enclosures2 such as isolators, chambers, and small rooms using STERIS's VHP process technology, featuring Vaprox® Hydrogen Peroxide Sterilant DESCRIPTION With its mobile design and multi-purpose features, the VHP® 1000ED is one of the most versatile pharmaceutical grade Biodecontamination Units on the market today. The Biodecontamination Unit uses STERIS patented VHP process technology. The process uses hydrogen peroxide vapor as a broad spectrum antimicrobial without condensation of active ingredient onto surfaces. This non condensation feature provides additional benefit of a wide range of material compatibility. The VHP® 1000ED Biodecontamination Unit features easy operation with an easy to use operator Isdpfowqz Dlex Afiobc interface and other key built-in design features like dehumidification, pressure control, Vaprox cartridge interface and aeration module for an All-In-One unit. Once the Customer cycle is selected, the control system automatically completes the desired biodecontamination cycle. Additionally, the VHP® 1000ED Biodecontamination Unit offers an impact printer for hard copy of the cycle data as well as a USB port for electronic biodecontamination cycle capture. The unit includes a connection kit with four (4) Banjo 1.25" couplings and 25 ft. (7.6 m) of tubing for connecting to enclosures or rooms Good working condition. Please check out our other listings as well.

Condition: ready for operation (used), Year of construction: 2000, Line for the production of round tubes and closed profiles from black and stainless steel, with diameters ranging from 20.0 mm to 70.0 mm and wall thicknesses from 0.5 mm to 3.5 mm. Different diameter ranges are possible by manufacturing a suitable set of rollers. The tube or closed profile is formed by rolling the appropriately sized and thick steel strip using a roller set, then joined together by TIG welding. During production, the following processing steps are performed: a) grinding the weld seam b) calibration c) straightening d) and cutting to length The finished product, the 'raw tube', can be further processed to achieve the desired surface structure. Two main finishing processes are used: a) wet grinding using abrasive belts b) and/or dry polishing using polishing wheels and compounds. CONSTRUCTION The tube/profiling line features automatic TIG welding by SAF: a) Tricathode NERTAMATIC 300 TR TIG inverter, 2 units b) Tricathode NETRINOX TH 500 TIG inverter, 1 unit c) Welding of 0.5 – 1.5 mm wall thickness products using E16 torch d) Welding of 1.5 – 3.5 mm wall thickness products using E25 torch e) RETRISAF cooling system 1.1 Steel strip coil support and decoiler 1.2 Roll forming stations Ijdpexmiirjfx Afiebc a) entry station b) preliminary forming station c) main forming station 1.3 Welding segment – triple-electrode TIG welding heads with inert gas (argon) shielding 1.4 Weld seam cleaning station 1.5 Calibration station 1.6 Straightening station 1.7 Flying saw – product cutting to specified length Additional line components: 1.8 Bossi 4-head tube grinder Type: CPS 400x3000/4 Belt: 3000x150 mm 1.9 Bossi 2-head tube polisher Type: CP 400-2U

Condition: used, functionality: fully functional, Year of construction: 2012, machine/vehicle number: 0760801000602, Multiflex tube cutting machine Adige Operational Ibjdpfexmg Aisx Afiec

Condition: new, The EM 250, a robust Tube End Finishing Machine from KNUTH, is designed to provide precise deburring of tubes, profiles, and flat materials, making it an essential addition to any cold circular saw, shear, or profile processing setup. This powerful machine allows for effective deburring both inside and outside the workpieces utilizing a sturdy wire brush, ensuring that chips and burrs are thoroughly removed while maintaining the integrity of the cutting edge. With a motor rating of 2.2 kW and a speed of 3,000 1/min, the EM 250 is ready to enhance productivity in any workshop engaged in tube processing. It features a rigid machine foot and is equipped with a vacuum exhaust connection for cleaner operation. Moreover, it comes with a 5-year warranty for the drive motor, underscoring its reliability. For a well-rounded solution in Tube End Finishing Machines, consider the EM 250. Request a quote today to learn more about this powerful tool in Tube and Profile Processing. Isdpfju E H Tgsx Afijbc

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-3015-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1520 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2280 mm - Height: 1500 mm - Total mass: 1100.0 kg - Maximum load: 1800.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Ibjdpfjh E Iziox Afijc Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: used, machine/vehicle number: 11756, second-hand WEILER LZ 280 sliding headstock and sliding headstock lathe center height 125mm center width: 800mm spindle speed approx. 26-2000 rpm 1 x three-jaw lathe chuck Ø 125mm with inner and outer jaws, brand new Multifix size A with 2 interchangeable holders Emergency stop/switch unit, rear chip guard, Ibedpfxevd Dbns Afioc all change wheels present, drive disk, storage tray, machine light, new socket, 15 collets from Ø 3.5 - 18.5 mm, collet clamping tube, fixed point and MK 2 sleeve for clamping tube, bed stop, chuck protection cover, various turning tools and operating instructions. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. A viewing of the machine is possible by arrangement.

Year of construction: 2020, condition: used, functionality: fully functional, Miltenyi Biotec Clinimacs Prodigy Automated Cell Processing System. Dimensions 73.5 cm × 40 cm × 48 cm (w × d × h) Weight approx. 70 kg Input voltage 100–240 V~ Power consumption 810 W Frequency 50/60 Hz Pump speed 2–400 mL/min Atmosphere control Gas mix unit for CO2, compressed air, and N2; min. pressure: 1 bar, max. pressure: 2.5 bar Temperature control +4 °C to +38 °C Centrifugation Max. 2,500 rpm (400×g) Microscope camera Max. magnification: 400-fold Monitor 10.1” TFT touchscreen MACS tube sealer For sealing CliniMACS Prodigy Tubing Sets PVC tubes Types of starting material Leukapheresis, bone marrow, cryopreserved PSCs Available cell processing steps Cell washing, density gradient centrifugation, cell activation, fluorescent antibody labeling of cells, cell depletion and / or enrichment via magnetic cell separation, viral transduction, cell expansion, expansion and differentiation of adherent cells, cell culture and medium exchange, formulation of final cell product Tubing Sets and accessories Dedicated CliniMACS Prodigy Tubing Sets and Accessories available IPC/QC Integrated IPC/QC sampling pouches allow sterile sample removal Isdpfsttwx Dsx Afiebc Manufacture and availability Manufactured in Germany and shipped worldwide. Good working condition. Please check out our other listings as well.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 21,346 h, laser power: 3,200 W, X working area max.: 3000 mm Y working area max.: 1600 mm Control: Rexroth IndraMotion MTX Laser power: 3000 watts Machine - Enclosed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamps and tools - Hydraulic clamps (3 pieces) - Maintenance-free three-phase motors for drives - Repositioning device with programmable hold-down - Foot pedal for clamp closing - Beam protection with direct access - Parts chute on the right - Parts flap on the left - Sensor for parts flap - Work area illumination - FocusLine - Retrofittable for SortMaster Compact - Protective tool - Transport and installation device TRUMPF Laser - Laser light cable (LLK) according to standard layout (10m) - Laser power control - Laser logbook function - Closed beam guidance via laser light cable (LLK) - Separate power supply for TruDisk Compact Cutting Unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punching Head - Delta Drive - Rotatable mono-tool adapter - Programmable hold-down position - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming function - Stroke counter for punch Control - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color screen - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Auto shut-off with wake-up function - Program management - Production plan Data Transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Two-beam safety light curtain Extended Standard Equipment - TruDisk 3001 solid-state laser with 1 LLK output - Chiller (water-air) - Compact dust extraction system - 1st locating pin (right inside) - Ball tables - Good parts container for parts chute - Chip container for rear removal Extended Laser Equipment - Copper cutting package - Brass cutting package Extended Punching Equipment - MultiShear function - Multitool function - MultiBend function - Thread forming with thread counter Thread former breakage monitoring Lubricant level monitoring - Marking/fast embossing function - Engraving function - Deburring and roller technology function - Ejecting small parts function Parts Ejection - Integrated sorting function for parts chute • Sensor for parts chute • Tray line for 4 standard trays 300 x 400 mm • Customer-supplied trays Extended Machine Equipment - 1x additional clamp - Machine rated for ambient temperatures up to 43°C Special Sheet Metal Processing - Brush tables - Warping detection Options for Compact Dust Collector - CO2 extinguishing system for the compact dust collector Data Transmission - Wireless Operation Point Machine Accessories - 1 set RTC cassettes incl. die plate SheetMaster Compact - SheetMaster Compact 3000 x 1500 mm (AK05) • Loading station with spreader magnet for sheet separation • Suction frame Isdpfxjxhmtws Afisbc • Vacuum sensor system • Double sheet detection • Unloading cart for scrap grid and microjoint sheets • 2nd operator's station for loading and unloading.

Condition: new, Year of construction: 2024, pipe diameter (max.): 38 mm, pipe length (max.): 3,000 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, total length: 4,280 mm, total width: 1,000 mm, total height: 1,500 mm, warranty duration: 12 months, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 3 mm, STANDARD EQUIPMENT • 3 Sets of Dies – (1 set of rolling die with 2 sets of bending dies, or 3 sets of bending dies in requested sizes) • 5-axis servo control (Y, B, C, H, V) • Servo Motorized Feeding Axis • Servo Motorized Rotation Axis • Servo Motorized Bending Axis • Servo Motorized H, V Axes • Mobile CNC Control Unit with 21” TFT Touchscreen • Rolling function • 3D bending simulation • Collision simulation • Daily, Weekly, and Monthly Total Operating Status Reports • Calculation of Working Material Length • Calculation of Estimated Bending Time • Conversion from X-Y-Z to Y-B-C • Mobile Foot Pedal with Emergency Stop • Remote Assistance • Mandrel Bending – With or Without Mandrel • Safety Plate at Back of Bending Head • Hydraulic Clamping • Hydraulic Mandrel • Hydraulic Support • Hydraulic Linear Slider System • Hydraulic Claw Collet • Electrical Panel Safety Lock and Keyed Panel Lock • Electrical System Cooler • Overload Protection • Detailed Operating Report Automatically Sent by E-mail OPTIONAL EQUIPMENT (Not included in the price) • Extra Die Sets • Safety Mat (750 x 1000 mm) • Safety Mat (1000 x 1500 mm) • Hydraulic Oil Heater • Extra Mandrel Length (up to 6 m) – per meter • Ball Mandrel and Wiper Die • Automatic Mandrel Lubrication System (for suitable pipe diameters) • Hydraulic Oil Cooler TECHNICAL SPECIFICATIONS CAPACITY MB-38 CNC/ 5 AXIS Max. Capacity mm Ø38x3 mm Ibodpfx Afju Hkb Dsiec Max. Bending Radius mm 250 mm Max. Bending Angle ° 190° Hydraulic Pressure bar 50-200 Working Length mm 3000 Rotation Tolerance ±0.1 Bending Speed kW Adjustable LxWxH mm 5500x1300x1600 Weight kg 2250

Condition: new, The Hydraulic Tube Bender 1/2 is a compact and mobile Tube Bending Machine designed for bending steel tubes of larger diameters with a powerful manual hydraulic pump. This machine boasts a capacity of 10 tons and comes complete with dies for commonly used tube dimensions, allowing you to create bends of up to 90 degrees. With its robust 3-leg stand and 6 bending segments, it ensures stability and ease of use during operation. The included attachments cater to various diameters, making this versatile tool ideal for your tube and profile processing needs. You can efficiently bend tubes while enjoying the benefits of its portable design. If you require a reliable Tube Bending Machine, consider the Hydraulic Tube Bender 1/2 from KNUTH to enhance your workshop capabilities. Don't hesitate to request a quote today! Ibjdsuzlh Iopfx Afiec