Used Brass Tubes for sale (2,221)

Condition: good (used), Year of construction: 2012, Ref. -No.: 10469 Manufacturer: JAESPA Type: Comfort 420 A Year of construction: 2012 Storage location: Halberstadt Machine-No.: 233XXXXX Weight Of The Machine Ca.: 2500 kg Machine length: 2400 mm Machine width: 2800 mm Machine Height: 1700 mm Bending capacity square tube: 420 x 420 mm Bending capacity round bar: 420 mm Bundle min.: 215 x 65 mm Bundle max.: 420 x 170 mm Flat: 420 x 420 mm Roll diameter: 590 mm Saw band dimensions: 4100 x 1300 x 4780 mm Belt speed: 15 - 100 m/min. Operating pressure: 50 bar Flow rate: 6,5 l/min Tank capacity: 40 liter Coolant content: 50 liter Material support height: 800 mm Saw motor: 5,5 kW hydraulic motor: 0,75 kW coolant pump: 0,12 kW Chip brush: 0,09 kW Ibjdpfoxmd S Uex Afisc Chip conveyor: 0,18 kW Measurement standard: DIN EN 23746

Year of construction: 2012, condition: ready for operation (used), Four heat exchangers from various manufacturers are available. 1) Shell and tube heat exchanger K. Ley Maschinen- und Apparatebau, year of manufacture: 1999, material: stainless steel/cast iron, heat transfer surface: 30m²-40m², operating pressure inside/outside: 25bar/45bar, max. operating temperature: 250°C, internal/external volume: 290l/200l, machine dimensions X/Y: approx. 6400mm/400mm, weight: approx. 1800kg. 2) Shell and tube heat exchanger Wisstaler Hüttental, year of manufacture: 1979, heat transfer surface: 80m²-120m², max. operating temperature: 150°C, internal/external volume: 579l/1387l, machine dimensions X/Y: 2500mm/800mm, weight: approx. 2800kg. 3) Shell and tube heat exchanger Vehterus PSHE 3LL-270/5/5, year of manufacture: 2012, heat transfer surface: 19.9m², capacity: 245kW, operating pressure: 16bar, test pressure: 33bar, max. operating temperature: 110°C, internal/external volume: 21.4l/33.2l, machine dimensions X/Y: approx. 850mm/400mm, weight: approx. 300kg. 4) Plate heat exchanger GEA BT30-5C-10V-80, year of manufacture: 2010, heat transfer surface: 5m²-10m², max. operating temperature: 200°C, machine dimensions X/Y/Z: approx. 500mm/350mm/750mm, weight: approx. 520kg. Documentation available. An on-site inspection is possible. A package sale is preferred. Ijdpexn S S Ssfx Afisbc

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, We offer for sale an Industrial Liquid Vacuum Cleaner Karcher IVL 50/24-2. This vacuum cleaner is designed for suction of coolant fluids and lubricating liquids, as well as recirculating them back into a closed system after separation from solid components. The IVL 50/24-2 is equipped with two turbines, a 50-liter liquid tank, and a smaller tank for solid particles. Condition: Very good Year of manufacture: 2014 The machine is in very good condition—both visually and technically. It has undergone a comprehensive and detailed overhaul, making it fully operational and ready for immediate use. All machines we offer are shown in authentic photos—you buy exactly the machine you see in the pictures. A 12-month WARRANTY is provided for all equipment purchased from us. Equipment included: Complete liquid suction kit (suction hose, suction tubes, wide nozzle) Ibsdpfxow Igxhe Afisc Technical data: • Supply voltage (V): 220-240 • Power frequency (Hz): 50-60 • Airflow (l/s): 2 x 56 • Nominal diameter (mm): 51 • Vacuum (mbar/kPa): 235 / 23.5 • Liquid tank capacity (l): 50 • Solid particle tank capacity (l): 38

Condition: used, Year of construction: 1972, functionality: limited functionality, FRECH DAM 100, year of manufacture 1972. General overhaul by Brescia Presse in 2000. The hydraulic system was converted to an external two-stage hydraulic pump with tube cooler. Mold spraying system Wollin, cooling belt and holding furnace RAUCH MO 125 E by RAUCH. Further details and pictures on request. Ijdpfx Ajxn Sp Defisbc

Condition: used, Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: ZD-QFP18, total width: 4,600 mm, total length: 16,000 mm, total height: 2,600 mm, cutting length (max.): 1,200 mm, type of input current: DC, overall weight: 24,000 kg, FANBANG- Jianshe twisted paper handle machine with Turn top J fold option. This machine is designed for producing square bottom paper bags with handles from sheet paper, either blank or printed. Combined with a handle-making unit, it performs handle production, handle application, bag mouth folding, side gluing, tube forming, bottom impressing, bottom gluing, bottom forming, and final product collection—all in a fully automatic process. It is an ideal piece of equipment for manufacturing food bags, shopping bags, and similar products, and can produce paper bags of various sizes. Within the suitable paper range, the production capacity can reach 60 pcs/min or higher, increasing unit productivity and profitability. Full enclosure design ensures operator safety. Ibsdpfx Afoxn Skujisc

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, The hose bag packaging machine shown in the picture is for sale. It can pack liquids, sauces, or dry goods. It also has a vacuum function, and gas flush function. Carrying handle design. With a vacuum pump and a conveyor belt. Ceqfu792Uk The diameter of the tube is about 23 cm, the length of the package can be adjusted in the program. We used it to make 1-2 kg packages, but it is good from 0.5 kg to 4 kg. The machine is about 5 years old but we used it for 1 month. Quality Chinese made. Top Y Machinery TOPY-VP520 VFFS Packing Machine Can be viewed and tried in Székesfehérvár. The price shown is without tax. Ibedpou S Hfmefx Afijc

Condition: new, Year of construction: 2025, color: grey, overall weight: 15,000 kg, maximum load weight: 12,200 kg, empty load weight: 2,800 kg, loading space volume: 36 m³, loading space width: 2,350 mm, loading space length: 6,500 mm, loading space height: 2,400 mm, gearing type: other, driver cabin: other, Vehicle location: incoming / in transit, steel structure, doors Structure: roll-off container with double-wing door, approx. 36 m³, ARCHIVE IMAGES Roll-off Container HAK65SP/36/37m³ - Manufactured according to DIN 30722 / Lifting bar 60 mm diameter / Hook height 1570 mm - Internal body length 6,500 mm / internal body width approx. 2,350 mm / internal body height 2,400 mm - Floor made of 5 mm S-355 flat steel - Side walls made of 3 mm S-235 flat steel - Side walls folded + 3 side stiffeners per side Ibjdpsxb Ekhjfx Afiec - Floor beam spacing approx. every 330 mm - Top frame: round tube with 89 mm diameter / all-around net hooks - External rollers greasable and interchangeable - Gross weight 15,000 kg / empty weight approx. 2,800 kg / payload approx. 12,200 kg - Fully primed & painted in RAL colour: grey RAL 7016 - Double-winged door with central locking according to UVV and additional locking - Incl. nameplate & container inspection according to DGUV Rule 114-010 (formerly BGR 186) - Incl. warning marking stripes acc. to DIN 67520 Part 2 Available from approx. September/October All details without guarantee as incoming! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, Exhibition machine Tube laser Fibertube ECO 6kW Length 6500mm 5-axis servo Beckoff control Isdpfx Ajxn N Ahofiobc LCD monitor

Year of construction: 2019, condition: ready for operation (used), This Durma HD-TC60170 was manufactured in 2019. It features a 3kW IPG Fiber laser source, capable of 2.5D cutting, and handles up to 170mm pipes and 120x120cm tubes. It includes an exhaust system, spatter guard, bundle loader for serial work, and a chain loader for smaller jobs. The machine has a 6.5 meter inlet and a 4.5 meter outlet, extendable to 6 meters. Contact us for more information about this machine. Application Types Cutting Ibsdpfxjxmbxro Afijc

Condition: used, Year of construction: 2006, pipe diameter (max.): 35 mm, bending angle (max.): 150 °, total length: 3,000 mm, input voltage: 380 V, wall thickness: 3 mm, 2006 wafios BER35 Ibjdpfxsvftpdj Afijc

Condition: new, Pole pallet, manurack, mobilrack - new Mobile storage racks are used for storing goods of unusual dimensions and have a double purpose. They can be used as transport pallets and with the installation of 4 support tubes, they can be used to build storage racks which can be transported without having to reload the goods placed on them. Both heavy and light products can be stored on a metal pallet. Thanks to its simplicity and speed of assembly, Mobilrack can increase storage capacity in a few moments. At the end of the season, the pallet can be dismantled to save space in the warehouse. This offer applies to a single pallet/base: Commodity code: MTP000276 Length: 154.5 cm Width: 118 cm Bax3Ttyxrfw Height : 31 cm Load capacity : 1500 kg Finish: hot-dip galvanised Price : 82 euros / piece The offer concerns a double pallet /base/ : Commodity code : MTP000283 Length : 202.5 cm Width: 118 cm Height : 31 cm Load capacity : 2000 kg Finish: hot-dip galvanised Price : €120 / piece Each pallet of posts requires 4 cantilever tubes, available in different sizes according to the customer's needs: 120, 150, 200cm. The offer concerns a tube for a Manurack 120×6 cm rack: Product code : MPP000706 Height (cm): 120 Thickness (mm): 2,9 Diameter (cm): 6 Price : 7 euro / piece The offer concerns a tube for a Manurack 150×6 cm rack: Item code : MPP000704 Height (cm): 150 Thickness (mm): 2.9 Diameter (cm): 6 Price : 8,50 euro / piece The offer concerns a tube for a Manurack 200×6 cm rack: Item code : MPP000705 Height (cm): 200 Thickness (mm): 2.9 Diameter (cm): 6 Isdpfxeu Trpyo Afisbc Price : 11,50 euro / piece Prices quoted are for wholesale quantities ( full truckload ) for export outside Poland, please contact us for details. To check wholesale and retail prices within Poland, please contact us. * I have large quantities ... * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: new, Year of construction: 2025, laser source manufacturer: TRUMPF, laser power: 6,000 W, Equipment: CE marking, Offer: TruLaser 1030 Lean Edition Best Value for Money Machine Efficient and Powerful Laser Cutting When it comes to value for money in laser cutting, the robust machines of the TruLaser Series 1000 Lean Edition deliver results cost-effectively. They are profitable even at low utilization levels thanks to their relatively low investment costs. With 6 kW, they cut all materials up to 25 mm thickness and ensure top quality. Get started right away: Machine operation is intuitive and cutting parameters are already integrated. Wide Range of Materials and Features Structural and stainless steel, aluminium, copper, brass, and FlyLine Technologies and processes for maximum process reliability and robustness Collision protection, nanojoints Easy To Operate Ibsdpfexn Irbsx Afiec Qualified cutting data, Cutting Guide, online protective glass monitoring, multi-sheet processing, fully automatic pallet changer Included: TruLaser 1000 Lean Edition with fully automated pallet changer and 6 kW laser Programming software Training & Services: Including e-learning package for programming software Operator training for software Operator training for machine TRUMPF Quality Our fast remote service support is available worldwide to assist you with any concerns. For further technical details, please refer to the data sheet or visit our website. If you have any questions, feel free to contact us. About TRUMPF: In our 100-year company history, we have helped shape thousands of sheet metal fabrication operations across Germany alone. We pass this experience on to our customers every day. With innovative machines and features, the most comprehensive service concept on the market, as well as experts in software, automation and smart factory, we ensure you always receive a customized offer tailored to your requirements. P.S.: We are also happy to assist you with financing. With TRUMPF Financial Services’ financing, leasing or pay-per-use models, we support you in both financial and business challenges.

Condition: new, Year of construction: 2025, color: grey, overall weight: 15,000 kg, maximum load weight: 12,200 kg, empty load weight: 2,800 kg, loading space volume: 36 m³, loading space width: 2,350 mm, loading space length: 6,500 mm, loading space height: 2,400 mm, gearing type: other, driver cabin: other, Vehicle location: inbound / in transit, steel body, doors Body: Roll-off container with double folding doors, approx. 36 m³, ARCHIVE PHOTOS Roll-off container HAK65SP/ 36/37m³ Ibedpoxb Eknefx Afiec - Manufactured according to DIN 30722 / Lifting bar diameter 60mm / Hook height 1570mm - Internal body length 6,500mm / Internal body width approx. 2,350mm / Internal body height 2,400mm - Floor made from 5mm S-355 flat steel - Side walls made from 3mm S-235 flat steel - Profiled side walls with 3 lateral stiffeners per side - Floor support spacing approx. 330mm - Upper frame made from 89mm diameter round tube / continuous net hooks - External rollers are lubricatable and replaceable - Gross weight 15,000kg / unladen weight approx. 2,800kg / payload approx. 12,200kg - Fully primed and painted in RAL colour: Grey RAL 7016 - Double folding door with central locking system compliant with accident prevention regulations (UVV) and additional locking device - Including type plate and container inspection according to DGUV Rule 114-010 (formerly BGR 186) - Including warning markings in accordance with DIN 67520 part 2 Available from approx. September/October All details are without guarantee as the unit is inbound! ACCESSORY DETAILS WITHOUT GUARANTEE; subject to changes, prior sale, and errors.

Condition: new, Sales from STOCK! Model: AMWP11.2-8100 Max. Working Height: 11.2 m Max. Platform Height: 9.2 m Max. Horizontal Reach: 3 m Up and Over Height: 7.89 m Guardrail Height: 1.1 m Overall Length: 2.53 m Overall Width: 1.0 m Overall Height (Stowed): 1.99 m Platform Dimension: 0.62 x 0.87 m Ground Clearance (Stowed): 70 mm Iedjulakkopfx Afijbc Ground Clearance (Raised): 19 mm Wheelbase: 1.22 m Loading Capacity: 200 kg Occupants: 2 Turning Radius (Inside/Outside): 0.23 / 1.65 m Turret Rotation: 345° Jib Movement: 130° Travel Speed (Stowed): 4.5 km/h Travel Speed (Raised): 0.5 km/h Up/Down Speed: 42/38 seconds Max. Working Slope: X: 2.5° / Y: 2.5° Tyres: Ø 381 x 127 mm Driving Motor: 24 V / 0.9 kW Lifting Motor: 24 V / 3.3 kW Battery: 24 V / 240 Ah Charger: 24 V / 30 A Weight: 2950 kg AC Driving Motor Proportional Joystick Controls Self-Locking Gate Drivable At Full Height Non-Marking Tyres 4 x 2 Drive Automatic Braking System Emergency Descent System Tubing Explosion-Proof System Fault Diagnosis System Tilt Sensor Alarm Motion Alarm 345° Turret Rotation Horn Hour Meter Charging Protection System Flashing Beacon Drive Enable Charging Indicator Manual Brake Release Lanyard Attachment Point Tie-Down And Lifting Points Platform Load Sense System Emergency Stop Button Swing Out Components Cover

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working range: 3,050 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 220 mm, positioning accuracy: 0.015 mm, input voltage: 400 V, table length: 3,050 mm, operating speed: 250 mm/s, table width: 1,525 mm, pressure: 4,137 bar, positioning speed: 15 m/min, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, table height: 840 mm, operating pressure: 4,137 bar, input current: 77 A, total height: 1,300 mm, total length: 4,210 mm, total width: 2,130 mm, water pressure: 2.8 bar, pump pressure: 4,137 bar, overall weight: 3,850 kg, working length: 3,050 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, 2017 Swiftcut Swift-Jet CNC Waterjet Cutting Machine – Under 900 Hours Use High-Precision CNC Waterjet Profile Cutter – Low Hours, Excellent Condition – Now Available at Used Machine Tools Ireland Ltd 🔍 Overview: We are offering this 2017 Swiftcut Swift-Jet Waterjet Cutting Machine, a top-tier solution for high-precision, cold-cutting of a wide range of materials including metal, stone, plastic, glass, and composites. With less than 900 operational hours, this machine is in superb condition and ideal for any business seeking reliable, accurate, and versatile cutting performance. 🛠️ Machine Specifications: Brand: Swiftcut Model: Swift-Jet Year of Manufacture: 2017 Technology: CNC Waterjet Profile Cutting Cutting Area: [Insert size, e.g. 1250mm x 2500mm if known] Hours Used: Less than 900 hours Pump Type: High-pressure waterjet pump Cutting Method: Abrasive and pure water capability Software: Swiftcut Control Software (user-friendly, intuitive interface) Table Dimensions: 3000 x 1500mm Max Sheet Size: 3050 x 1525mm (10' x 5') Max Traverse Speed: 15m.min Max Z Axis Clearance: 220mm Positional Accuracy: 0.015mm Tank Depth: 840mm Max Pressure: 60,000psi(4137bar) Continuous Pressure: 60,000psi Min. Piercing Pressure: 20,000psi Max Output Flow: 3.8l/min Max Orifice Size: 0.36mm Min Orifice Size: 0.13mm Cutting Water Infeed: 7.6l/min Water Pressure Infeed: 2.8bar Pump Voltage: 400V/77A Pump Power: 37kW/50HP Iedpfowb D S Hsx Afiobc Machine Voltage: 1ph/16A Water Treatment Voltage: 1ph/10A Garnet Hopper Voltage: 1ph/10A Machine Dimensions: 4210 x 2130 x 1740mm Pump Dimensions: 1850 x 920 x 1300mm Machine Weight: 2400kg(empty) Pump Weight: 1450kg 🌟 Key Features: Cold-cutting process – no heat-affected zones, preserving material integrity Precise and clean cuts on a variety of materials and thicknesses Ideal for metal fabrication, signage, engineering, prototyping, and more Compact footprint, easy installation, and low maintenance Exceptional build quality from a trusted UK manufacturer 🔧 Applications: Perfect for cutting: Mild Steel, Stainless Steel, Aluminium Brass, Copper Stone, Granite, Marble Plastic, Acrylic Glass, Rubber, Composite Materials ✅ Why Choose This Swift-Jet? Very low hours – lightly used and well maintained Excellent condition – ready to work immediately Cost-effective alternative to brand new equipment Supported by Swiftcut's strong reputation for service and performance Take advantage of this rare opportunity to own a high-spec waterjet cutting system with low hours – ideal for precision fabrication. Act quickly – this unit won’t last long! Explore Other Waterjet Options Here: Used Waterjet Cutting Machines Used waterjet cutting machine Ireland, Swiftcut Swift-Jet for sale, CNC waterjet profile cutter, low hours waterjet machine, 2017 Swift-Jet waterjet, metal and stone cutting machine, abrasive waterjet cutter, used CNC cutting machines Ireland, high-precision waterjet cutter, used fabrication equipment for sale

Year of construction: 2018, condition: good (used), Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler -Manufacturer: Jiangsu, heat exchanger type SL-421 -Pump: Aulank CPS-20 1.5 kW -Flow rate: 180 l/min -Container: Material stainless steel, with level indicator -Transport dimensions: 1180/780/H760 mm -Weight: 80 kg Ibedoxl R Rnopfx Afiec

Condition: ready for operation (used), Year of construction: 1992, A semi-automatic tube filling and sealing machine Norden Machinery with chute and vacuum tipper is available. Filling volume range: 1ml-300ml, container volume: 90l, filling capacity: approx. 140tubes/min, machine dimensions X/Y/Z: approx. 2500mm/1400mm/2400mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible. Ibsdpfxexn Aagj Afisc

Condition: excellent (used), Item: D-10720-PCI-UF-Pilot-Plant Isdpjihh Spofx Afiebc Ultrafiltration Pilot Plant APV Type PCI-UF 50-100 inclusive pumps, Exchangers, Inventers, tubes and other accessories. Laboratory plant

Condition: new, functionality: fully functional, Year of construction: 2025, loading space volume: 10 m³, Ladies and Gentlemen We have roll-off containers available. Please contact us directly. The delivery time for first deliveries is approx. 1-3 weeks. If you have any questions, please do not hesitate to contact me. Mounting fittings for hook systems according to DIN 30722-1 Floor 6 mm St 37.2 (S235JR) Walls 4 mm St 37.2 (S235JR) Outer castors can be lubricated and replaced Mounting bracket Ø 50 mm, hook height 1,570 mm End profile made of sturdy round tube Ø 90 mm Frame spacing 750 mm Frame profile 80 x 50 mm Pendulum flap Plan and net hooks all round Galvanized ladder according to UVV at the front Container primed and painted in RAL color We also have other types of containers. Contact us and we will prepare a customized offer for you. The bigger the purchase, the better the price! Iodpeu Sh E Rsfx Afisbc

Condition: new, functionality: fully functional, total height: 3,365 mm, total width: 1,800 mm, overall weight: 455 kg, tank capacity: 5,956 l, warranty duration: 12 months, inner diameter: 1,800 mm, TECHNICAL SPECIFICATIONS - Brand : ARSILAC - Model : STOIPSER6200 - Material : INOX 316L - Total capacity : 5 956 litres Ibedpfjwalmvox Afijc - Bottom: flat inclined, 4% slope - Roof: off-centre conical - Interior finish : bright annealed - Exterior finish: brushed ROOF : - 1 hatch diameter 220 mm off-centre with H.300 mm - 1 DN 40 chimney tapping MÂCON with plug VIROLE : - Lifting rings - 1 ladder support - 1 rectangular door 420 × 530 mm positioned 300 mm from the bottom of the shell and opening outwards - 1 partial drain with 100 × 100 square flange, 40 MÂCON stainless steel ball valve and stainless steel plug - 1 DIN15 tasting tap - 1 needle thermometer - 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) - 3 turns of coil on the top of the ferrule - 3 turns of coil on the shell above the door - 2 turns of coil around the door - Total exchange surface area 5.51 m² - Maximum pressure on coil circuit: 1.5 bar - 1 inlet and 1 outlet on each coil circuit, 1‘ 1/4’ male gas connection - 1 connection with immersion sleeve for control probe - 1 identification plate BOTTOM : - 1 total drain with square flange 100 × 100, stainless steel ball valve 40 Mâcon and stainless steel plug - 1 boitard 450 × 100 × 200 mm - 1 connection 50 MÂCON with plug on box - 4 stainless steel feet, height 500 mm, adjusting screw and plate DIMENSIONS - Diameter: 1800 mm - Ferrule height: 2250 mm - Total height: 3365 mm - Weight: 455 kg - Roof thickness : 15/10ᵉ mm - Shell thickness: 15/10ᵉ mm - Bottom thickness: 20/10ᵉ mm

Condition: new, • BEAUTIFUL Batch B choice, unused Round STEEL TUBES • Welded Precision Tubes, smooth inside. • Round Tube 65 x 4 mm. (external x wall thickness) 57 mm. Internal. • 2 bundles Total approx. 70 Pieces approx. L 9 meters • Quality indication E420, No certificate/document. • For questions or ADVICE for this or other steel Mail, Call or App 06 53372021 Pierre Bassa • This is a remaining batch! Also other dimensions in iron and steel possibilities of fully certified from stock and/or factory. • Round Tube 70 x 6.8 mm. (external x wall thickness) internal approx. 56.4 mm. • High blasting quality, according to label CIL FE510C • Tubes are beautiful and smooth inside. Origin Arvedi Italy. • 1 Bundle approx. 29 pcs. approx. L 8 meters Overcomplete beautiful B choice / 2nd choice, as far as optically visible in new condition. • For questions, comments or ADVICE for this material or other steel products, Mail, Call or App 06 53372021 Pierre Bassa • This is a remaining stock! Also other dimensions in iron and steel possibilities of fully certified from stock and / or factory. Ijdpfx Ajiv Amdofiobc Greetings, Pierre Bassa AVUTAS BV / PierreSteelTrade

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 3520244907047, high-pressure hose length: 10,000 mm, input voltage: 400 V, fuel tank capacity: 15 l, The MH 4M hot water high pressure cleaners are perfect for daily use of up to 6 hours for heavy cleaning tasks. Thanks to the improved EcoPower system, these high pressure cleaners are very efficient and quick to clean. Service and maintenance work can be carried out very quickly as all important functions are easily accessible. The diagnostic function of the 4M high pressure cleaners indicates necessary maintenance work. This timely alarm reduces downtime. Four large wheels and ideal weight distribution make it easy to transport the high pressure cleaner on many different floors. Thanks to the jet pipe holder, the rotating hook for easy removal of the power cable and ideal storage of the cleaning agent tanks, the accessories are optimally stowed away. Together with easy access to all important functions, this high pressure cleaner achieves remarkable cleaning results and saves time and money. 4-pole motor, brass cylinder head EcoPower heat exchanger with EcoMode Internal diagnostic function Isdpfx Ajxny S Tofijbc Large water inlet filter to protect the pump from contamination 3 ceramic pistons Flow-controlled control system (not MH 4M-210/1000 X) Oil tank with oil level indicator Low pump oil level warning system Low fuel level warning system Easy to maneuver, supports for transport with forklift Technical data: Weight (kg) 149 Dimensions L x W x H (mm) 1010x700x1016 Fuel tank (l) 15 Pressure (bar/MPa) 210/21 Cleaning effect (kg/f) 5.5 Water output qmax/qiec (l/h) 1000/940 Max. inlet temperature (°C) 40 Water temperature (°C) 90/150 Power consumption (kW) 8.0 Electrical connection value (V/~/Hz/A) 400/3/50/13.5 Power cable (m)5 Ceramic piston 3 Pump speed (rpm) 1450

Year of construction: 2008, condition: excellent (used), Applications : - Water supply, irrigation. - Heating, ventilation and air conditioning. - Pressure groups, cooling. - Water treatment. Advantages: Ijdpjmih Aaofx Afisbc - Easy to install and maintain. - Compact solution for residential and small collective use. - Guaranteed water supply in case of failure of an electric pump. - Assembly, adjustment and testing of the unit carried out directly at the factory. - Flexible operation due to variable speed. Features : - Maximum flow rate: 320 m³/h. - Delivery height: 160 m. - Power range: 2x0.25 kW. - Operating pressure: 10/16 bar. - Ambient temperature: 0°C - +40°C. - Liquid temperature : -10°C - +60°C. - Hydrovar®HVL variable speed drive. Motor : - Power supply: 1 x 230V. - Insulation class: F (155°C). - Protection: IP55. Materials : Pump body and impellers: Stainless steel 304. Collectors: AISI 304 stainless steel. Non-return valves: Brass. Certified for use in drinking water production.

Condition: used, trough conveyor belt conveyor belt with high load capacity total length: 1000cm tape width: 80 cm total width: 122cm steel tube frame structure. steel guide rollers strap thickness: 0.8 cm drive: currently not equipped Ibjdot Aagyepfx Afisc "If required, we can add a geared motor.

Condition: used, Brand: SOCO MC-350 Suitable e.g. for cutting aluminum, brass, copper, PVC and carbon Cutting power tube at 90 °: 101.6 mm Cutting capacity profile, 90 degrees: 76.2 x 127 mm Ijdpfx Aogtmi Usfijbc Saw blade dimensions: 355.6 mm automatic dosing length: 685.8 mm Grades: 2 Shortest cutting length (automatic): 1/4 ”6.35 mm Saw motor: 5 HP 1750 rpm Voltage: 220/3/60