Used Brass Tubes for sale (2,216)

Year of construction: 2016, condition: used, Serial no. 15-3599B, primarily comprising: feed station with 2 product lines, continuous cycle conveyor, 2 forming stations, turning station, micro-lubrication station, through-feed washing machine, Manufacturer: Bous, Model: Duwamat K1000 WSST, Year: 2016, Serial no. 2800, 3 tanks, tank capacities: 485/485/715 l, heating capacity 16–24°, fine filter, oil separator, control cabinets, system control with operator panel, Manufacturer: Siemens, Model: SIMATIC HMI touch, inspection system with 2 cameras, Manufacturer: KEYENCE, Model: Vision System, eddy current testing device, Manufacturer: Rohmann, Model: Elotest IS500, laser marking system, Manufacturer: Videojet, Model: 7510, fiber laser, laser power 50 W, discharge station, roller conveyor system for crate removal, 2 product lines, satellite terminals, switch cabinets, safety devices, plexiglass enclosure, peripheral units, including extraction system, Manufacturer: ESTA, Model: Whispersog 2.2 JET, overnut feeder with loading bunker, vibrating bowl feeder, separation unit, loading station, set of trolleys, set of load carriers, trolleys. Giedpey A Ih Ujfx An Rot Subject to prior sale.

Condition: good (used), Year of construction: 2002, received a new control unit in 2019 for €14,000 max. bending diameter: 63.5 mm smallest bending radius: 32 mm Gjdpfx Anoykl Rzs Roit motor: 30 kW

Condition: used, functionality: fully functional, Year of construction: 2005, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, pipe diameter (max.): 250 mm, pipe length (max.): 6,000 mm, power: 60 kW (81.58 HP), input voltage: 400 V, Equipment: cooling unit, emergency stop, For sale: TRUMPF TUBEMATIC Tube Laser Cutting Machine – Fully Equipped. The machine was used in industrial production and is in full working condition. Professionally dismantled and preserved in complete configuration. Scope of supply: - Bed and mechanical components - Electrical cabinets with original TRUMPF electronics - Drives, control units, power modules - Cooling system (chiller) - Cable tracks, sensors, wiring, etc. Machine technical specifications: X-axis travel: 6500 mm Y-axis travel: 200 mm Z-axis travel: 150 mm Workpiece sizes: Stock length * For manual loading: 141–6500 mm * For automatic loading: 3000–6500 mm Max. finished part length: 2000 mm Min. tube remnant length: 141 mm Wall thickness: 0.8–6.4 mm Round tube dimensions: Ø20–Ø150 mm Square profile dimensions: 20x20–120x120 mm Rectangular profile dimensions: 20x20 – max. oval Ø150 mm Workpiece weight: Max. workpiece weight: 120 kg Max. workpiece weight for unloading station: 40 kg Max. bundle weight: 4000 kg Gisdpfxoyfnble An Rjt Speeds: X-axis: 100 m/min Y-axis: 40 m/min Z-axis: 40 m/min A-axis: 720 º/s Positioning accuracy1: Position deviation: ±0.2 mm Average range deviation: ±0.06 mm According to VDI / DGQ 3441, the measured length is 1 m. Processing accuracy depends on material type, its preprocessing, dimensions, and position in the working area. Control system: CNC TRUMPF – Siemens Sinumerik 840 D Total weight of the basic machine configuration: 15,460 kg Laser data: TRUMPF TLF CO₂ laser with high-frequency excitation – TLF 2000 Guaranteed max. laser power (programmable in 1% steps): 2000 W Pulse repetition rate: TEM00 Gas consumption: Laser gases *CO₂ – 1 l/h *N₂ – 6 l/h *He – 13 l/h Cutting gases *O₂ – depending on application *N₂ – depending on application Laser cooling: closed circuit Maximum power requirement for full system: 63 kW/h Pneumatic connection: 7–10 bar

Condition: ready for operation (used), GASTEC Detector Tubes indicate concentrations directly by way of a calibrated scale printed on the tubes. At GASTEC, we endeavour to achieve highest quality detector tubes for analysing airborne gases/vapours, as well as pollutants in soil and water through our advanced state-of-the-art research and development. Through our efforts we have acquired a solid reputation among our customers in virtually all sectors of industry, commerce and society. Tubes are now available for more than 500 different applications. Gsdsy D D Tcjpfx An Rjit

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, tube wall thickness (max.): 2 mm, bending radius (min.): 90 mm, number of axes: 3, total length: 5,500 mm, total width: 1,600 mm, total height: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, 3 Axis 65 CNC Mandrel Tube Bending Machine TROX Liv Makina's most powerful machine is the CNC mandrel tube bending machine capable of bending tubes and profiles up to 65 mm with 3 axes, suitable for bending jobs in the Shipbuilding Industry, Thermal Power Plants, Park and Garden Furniture, Fitness Equipment, and Exhaust Industry sectors. Gjdpfxey Dpgze An Rjit What is difficult becomes easy thanks to hydraulic bending.  Ability to import drawings via Solidworks Program  Operation in fully automatic or manual modes via interactive PLC control system  Multiple language options  Ability to view products in 3D  3D pipe collision simulation  Automatic pipe length calculation  Conforms to CE norms  Ability to see errors on display  Safety warning system  Easy usability thanks to Livmak Interface Technical Specifications – TROX 3Axis 65 CNC Max Bending Capacity: Ø65 mm x 2 mm Min/Max Mold Diameter: 90/250 mm Material Processing Length: 4000 mm Machine Dimensions: 5500x1750x1750 mm Total Motor Power: 15 Hp Machine Weight: 3 Tons

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: electric, tube wall thickness (max.): 2 mm, bending radius (min.): 60 mm, number of axes: 5, working height: 1,500 mm, overall weight: 2,700 kg, total length: 5,500 mm, total width: 1,800 mm, total height: 1,800 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, 5 Axis 38 CNC Mandrel Tube Bending Machine PUMA Gedpfjy Dpgnex An Roit Liv Makina’s 5-axis 38 mm CNC mandrel tube bending machine is one of the company’s models with the highest number of references spanning four continents in the Automotive, White Goods, and Defense Industry sectors. Its Solidworks-compatible interface ensures highly user-friendly operation. Our Industry 4.0-compliant machine provides daily reporting directly to your team. Thanks to its rolling die, the machine is capable of coiling tubes like a spring. Its feature of accommodating dies with 3 different radii makes even the most challenging bends much easier. The collision simulation software, which allows users to preview the bending process on-screen and helps save time, is provided free of charge on all of our CNC tube and profile bending machines.  Ability to import drawings to the machine via Solidworks  Fully automatic and manual operation modes with interactive PLC control system  Multiple language options  3D program visualization  3D pipe collision simulation visualization  Automatic tube length calculation  Compliant with CE standards  Error display on screen  Safety warning system  Easy operation via the Livmak interface Technical Specifications – PUMA 5 Axis 38 CNC Max Bending Capacity: Ø38 mm x 2 mm Min/Max Die Diameter: 60/250 mm Material Processing Length: 4000 mm Machine Dimensions: 5500x1600x1600 mm Total Motor Power: 15 Hp Machine Weight: 2.5 tons

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, Equipment: documentation/manual, Ercolina ECO 50 V1T is a professional and reliable pipe and profile bending machine. Compact, durable, and easy to operate, it is designed for precise bending of steel, stainless steel, aluminum tubes, as well as square and rectangular profiles. Gisdpfx Ansxdnx Hs Rjt This unit is used but in good working condition, fully tested and ready for operation. ⚙️ Technical Specifications* Model: Ercolina ECO 50 V1T Max. pipe diameter (steel): up to Ø 50 mm Max. square profile: up to 40 × 40 × 3 mm Max. round hollow profile: up to Ø 48 × 3 mm Minimum bending radius: from ~80 mm (depending on tooling) Bending angle: up to 190° (programmable) Control: electronic (V1T version – with digital angle setting and memory) Motor power: approx. 1.5 – 2.2 kW Power supply: 400 V, 3-phase Dimensions: ~1100 × 600 × 1200 mm Weight: approx. 250 – 300 kg ✅ Key Features High-quality Italian brand ERCOLINA. Bending up to 190° with programmable radius. Compact and robust construction. Electronic angle setting with memory for fast and accurate production. Suitable for both one-off jobs and serial production. Used but tested and in good working condition. 🎯 Applications Pipe and profile production Railings, furniture, and metal structures Metalworking workshops Small and medium industrial companies

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 10 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bodor, controller model: BodorThinker, laser type: fiber laser, laser source manufacturer: Boder, laser source model: Bodorpower Genius, laser hours: 5 h, laser power: 3,000 W, laser wavelength: 1,064 nm, pipe diameter (max.): 220 mm, pipe length (max.): 6,500 mm, working height: 850 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 120 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 30 m/min, cutting speed: 60,000 mm/min, positioning speed: 100 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 200 kg, power: 22.5 kW (30.59 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 6 bar, overall weight: 4,500 kg, total length: 9,000 mm, total width: 2,000 mm, total height: 2,200 mm, Equipment: CE marking, Bodor K1 Tube Laser Cutting Machine – 3 kW Fiber Laser The Bodor K1 is a compact and cost-effective tube laser cutting machine designed for precise processing of round, square, and special profiles. Equipped with a 3 kW fiber laser, it is ideally suited for small to medium material thicknesses and delivers excellent cutting quality while ensuring efficient energy use. Thanks to advanced CNC control and intuitive software, the K1 offers easy operation and quick setup times. The machine stands out with its high dynamics, precise positioning, and reliable handling of a wide variety of metal profiles. Gjdpfey A Hntex An Rsit Ideal for metal fabrication, contract manufacturing, and entry-level automated tube processing.

Condition: used, Year of construction: 1987, tube Ø: 10 - 50 mm wall thickness: 1 - 6 mm reference material (tensile strength): 400 N/mm² speed: approx. 120 m/min Gjdpfeg I Di Eex An Roit

Year of construction: 1987, condition: used, tube Ø: 10 - 50 mm wall thickness: 1 - 6 mm Gjdjg I Di Nspfx An Reit reference material (tensile strength): 400 N/mm² speed: approx. 120 m/min

Condition: ready for operation (used), Year of construction: 1966, A Häusler rolling and bending machine is available. Number of rollers: 3, section modulus: 46cm², max. flat material capacity at 1000mm: 100mm/20mm, max. pipe capacity at 900mm: 102mm/6mm, max. square material capacity at 600mm: 60mm/60mm, max. T-profile capacity at 1200mm: 1200mm/1200mm/13mm, shaft diameter range: 125mm-135mm, machine dimensions X/Y/Z: approx. 4500mm/1700mm/1500mm, weight: approx. 6500kg. An on-site inspection is possible. Gsdpfxjy Ax U Ee An Reit

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 500 h, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, pipe length (max.): 3,000 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 180 °, overall weight: 300 kg, power: 1.5 kW (2.04 HP), input voltage: 220 V, input current: 12 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, Metalworking company sell megabender 030 In the equipment have mandrels for tube: 60,3mm x 2mm R120 50mm x 2mm R75 40mm x 2mm R60 32mm x 2mm R100 700 kg - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic design (3000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle Gjdpfx Anev Di Dns Rjit Stainless steel 2mm steel 3mm cooper and aluminium up to 4mm

Condition: new, Year of construction: 2025, Laser power: 6000 Watt Round tube: 20 - 350 mm Square tube: 20 x 20 - 350 x 350 mm Rectangular tube: 20 x20 - 350 x 350 mm Max. positioning accuracy X,Y axis: 0,05/1000 mm Max. positioning accuracy U axis: 0,05/1000 mm Max. steel: 14 mm Max. stainless steel: 10 mm Max. aluminium: 10 mm max. tube weight: 1200 kg Length: 17296 mm Width: 4271 mm Height: 2933 mm Gedpoxgc Arjfx An Rjit

Condition: new, Year of construction: 2025, functionality: fully functional, BAYKAL LASER TUBE CUTTING MACHINES: BLT 2D or 3D cutting, from 1 kilowatt to 6 kilowatts, laser tube cutting machine for superior quality, no need for sawing, drilling or deburring. BAYKAL BLT 2D or 3D Lasertubes is a fast and flexible tube laser cutting machine with 6 meters and 8 meters size options and a cutting option XXL pipes up to 220 millimeters and rectangular tubes up to 220 by 220 millimeters , wall thicknesses of up to 10 millimeters for mild steel. Important technical information for BAYKAL BLT 2D or 3D Lasertubes; Maximum outside diameter of round tube in millimeters: 220 Maximum outside dimensions of rectangular tube in millimeters: 220 by 220 Maximum workpiece weight in kilogram/meter: 70 Technical specifications for loading; Load 1 ( front rear ): Bundle Load 2 ( front rear ): Semi auto load Load 3: Manual Minimum loading length (meter): 2 meters Maximum unloading length (meter): 4 - 6 meters Bundle loading capacity (kilogram): 3500 kilogram Technical specifications for unloader; Three programmable positions, rear conveyor belt and motorized front and rear collection tables. Unloading length (meter): 4 - 6 meters Gisdsrt Huropfx An Ret

Condition: good (used), Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires -Manufacturer: Bridgestone, J-Lug tire with inner tube -Tire size: 7.50-15 -Quantity: 1 tire available Giodpsyx S Taofx An Rot -Dimensions: Ø 775 x 185 mm -Weight: 37 kg

Condition: excellent (used), Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Revolver-adjustment: 12-positions Mandrellength: 4500 mm Sets of bendingdies: - Ø 22 mm - Ø 25 mm - Ø 48 mm Featured with: - 3 Mandrels - Mandrel retraction unit - Footpedal - Bendingspeed controller Country of origin: The Netherlands Motor power: 7,5 kW Machine LxWxH: 5350 x 1100 x 1100 mm Machine weight: 2300 kg Giodpfx Anen Smq Io Rot

Condition: used, Bending capacity: Ø45 mm Bending angle: 0 - 180° Revolver-adjustment: 8-fold adjustable angles Mandrellength: 4000 mm Sets of bendingdies: Gijdjq Nipyjpfx An Ret 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Featured with: - 4 Mandrels - Mandrel retraction unit Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg

Condition: like new (used), functionality: fully functional, filling weight (max.): 50 g, filling weight (min.): 1 g, overall weight: 50 kg, Various types of machinery for sale due to company liquidation. Check out my other listings too! . Giodpfjy Ahifox An Rst Custom-made glitter powder dispenser for sale. Works perfectly. Features multiple adjustment options.

Condition: used, functionality: limited functionality, Year of construction: 2002, control type: CNC control, degree of automation: automatic, controller model: VGP3D, pipe diameter (max.): 42 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 2 mm, bending radius (max.): 120 mm, mandrel length: 6,000 mm, number of axes: 5, overall weight: 7,000 kg, Equipment: centralized greasing system, documentation/manual, emergency stop, We offer this used CNC tube bending machine BLM DYNAM4, right/left, year of manufacture 2002. Manufacturer: BLM Model: DYNAM4 Serial number: 482020102005 Year of manufacture: 2002 Weight: 7000 kg Technical specifications: - CNC control: VGP3D – advanced 3D graphical programming software dedicated to tube and rod bending. - Number of controlled axes: 5. - Maximum tube diameter: 42 mm. - Maximum wall thickness: 2.5 mm. - Maximum bending radius: Rm 120 mm. - Bending length: Factory-extended machine, allowing for tube bending up to 6 meters with mandrel – a rarely offered option. - Bending direction: Capability to bend both left and right, enabling the production of highly complex parts. - Additional features: Simultaneous bending and roll bending of arcs. - Machine weight: 7 tons (dry weight). - Light barriers - Metal fencing - Tooling package (on pallet) Service work performed: Gjdpfx Aoyzy U Den Rsit - The machine has been thoroughly cleaned. - Oil has been flushed and replaced. - Approximately 90% of hydraulic hoses were replaced. - Valve plates have been resealed. - Main motor has been rewound. If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, operating hours: 76,447 h, machine/vehicle number: 605970300001, controller model: DOC 85C, number of axes: 5, overall weight: 1,500 kg, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Average output: approx. 2,400 sheets/hour Bending capacity round tube R = 45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R = 35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Brass: 4 - 18 x 1.25 mm Positioning speed X-axis: 2,000 mm/s Bending speed H/Z Y-axis: 500 °/s Rotation speed Z-axis: 900 °/s Rotation speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T-axis: 0.1 mm Measuring tolerance Y/Z/Q-axis: 0.1 mm Maximum reach at maximum acceleration X-Y-Z: 1,000 mm - 90/90/0 - with tube 18 x 1.25 mm MACHINE DETAILS Control: DOC 85C Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1,500 kg Gisdpfx Aeyzyh Dsn Ret Operating hours: 76,447 h EQUIPMENT BLM bar feeder BLM CARM 7 Note: The machine is sold without conveyor belt and safety fencing.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 611080402022, Equipment: bar feeder, TECHNICAL DETAILS Axis Speeds Gedpfjyzya Tsx An Rjit Positioning speed X-axis: 2,000 mm/s Bending speed Y-axis: 400 °/s Rotational speed Z-axis: 900 °/s Rotational speed R-axis: 110 °/s Positioning speed T-axis: 400 mm/s Tolerance Tolerance X-axis: ±0.05 mm Tolerance T-axis: ±0.05 mm Tolerance Y-axis: ±0.05° Tolerance Z-axis: ±0.05° Tolerance R-axis: ±0.05° Bending Capacity Round profile (R = 35 kg/mm²): min. Ø 4 mm, max. Ø 22 x 1.5 mm Round profile stainless steel: min. Ø 4 mm, max. Ø 20 x 1.5 mm Round profile (brass/aluminium/copper): min. Ø 4 mm, max. Ø 28 x 1.5 mm Average output: 1,700–2,000 bends/hour MACHINE DETAILS Hydraulics System Tank capacity: 80 l Pump delivery rate: 13 l/min Pressure MR200E: max. 140 bar Ambient Conditions Ambient temperature: 5 to 40 °C Storage temperature: max. 70 °C, 24 h Relative humidity: 5 to 75 %, 24 h Electrical Data Supply voltage: 400 V ±5 % Power type: Three-phase without neutral Frequency: 50 Hz ±0.1 % Connected load: 9.5 kVA Rated current: 15 A Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,100 x 1,530 mm Machine weight: 1,850 kg EQUIPMENT BLM bar feeder BLM CARM 7 Bar feeder weight: 650 kg Conveyor belt Note: The machine is sold without safety guards.

Condition: ready for operation (used), * Brand: AEG / Aviteq * Model: vibrating chute * On stock: 2 pieces * 1 x: length 3000 mm - diameter 500 mm Gjdjywmb Ajpfx An Rjit * with: two pieces vibration motors of each 1,3 kW * 1 x: length 5900 mm - diameter 500 mm * with: two vibration motors of 2.3 kW each

Year of construction: 1980, condition: used, machine/vehicle number: 80246, max. tube-Ø: 60,3 x 3,2 mm Gjdpfx As N Hfpsn Reit max. bending angle: 180 ° arbor rest length: 3000 mm electrical connection: 380 V, 8,6 kW space needed: 2400 x 5700 x 1500 mm weight: ca. 2500 kg

Condition: excellent (used), Pipe bending machine Rothenberger system Bending capacity: 2 7 bending dies for pipes 3/8 - 1/2 - 3/4 - 1 - 1 1/4 - 1 1/2 - 1 3/4 - 2 Footprint: Width: 630 mm Length: 680 mm Gsdpfxeyv A H Ej An Rsit Transport case dimensions: Width: 700 mm Depth: 300 mm Height: 360 mm Weight: 80 kg

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 24 h, Make: DURMA Type: HD-TC 60170 Fiber Year of construction: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 Watt Control: Siemens Sinumerik 840D Operating hours: 24 h Max. pipe diameter: 170 mm Min. pipe diameter: 20 mm (12 optional) Max. Square profile dimensions: 120x120 mm Max. Dimensions of rectangular profiles: 150x100 mm Max. Profile length: 6500 mm Min. profile length: (for automatic feed) 3000 mm Max. Profile weight: 37.5 kg/m Max. Material thickness: (for 2 kW) 8 mm Min. material thickness: 0.8 mm Length of the last inserted part: 185 mm Gisdpfx Anedx Nfwo Rjt Positioning accuracy: +/- 0.20 mm Repeat accuracy: +/- 0.05 mm Max. Loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical H,C,U,L *Installation area L/W/H: approx. 16000x7400x2350 mm * Weight: approx. 20000 kg * depending on equipment variant Standard equipment Sinumerik 840D control system Autofocusing PRECITEC Procutter cutting head F150 focus Manual unloading table Manual loading Laser diode for defining position points Central lubrication Chip conveyor External user interface for the output of analog values (power-speed-pressure) External CAD/CAM programming software Lantec with autonesting Work area lighting Warning light Various laser cutting options selectable Remote control: remote maintenance access via LAN connection or WLAN CE marking Extended equipment IPG fiber laser source 2000 Watt (incl. cooler) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.