Used Brass Tubes for sale (2,339)

Condition: used, This listing is for a Labnet Vortemp S2056A Shaking Incubator The unit is in full working condition and is ready for immediate release The Labnet Vortemp S2056A is a versatile shaking incubator designed for simultaneous heating and mixing of small samples. It is ideal for applications in biochemistry, microbiology, and clinical laboratories. Key features include: Interchangeable Platforms: Microplates: Accommodates up to 4 standard or 2 deep well microplates. Microtubes: Accommodates up to 56 x 1.5/2.0 mL tubes. Precise Digital Controls: Time: Precise digital control for accurate timing. Temperature: Temperature range of ambient +5°C to 60°C. Speed: Speed range of 200 to 1200 rpm. Mechanical Convection: Ensures uniform and stable heating throughout the incubation process. Cold Room Compatible: Suitable for sub-ambient applications, making it versatile for a wide range of laboratory settings. Construction and Operation Housing: Constructed of steel plate coated with highly resistant polyurethane lacquer. Kdodpfx Asxv D Diohbeu The interior chamber is isolated with special thermal protection materials and insulation foam. Mechanism: The motor drives the eccentricity control mechanism, generating the orbital motion of the sample platform. The temperature and shaking mechanism are regulated via microprocessors for precise control

Condition: new, Year of construction: 2025, functionality: fully functional, The A3 is the standalone series of portable measuring arms from the Trimos A-Line. Its key feature is its compact size, allowing you to take it anywhere without needing to assemble it. The 6-axis configuration arm is available with measuring ranges of 1.3 m and 1.8 m. Carbon fiber tubes and an aluminum mounting base give the A3 arm an extremely stable yet lightweight construction. With its mass balancing system, outstanding handling is guaranteed. The most precise range Extreme portability No special set-up required Autonomous operation thanks to the integrated wireless system Fixed or interchangeable probe Permanent counterweight for perfect, stable, and long-lasting balance Integrated Bluetooth system USB connectivity option Buttons mounted on the probe for improved measurement sensitivity A3 Models: A3 - 1300 Measuring range (m): 1.3 Axes: 6 Accuracy (mm): 0.016*1 Weight (kg): 9.5 A3 Models: A3 - 1800 Measuring range (m): 1.8 Axes: 6 Accuracy (mm): 0.020*1 Weight (kg): 10.4 Kjdpfx Aew Dzxvohbedu Operating temperature: +5 to +40 °C Relative humidity: 90% non-condensing Conformity mark: CE Power supply: 110 - 220 V / 50 - 60 Hz Ingress protection: IP 54 Connectivity: Bluetooth and USB Battery autonomy: >8 h Certification: ISO 10360-12 up to 3.2 m      ISO 10360-2 above

Condition: good (used), Year of construction: 2002, machine/vehicle number: 526-02514, functionality: fully functional, DoALL 2013-V3, 2013-V3 Vertical contour band saw Manufacture DoAll sawing Products U.S. Year of manufacture: 08/2002 S/N 526-02514 CE marked Kodpfx Ahsu A Ikhobodu Variator drive Max. Working height 330 mm Maximum width up to the column 508 mm Capacity of the machine: b 20″ x b 13″ (508mm x 330mm) These vertical machines are one of the most versatile machines on the market! Vertical contour saws for cutting aluminum, brass, copper, mild steel, tough tool steel, stainless steel and sheet metal as well as cutting plastics and fiber materials. They are also available with a variety of attachments that allow for cutting contours, slices and more. The 2013-V2 has the same main structure, capacity and features as the 2013-V3. The only difference is the power of the motor: 2013-V3: 2.2kW/3HP, 400V, 50 Hz Standard equipment One set of high-speed guide blocks with inserts for belts from 3 to 13 mm One set of steel guide inserts for belts of 6, 10 and 13 mm Belt speed indicator Removable chip tray Belt tension indicator Chip blower (requires factory air) Handwheel for lifting the column AC drive with variable speed (speed control, soft start and dynamic braking functions) Belt door interlocks Dual range gearbox Gear oil One bi-metal band saw blade Operating instructions and spare parts manual

Condition: defective spare-parts repository (used), Year of construction: 2009, For sale is a defective Trumpf 7036 tube bending machine, manufactured in 2009. The screen remains blue (blue screen error). Kodpfx Ajz Rknpehbjdu

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension, Beavertail rear, Ramp Equipment: - Spare wheel - Shovel holder - Loading ramp Net: €5,621.85 / Gross: €6,690.00 Article number: VB4235401810.02 Technical data: • Brand: Variant • Model: 3518 B4 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 400 x 180 x 30 cm • External dimensions (L x W x H): 600 x 234 x 168 cm • Loading height of the floor: 30 cm • Permissible total weight: 3,500 kg • Tare weight: 815 kg • Payload: 2,685 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/60R12C • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced aluminum diamond-plate fenders, walkable • Lateral grid steps, non-slip • Screen-printed plywood floor, 18 mm, non-slip and waterproof • Extremely stable, welded grid tube frame • Frame completely hot-dip galvanized • Steel loading ramp, upright on shaft, 130 cm • Stable eccentric locks • Support blocks on loading ramp • Very low chassis for a low loading angle • Beavertail rear / low loading for work platforms and excavators • Excavator bucket holder at the front • Spare wheel, mounted under the excavator bucket holder • 10x lashing eyes mounted in the outer frame (1000dAN/kg) • 8x lashing points on the inside • Parabolic axle from KNOTT • Parabolic axle for absolute heavy-duty use • Reverse automatic • KNOTT inertia brake and parking brake • Lockable tow hitch Kdjdpfx Ahsyyw N Ajbju • Spare wheel, mounted under the excavator bucket holder • Very stable, bolted V-drawbar, REINFORCED • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Rear marker lights at the rear with rubber arm • Heavy-duty support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: refurbished (used), Year of construction: 2024, cooling capacity: 68 kW (92.45 HP), type of cooling: air, overall weight: 870 kg, temperature: 7 °C, Fully refurbished FAS 096 refrigeration unit for industrial applications. The unit is designed for outdoor installation. The FAS 096 is equipped as follows: closed, internal tank, a 3-bar pump, and scroll compressors from the manufacturer Bitzer. The refrigerant used is R454B. Kdsdpfxjtw U Dqe Ahbsu The evaporator is a tube bundle installed inside the internal tank. Refrigeration capacity at 12/7°C and an ambient temperature of 35°C: 68 kW.

Condition: refurbished (used), Young, fully refurbished refrigeration unit HAS 700 Kedpfx Asz Rpnbohbsdu The HAS 700 is specifically designed for industrial process applications. The refrigeration unit features a shell-and-tube evaporator and a 500-liter tank, EC fans, process temperatures down to -12°C, and is operational up to an ambient temperature of -10°C. It also includes a compressor sound enclosure and uses R454B refrigerant. Refrigeration capacity at 12/7°C and an ambient temperature of 35°C: 625 kW.

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection Kdsdpfxez Rl Hys Ahbju - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: good (used), Year of construction: 1977, functionality: fully functional, - 6 spindles - max. bar diameter: 32.0 mm Kdjdpsz Iz D Ijfx Ahbou - guide tubes - chip flushing system - accessories: cams + gears - SEMA bar feeder bundle (1989)

Condition: new, Sales from STOCK! Model: AMWP11.2-8100 Max. Working Height: 11.2 m Max. Platform Height: 9.2 m Max. Horizontal Reach: 3 m Up and Over Height: 7.89 m Guardrail Height: 1.1 m Overall Length: 2.53 m Overall Width: 1.0 m Overall Height (Stowed): 1.99 m Platform Dimension: 0.62 x 0.87 m Ground Clearance (Stowed): 70 mm Ground Clearance (Raised): 19 mm Wheelbase: 1.22 m Loading Capacity: 200 kg Occupants: 2 Turning Radius (Inside/Outside): 0.23 / 1.65 m Turret Rotation: 345° Jib Movement: 130° Travel Speed (Stowed): 4.5 km/h Travel Speed (Raised): 0.5 km/h Kdsdpfjulakksx Ahbsu Up/Down Speed: 42/38 seconds Max. Working Slope: X: 2.5° / Y: 2.5° Tyres: Ø 381 x 127 mm Driving Motor: 24 V / 0.9 kW Lifting Motor: 24 V / 3.3 kW Battery: 24 V / 240 Ah Charger: 24 V / 30 A Weight: 2950 kg AC Driving Motor Proportional Joystick Controls Self-Locking Gate Drivable At Full Height Non-Marking Tyres 4 x 2 Drive Automatic Braking System Emergency Descent System Tubing Explosion-Proof System Fault Diagnosis System Tilt Sensor Alarm Motion Alarm 345° Turret Rotation Horn Hour Meter Charging Protection System Flashing Beacon Drive Enable Charging Indicator Manual Brake Release Lanyard Attachment Point Tie-Down And Lifting Points Platform Load Sense System Emergency Stop Button Swing Out Components Cover

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device Kdjdpjxz Dqmjfx Ahbsu • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, MLS Lanny DDM Pressure Control System PN40 – 2x Shut-off Valve – 24V – NEW / UNUSED Offered for sale is a new, unused, high-quality industrial pressure control system from MLS Lanny GmbH, featuring a dome-loaded pressure regulator, two pilot-operated shut-off valves, and an electronic proportional control valve. This system is a professional, specialized assembly designed for industrial pressure and fluid technology applications. It is particularly suitable for mechanical and plant engineering, industrial pressure regulation, test bench technology, and as a spare part for existing industrial installations. The complete unit is constructed from robust, precision-engineered aluminum and brass components. Technical Specifications and Equipment 1. Dome-loaded pressure reducer – MLS Lanny GmbH Type: DDM D0 A0 (per nameplate; partially difficult to read) Pressure range: 0–20 bar Ratio: 1:4 Nominal pressure: PN40 Nominal size: DN54 Electrical control: 24 V DC 2. Two shut-off valves with pilot control Manufacturer: MLS Lanny GmbH Shut-off valves: PN40, DN35 Pilot valves: PN10 Operating voltage: 24 V DC Power consumption: 3 W per pilot valve Quantity: 2 complete valve units 3. Electronic proportional control valve Manufacturer: MLS Lanny GmbH Model: EFL1B99Ju V2_IP54 Operating voltage: 24 V DC Current consumption: 1.2 A Setpoint signal: 0–10 V Protection rating: IP54 Serial number: 137170 Design: Control valve with flange connection Condition NEW – UNUSED – STOCK ITEM The complete pressure control system is new and has not been put into operation. Minor surface marks resulting from storage may be present; these are visible in the original photos. The system is in the condition shown and is offered as a complete, pre-assembled unit. A recent functional and leak test has not been performed. Key Features High-quality industrial design by MLS Lanny GmbH Complete pressure-regulating and shut-off valve unit Two pilot-operated (electric) shut-off valves Kodpfsz R D Ntjx Ahbodu Electronic proportional control valve with 0–10 V setpoint signal Rugged aluminum and brass construction New and unused Ideal for mechanical engineering, plant construction, maintenance, and industrial spare parts supply Scope of Delivery Includes the complete MLS Lanny pressure regulation system shown, consisting of a dome-loaded pressure regulator, two pilot-operated shut-off valves, an electronic control valve, and assembled connecting components. Supplied as shown in the original images.

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Kdedpfswz Rifox Ahbou Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: used, Year of construction: 2016, Conveyor system for bulk solids Bulk solids conveying system using a flexible screw. The system comprises a FLEXICON stainless steel hopper with a pyramidal bottom, support legs and capacitive level sensor. UTFS-S045-010-X tubular conveyor, approximately 2 m long, fitted with a 114 mm diameter UHMW polyethylene outer tube and flat profile flexible internal screw. Discharge head with DRP-02214T-05-X geared motor. The drive incorporates a 2.2 kW three phase motor operating at 1,425 rpm and 50 Hz, with IP55 protection. The system is ATEX II 3D T125 certified, suitable for operation in Zone 22 environments containing combustible dust. Designed for conveying pellets, plastic granules, powders and other solid products with minimal segregation of blended materials. Kjdpfx Ahez R Auuobedu

Condition: new, functionality: fully functional, power: 26 kW (35.35 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 630 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 200 rpm, rotational speed (min.): 20 rpm, total height: 2,700 mm, total length: 2,650 mm, total width: 4,385 mm, overall weight: 6,500 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, Advantages of the High-Performance Bandsaw HBM540A Kdjdpfxjz Rzq Is Ahbeu SpeedCutting Technology (optional) By combining SC-Performance saw band guides, a high-performance coolant system, dynamically controlled feed rate, and a specially optimized auto-feed control, you can achieve maximum performance and tool life from the saw band used. Prepared for Automation A powerful sawing machine concept places high demands on material handling. The high-performance bandsaw automatons of the HBM series are often configured as automated sawing centers. Therefore, the machines are already equipped in the basic version to connect extensive peripherals. Servo Feed System The saw feed is carried out by means of a ball screw and a servo motor. This results in significantly shorter idle times and more precise feed rates. Your advantage: higher cutting performance and longer band life! Sensitive Behringer Cutting Pressure Control increases the cutting performance when sawing tubes and profiles, as it automatically adjusts the saw feed of the industrial saw to the changing material cross-sections. Due to its arrangement directly at the back of the saw band, the system regulates quickly and precisely. Optimal Chip Removal The highest cutting performance of the industrial saw places high demands on chip removal. The wide, funnel-shaped machine stand allows for free chip flow into the underlying chip conveyor with an integrated coolant tank. The discharge height of 800 mm or optionally 1,200 mm allows the use of large chip containers. Economical Use of Carbide Saw Bands due to the robust design of the industrial saw, the use of the latest servo technology, and well-planned chip removal. Precise Guide System in Portal Design The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best cutting results and maximum service life of the bandsaw. Band-Guiding Parts Made of Gray Cast Iron are made by Behringer and ensure vibration damping directly at the cutting interface, thereby increasing the tool life. Automatic Guide Arm Adjustment This means that the metal bandsaw offers optimal sawing results without adjustment effort - even with frequently changing material widths.

Condition: good (used), Franz Haas Wafer Stick Baking Oven, Model EWB 1/1, completely refurbished. The machine is constructed from ASIS 304 stainless steel (with the main frame made of carbon steel). The oven is equipped with a rotating ring, which has adjustable speed control to achieve the desired baking characteristics for the wafer sticks. The ring has been cleaned and checked (re-aligned), and the supports/bearings are brand new. Fans have been replaced with new units. The exhaust outlet and flange have been replaced for quick installation. The machine comes with two extruders with bushings for ribbon forming and tube diameter shaping. Equipped with a cutting knife featuring a pneumatic actuator and photoelectric sensor for precise cutting (tube length adjustment is possible). The oven includes a stainless steel batter tank mounted on a frame with a trolley. Fitted with pumps that feed batter from the tank onto the ring surface. Kedpfxjywgaxo Ahbsdu Comes with a new control panel and a new gas pressure regulator. Speeds of the ring and pumps are adjustable via frequency inverters. Dimensions: length 3200 mm, width 1400 mm, height 1700 mm. The machine is powered by natural gas, high-methane type, symbol E (previously GZ 50). Electrical requirements: 3x400V / 16A, consumption approx. 2.5/3 kWh. The machine has undergone a complete overhaul. All thermal elements have been replaced with new, environmentally-friendly components—resulting in lower gas consumption and enhanced efficiency. Output: approx. 120-150 kg per 8 hours.

Condition: new, Goetze 618tGFO DN15 Overflow Valve, Control Valve, NBR, Red Brass New spring-loaded overflow and control valve from Goetze in an angular design for protecting pumps from overload and for pressure regulation in industrial plants. Manufacturer: Goetze Series: 618 Type: 618tGFO-15-f/f-15/15 NBR Valve type: Overflow and control valve Design: Angular Kdodpfjz Rv Ibsx Ahbeu Spring cover: Gas-tight design Back pressure compensation: No Ventilation: Without Nominal size: DN 15 Connection inlet: G 1/2 inch internal thread Connection outlet: G 1/2 inch internal thread Connection standard: DIN EN ISO 228-1 Housing material: Red brass CC499K Internal parts: Brass / Red brass Spring material: Stainless steel 1.4310 Seal material: NBR Seal type: Elastomer flat seal Temperature range NBR: -30 to +130 °C Media: Gaseous and liquid media Installation dimension L: 29 mm Overall height H: 74 mm Wrench size SW: 28 mm Weight according to manufacturer: approx. 0.4 kg Condition: New Quantity: 2

Condition: excellent (used), Year of construction: 2021, HT45-G3-SM2Y/FANUC WITH POWERED TOOLS AND Y-AXIS CNC turning machine for complete machining of turning-milling parts with 2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes, integrated spindle motors on Kedpfxsz Rzh Hj Ahbodu main and counter spindle (water- cooled), pre-tensioned roller guides. Drive power: Main spindle - 15 kW Counter spindle - 15 kW Speed range: Main spindle 0 – 7000 min-1 Counter spindle 0 – 7000 min-1 Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar diameter ø 45 mm) Counter spindle: KK5 Y-axis: • Travel range: +40/-40 mm • Rapid traverse speed: 15 m/min Includes: • Draw tube on the main spindle • Pull rod for the main/counter spindle • Mechanical spindle brake (main/counter spindle) • Part ejector and flushing through the counter spindle • Fanuc 31i-B control - EMCONNECT/APP based user interface - Manual Guide i dialog programming - 22" Multi-Touch Display - USB interface - Network drive / Ethernet - 3D Simulation - LED status bar, and more • 2x 12-position tool turret VDI 25 radial with direction logic for up to 2x12 powered tool stations (HSC turret)! Swivel speed adjustable with feed switch! Performance data: - Max. speed: 8000 rpm - Max. continuous speed: 6000 rpm - Max. drive power: 4 kW - Max. torque: 16 Nm - C-axis for main and counter spindle - TRANSMIT software for easy C-axis programming • Chip conveyor with a discharge height of 1100 mm, programmable (Type "hinge belt") • Coolant system integrated in the chip conveyor 2 high-pressure pumps with 14 bar 2 flushing pumps with 3.7 bar • Air gun with spiral hose • LED machine room light • Hydraulic unit • Vibration-damping leveling feet • Mounting angle and high-performance anchors • Documentation / CE certificate Year of construction: 2021 Machine no. S3K212051 Includes: various accessories

Condition: excellent (used), TETRA PAK A3 FLEX 1000 B ASEPTIC FILLING MACHINE – 500 ML FORMAT Industrial aseptic filling machine, TETRA PAK A3 FLEX 1000 B, configured for the automatic packaging of liquid food products in 500 ml multilayer cardboard Tetra Brik Aseptic containers. The machine uses aseptic forming, filling, and sealing technology, integrating the sterilization of the packaging material, the formation of the brick, the dispensing of the product, and its hermetic sealing into a single machine. Tetra Pak A3 Flex technology is designed for the industrial packaging of previously sterilized products, allowing for the production of long-life beverages without the need for refrigeration before opening, provided that the required processing and sterility conditions are met. MAIN FEATURES - Manufacturer: TETRA PAK - Model: A3 FLEX - Version: 1000 B - Filling format: 500 ml - Type: Automatic aseptic brick filling machine - Packaging: Tetra Brik Aseptic Kdjdpfxoz Rzids Ahbsu - Automatic forming, filling, and sealing system - Continuous feed of packaging material via reel - Sterilization of packaging material - Formation of multilayer cardboard packaging - Filling of previously sterilized product - Longitudinal and transverse sealing system - Automatic cutting and forming of packaging - Control of aseptic conditions during the process - Automatic transport and discharge of packaging - Tetra Pak electronic control panel - Operating parameter monitoring system - Upper platform for access and maintenance - Industrial construction with stainless steel components - Integrable into complete aseptic packaging lines OPERATING PROCESS The multilayer packaging material is fed into the TETRA PAK A3 FLEX from a reel and passes through the sterilization system before being formed. Subsequently, the material is transformed into a continuous tube through longitudinal sealing. The product, previously treated using a compatible UHT system, is introduced inside under aseptic conditions. The machine performs the transverse sealing, cutting, and forming of the individual packages, producing hermetically sealed bricks ready for the next production stages. The finished packages can be transferred to inspection, coding, capping, grouping, case packing, and palletizing systems. APPLICATIONS Particularly suitable for dairy industries, juice, nectar, plant-based beverage, and other long-life liquid product manufacturers. Depending on the installed configuration, it can be used for: - UHT milk - Flavored milk - Dairy smoothies - Fruit juices - Nectars - Plant-based beverages (soy, oat, or rice) - Nutritional beverages - Other liquid beverages compatible with aseptic packaging The TETRA PAK A3 FLEX 1000 B constitutes an industrial solution for automating the aseptic packaging of beverages, combining packaging formation, filling, and sealing in a single machine. The exact formats, production capacity, and compatibility with different products will depend on the installed configuration and tooling. Machine available for inspection. Additional technical information, production capacity, formats, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Technical details: revolution per minute: Motor: 1430 U/min voltage: 380 V / Hz weight: 125 / Gerät kg dimensions: L:680 x B:850 x H:750 mm 2 pieces RADAX high pressure tube fan for dusty air mixture 3-Ph; IE3 06717 external control motor ADDA drive technology, IP55 Ø of the ventlator 650mm 2x flange with 16 holes -hole circle Ø 700mm Kdjdpfx Ahju Nww Djbeu *

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 12,973 kg, empty load weight: 2,027 kg, loading space volume: 16.6 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 1,200 mm, Price upon request. The price applies ex works, 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. *Leasing/hire purchase possible!* 1 unit in stock, RAL 7043 4 units available in the short term, other RAL colors on request Other designs and sizes available from stock in Paderborn. You can view our stock levels on our website. Kdsdpfx Aez E Ncyohbou Roll-off container according to DIN Technical description: * Internal dimensions: 6000 x 2300 x 1200 mm * Usable volume: 16.6 cbm * Unladen weight: 2027 kg * Floor 5 mm S 235 * Side walls 3 mm S 235 * Without internal supports * All sheets and profiles continuously welded * Double-wing door with safety latch * Container tested and approved according to DGUV Rule 114-010 * Floor-side wall connection 45° * Hook diameter 50 mm, S 355 * Hook height 1570 mm * Top frame square tube 100x100x5 mm * Mesh hook * All moving parts can be greased * Steel drain rollers 159 x 6.3 length 300 mm * Inside and outside zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) * Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustration purposes only! The price applies per unit plus 19% VAT. For further questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 18 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 13,180 kg, empty load weight: 1,820 kg, loading space volume: 9.5 m³, loading space width: 2,300 mm, loading space length: 5,500 mm, loading space height: 750 mm, Price upon request. The price applies ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. Leasing/hire purchase possible. 5 units in stock, RAL 7043 6 units available in the short term, other RAL colors available upon request. Other versions and sizes available from stock in Paderborn. You can view our stock on our website. Technical description: • Internal dimensions: 5500 x 2300 x 750 mm • Usable volume: 9.5 cbm • Unladen weight: 1820 kg • Base 5 mm S235 • Side walls 3 mm S235 • End wall angled upwards • All sheets and profiles continuously welded • Double-wing door with safety lock • Standard ladder according to UVV, bolted on, galvanized • Container tested and approved according to DGUV Rule 114-010 • Base-side wall connection 90° • Hook diameter 50 mm, S355 • Hook height 1570 mm • Top frame, round tube Ø 89 mm • Mesh hooks Kjdpfxez E Na Ee Ahbodu • All moving parts can be lubricated • Steel drain rollers 159×6.3, length 300 mm • Inside and outside zinc phosphate primer, outside coated with synthetic resin paint (80-100 μ) • Permissible total weight 15,000 kg Subject to errors and prior sale. Photos are for illustrative purposes only! If you have any questions, please send us a message or call us.

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side walls swinging and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed into the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the sides, continuously height-adjustable draw tube, removable rear stakes, gearbox support winch with load and high-speed mode at front, integrated receiver compartment for two aluminum loading ramps in chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- Subject to misprints, errors and changes, sample images --, More data at: !, More details: ! Kjdpfx Ae Aazhqohbodu

Condition: used, Year of construction: 1993, Technical details: tube diameter: 80 mm Kdsdpfsu Ibyyjx Ahbsu tube diameter min.: 6 mm control for program: Gelma MM-1 tube pipe draw up length: 1800 mm weight of the machine ca.: 0,232 t dimension machine xH: 1,9 x 0,7 x 1,3 m Semi-automatic PIPE BENDING MACHINE Operating modes are manual but also semi-automatic Application: for multiple bending of pipes The swivel unit with bending preselection for 3 different bending angles in single and automatic mode. The machine is currently equipped with a stop bar for tube size Ø 10mm for 6 angle settings. The bending machine is movable/adjustable. Equipment/accessories: 6 cam rods/stop rods 6 control disks Bending tool for Ø 12mm *

Condition: used, Year of construction: 2004, Technical details: tube diameter: 20 mm bending radius max.: 100 mm control for program: S7-300 tube pipe draw up length: 2270 mm air pressure - required: 7 bar total power requirement: 15 kW Bending speed: 540 °/sec control voltage: 24 V / DC V connection voltage: 400V / 50Hz / 3 Ph V dimensions L x W x H: Biegeaggregat: 1,8 x 1,4 x 1,6 m dimensions L x W x H: Zuführung: 1,2 x 1,5 x 1,55 m dimension machine xH: 3,0 x 1,0 x 1,2 m Mandrel tube bending machine Bending direction RIGHT Operation via SIMANTIC Panel PC control unit Pneumatics: Pressure 7 bar; flow rate 200 l/min. Hydraulics: Pressure 150 bar; flow rate 6.8 l/min. Equipment/Accessories: -oil drip tray 3.1 x 0.96 x 0.02m -Spare parts and accessories Kdodpfx Ahsu Ibzkobeu *