Used Brass Tubes for sale (2,221)

Condition: good (used), Year of construction: 2002, functionality: fully functional, input frequency: 50 Hz, For sale in excellent condition HOVAL HG-E 300-1650kw industrial gas burner with control, DUNGS assembly Iedpfxsu A Ills Afiebc manufacturer HOVAL HG-E 140 year of manufacture: 2002 heating output min.-max. 300–1650 kw gas type: natural gas Gas flow min.–max. [Stm3/h] 32–174 Gas pressure 90-220 Mbar DUNGS MB-DLE 420 B01 S22 Gas multiblock gas regulator Tightness checker Dungs VPS-504 S02 Dungs LGW 50A pressure switch Electrical connection 400v 3-phase 50Hz Total energy consumption 2.7kw Fan motor: 2.2kw Protection IP40 Flame tube diameter: 230mm flame tube length: 260mm Gas connection: Rp 2 - DN65 - DN80 Two-stage / two-stage sliding / modulated regulation machine length: 1100mm width: 700mm height: 500mm weight 110 kg

Condition: new, Year of construction: 2025, A compact device using the FIBER technology, designed for welding many types of metals with precision far exceeding traditional welding methods. Advanced technological solutions used in the offered welding machine allow to perform high-quality and repeatable welding welds of thin-walled materials and parts without the risk of deformation. Advantages of a laser welding machine Easy to use - thanks to the applied solutions and well-thought-out structure, the operator can start working after a short training Low indirect radiation, when working, it is enough to wear protective glasses to filter strong light, Welding much faster than with traditional methods, productivity can be increased by up to 3 to 10 times Concentrated beam: slight structure change due to the small heat-affected area, The repeatability of the welds, the welding seam is nice, the welds are high strength. Very thin materials such as 0.5mm stainless steel can be welded. Option of welding with or without wire. Technical parameters Maximum power 2000W Laser wavelength 1080nm Depth of penetration (stainless steel 1 m/min) 4.57mm Depth of penetration (black steel 1 m/min) 3.59mm Depth of penetration (aluminum 1 m/min) 4.0mm Depth of penetration (brass 1 m/min) 4.0mm Welding speed 0-120mm/s Automatic Wire Feeder Ø 0.8 - 1.6mm Maximum power consumption ≤6.0kW Cooling system aqua Working voltage 400V Shielding gas consumption 20L/min Dimensions 600 x 1100 x 1100mm Weight approx. 185 kg LATEST GENERATION WELDING HEAD WOBBLE head; Automatic wire feeder included; Adjustable spot size 0-5mm; The powerful welding head allows many types of beam guidance: -, ○, ◎, ⊙, 8, ∞; Integrated connections for shielding gases and cooling system, Interchangeable nozzles allow for welding at different angles, 10 m of optical fiber that connects the head to the source, Adjustment of welding parameters directly in the head without having to go to the control panel; Full ergonomics - thanks to the light and flexible design, the head can perform welds even in hard-to-reach places; Easy to service - quick and easy replacement of the protective lens. Automatic wire feeder included The wire feeding system is synchronized with the welding machine software. The task of the feeder is to feed the filling, thanks to which the operator can focus 100% on the work of the head. Set includes Ibodpjizr Rljfx Afisc laser welding machine with built-in cooling system welding gun with adjustable focus and a set of accessories Fiber laser source automatic wire feeder set of cables starter kit of nozzles and protective glasses THICKNESS OF WELDED MATERIALS Material WELDER POWER 1000W 1500W 2000W Stainless steel 0.5-3.0mm 0.5-4.0mm 0.5-5.0mm Black steel 0.5-2.5mm 0.5-3.5mm 0.5-4.5mm Galvanized steel 0.5-2.5mm 0.5-3.0mm 0.5-4.0mm Aluminum 0.5-1.2mm 0.5-1.8mm 0.5-4.0mm Brass 0.5-1.2mm 0.5-1.8mm 0.5-2.5mm

Condition: new, operating pressure: 210 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 161 kg, warranty duration: 24 months, TECHNICAL DATA OF THE KARCHER HDS 10/21-4 M CLASSIC WASHER: Model: HDS 10/21-4 M CLASSIC Manufacturer: KARCHER Ibjdpfxov Tnbko Afioc Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 500 - 1000 Working pressure (bar/MPa): 30 - 210 Maximum pressure (bar/MPa): 230 Water heating range (°C): >98 Connection power (kW): 7.5 Power cable (m): 5 Weight (kg): 161 Dimensions (length x width x height) (mm): 1075 x 722 x 892 EQUIPMENT OF THE KARCHER HDS 10/21-4 M CLASSIC WASHER: Pressure gun: Karcher Professional !EasyForce Classic High-pressure hose: Karcher Professional - 10M, DN8, 315BAR - !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Karcher Professional POWER pressure nozzle !EasyLock RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and work comfort 4-pole motor, water-cooled Two detergent tanks separated from each other Additional handles allow the device to be transported with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. The standard EASY!Force Advance high-pressure gun with a rotating lance, 10m high-pressure hose and power nozzle EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has the EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is completely new and factory-packed

Condition: used, Year of construction: 2011, Manufacturer : TGM Model: E250 MATIC Year : 2011 Type : Plastic tube filling and closing machine Closure : hot air device (HA) Max capacity : 60 units / min Transport chain : 10 buckets Empty tubes feeding : automatic Tube centring Sold with 3 simple hoppers and 1 jacketed hopper Verification check: no tube – no filling Outfeed conveyor belt Formats available.   General information Ibedpfx Aovlzxmjfijc Tube height: 50 – 240 mm Diameter: Ø 10 mm – 50 mm

Condition: used, Year of construction: 1988, Technical details: intake capacity: 1200 m³/h aspiration hole diameter: 230 mm total power requirement: 1,1 kW weight of the machine ca.: 110 kg dimensions of the machine ca.: 1,2x0,7x2,0 m Ibodpfx Afju Nwiteisc mobile compact filtering device with suction arm length = 2800mm ( suction diameter 230mm) (tube dia160mm). 3 chamber fitering system application: smoke-and dust, such as welding smoke and skome filtration test run has been proceeded succesfully *

Condition: used, The PRS 76 is a top-tier Tube End Finishing Machine designed specifically for efficient tube and profile processing. This advanced machine features a powerful 3 kW motor that allows it to grind various materials effortlessly. With its innovative rotating design, the PRS 76 enables you to grind at any angle between 30° and 90°, accommodating diameters from Ø 20 mm to Ø 76 mm. It comes equipped with two K36 grinding belts, measuring 100 x 2000 mm, ensuring you have everything needed for optimal performance. Ideal for both tubes and profiles, the PRS 76 stands out for its ease of use and versatility. Enhance your workshop's capabilities with this robust machine. You can request a quote today to learn more about the PRS 76 and discover how it fits into your tube end finishing requirements. Ibodpfsuxdb Ujx Afisc

Year of construction: 2021, condition: like new (used), functionality: fully functional, High pressure axial tube fan 1000mm 7.5 kW Nuaire SC1000LC4KGX-0JM6 several pieces for sale Air volume 32000m³/h at 420 Pa delivery head Several pieces for sale, high pressure duct fans, excellent for various cooling and ventilation applications. manufacturer: NUAIRE Type: SC1000LC4KGX-0JM6 year of manufacture: 2021. completely NEW! several pcs Technical data: glass fiber reinforced polyamide blades Adjustable blade angle Ibedpfjwr Ul Sjx Afioc diameter Ø 1000 mm Anodized aluminum motor motor power 7.5 kW / 400/50Hz/ 1460 rpm, 17.76 amp -50/+60ºC (Stop/Start) minimum operating temperature in standard version Anchored housing Plastic blades Dimensions external size 1106 mm / depth 570 mm including motor weight: 136kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), Code: 0456 Brand: MEBER - ITALY Model: BEST 800 - CE Standard Industrial band saw with feeder for wood, semi-finished products, window frames , laminated timber, beams, boards, sawmills, carpentry and various - CE Standard Features: Sturdy construction Ergonomic position of the control panel board Integral blade guard Scrapers with brass blade for good cleaning of the flywheels Flywheel diameter mm 800 Table dimensions mm 1300 x 800 Cutting capacity: height x width mm 380 x 750 Blade width mm 80 Flywheel revolutions min 700 Blade length mm 5090 Motor power Hp 20 Feeder R1 : Fitted with a toothed drive roller and a support fence with idle rollers which can be positioned manually - Roller position is adjustable - Feed speed variator Roller height mm 235 Ijdpfx Afewn H Iwsiobc Roller diameter mm 215 Max roller-blade distance mm 290 Max distance fence-blade mm 200 Fence dimensions: mm 490 x 290 x 260 Machine dimensions with mounted resaw mm 1200 x 1900 x 2500 h Total weight kg 1580

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 5,000 mm, total width: 3,500 mm, total height: 2,950 mm, inner dimension height: 2,650 mm, inner dimension length: 4,900 mm, inner dimension width: 3,400 mm, Equipment: cabin, Automotive Spray Booth The automotive spray booth is a fundamental device in paint repair technology. It enables painting operations to be carried out in safe and comfortable conditions while minimizing the negative impact on the surrounding environment and the workspace. Specifications: - External dimensions: 5000 (+ air handling unit 1350 × 2900 mm) × 3500 × 2950 mm - Entrance door: 3000 × 2600 mm (three-wing design) - Service door: 700 × 2000 mm - Structure: made of steel sheets - Heat exchanger: standard steel - Panels: steel panels with mineral wool insulation in the walls Cabin Wall Structure: - Thickness: 50 mm - Insulation: EPS polystyrene - Color: white Cabin Base: - Cabin mounted directly on floor/concrete surface Double Ceiling: - External ceiling paneling - Full-surface plenum chamber for air supply Air Exchange System: - Supply system: - Jet turbine 4 kW – 2 units - Airflow capacity: 26,000 m³/h - Airflow system: - Jet turbine 5.5 kW – 1 unit - Airflow capacity: 18,000 m³/h Ibsdpfsxnpczjx Afiec Lighting: - 8 side-mounted lamps - Ceiling lighting: 24 LED tubes Air Heating System: - Single-stage oil burner Riello model 40 G20 - Burner control: manual - Heating time: 8–15 minutes Filtration System: - Double-layer filtration structure - High-capacity air purification system with filtration efficiency up to 99%

Condition: used, GVW: 1.590 kg Manesty – ACCELA COTA Coating machine Model 150 (45 inch) This high quality coating equipment, designed to cover a wide range of production batches from medium scale to large scale, has an unbeatable combination of a very efficient coating process coupled with a high rate of return on investment. Innovative science based developments in the four key areas of; tablet mixing, spraying, drying efficiency and control system technology, guarantee that the XLTMCota provides a very effective solution to obtaining a highly controlled process, ensuring the delivery of high quality end product. Interchangeable baffles to suit all processes A range of three baffles to suit different applications are offered. Oystar Manesty identified the product movement in the coating pan to be a key attribute in reaching optimal coating efficiency. Baffles can be easily removed and interchanged. Ibodjvlyxrepfx Afiec Efficient CIP system to guarantee fast return to production In conjunction with our m-tecTM control system, Oystar Manesty provides a fully validatable Clean in Place (CIP) option. From the initial rinse through to compressed air cleaning of solution tubes, the XLTMCota Clean in Place (CIP) was designed to promote fast return to production by eliminating the need for manual cleaning. Simple and fast loading and unloading facility Tablets can be loaded with the front door closed or open using simple load chutes designed to suit different types of containers. Tablets are discharged by reversing the direction of the drum. This method has been proven to be extremely fast and gentle at the same for safe handling of the finished product. Weight : 1590 kg CoaterDimensions : H 2065 x W 1665 x D1475 Spray Guns : 3Working Volume : 170 LCompressed Air Consumption (5bar from Coater) : 7.9 Air Volume Range (m3/hr) : 1500 – 2500 Main HeaterTemperature Range (°C) : 10 – 85 Main Heater Steam Consumption ( kg/hr ) : 117 Sold with : Donaldson Torit – Dust collector DCE DF02 12R

Condition: new, functionality: fully functional, Year of construction: 2025, container length: 19.7 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 12,920 kg, empty load weight: 2,080 kg, loading space volume: 13.8 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 1,000 mm, Price on request. The price applies ex stock 33106 Paderborn! Quantity discount available for purchase of multiple containers. Ibjdpfx Aow D Dnysfioc Leasing/financing options available. 1 unit available directly from stock, RAL 7043 2 units available at short notice, other RAL colors selectable Other versions and sizes available from stock in Paderborn. You are welcome to check our stock list on our website. Roll-off container according to DIN 30722-1 Technical description: • Internal dimensions: 6000 x 2300 x 1000 mm (L x W x H) • Usable volume: 13.8 m³ • Dead weight: 2080 kg • Floor: 5 mm S235 • Side walls: 3 mm S235 • All sheets and profiles fully welded • Double-wing doors with safety lock • Additional longitudinal reinforcements (belly band) for increased stability • Container tested and approved according to DGUV Rule 114-010 • Standard ladder, bolted, galvanized • Rounded floor-to-sidewall connection • Hook diameter: 50 mm, S355 • Hook height: 1570 mm • Top frame: round tube 89 × 6.3 mm • Mesh hooks • All moving parts greaseable • Steel roller: 159 x 6.3 mm, length 300 mm • Zinc phosphate primer inside and out, exterior finish with synthetic resin paint (80-100 μ) • Permissible total weight: 15,000 kg Subject to prior sale and errors excepted. Photos for illustration purposes only! If you have any questions, feel free to send us a message or call us.

Condition: used, The RGM 3, a top-tier Tube End Finishing Machine from KNUTH, is designed for precision and efficiency in tube processing. Its rigid construction and small footprint make it an ideal choice for any workshop looking to optimize space without sacrificing performance. The machine features a jaw chuck at the front and a clamping chuck at the rear, allowing for versatile operations. Additionally, it comes equipped with a tube cutter and an inside deburrer, ensuring clean and accurate finishes on all types of tubing. With the inclusion of a mobile base, the RGM 3 offers easy maneuverability, enhancing its usability. Whether you need to perform intricate tube work or handle larger projects, this highly robust machine is built for the task. Don't miss out on the opportunity to enhance your tube and profile processing capabilities; order online today to bring the RGM 3 to your workshop. Ijdouxc Rhopfx Afiobc

Condition: new, Year of construction: 2020, functionality: fully functional, empty load weight: 135 kg, tank capacity: 500 l, pressure (max.): 6 bar, NEW! Packed!!! Dimplex standing buffer tank PSW 500, Universal buffer tank for sale in several pieces Nominal capacity 500 l, PU insulation (2.4 kWh/24h = 100 W), with three 1.5" sleeves for immersion heaters (up to CTHK 635) with two 2.5" heating water connections with DN 180 flange for installing RWT 500 finned tube heat exchanger with three adjustable feet Inclination angle 2.08 m Operating pressure 6 bar Height: 1950 mm Iedpfx Asw Hcdljfijbc Inclination size: 2045 mm Diameter: 700 mm Weight 135 kg Visszajelzés küldése Oldalsó panelek Előzmények Mentve

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, Characteristics of the crosscut saw - Single 500 mm blade on a robotic arm that can be moved in height, length and depth and tilted. - Everything is managed via a Human / Machine touch interface that ensures sorting and optimization of cuts. - The whole system is entirely confined in a box to reduce dust and noise to a minimum. - Motorized loading chain for wood up to 6.50 meters - Loading infeed table with digitized clamp - Automatic piece feeding, automatic feed, trim cut - Long cuts thanks to synchronized movement of the blade pusher - Second digitized clamp for the exit of the wood - Ink jet marking at the exit - Output table with automatic ejection on support arms - Protection grids - Waste recovery by wide belt under the blade - Waste lifting device for dumping - Control and programming panel on touch screen PC and color - Import of files in .btl format - Independent programming console for the inkjet head - Complete casing and CE standards - Minimum wood section : 30 x 50 mm - Maximum section of the wood : 80 x 300 mm or 80 x 260 mm (depending on the speed of the stroke) - Wood length : between 2000 mm and 6500 mm Modes of operation : - Automatic operating mode: from a file with information on the site, the machine automatically optimizes the cuts and indicates to the operator, the order of introduction of the wood for the cutting. The operator unloads the wood on the input table in the given order, the machine cuts it and the operator recovers the cut bars on the output table. - Manual operation mode: The operator keeps full control of the machine movements, and adjusts all axes individually, mode used for maintenance purposes. Power supply : - Three-phase in 400 V / 8.5 kW (11 hp) / 300 mA differential Ibsdpek E Hvuefx Afijc Pneumatic supply : - 6 to 8 bars of dry air pressure, flow rate of 10 m³ per hour with instantaneous peaks connected by minimum D12 rilsan tube Dust suction : - 1 mouth of 160 mm of diameter at the right rear - 1 mouth of 140 mm diameter at the left rear - 1 x 80 mm spigot equipped with an 8 meter hose is recommended for cleaning Wood dimensions: - Max thickness: 80 mm - Maximum height: 260 mm to 300 mm (depending on equipment) - Minimum cutting length: 100 mm - Maximum cutting length: 6500 mm Machine very clean and in perfect working condition

Condition: good (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 564 kW (766.83 HP), type of cooling: air, overall weight: 6,930 kg, total width: 2,300 mm, total length: 5,800 mm, total height: 2,450 mm, warranty duration: 6 months, heating capacity: 586 kW (796.74 HP), Aircooled chiller/Heat pump CLIMAVENETA FOCS N LN CA 2622 564 kW / 586 kW Cooling capacity: 564 kW / 160.37 tons (12/7 — 35°C) Heating capacity: 586 kW / 166.63 tons (40/45 —7°C) Year of manufacture: 2015 Ibjdpfx Ajxnlhmofioc Options: Heat pump. Economizer. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 1 pcs. Bitzer CSH8583-125-40D (screw) + 1 pcs. Bitzer CSH8583-125CVY-40D (screw) Type of refrigerant: R134A Number of fans: 12 pcs. Dimensions: 5.8x2.3x2.45 m Weight: 6930 kg Working hours: 16551/5862 h. Condition: Good

Year of construction: 2017, condition: used, New: Yes Applicable material: Food Empty weight: 250 kg Volume: 304 l Manufacturer : Confitrac sprl Model: CDS-161205 Year : 2017 Type: Deodoriser Ibodpew Dhuwsfx Afisc Condition: new, never used. Document : CDS-P& Installation consisting of : – A horizontal cylindrical shallow bed deodoriser divided into two horizontal compartments, supported by two supports and offering the possibility to treat either 250 kg in one compartment or 500 kg in two compartments. – A horizontal buffer tank equipped with a product inlet/outlet, vacuum outlet and sight glass. Volume: +/- 460 litres. – 2 shell and tube heat exchangers – 1 electric heater – 2 electric heating resistances – Other equipment: control and dosing valves, flow meter, steam drying ramp, etc. – Electrical cabinet Materials: all parts in contact with the product are made of stainless steel 304L and 316L. Insulation: 100 mm rock wool. Documentation and drawings available. Capacity: deodorising temperature 180°C (200°C max.) Batch: 250 Kg or 500 Kg (2 x 250) Process: heating of the product under vacuum + steam injection.

Condition: good (used), Year of construction: 1994, control type: CNC control, controller manufacturer: Siemens, controller model: 840 D, pipe diameter (max.): 168 mm, bending angle (max.): 190 °, bending radius (max.): 700 mm, bending radius (min.): 80 mm, overall weight: 32,000 kg, total width: 2,700 mm, total height: 2,450 mm, Tube diameter: 168.3 x 11 mm Tube insertion length: 6000 mm Max. bending radius: 700 mm Control system: Siemens 840 D Min. bending radius: 80 mm Max. bending angle +/-: 190° Dimensions (L/W/H): 11.9 x 2.7 x 2.45 m Machine weight approx.: 33 t - CNC control: CNC MMI Multicontrol 2000 - Control system: NCU - PLC: Siemens Simatic S7 - Electrical connection: 400V / 50 Hz / 85 A The machine is fully automatic and equipped with a tool changer. The following tools are available: Tube Ø 48.3 mm; radius 105 mm Tube Ø 60.3 mm; radius 120 mm Tube Ø 63.5 mm; radius 150 mm Tube Ø 76.1 mm; radius 190 mm Tube Ø 88.9 mm; radius 222 mm Tube Ø 114.3 mm; radius 285 mm Tube Ø 139.7 mm; radius 350 mm Ibsdpsxnlhajfx Afiec Tube Ø 141.3 mm; radius 700 mm Tube Ø 168.3 mm; radius 420 mm There were a few mandrels with direct engravings indicating their specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following mandrel outer diameters were measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package has an estimated value of approx. €150,000.

Condition: used, The RGM 2 is a state-of-the-art Tube End Finishing Machine designed by KNUTH, renowned for its robust and precise engineering. With a rigid design and a small footprint, this machine is perfectly suited for shops that require efficiency without sacrificing performance. The RGM 2 features an impact chuck at the front and a clamping chuck at the rear, ensuring secure handling of various tube sizes. Additionally, it includes a tube cutter and an inside tube deburrer, which provide a complete solution for finishing operations. For mobility, the machine is equipped with a mobile base. When looking for a reliable Tube End Finishing Machine, the RGM 2 stands out with its advanced features. Don't hesitate to request a quote today to enhance your tube processing capabilities with this exceptional product from the renowned KNUTH brand. Ibodpfxep Atgbs Afisc

Condition: excellent (used), Manometer, test manometer, Bourdon tube pressure gauge, pressure-temperature measurement technology -Manufacturer: Wika, capsule pressure gauge unused OVP Type: 612.20.100 0 mbar...60 mbar -Art. No.: 9071652 -Screw connection: G1/2 Ibjdpfx Aoggy Tfsfijc -Number: 2x pressure gauges available -Price: per piece -Dimensions box: 140/110/H55 mm -Weight: 0.6 kg/piece

Condition: good (used), Pentavac Penta2100 VFFS bagger Serial: 1108 Vertical form fill and seal machine, 80mm diameter forming tube, 310mm jaw width, with date coder, ESA touch screen controls, mobile, 3Ph Ibodpfxev Dl Tls Afisc

Condition: good (used), Year of construction: 2020, functionality: fully functional, cooling capacity: 890 kW (1,210.06 HP), type of cooling: air, overall weight: 7,321 kg, total width: 2,260 mm, total length: 7,200 mm, total height: 2,300 mm, warranty duration: 6 months, Aircooled chiller CARRIER 30XB 0900 0041 890 kW Cooling capacity: 890 kW / 253.1 tons (12/7 — 35°C) Year of manufacture: 2020 Ibsdpfx Afexnlffsioc Options: Recuperation. Economizer. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 2 pcs. Carlyle 06TUA483SW1E (screw) Type of refrigerant: R134а Number of fans: 14 pcs. (Frequency inverter) Dimensions: 7.2x2.26x2.3 m Weight: 7321 kg Working hours: 6088/6061 h. Condition: Good

Condition: used, Year of construction: 2003, Manufacturer: Norden Model: NM 250 HA Year: 2003 Type: Hot air plastic tube filler / sealer Max capacity : 25 units / min Transport chain : 14 buckets Empty tube feeding : manual Tube printing centering 20 L hopper HA hot air device Ribbed or smooth sealing 1 side coding: 6 characters Verification check: no tube – no filling Available formats. Cutting recovery: CFM R154V hoover ThermoChill I Recirculating Coolers General information Filling volumes: 1ml – 300ml. Diameter: 10 mm – 50 mm Ijdpfovly Hpsx Afisbc

Condition: good (used), Year of construction: 2001, working width: 4,500 mm, Pipe insertion length max 4500 mm - electronic 1-axis control Ibedpfxoxnlais Afiec - 2-axis measuring system - electronic display of the twist - electronic display of the longitudinal position - twist angle unit with stops - early mandrel retraction - automatic mandrel lubrication with micro-oil dosing Accessories: - incl. bending tool 21.3 / 26.9 / 33.7 / 42.4 / 48.3 / 60.3 / 76.1 mm x 2 D - incl. various mandrels

Condition: used, Year of construction: 1995, Manufacturer: Kalix Ijdovlzp Sspfx Afiobc Model: KPS Year : 1995 Type : Cartoner Capacity : 50 cartons / minute Formats : A size : 20 x 100 mm B size : 20 x 80 mm C size : 45 x 200 mm Carton feeder: large storage capacity unit Leaflet insertion Product feeder: tube, bottle, etc. dispenser Variable speed for feed and main movements Marking control: provide marking system Video in operation: ?si=4F52yePeUNSPucan

Condition: good (used), Year of construction: 2000, pipe length (max.): 4,500 mm, bending radius (max.): 200 mm, Tube diameter: 76.1 mm Tube insertion length: 4500 mm Max. bending radius: 200 mm Bending direction: right Ibjdpoxnk Tbofx Afioc Machine weight approx.: 1.7 t Additional information Control: electronic 1-axis control