Used Bodo Gerhard Celle for sale (1,239)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left Iiodpfx Apszuygqjceg • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: used, Year of construction: 2008, operating hours: 37,000 h, For sale is an ARBURG ALLROUNDER 630 S 2500-800 ECO injection molding machine from 2008 with extensive automation and peripherals. Manufacturer: ARBURG Type: ALLROUNDER 630 S 2500-800 ECO Year of manufacture: 10/2008 Clamping force: 2,500 kN / 250 t Injection unit: 800 Control system: ARBURG SELOGICA The machine is equipped with an original ARBURG Multilift V select with a load capacity of 15 kg. The system also includes a complete safety enclosure, conveyor technology, and other peripheral devices. Ijdpfjzw D Hmox Apcsig The machine is connected to the power grid and is currently in operation in a production facility. An inspection can be arranged by appointment. Technical specifications / Design: ARBURG ALLROUNDER 630 S 2500-800 ECO Year of manufacture 10/2008 Clamping force 2,500 kN / 250 t Injection unit size 800 Spindle diameter: 55mm Control system ARBURG SELOGICA Operating voltage 400 V / 3~ / 50 Hz Control voltage 230 V / 50 Hz Total connected load 81 kW Total rated current 145 A Automation: ARBURG Multilift V select Year of manufacture 10/2008 Load capacity 15 kg Control via SELOGICA pneumatic design X-/Y-/Z-axes complete safety enclosure part removal via conveyor belt Additional equipment / Peripherals: Piovan material conveying unit material hopper conveyor belt additional conveyor belt on the machine side several temperature control / tool circuits ARBURG temperature control unit extensive media connections complete automation cell. An inspection of the machine is possible after prior appointment. Location: Greater Thuringia area _____ In addition, the following machines, not listed here, are also available: DEMAG Ergotech 50-270 – Year 2002 DEMAG ViVa 100-400 – Year 2000 DEMAG Extra 200-840 – Year 2007 DEMAG Ergotech 80-200 – Year 1995 DEMAG Ergotech 80-200 – Year 2001 ENGEL Victory 80/40 – Year 2006 DEMAG Ergotech 35/320-120 concept – Year 2002 _____ Subject to prior sale and errors in the technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply, and the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are appropriate for their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Year of construction: 2026, operating hours: 1 h, condition: new, machine/vehicle number: H10TM, Universal testing machine H10TM Force: 10 kN Crosshead travel: 700 mm Installation space: 400 mm Overall height: 1230 mm Weight: approx. 84 kg Stroke resolution: 0.01 mm Testing speed: 1-500 mm/min Return speed: 700 mm/min Force sensor: 10 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for a “quick test” even without a PC. For tests that require data storage and recording of the curve profile, we offer you the option to control and evaluate the test using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 Load cells: 5N-10N-20N-50N-100N-200N-500N-1kN-2kN-3kN-5kN-10kN - Grips: Compression platens, bending fixtures, shear fixtures, wedge grips, scissor grips, screw grips, pneumatic grips, and hydraulic grips. Isdpfxjzuma Ro Apcoig

Condition: excellent (used), Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 Material Testing Machine, 20 kN Manufacturer: Zwick / Roell Series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Machine Type: Servo-electric Material Testing Machine / Universal Testing Machine Max. Testing Force: 20 kN For sale is a used Zwick / Roell Z020 Allround-Line material testing machine with testControl II control system, industrial PC, and installed testXpert V3.5 software. The machine is suitable for tensile and compression tests on metals, plastics, elastomers, composite materials, and numerous other materials, and is used in testing laboratories, quality assurance, research and development, and training. Technical Data: Manufacturer: Zwick / Roell Series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Max. Testing Force: 20 kN Testing Direction: Tensile and Compression Iijdpfx Ajzra Rqspceg Testing Space Height: 1,000 mm Crosshead Speed: 0.0005–1,000 mm/min Power Supply: 230 V / 50–60 Hz Power Consumption: 8 A Control System: testControl II Software: testXpert V3.5 Load Cell: Zwick / Roell Xforce P 20 kN Zwick / Roell Xforce P 2.5 kN Dimensions: Machine Dimensions (W × D × H): approx. 1,244 × 690 × 1,324 mm Machine Weight: approx. 212 kg Equipment: testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Testing fixture Connection and cabling Accessories as shown in the pictures Shipping Data: Dimensions (W × D × H): approx. 1,244 × 690 × 1,324 mm Shipping Weight: approx. 212 kg Condition: Used Optical condition as shown in the pictures. Functional scope as shown in the pictures. Nameplates present. Scope of Supply: Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Testing fixture Connection and cabling Further accessories as shown in the pictures The table, monitor, keyboard, and mouse shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Year of construction: 2014, condition: good (used), High-performance fan, Zenner, type VTZ 710/63/1 Special, year of manufacture 2014, consisting of a control cabinet, frequency converter, and cell gate. Technical data Manufacturer: Zenner Ventilatoren Type: VTZ 710/63/1 Special Year of manufacture: 2014 Volume: 4.72 m³/s Maximum temperature: 80°C Density: 1.2 kg/m³ Total pressure: 5,000 Pa Speed: 2900 1/min Motor: 55 kW Voltage: 400/690 V / 50 Hz Weight: approx. 800 kg The fan is designed for the transport of paper/cardboard, during which the material is also shredded. The machine is in good condition. It has been inspected and tested by us in 28816 Stuhr. You can find the video on our website or our YouTube channel. Inspections, including with the machine running, are possible at any time by arrangement. Video calls are possible upon request. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, prior sale, and may be revoked at any time. Inspections are possible by arrangement. Ijdszt Imcopfx Apcjig The sale takes place from our location, without any warranty.

Year of construction: 2012, condition: good (used), Separator sluice / cell wheel sluice Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge sections. Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Volume flow rate max. 28000 m³/h Inlet diameter max.: 450 mm Speed: 22 rpm Rotor width: 1500 mm Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (L x W x H) Weight: approx. 3000 kg Isdozt Ipkepfx Apcsig Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. The video can be found at the top of our website or on our YouTube channel. Inspections, including under power, are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: used, functionality: fully functional, machine/vehicle number: 35543, mileage: 31,090 km, power: 260 kW (353.50 HP), first registration: 08/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,200 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, Equipment: ABS, air conditioning, airbag, cruise control, power assisted steering, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Lrsbn Ed Iezktyvs E Ior Iedpfx Aezwfd Topcsig Further comparable vehicles are available upon request. Engine OM 936, air suspension, axle load measuring device, differential lock, parking brake, electronic braking system, disc brakes front and rear, ABS, ASR, ESP, electrical waste disposal system, lane keeping assist, turning assist, Active Brake Assist 3, blind spot camera system, adaptive cruise control, cruise control, rain sensor, light sensor, lockable fuel tank, high cab, sliding door on the right, driver's seat comfort suspension seat + 2 static passenger seats, tinted windshield with band filter, electric sun visor, electric windows, electric heated mirrors, lift roof, immobilizer with transponder, CD radio with Bluetooth, digital tachograph, voltage converter 24/12V, additional 24 V socket, circuit breakers, pollen filter, air conditioning, pre-installation for all-round lights, pre-installation for toll collection. High cab, sliding door on the right, driver's seat comfort suspension seat + 2 static passenger seats, tinted windshield with band filter, electric sun visor, electric windows, electric heated mirrors, lift roof, immobilizer with transponder, CD radio with Bluetooth, digital tachograph, voltage converter 24/12V, additional 24 V socket, circuit breakers, pollen filter, air conditioning, pre-installation for all-round lights, pre-installation for toll collection, speed limiter, main tank 200 l. Superstructure suitable for cleaning waste containers MGB 80-1,300 liters; containers: made of stainless steel 1.4301, thickness 3 mm, box-shaped, 3-cell, 3x manholes DN500 on the container top for each chamber; container volume: approx. 8000 liters of fresh water, approx. 8000 liters of dirty water and approx. 1200 liters for solids; cleaning compartment with corrosion protection; separate hot water tank approx. 250 liters mounted between the cab and the tank container and is filled via a feed pump from the fresh water tank, the automatically controlled heating system (Eberspächer auxiliary heater 25 kW) heats the washing water to approx. 45-50°; high-pressure pump: Uraca (approx. 120 l/min at 80-100 bar); pressure connection with shut-off valve and 4 m HD hose, spray gun with holder; hydraulically driven submersible pump for filling the service water chamber; control box mounted at the rear of the superstructure; tool box on the side of the chassis made of stainless steel; 2x work lights at the rear. Functional description: For cleaning, the dirty container is swung into the cleaning compartment at the rear of the vehicle. The stainless steel high-pressure washing heads move into the container and are supplied with pressurized water. The container is cleaned fully automatically by two robotic arms with washing nozzles that rotate around 2 axes, thus ensuring an even distribution of the water jets on the interior surface of the container to be cleaned. The impulse is generated by end limit switches on the lifter. The cleaning duration can be adjusted variably depending on the degree of soiling. The dirty water is pumped from the solids chamber into the dirty water tanks. Waste residues are emptied via the pneumatically operated flap at the bottom of the solids chamber. The cleaning of the dirty water tank and the collection box is carried out automatically via flat jet nozzles.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Year of manufacture: 2013 Milling head Working area X: 3000 Working area Y: 900 Working area Z: 50 Separate units: 1 Vertical drill: 12 Horizontal drill X: 4 Horizontal drill Y: 2 Iiedpfxozxyfzs Apcog Grooving saw: Yes Stationary machine: Yes Clamping system: Clamps Safety feature: Photoelectric cell Controls and software SCM XILOG Minimum dimensions: 3920x1170x2150

Condition: excellent (used), Walter+Bai LFV100-HH Servo-hydraulic Universal Testing Machine Manufacturer: Walter+Bai AG, Switzerland Type: LFV100-HH Year of Manufacture: 2019 Machine Type: Servo-hydraulic Universal Testing Machine / Material Testing Machine Testing Force: 100 kN For sale is a used servo-hydraulic universal testing machine from Walter+Bai AG, including the PAC-40 hydraulic unit, PCS8000 digital controller, industrial PC, original Walter+Bai testing software, software dongle, GTM load cell, and extensive accessories. The system is suitable for professional tensile, compressive, material, and component testing in testing laboratories, research and development, quality assurance, and industrial manufacturing. The original Walter+Bai testing software, the associated software dongle, and the industrial PC are included in the scope of delivery. This provides a complete operating and evaluation system for the testing machine. Technical Data: Manufacturer: Walter+Bai AG, Switzerland Model: LFV100-HH Machine Type: Servo-hydraulic Universal Testing Machine Series: LFV 100 kN Factory Number: 2279 Order Number: K29788 Year of Manufacture: 2019 Iisdpfxjzlz Rxe Apcog Maximum Testing Force: 100 kN Control System: Walter+Bai PCS8000 Digital Controller Digital Testing Machine Control System Original Walter+Bai Testing Software Available Original Software Dongle Available Industrial PC Included in Scope of Delivery Load Cell: Manufacturer: GTM Testing and Metrology GmbH Type: DR-F Measuring Range: 125 kN Sensitivity: 2 mV/V Serial Number: 68134 Year of Manufacture: 2019 Made in Germany Hydraulic Unit: Manufacturer: Walter+Bai AG Type: PAC-40 Factory Number: 2279-1 Year of Manufacture: 2019 Servo-hydraulic Hydraulic Unit Water-cooled Version Designed for Continuous Operation PCS8000 Digital Controller Mounted Dimensions: Testing Machine (W × D × H): approx. 1,200 × 1,245 × 3,378 mm Hydraulic Unit PAC-40 (W × D × H): approx. 800 × 1,250 × 1,650 mm Weight: Testing Machine: approx. 2,500 kg Hydraulic Unit PAC-40: approx. 980 kg Clamping System: 2 × Mechanical Wedge Grips Walter+Bai WGR-100-M Several Sets of Gripping Jaws Clamping and Mounting Accessories as Shown in Pictures Equipment: Walter+Bai LFV100-HH Universal Testing Machine Walter+Bai PAC-40 Hydraulic Unit Walter+Bai PCS8000 Digital Controller Industrial PC Original Walter+Bai Testing Software Original Software Dongle GTM Load Cell 125 kN 2 × Mechanical Wedge Grips WGR-100-M Several Sets of Gripping Jaws Handheld Control Unit Separate Control Unit with Emergency Stop Testing and Mounting Accessories as Shown in Pictures Condition: Used Year of Manufacture 2019 Optical Condition as Shown in Pictures Scope of Delivery: Walter+Bai LFV100-HH Universal Testing Machine Walter+Bai PAC-40 Hydraulic Unit Walter+Bai PCS8000 Digital Controller Industrial PC Original Walter+Bai Testing Software Original Software Dongle GTM Load Cell 125 kN 2 × Mechanical Wedge Grips WGR-100-M Sets of Gripping Jaws Handheld Control Unit Control Unit Other Accessories as Shown in Pictures Scope of delivery as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: used, ESTEVE double interior silo unit 2 independent storage cells Capacity 2 x 1,500 kg, totaling 3,000 kg Dry bulk product, likely flour Iisdpfjzx Thcex Apceg Dimensions: 5300 x 2580 x 2630 mm Electrical supply: 380 V Common support frame for both silos Two metal silo bodies 1 - Filling: connection and piping Ø 80 mm Cell feeding via filling circuit 2 - Storage: 2 cells of 1,500 kg Separation of 2 batches or compatible products Graduated level indicators on both cells Front inspection ports 3 - Discharging: hoppers at the bottom Product directed towards the extraction system 4 - Extraction: mechanical system with rollers Product extraction at the outlet of the cells 5 - Screening: integrated sifter Sifter motor 0.75 kW according to installation sheet 6 - Transfer: pneumatic system RBL 10 Transfer motor 3 kW according to installation sheet Piping circuit of approximately 25 m Distribution piping included 7 - Filtration: textile filter sleeves Motors installed at the bottom Integrated storage, extraction, screening, and transfer Brand: ESTEVE, now integrated into Shick Esteve The ESTEVE JE 2500 double interior silo unit is a professional, used equipment designed for storing dry bulk ingredients. It includes two independent 1,500 kg cells each, for a total capacity of 3,000 kg. The identified use is likely related to flour or compatible powdered dry products. The unit combines storage, mechanical extraction, screening, filtration, and pneumatic transfer in a single installation powered by 380 V. Why this model stands out The JE 2500 is not limited to storage; it brings together several functions necessary for handling a bulk ingredient. Its two cells allow for the separation of two batches or two compatible products, while extraction via rollers ensures the mechanical removal of the product. The integrated sifter and RBL 10 pneumatic transfer system complete the installation for organizing its flow. This configuration is particularly advantageous when a project requires a professional interior flour silo with several pieces of equipment already grouped on the same frame. Key advantages Two independent 1,500 kg cells Total storage capacity of 3,000 kg Mechanical extraction via rollers Pneumatic transfer system type RBL 10 Sifter integrated into the unit Filtration with textile sleeves Filling via Ø 80 mm connection Front inspection ports Graduated level indicators on both cells Unit installed on a common support frame

Condition: used, mileage: 154,360 km, power: 103 kW (140.04 HP), first registration: 09/1998, fuel type: diesel, empty load weight: 3,920 kg, maximum load weight: 3,580 kg, overall weight: 7,500 kg, tire size: 365/80R20, axle configuration: 4x4, wheelbase: 2,830 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 2, loading space length: 1,950 mm, loading space width: 1,900 mm, loading space height: 400 mm, Equipment: additional headlights, all wheel drive, cabin, differential lock, low noise, power assisted steering, trailer coupling, Vehicle location: Bovenden, steel body, short cab, high roof, air-suspension seat, rear window, 8-speed gearbox, ABS (anti-lock braking system), constant throttle, auxiliary drive, raised exhaust, differential lock, long-range headlights, rotating beacon, trailer hitch ball, towing device, low-noise G1, winter service equipment, swing-out tailgates, roof hatch. Wheelbase: 2830 mm, Body: 3-sided tilting body, axle ratio: slow, trailer brake system, two-line, mounting brackets front, mounting brackets rear, higher cab roof, fine dust and pollen filter, sound and heat insulation for cab, auxiliary transmission with intermediate and super-crawl gear, dual clutch, shift plate, hydraulic system with 4 circuits, tilting cylinder, hydraulic connection at the rear 6-way, hydraulic connection at the rear 4-way, cell 3+4, separate return line at the rear, hydraulic connection at the front 4-way, cell 1+2, hydraulic connection at the front 4-way, cell 3+4, separate return line at the front, engine brake, engine PTO switchable, PTO front 1 3/8 keyway, PTO rear split 1 3/8 keyway. Iiedpfx Aszx Tlzopcjg Loading height approx. 1420mm! Approx. €3,000.00 invested (paint, refurbishment and technology). Matching snowplow -9996- available for an additional charge of €1,500.00 net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, power: 180 kW (244.73 HP), fuel type: diesel, number of seats: 29, gearing type: mechanical, axle configuration: 4x4, emission class: euro3, color: white, suspension: steel, tire size: 365/80 R 20, wheelbase: 4,160 mm, Year of construction: 2025, Equipment: air conditioning, all wheel drive, power assisted steering, traction control, - Autoradio - CD - Heater LOOKING FOR A 4x4 PASSENGER BUS FOR DEMANDING OPERATIONS? When passenger transport needs to continue beyond paved roads, a conventional bus may not be enough. The Mercedes-Benz Atego 1725A 4x4 Passenger Bus combines a robust Mercedes-Benz commercial vehicle chassis with 29+1 passenger seats, 245 HP EURO 3 power, front and rear differential locks and off-road tyres. With independent passenger air conditioning, an insulated purpose-built bus body, rear-view camera and integrated roof rack, this Atego is designed for reliable passenger transport across remote sites, infrastructure projects and demanding regional routes. AT A GLANCE - Mercedes-Benz Atego 1725A 4x4 - 29 + 1 Passenger Seats - 245 HP / 180 kW - EURO 3 Diesel Engine - Front & Rear Differential Locks - Mercedes-Benz G 85-6 Manual Transmission - Mercedes-Benz VG550 Transfer Case - 365/80 R20 Off-Road Tyres - Independent Passenger Air Conditioning - Steel Body with Anti-Corrosion Treatment - Insulated Passenger Compartment - Aluminium Exterior Panelling - Rear-View Camera - Integrated Roof Rack Why This Configuration? Passenger transport becomes more challenging when the destination is located away from conventional road networks. The Mercedes-Benz Atego 1725A combines 4x4 capability with a dedicated 29+1-seat passenger body, creating a specialised solution for organisations that need to transport groups reliably across demanding operating environments. The Mercedes-Benz six-cylinder engine produces 245 HP / 180 kW, while the manual G 85-6 transmission and VG550 transfer case form the basis of the 4x4 drivetrain. Front and rear differential locks provide additional traction when conditions become difficult. Built for Demanding Routes Mining operations, infrastructure developments, construction sites and remote projects often require regular passenger transportation over gravel roads, unpaved routes and difficult access roads. That is where this Atego differs from a conventional passenger bus. Iisdpfx Apey Rtylocog Its 4x4 drivetrain, front and rear differential locks and 365/80 R20 off-road tyres provide the mobility required when paved-road transport is no longer enough. The result is a passenger vehicle designed to keep teams moving between locations where conventional buses may struggle. 29+1 Passenger Capacity The purpose-built body provides seating for 29 passengers plus one additional seat, using fixed-back seats throughout the passenger compartment. This provides practical capacity for transporting complete teams in a single vehicle while retaining the mobility of a two-axle 4x4 platform. An independent air-conditioning system with its own power pack supports passenger comfort, particularly during operation in warm climates. Purpose-Built Passenger Body The passenger body uses a steel structure with anti-corrosion treatment, aluminium exterior panelling and closed-cell polystyrene insulation. Marine plywood flooring provides a robust structural base, while a dedicated passenger entrance supports regular boarding and disembarking. Additional equipment includes a rear-view camera for easier manoeuvring and an integrated roof rack for luggage or additional equipment. Why Buy from Schaften Automotive? Since 1977,...

Condition: used, mileage: 44,194 km, power: 103 kW (140.04 HP), first registration: 08/2024, fuel type: diesel, fuel: diesel, color: white, emission class: euro6d, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, traction control, truck registration, ,, * More 1500 vehicles can be found on our homepage, leasing and financing also possible without down payment!\*Our prices are cash collection prices, i.e. additional work such as retrofitting a tow bar, second set of tires, customer service, warranty, carefree packages, etc., will be charged additionally.\*Despite the greatest care, advertising errors cannot be excluded and are therefore without guarantee! Input errors, prior sale and errors excepted. Equipment and consumption details are based on the VIN data query via the DAT SilverDAT system. The VIN details are not part of the purchase contract.\*Our new cars: Due to various manufacturer specifications, it is possible that these have already received a daily and short-term registration or will receive one before sale. ... Subject to changes, prior sale and errors excepted Iiodpezyfvhsfx Apcjg

Year of construction: 2021, condition: good (used), functionality: fully functional, Moisture Analysis Device Computrac® Vapor Pro® XL Autosampler From the dismantling of a battery cell manufacturing line Automated, chemical-free moisture analysis The Vapor Pro XL (VPXL) Autosampler is the further development of the Vapor XL, incorporating the latest moisture-specific analysis technology. The VPXL Autosampler offers an automation function for up to 16 samples with individual test profiles. Measuring range (moisture): 10 ppm (10 µg | 0.001%) - 100% Iedjzx S Etepfx Apcsig Number of samples: Up to 16 Moisture resolution: 1 ppm (0.1 µg | 0.0001%) Weight: 18.6 kg Dimensions: 737 L x 394 W x 208 H mm Results: % moisture, ppm moisture, µg water Data storage: Includes up to 250 test programs, stores the last 1000 test results, and the last 100 test diagrams.

Condition: excellent (used), Year of construction: 2011, operating hours: 3,197 h, lifting height: 4,500 mm, free lift: 1,410 mm, fuel type: electric, mast type: triplex, fork length: 1,150 mm, total height: 2,070 mm, color: other, GVW: 1.707 kg Ijdpfxozqv Ayj Apceig Lifting capacity: 1.200 kg NEW BATTERY CELLS 24V 3PzS 375Ah 2026, 220V high-frequency charger, Fork length 1150 mm, Space between forks 660 mm, Machine width 900 mm, Power steering,

Condition: used, mileage: 189,000 km, power: 95 kW (129.16 HP), first registration: 11/2007, fuel type: diesel, overall weight: 3,500 kg, color: green, gearing type: mechanical, emission class: euro4, number of seats: 3, total length: 6,000 mm, loading space length: 3,400 mm, Equipment: ABS, central locking, soot filter, Buy online. Finance digitally. Get nationwide delivery. ----Chat now via WhatsApp: Get in touch quickly and easily with our sales consultant. Internal ID number: [3502]---- Your advantages with us: * Digital consultation via telephone or WhatsApp * Financing options also without a down payment * Trade-in of your vehicle, whether old or new Optionally bookable: * 12–60 months used car warranty (valid throughout the EU) * New inspection * New TÜV & AU (German vehicle inspection) * Nationwide delivery---- Summer offer: If desired and for an additional charge of only €999, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). Vehicle highlights: 19% VAT can be shown 2nd owner German vehicle Regularly maintained Immediately ready for use Accident-free Platform body = 3,400 mm long / Width = 2,050 mm Payload = approx. 1,500 kg Total weight = 3,500 kg Special equipment: Trailer socket 13-pin, Battery 100 Ah, Ladder rack at the end of the platform body, Ladder rack behind the cab, Spare wheel in driving condition, Spare wheel holder under the end of the frame including jack, Interior rearview mirror, Rear wall with window, Mud flaps rear, Mud flaps front, Seat cover / upholstery: Artificial leather (cab), Seats in the cab: Co-driver double seat, Stabilizer rear reinforced, Stabilizer front reinforced, Storage compartment left and right below the platform body / superstructure, Shock absorbers reinforced, Preparation for mobile phone / cell phone, Front axle reinforced, Pre-wiring for tachograph Additional equipment: Airbag driver side, Display for windshield washer fluid level, Exterior mirrors electrically adjustable and heated, both, Exterior mirrors with integrated turn signal, Headliner in the cab, Glove compartment lockable, Body / Superstructure: Platform body standard, Fuel tank: Main tank 75 liters, Headlamp range adjustment, Truck registration, Engine 2.1 liters - 95 kW CDI CAT (2148 ccm), Wheelbase 3665 mm, Low emission according to exhaust standard Euro 4 Group III, Maintenance interval display Assyst, Heat-insulating glazing, Permissible total weight 3.5 t---- Ijdpfx Aezy T E Dspcoig Do you want to lease or finance? We offer attractive offers - also possible without a down payment! Please contact us. Contact: Phone: WhatsApp: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. All information on the Internet is non-binding and serves only as a general description of the vehicle. Errors, typos, and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances.

Condition: new, pressure 30 t throat 200 mm stroke 0 - 60 mm Iedpfsxabvkjx Apcsig table: 400 x 600 mm table: 150 mm - Bohrung no. of strokes 140 Hub/min bore 40,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 300 mm total power requirement 3,0 kW weight 1.670 kg range L-W-H 1150 x 1350 x 2050 mm Furnishing: - Welded steel structure body frame - AISI 4140 (42CrMo4) alloy steel crankshaft - CNC ground for maximum precision SnBz-12 quality - Bronze bearings, ground for minimal surface resistance - 4 sides pneumatic clutch-brake combination - PLC control for safety (PILZ Germany) - Photo cell light barriers around the work table (PILZ Germany) - Two-hand and foot pedal control - Adjustable stroke - Central lubrication system - CE safety approval by TÜV - electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRON

Condition: good (used), Year of construction: 2011, functionality: fully functional, Press force: 36 t Bending length: 1020 mm Distance between uprights: 932 mm Overhang: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-axis working speed: 10/25 mm/sec Y-axis rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805 x 1330 x 2380 mm TruBend 7036 Cell Edition Standard equipment: TruBend 7036 Cell Edition: - Electromechanical direct drive (torque motor) - Rear stop system with 6 axes and stop sensors - Positionable Wila tool clamping system - Control cabinet air conditioning BendMaster: - Stable base and manipulator - Load capacity 15 kg, max. sheet weight 3 kg Isdpfezwla Uex Apcjig - Floor-mounted track, welded construction with stable guide rail - Travel range 3215 mm - Gripper coupling on the BendMaster - Electric drives - Tongs with jaws LoadMaster Bend: - Handling system - Multi-suction device - Double sheet detection and singulation - Transfer system - System pallet Safety: - Protective enclosure with pivoting sliding doors Control: - PC control with 19" touchscreen - Mobile operating terminal - Network connection - Remote service via the Internet

Condition: used, Year of construction: 2010, operating hours: 66,000 h, machine/vehicle number: PR23, Used NEGRI BOSSI 800T injection molding machine - year 2010Technical Specifications & Performance DataThis Negri Bossi VECTOR 800T injection molding machine delivers high-output performance for large-format plastic parts and packaging components. As a second hand industrial machine from 2010, it combines robust mechanical design with generous mold space and powerful injection characteristics, ideal for heavy-duty applications and supporting upstream production for industrial packaging and beverage production accessories.Manufacturer: Negri BossiModel family / code: VECTOR 8000H8400 (V800 designation)Year: 2010Working hours: 66000Screw diameter: 110 mmShot volume: 5160 cm³Shot weight: 4700 gInjection pressure: 1620 barEjection stroke: 350 mmTie bar spacing (H x W): 950 x 1100 mmPlaten size (H x W): 1400 x 1550 mmOpening stroke: 1080 mmMold height (min–max): 400–1100 mmCore pull circuits: 4 (2+2)Air circuits: 4Robot interface: YesMachine dimensions (L x W x H): 10850 x 2600 x 2305 mmMachine weight: 38750 kgAdvanced Automation & Control SystemsThe VECTOR platform is engineered for reliable automation and process stability. This unit is equipped with a robot interface for seamless cell integration and features multiple core pulls for complex tooling strategies. The electrical screw motor option provides precise dosing control and energy-efficient plasticizing.Integrated robot interface for automated part removal and in-mold operations4 core pull circuits (2+2) to support advanced mold functions4 pneumatic air circuits for auxiliary tooling requirementsElectrical screw motor option for accurate dosing and repeatabilityProduction Line Integration CapabilitiesThis injection molding machine can operate as a standalone cell or integrate within a broader industrial packaging workflow. It is well-suited for producing large or multi-cavity parts used in packaging systems and can support upstream manufacturing for components associated with a used bottling line or beverage production environment.Inline or standalone operation with engineered robot interfaceAccommodates complex tooling and multi-cavity moldsCompatible with automated conveyors, part handling, and quality stationsSupports format changes through mold/tooling exchange and core pull configurationMachine Condition & Maintenance HistoryThis second hand Negri Bossi injection molding machine from 2010 shows 66000 operating hours. Presented in working condition and ready for operation, it is suitable for facilities seeking proven performance and reliable uptime within industrial packaging or component manufacturing.Operational status: Ready for ... Ijdpfxsziyy To Apcjig

Condition: used, Year of construction: 2009, operating hours: 69,500 h, machine/vehicle number: PR26, Used NEGRI BOSSI 700T injection molding machine - Year 2009Technical Specifications & Performance DataThis Negri Bossi injection molding machine delivers high-output performance in the 700-ton clamping class, ideal for producing technical plastic parts and PET preforms that feed downstream used bottling line and industrial packaging operations. Built in 2009, it combines robust Italian engineering with a versatile injection unit and advanced controls for demanding, continuous-duty manufacturing environments common in beverage production supply chains.Manufacturer: Negri BossiModel: VECTOR 7000 H 6500Year: 2009Working hours: 69500Clamping class: 700-ton classScrew diameter: 110 mmShot volume: 4750 cm³Shot weight: 4320 gMaximum injection pressure: 1670 barCore pulling: 4 (2 + 2)Robot interface: YesAir circuits: 4Ejection stroke: 350 mmOpening stroke: 1000 mmMould height (min–max): 400–1000 mmTie-bar spacing (H × W): 900 × 1000 mmPlaten size (H × W): 1340 × 1410 mmOverall dimensions (L × W × H): 1000 × 2340 × 2400 mmWeight: 30000 kgOption: Electric dosing motorControl system: DIMIELAdvanced Automation & Control SystemsThe machine is equipped with a DIMIEL control system featuring a clear HMI for fast setup, monitoring, and optimization. Core-pull functions (2 + 2) and multiple air circuits are programmable to support complex molds and automated sequences. The integrated robot interface enables seamless connection to handling robots for part take-out, insert loading, or downstream packing, enhancing OEE and reducing cycle time variability. Safety interlocks, guarded access zones, and centralized control help operators maintain stable, repeatable processing with quick parameter adjustments and recipe management.Production Line Integration CapabilitiesThanks to its robot interface and flexible I/O, this injection molding machine integrates smoothly into plastics manufacturing cells feeding beverage production and industrial packaging workflows. It supports inline or standalone operation and pairs well with resin dryers, loaders, mold temperature controllers, and quality inspection systems. For PET preform applications, it can be positioned upstream of stretch blow molding machines that supply PET bottles to used bottling line and second hand packaging machinery.Machine Condition & Maintenance HistoryThis unit is a second hand machine with 69500 operating hours. It is presented in working condition and ready for operation, suitable for facilities seeking reliable capacity expansion without the lead time of new equipment. The robust Negri Bossi Vector platform and the electric dosing motor option contribute to stable performance and efficient plasticizing o... Iedpfxeziyzdo Apcsig

Condition: used, Year of construction: 1994, machine/vehicle number: GA24, Used ROBINO & GALANDRINO Wirehooder record 10-2Technical Specifications & Performance DataThis Automatic Wirehooder is a compact, high-performance wirehood applicator designed for sparkling wine and premium beverage closures. Built for reliable operation on glass bottles, it delivers precise wirehood positioning and twisting for consistent, secure muselet application at industrial speeds.Machine type: Automatic Wirehooder (wirehood/muselet applicator)Model: Record 10/2Year of manufacture: 1994Refurbishment: Overhauled in 2017Production speed: 10,000 bphContainer material: Glass bottlesInfeed direction: ClockwiseWirehood magazine: High-capacity, long-autonomy designSupported wirehood styles: Collio, Collio light, Collina, Lia, Sile, Extra L, Valdobbiadene, Elegance, Artù, Piave, Monterossa, Cru, Magnum CollioAdvanced Automation & Control SystemsEngineered for stable, repeatable operation, this wirehooder features automated feeding and consistent torque application to protect cork integrity while ensuring firm cage tightening. The long-autonomy magazine reduces manual replenishment for improved uptime on a used bottling line or integrated second hand packaging cell. Operator-friendly controls support quick setup and process monitoring for efficient beverage production.Automated wirehood feeding with alignment and controlled twist applicationHigh-capacity magazine to extend runtime between reloadsOperator controls for speed and format parametersStandard safety interlocks and emergency stop circuitsProduction Line Integration CapabilitiesThis wirehooder integrates seamlessly downstream of a corking machine on glass bottling lines. It can function as a standalone module or as part of a synchronized industrial packaging line with upstream and downstream conveyors, accumulation, and inspection systems.Inline or standalone operation with conveyor interfacesDesigned for glass bottle handling in sparkling applicationsFormat changeover kits support various wirehood styles listed aboveSuitable for integration into complete bottling and beverage production linesMachine Condition & Maintenance HistoryThe unit was manufactured in 1994 and underwent a refurbishment in 2017, providing renewed reliability of key components and alignment systems. It is presented in good working order and ready for operation, ideal for facilities seeking robust second hand bottling equipment with proven performance.Operational Performance & VersatilityOptimized for sparkling closures, the machine handles a broad range of wirehood designs without compromising on application quality. Its high-speed performance supports commercial throughputs, while the magazine capacity helps maintain continuous operation and minimize changeover interruptions.Consistent cage placement and twist control for secure closureWide compatibility with premium wirehood styles for different brand aestheti... Iodpfxozmpzuj Apcoig

Condition: used, Year of construction: 1996, operating hours: 26,000 h, machine/vehicle number: R94, Used Tetra Pak TBA 19 200ML Slim Filling machineTechnical Specifications & Performance DataThis aseptic carton filling machine is a second hand Tetra Pak TBA 19 V10 configured for the 200 ml Slim format. It has been workshop checked, fully tested, and received a total refurbishment in 2026 to ensure reliable performance for industrial packaging and beverage production environments. Ideal for a used bottling line upgrade or as a standalone aseptic packaging cell, it integrates smoothly with downstream equipment for complete end-of-line solutions.Manufacturer: Tetra PakModel: TBA 19 V10Machine type: Aseptic carton filling machineYear of manufacture: Approx. 1996Running hours: Approx. 26,000Format/volume: 200 ml SlimRefurbishment: Total refurbishment completed in 2026General condition: Workshop checked, fully tested, good working orderAdvanced Automation & Control SystemsEngineered for consistent aseptic performance, this filling machine features an integrated control philosophy typical of Tetra Pak systems, supporting efficient start-up, stable throughput, and simplified format handling for the 200 ml Slim line. Centralized operator control via HMI streamlines operations and facilitates guided changeovers and diagnostics. The machine has been fully tested under workshop conditions, with live online test runs available to verify automation responses and process stability using water-filled packages. Safety interlocks and guarding are present across the production cell to protect operators during operation and maintenance.Production Line Integration CapabilitiesThe TBA 19 V10 can operate as a standalone aseptic filler or as part of a complete used bottling line for beverage production. The included conveyor set—approximately 30 meters with four 90° curves and two chain tensioners—ensures smooth transfers to downstream packaging modules. The TCBP 70 Multiinfeed tray packer is compatible/optional for wrap-around applications, while the TTS 51 tray shrink wrapper provides flexible secondary packaging options.Machine type/categoryManufacturer / ModelYearFilling MachineTetra Pak TBA 19 V101996 (approx.)Straw ApplicatorTetra Pak TSA 21ConveyorsApprox. 30 m with 4 x 90° curves, 2 x chain tensionersShrink WrapperTetra Pak TTS 51Case/Tray PackerTetra Pak TCBP 70 Mul... Iisdszrgqwspfx Apcog

Condition: used, Year of construction: 2000, operating hours: 15,800 h, Used Bottle Washer KLINGER up to 9600 bph This Bottle Washer handles up to 9,600 bottles per hour. The machine features 20 bottles per row, ensuring a long soaking time and double lye pumps. Constructed entirely of stainless steel, this bottle washer uses a Siemens S7 control system, ensuring reliable and precise operation. Technical Specifications of the Washing System The Used Bottle Washer KLINGER up to 9600 bph includes double heaters and overflow pumps, providing a high cleaning capacity. Consequently, this configuration treats each bottle uniformly, enhancing the efficiency of the washing process. The Siemens S7 control system, furthermore, offers a user-friendly interface via a touch panel, simplifying operational management. Potable Water Treatment Plant Potable water treatment plays a crucial role in the proper functioning of the bottle washer. Hager + Elsässer provides the plant, which includes cation and anion exchangers, a salt container, a pre-filter, and a UV probe. This system processes 5 m³/h, ensuring high-quality water. Additionally, the reverse osmosis (RO) plant delivers a total desalination capacity of 2.5 m³/h, ensuring pure water for the washing process. Electrical Configuration and Control Panels This Bottle Washer features three electrical panels, arranged from left to right, with a Siemens touch panel for centralized control. This configuration allows for accurate monitoring and optimal operational management. In addition, the upper panels handle cooling, with a total residence time of 4.13 minutes and a treatment time of 1.63 minutes. Technical details Bottle cells: width and diameter: height 100 mm. 360 mm spray hole in the base of the cell diameter 20 mm. The bottle cell is not round on the lower insertion side, but flattened , so that even bottles with small diameters can be inserted into the cell without any problems. Bottles from 200 ml to 1,500 ml can be rinsed. The diameter of the bottle mouth must not be smaller than the spray hole in the bottom of the cell, i.e. at least 20 mm. If the bottles are very light, or made of PVC, the spray pressure of the pumps could be reduced using software, so that the bottles are not sprayed out of the cell. Fort PVC bottles the diameter of the bottles should not be smaller than 50 mm, depending on the shape and weight. The higher the weight, the better… PVC bottles do not cause problems because of their shape or diameter, but are usually too light… So your bottles can be easily worked. Treatment and Spraying Details of the Used Bottle Washer KLINGER up to 9600 bph The central panel, on the other hand, manages the spraying times with the following specifications: Spraying soda: 0.5 min. Residual soda: 0.83 min. Hot water: 0.38 min. Iodpexqmrfofx Apcjig Warm water: 0.38 min. Cold water: 0.38 min. Fresh water: 0.

Year of construction: 2014, condition: good (used), power: 260 kW (353.50 HP), color: yellow, machine/vehicle number: 214034, Painting-drying booth with semi-vertical air flow "ITALO-1-SV", brand Lackro, manufacturer Eco-Air Technology S.R.L. Italia, year of manufacture: 2014 Cabin interior dimensions: length 14.06 m X width 5.04 m X height 4 m, maximum air flow: 40-45000 mc/h, thermal power: 260 Kw, fuel: diesel, installed electric power: 26 Kw three-phase, tank fuel included, the cabin has a special lighting system, 30 superior filter cells for purification with carbon, dimensions: 500x500x50 mm, side service door, two central hinged doors, trolley for parts, burner chimney on diesel, the cabin has the user and maintenance manual Attention customers: this cabin will be delivered disassembled and loaded for transport from our company headquarters in Oradea. Industrial drying painting cabin "ITALO-I-SV" MOD. ECO – L=14,060 mm x w=5,040 mm x H=4,000 mm with semi-vertical air flow Suction group Suction and filtration unit ECO-SM-5 Maximum air flow at 250 Pa m3/h 40,000-45,000 Maximum thermal power kW 260 VATRA 232 Fuel type DIESEL Installed three-phase electric power: kW (2x7.5) +(2x5.5) Filter cells 500 mm x 500 mm x 500 mm 30 pieces Bag filter Ǿ 280 x 1000 mm pieces 10 Ceiling grid 975 x 1855 mm 28 pieces Generator pre filters 1,000 mm x 800 mm x 50 mm pieces 2 Iiodpfx Apjp S Tlhocog Andreae suction wall filter 0.9 m x 5 m pieces 3 The maximum size of the piece in the cabin L=12 m x w=3 m x H= 3.2 m For any details, do not hesitate to contact me by phone. Price 79.900 Euro + VAT, Ex Works Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, mileage: 27,066 km, power: 103 kW (140.04 HP), first registration: 06/2025, fuel type: diesel, fuel: diesel, color: black, emission class: euro6e, Year of construction: 2025, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, second-hand vehicle warranty, sliding door, traction control, truck registration, ,, * More 1500 vehicles can be found on our homepage, leasing and financing also possible without down payment!\*Our prices are cash collection prices, i.e. additional work such as retrofitting a tow bar, second set of tires, customer service, warranty, carefree packages, etc., will be charged additionally.\*Despite the greatest care, advertising errors cannot be excluded and are therefore without guarantee! Input errors, prior sale and errors excepted. Equipment and consumption details are based on the VIN data query via the DAT SilverDAT system. The VIN details are not part of the purchase contract.\*Our new cars: Due to various manufacturer specifications, it is possible that these have already received a daily and short-term registration or will receive one before sale. Isdpfx Apjzckfujceig ... Subject to changes, prior sale and errors excepted