Used Bodo Gerhard Celle for sale (4,436)

Condition: excellent (used), • Sturdy, stable aluminium base • Two guides for smooth travel Gbsdpfew Rdt Iex Agbsg • LCD display with clear readout • Functions: ON/OFF, ZERO, HOLD, PRESET • Original “Made in Japan” quality • Readable serial number – authenticity guaranteed • Very good condition – used, tested equipment • No play, accurate and repeatable measurement • Ready for use – no additional accessories required An excellent tool for workshops, toolrooms, quality control departments, and precision measurement tasks.

Condition: used, machine/vehicle number: YV2RT60FXKA84xxxx, mileage: 5,874 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 20511 Specifications: - 2021 model - 5874 km (will increase slightly) - Eu-approved until: 21.02.26 - Euro 6 engine - 8x2 - 551 Hp - Suspension on 1st and 2nd axle: Steel - Suspension on 3rd and 4th axle: air - 2 x 110 liter variable pumps - 2 x manual extensions for main boom and 2 x for jib - Scanreco optical remote control (Top model) - Weight cell main boom - Extra function for main boom and jib - Auto leveling (The car puts itself in a level position ready for lifting.) - Virtual room (Possibility to limit all axes with a few keystrokes, no need to go to a workshop for this. Brilliant when working under high voltage etc.) - SKF central lubrication of the crown and up to the first joint - Extra function fully extended on jib - Single winch hook (Jib / main boom) - 2-part winch hook (Jib / main boom) - 4-part winch hook (Main boom) - Hook for jib - Hook for main boom (Large hook) - Emergency lowering unit (24 volts) - Wire stop sensor and sleeve - 4 ton winch - Diagnostic cable for online help (Remote help) - Danfoss valve center - 2 x 2 ton counterweight (Must only be used for cranes above the cabin otherwise the counterweights are not needed, and these can be removed as needed) - Front support leg Construction: - 4 x work lights strategically placed inside each support leg cabinet. - 50" LED bar work light rearward on the cabin - Powerful LED lamps in the crane. - VBG mount, with air servo control unit mounted in the rear cabinet left side. - Bracket on the roof - 2 pcs high beam LED bar on the roof forward (daylight!!). - Orange work warning LED beam on the roof. - EasyUp foldable ladder in the side with railing. - Boxes for chain, chainsaw etc. Mounted on the rear support leg so that these are driven out together with the support leg and are at the same time packed away while driving. - Charger for control in the cabin - Plastic internal screens axle 3 and 4. - 3 edge pull-out cabinet between axle 3 and 4 - On the left side between axle 2 and 3 there is a large cabinet with 500 W fan heater installed to hang clothes to dry etc. - Plane / bottom at the rear closed with alloxed aluminum floor plates that are cut to fit the car perfectly, with rounded edges for a very professional send. - CNC manufactured plates up the rear edge of the cabin. - Fully painted sides, cabin and stern. - Resting cradle for crane for driving without jib. - 5 support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cradles at the rear on the "level" - Right side large cabinet 1.2 x 1 meter - Powerful LED back / work lights at the rear. - Rear part of the car rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. - Hatches strategically placed for access to relevant devices under the bodywork. - Precisely cut out fields in the side coverage for access to the screen, manual controls, emergency lowering functions etc. - Marker lights along the side mounted so that they flash together with the turn signals / direction indicators Gbodpfx Agewphixsbog - Cradle to hold the jib when not in use. - Hydraulic extra function dismantled main boom and jib, but mounted if desired. - Kettle...

Condition: excellent (used), Bargain from Swiss liquidation in excellent condition: Höfer press 2500/1300 with electric plates Gsdpsx Tbh Aefx Agbjbg

Condition: used, mileage: 94,000 km, power: 130 kW (176.75 HP), first registration: 04/2017, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 06/2026, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 7,800 mm, total width: 2,520 mm, total height: 3,380 mm, loading space length: 5,700 mm, loading space width: 2,450 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, parking heater, soot filter, tail-lift, Nissan NT 500 box truck + tail lift with sleeper cab * Lane departure assistant * Cruise control * Speed limiter * Air conditioning * Auxiliary heater * Navigation system * Hands-free system * Storage boxes * Side doors * Trailer hitch * Maul coupling * Ball head coupling Gbodpsx Tap Eefx Agbeg Towing capacity: 3,500 kg Tail lift: Palfinger 1,500 kg Cargo space: L 5.70 x W 2.45 x H 2.30 meters The vehicle is in excellent condition! Financing available!

Year of construction: 2018, operating hours: 2,071 h, condition: used, functionality: fully functional, machine/vehicle number: 10003545, Title: 2018 YXLON MU2000-D Industrial X-Ray Inspection System (NDT) – Excellent Condition, Only 2,071 Hours! Subtitle: Premium German Radioscopy System for Casting & Foundry | Digital Detector Array (DDA) | HDR Technology Description: Overview: We are offering a 2018 YXLON (Comet Yxlon) MU2000-D in exceptional condition, featuring only 2,071.4 operating hours. The system has seen minimal use and has been meticulously maintained, delivering performance and reliability on par with a new unit at a significantly reduced price point. This premium system is fully equipped with the optional Computed Tomography (CT) module, enabling advanced 3D defect analysis alongside standard 2D radioscopy. It is ideally suited for foundries, automotive suppliers, and R&D centers needing the accurate detection of porosities, cracks, and inclusions. Key Highlights: • Extensively Low Usage: Just 2,071.4 verified operating hours • CT Capability: Optional CT (Computed Tomography) module for 3D analysis included • Manufactured: 2018 (Modern Digital Configuration) Gbodpfx Ajx R N Tusgbog • Condition: Used, Fully Functional, Meticulously Maintained • Technology: Digital Flat-Panel Detector with High Dynamic Radioscopy (HDR) • Efficiency: Optimized for spot-check and high-throughput serial inspection • Origin: Made in Germany Technical Specifications: • Model: YXLON MU2000-D • Year of Manufacture: May 2018 • X-Ray Source: 160 kV VARIOFOCUS X-ray tube • Focal Spot: 1.0 mm / 0.4 mm (EN 12543, ICE336 compliant) • Detector Type: Digital Flat-Panel Detector (DDA) • Pixel Size: 200 μm • Image Processing: Y.HDR-Inspect – advanced noise reduction and contrast enhancement • Inspection Envelope: approx. 600 mm x 900 mm (Diameter x Height) • Sample Weight Capacity: Up to 200 kg • Manipulator: 5-axis manipulator for flexible part positioning • Software: DICONDE compliant Applications: • Aluminum and magnesium die-casting (engine blocks, knuckles, cylinder heads) • Automotive wheels & tires • Fiber-reinforced composites • Weld seam inspection Logistics & Terms: • Location: South Korea (Seoul/Incheon) • Availability: Immediately available • Terms: Ex-Works (EXW) or FOB Korea [Select preferred option] • Inspection: Video inspection or on-site visit available upon request Why Buy This Machine? Finding a 2018 YXLON MU2000-D with under 2,100 hours is extremely rare. This unit represents substantial savings versus new purchase, while ensuring long-term operational reliability. Contact us for the complete maintenance history and pricing details.

Condition: excellent (used), Year of construction: 2006, Ercolina CML TB-76 Pipe Bender Gbjdpou H Ibnefx Agbjg Excellent condition Year 2006 Foot Pedal Weight 193kg Power supply - 415v/3 phase

Condition: excellent (used), Manufacturer: REHM Type: Synergic. PRO 2 450-4 Machine condition: very good used ///// Price given for 1 pc ///// Welding current setting range 45A/16V - 450A/36.5V Weight ca.130kg SMC technology - Smart Machine Control A unique regulation concept for step-adjustable devices developed by Rehm: The welding arc length is regulated not only by measuring the welding voltage and current intensity but also by digitally determining the wire feed speed. This allows for achieving excellent welding effects and makes operation easy and safe. - SDI - Stepless Dynamic Induction The smoothly adjustable coil automatically takes care of the exceptional arc ignition properties and its high stability during welding. Adjustment can be done manually using the SDI knob. This allows for the regulation of the heat input, which can have a positive effect on the amount of necessary post-welding processing. - RSC – Realtime Speed Control Digital monitoring and regulation of the wire feed speed with high precision and in real time. By using RSC, changes in the arc length are compensated faster and more effectively. - CCM – Characteristic Curie Memory Gedpfx Agev Nrfxobsbg A database of welding parameters integrated in the device with expert knowledge. By selecting a set of wire type and diameter and welding current voltage level, the previously set welding parameters are synergistically selected. During welding, the current parameter values are compared with the set parameters and, if necessary, immediately corrected. - RMI – Rehm Machine Interface The control panel of the device is extremely simple and guarantees the avoidance of erroneous selection. Simple selection of parameters facilitates the welder's work and allows for minimizing errors and minimizing the time of setting the device.

Condition: used, mileage: 775,728 km, Year of construction: 2015, machine/vehicle number: YV3T2U825FA17xxxx, Field of application: Freight transport Please contact ATS Norway for more information Please provide reference number upon request: 20121 Specifications: - 2015 model - 775,728 km - Automatic transmission - 469 hp - 6x2 - Euro 6 engine - Tires (see pictures) - Suspension: full air - Hot water tank - Seating for 13 1 - Sleeping places: 12 - Sofa bed: 2 pcs if desired - New Battery - Converter - New exhaust system - Water tank approx. 200 liters - Large water tank approx. 150 liters - Heat pump - Toilet with vacuum and grinder - 230 v no thanks - Country road - 2 TVs Gbjdpewdu Nnefx Agbjg - Sound system - Seating area - Sofa bed - USB socket - Heat pump - Refrigerator - Freeze - Microwave oven - Service history - Air conditioning/ac - Self-exciting fire extinguisher in engine room - Total height of 3.8 m - Ready for delivery Notes from owner: 3 temperature zones in the bus. There is one in the lounge at the back, one in the beds where people want it colder, and one up front by the sea. Mains power only requires 230V, 16 amps, it powers the entire bus when the engine is off Water heater is powered by cooling water on the bus The owner states that it is possible to install seats in the space where the beds currently stand. Description: We have a Volvo 9700 B11R tour bus, which has seating for 13 1 and sleeping for 12 people with a practical sofa bed for sale. The bus has been used to transport artists on tour around Norway and is equipped with everything you can imagine for comfort and functionality. The bus will receive new EU approval before sale, and everything works as it should. It has been well maintained by the owner and is in excellent condition. With an impressive and functional interior, this is a bus with details out of the ordinary. It is immediately ready for delivery. Km: 775728 HK: 469 Technical approved: Yes EU-approved until: 28.11.2026 Own weight: 18500 Total Weight: 24750 Payload: 6175 Width: 255 Length: 1483 Euro: 6 Model: 9700 B11R Turnebuss m/ sitteplasser til 13+1 og sengeplasser til 12 stk + sovesofa . Gearbox: Automatic Number of seats: 13

Condition: used, WILLEMIN MACODEL W 408 S is a 5-axis machining center offering high precision, excellent accuracy and proven reliability. Travels X 250 mm, Y 200 mm, Z 300 mm; B axis -105°/+35° (140°), C axis 360°, resolution 0.001°. Spindle nose HSK 40, speeds 500–12,000 t/min (stepless). Work feed 15 m/min, rapid traverse 30 m/min. Supply 3x 380 V 50 Hz, air 6 bar; weight ≈1700 kg; dimensions L1700×W1950×H2200 mm. Tool magazine 24 positions. Enables tight tolerances; typical applications: watchmaking, automotive, aerospace, medical and machine tool sectors Gbedpfxjx S N Eae Agbjg

Condition: new, The KB 32 SFV PRO is a high-performance Column Drilling Machine from KNUTH, designed to deliver precision and efficiency for various drilling applications. This robust drill press features an automatic feed system and is particularly well-suited for single part productions and manual series work in both workshops and industrial settings. Made from premium high-quality cast iron, the sturdy base, column, table, and gear head ensure excellent rigidity and durability. The heavy, precision-ground work table is equipped with T-slots for optimal setup versatility. With an infinitely variable drive that boasts low maintenance, the KB 32 SFV PRO is complemented by a convenient touchscreen control panel. Operators can easily access functions such as spindle speed control and an electronically controlled quill feed. The integrated coolant system enhances performance, while the standard LED work light ensures optimal visibility. Experience the reliability of this drill press and enhance your operations—request a quote today to add the KB 32 SFV PRO to your drilling equipment lineup in the Column Drilling Machines category. Gjdpfx Agouyh Unobebg

Condition: excellent (used), Catalog number: 7294 TECHNICAL DATA - Maximum workpiece width: 230 mm - Minimum workpiece width: 15 mm - Maximum workpiece height: 160 mm - Minimum workpiece height: 10 mm 7 spindles: 1) bottom horizontal 230 mm 7.5 kW 2) right vertical 160 mm 5.5 kW 3) left vertical 160 mm 5.5 kW 4) right vertical 160 mm 5.5 kW 5) top horizontal 230 mm 7.5 kW 6) upper horizontal 230 mm 7.5 kW 7) lower horizontal 230 mm 5.5 kW - All spindles adjustable vertically and horizontally - Spindle diameter: 40 mm - Spindles 3, 5, and 6 are electrically adjustable from the control panel to the required dimension (ATS) - Motor: 2 x 0.37 kW - Spindle diameter: 40 mm - All spindles equipped with a brake Top feed: - 8 feed-in rollers, toothed, metal, including 2 double rollers - 3 feed-out rollers, rubber, double Bottom feed: - Feed-in roller, toothed, driven, pivoting - 3 feed-out rollers, driven, metal, smooth - Rollers pneumatically loaded - Infeed table length: 2480 mm - Centralized table lubrication - Electric thickness adjustment - Body lifting motor: 0.56 kW Gbsdpfx Ajx Swxhsgbjg - Infinitely variable feed speed via inverter: 6–24 m/min - Feed motor: 3.7 kW - Feed by Cardan shafts - Extraction nozzle diameter: 7 x 125 mm - Dimensions (L/W/H): 5520 x 1930 x 1900 mm - Weight approx. 4000 kg ADVANTAGES – Equipped with 7 heads – Ideal for both wet and dry timber – With ATS – Original DTR + CE documentation – Unrepainted – Used planer, in excellent condition Original photos Net price: 169,900 PLN Net price: 40,450 EUR (based on exchange rate of 4.2 EUR) (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2017, Excellent Condition Table Diameter - 320mm Max Workpiece size - 400 x 300mm Table loading capacity - 200kg T-slot size - 12 x 90 Travel X/Y/Z - 400/650/485mm Distance from spindle nose to table top - 0-485mm A axis travel (rotate along with X axis) +30 degree C Axis travel (rotate along with Z axis) 360 degree Spindle Spindle speed - Direct drive 12,000rpm Spindle taper - BT40 Spindle motor (cont./30min) - 11/15kW Spindle max. torque (cont./30min) - 70/95Nm Gbedpfx Asxmhbaogbeg Feedrate Linear guideway on X/Y/Z axis - Ball way 35/45/45 mm Rapid Traverse rate on X/Y/Z axis - 36,000 / 24,000 / 10,000mm/min Rapid traverse rate on A/C axis - 20/27rpm Cutting feedrate - 10,000mm/min Tool Magazine Tool Magazine - 24 pocket Max tool diameter / adjacent pocket empty - 80mm Max tool length - 300mm Max tool weight - 8kg Space requirement & weight Machine length x width 2950 x 2350mm Machine height 3140mm Machine weight 7200kg CNC Control - Fanuc 0MP Miscellaneous Pneumatic requirement - 6kg/cm power requirement - 40KVA coolant tank capacity - 400ltr

Condition: good (used), For sale: professional Vision Engineering Lynx Compact X6 stereo microscope, manufactured in the UK. This is a modern eyepiece-free microscope, providing a spatial 3D image without the need to place eyes against eyepieces – offering exceptional comfort for quality control and precision assembly tasks. Technical specifications: • Manufacturer: Vision Engineering Ltd. (UK) • Model: Lynx Compact X6 • Magnification: 6× (Compact X6 objective) • Type: stereo, eyepiece-free • Illumination: integrated LED in the base • Power supply: 230 V • Head with focus and height adjustment Godpfx Aoxtfqxogbjbg • Serial number: MFS 11572 • DGUV safety inspection – current safety test certification Condition: • Used item, optics are clean, mechanics fully operational. • Damaged upper cover of the plastic element (visible in photos) – does not affect operation or image quality. • Illumination is fully functional. • Device tested and ready for use. Applications: Laboratories, quality control, electronics, optics, and medical industries. Excellent for precision work, SMD soldering, PCB inspection, micromachining, and micromechanics.

Condition: used, Year of construction: 2024, Drive: Wheel CE mark: yes Serial number: cat0m315cke54xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21268 Specifications: 2024 model Certified to: 03/26 96 hours (will take a little while) 16930 kg 110.1 kW Additional hydraulics Good with tires Central lubrication Cut Break the boom Hanger coupling Hydraulic outlet for trailer S60 attachment Excavator bucket Sanding bucket Tiltrotator Fenders Tool cabinet Axle release Swinging on axles Light Radio Air conditioning/ac Ready for delivery   Description: We have a 2024 Cat M315 wheeled excavator for sale, equipped with: Excavator bucket Rotor tilt Sanding bucket The machine has low hours and is in good condition. Gjdpfx Agsxai Uuobjbg Additional equipment (can be included at an additional cost): Pinch Compressor Drilled rn Hanger This is a reliable and versatile wheeled machine that is excellent for both small and large jobs. Ready for delivery Own weight: 16930 Total Weight: 16930 CE: Yes Engine hours: 96 Model: M315 Hjulmaskin m/ graveskuffe, rotortilt, pusseskuffe

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 600 mm, feed length Y-axis: 220 mm, feed length Z-axis: 540 mm, feed rate X-axis: 30,000 m/min, feed rate Z-axis: 3,000 m/min, table length: 400 mm, table load: 250 kg, table width: 250 mm, Surface grinder Ziersch - ZT 24 MACH-ID 9344 Make: Ziersch Type: ZT 24 Control: Mitsubishi TOUCH Panel Year: 2010 Sturdy, cast iron execution of all machine components High machine weight for maximum rigidity Preloaded precision linear guideways in the vertical- and cross axis (Bosch Rexroth) for highest accuracy Scraped and turcite coated slideways in the longitudinal axis provide excellent vibration absorption and a high-quality grinding surface pattern. Hydraulic longitudinal motion with return cooling unit to achieve good surfaces Electro-mechanic cross- and vertical motion Measuring systems in vertical axis (Heidenhain) for precise positioning Maintenance-free paper band filtration unit with up to 500 l tank and 2-bar pressure pump for effective cooling and rinsing Integrated rinsing channel Magnetic separator for prefiltration of the paper band filtration unit Infinitely variable grinding spindle motor Machine lamp Table-mounted dressing device for high precision and surface finish Electro-permanent magnetic chuck (SAV) with integrated pole changing unit and traction regulation Partial encapsulation of the machine with sliding door and a service door Effective splash guard and an excellent accessibility Preparation of the machine for installation of a coolant mist exhaust unit Control system features: Very comfortable and easy to operate Z-control Automatic vertical infeed with dressing amount compensation Fully automatic grinding cycle with dressing cycles Easy operation via touchscreen Large and clear colour screen (10.4") Electronic handwheel, usable in vertical- and cross axis Gsdpfx Aox Sw H Eogbjbg X - Travel: 600mm Y - Travel: 220mm Z - Travel: 540mm Table Length: 400mm Table Width: 250mm Table load: 250 Feed rate X-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Grinding stone dimensions:250 x 38 x 50,8mm Power: 3,7kW Speeds: 4500Rpm Cooling system: Yes Feed rate Y-Axis: 30000mm/min. Length: 3050mm Width: 2050mm Height: 2510mm Weight: 2900kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2006, Year 2006 Excellent condition Gbodpjwwk Tvsfx Agbsg Welcome to view prior to prior X-Axis- 450 mm Y-Axis - 300 mm Z-Axis - 350 mm Table Length - 800 mm Table Width - 400 mm Table load - 400 Spindle speeds - 2500 Rpm Feed rate X-Axis - 0-4000 mm/min. Feed rate Y-Axis - 0-4000 mm/min. Feed rate Z-Axis - 0-4000 mm/min. Feeds all 3 directions Heidenhain digital read out Motorised ram adjustment Milling and drilling pinole Removable housing

Condition: excellent (used), Professional outside micrometer from the renowned brand Mahr, designed for precise measurements in industry, workshops, and laboratories. The device features high accuracy and robust construction, while its large LCD display enables quick and convenient readout of results. . Measuring range: 25–50 mm / 1–2” . Resolution: 0.001 mm (1 µm) . Functions: ZERO, ABS, REL, TOL . Protection class: IP65 – dust and splash resistant . Power supply: CR2032 battery (3 V) . Ergonomic, precision design made of hardened steel . Clear LCD display . Catalogue number: 4157042 . Manufacturer: Mahr GmbH – Germany Included: . Mahr Micromar 40 EWR-S digital micrometer . Calibration standard . Adjustment key . Documentation and user manual . Original carrying case Device condition: very good – fully functional and ready for operation. An excellent choice for industrial plants, precision workshops, and measurement laboratories. Gedpfx Agsxl Rf Sebobg

Condition: used, Year of construction: 2023, operating hours: 162 h, Drive: Track Serial number: cat03027kcz60xxxx Please contact ATS Norway for more information Gbodpfsw S Ay Ajx Agbsg Please provide reference number upon request: 21206 Specifications: Model year: 2023 Not certified 162 hours 18.4 kW Weight: 2,800 kg Machine width: 157 cm Rubber tracks Dozer blade Swing boom Tiltrotator Grading bucket Digging bucket Grapple Trenching bucket Air conditioning / AC Radio Ready for delivery Description: For sale: 2023 CAT 302.7 CR excavator equipped with tiltrotator, grading bucket, digging bucket, grapple, and trenching bucket.The machine is well maintained with only 162 hours on the clock. Fully equipped and built for reliability and performance.The cab is spacious and provides excellent visibility, along with great driving comfort.Ideal for smaller jobs and precision work.Ready for immediate delivery. Hours: 162 Own weight: 2800 Width: 157 Kw: 18,4 Model: 302.7 CR gravemaskin m/ rototilt, pusseskuff,graveskuffe,klype og grøfteskuffe

Condition: excellent (used), Year of construction: 2000, Huron MU6 Universal Ram Type Milling Machine Oct 2000 YOM 40 INT Taper Table 2000mm x 450mm Table power feeds & rapids inn all directions Double swivel vertical head X axis travel - 1500mm Y axis travel - 700mm Z axis travel - 550mm DRO Gbedex Ivx Eopfx Agbsg Max spindle speed 2066rpm Interlock spindle guarding Weight 4000kgs Excellent condition

Condition: excellent (used), For sale: High-quality milling head by renowned brand Walter – Xtra-tec® series, designed for precision roughing and semi-finishing of metals. Premium industrial tool, ideal for CNC machining centers and conventional milling machines. • Cutting diameter: Ø65 mm • Model: F4033.B27.080.Z07.06 • Mount: SK40 / ISO40 • System: Xtra-tec® • Number of insert seats: 7 • Superior build quality – Walter German precision • Applications: face milling, machining of steel, cast iron, and alloys • Condition: used, in excellent technical condition, ready for operation The head offers outstanding performance and long service life – perfect for industrial, workshop, and production uses. Gbedpexlgniofx Agbjg

Condition: excellent (used), For sale: professional SK40 tool holders with clamping according to DIN 69871-1 AD/B standard, suitable for CNC machining centres and milling machines. All units come from the dismantling of an industrial facility, are fully functional, precisely balanced, and ready for operation. - Type: SK40 × Ø6 × 80 mm - Standard: DIN 69871-1 AD/B - Max RPM: up to 25,000 rpm (G2.5) - Manufacturer: WNT Gjdpfx Agexgu Tisbebg - Condition: used, very good, ready for immediate use - Some holders are equipped with drills – ideal for immediate deployment Ideal for use in milling centres, CNC machines, tool shops, and manufacturing plants. Excellent build quality ensures high precision and repeatability of machining.

Condition: excellent (used), Professional drill chuck from the renowned brand GEWEFA, made in Germany. Designed for clamping drills with a diameter from Ø2.5 to 16 mm in CNC machines, machining centers, and conventional milling machines. The high-quality construction ensures excellent concentricity, secure tool holding, and long service life even under intensive production work. Type: SK40 × Ø2.5–16. Catalogue number: 28.05.046.002. Taper: SK40 DIN 69871. Manufacturer: GEWEFA – Made in Germany. Year of manufacture: 2007. Condition: very good, used. An ideal choice for professional industrial applications and metalworking workshops specializing in precision machining. Price is per unit. Gedpoxizauefx Agbjbg

Condition: excellent (used), For sale: Professional WNT tool holder SK40 Ø12x80 capable of operation up to 25,000 rpm (balanced to G2.5). The holder comes complete with a ventilated drill – ideal for machining with internal cooling. Excellent condition, the tool has been tested and is ready for use. Top-class equipment, designed for precision machining on CNC centers. Gbjdpfx Aew Rrw Uogbeg

Condition: excellent (used), For sale: robust mounting plate/machine table with T-slots. Constructed from thick-walled steel, painted blue. Excellent base for installing large components, fixtures, or for measuring and machining applications. • Dimensions: 2570 x 770 x 200 mm • Surface with T-slots • Precisely machined top section • Weight: 900 kg Gbsdpfew Rdtusx Agbsg • Can be transported or loaded by forklift

Condition: excellent (used), For sale: Robust bookbinding press from the Swiss brand Jos. Hunkeler AG, type FNP, equipped with a Mecman pneumatic cylinder Ø160 mm, stroke 50 mm, working pressure up to 8 bar. • Manufactured in Switzerland – top-quality workmanship • Cylinder: MECMAN (Sweden), Ø160 mm, 50 mm stroke, max 8 bar • Flat working plate, ideal for bookbinding, gluing, and laminating tasks • Stable, heavy construction on castors • Integrated pressure gauge for monitoring • Lower cabinet with control panel and pneumatic supply • Serial number: 13109 The machine is in perfect working order, excellent for production, manual pressing of covers, or stationery equipment. Gbjdpfx Aeud Avregbjg Visual and technical condition – very good. Ready for operation.