Used Blown Film for sale (1,443)

Year of construction: 2018, condition: like new (used), functionality: fully functional, MACCHI COEXTRUSION LINE FOR 7-LAYER EVOH BLOWN FILM Complete line for the production of 7-layer EVOH blown film 4 Macchi extruders with 65 mm screw diameter Djdsy Nk Haepfx Albjwb 3 Macchi extruders with 55 mm screw diameter Innoplast gravimetric dosing units 7-layer die head, 450 mm diameter with IBC, 2.4 mm GAP K-Design cooling ring Double thickness control IR+XRay Maximum width 2400 mm Calibration basket Rotating haul-off Cason corona treater Macchi BO-Plus double back-to-back automatic winder Web guide Year 2018

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: TZ-JRT-30B-2800, Automatic log-cutting machine for toilet paper and hand towel cutting Fully automatic operation with advanced PLC control, LCD touchscreen, and servo motor. The machine is designed to minimize manual intervention, reduce labour requirements, and improve operator safety. The main operating parameters are set directly via the touchscreen PLC. The machine can be integrated with a converting and rewinding line for more efficient production. Designed for long-term industrial operation. Major components are imported, with the remaining components sourced from quality Chinese manufacturers. Technical Specifications Cutting diameter: 130–250 mm, adjustable via PLC Cutting length:50–380 mm, adjustable via PLC Maximum log length: 2,750 mm, adjustable via PLC Log lengths: Adjustable via PLC Cutting speed: Manually adjusted according to log diameter, thickness and cutting length Maximum stable operation speed: Up to 20 cuts/min for logs below 210 mm diameter and cutting lengths of 50–220 mm For cutting lengths above 220 mm: Automatic speed adjustment to approximately 10 cuts/min Automatic blade sharpening Automatic log loading/pick-up table Log storage rack with automatic feeding Automatic waste/reject removal via mechanical pusher (if using the push hand) Electrical connection: 3 × 400 V, 40 A Compressed air: 0.6 MPa Machine dimensions: 3,500 × 2,500 × 2,000 mm Weight: Approximately 3,000 kg (2 parts, cutter and the mechanical pusher) Country of manufacture: China Machine Condition Dsdpfx Aljzxnmyjbjwb The machine has been in operation at the factory and has been running without any major issues. Installation year 2020, running conditions about 7hrs /one shift. The following maintenance/repairs have been carried out: * Upper drive bearings replaced (2025) * Lower drive bearings replaced (2026) * Drive belts replaced (2026) * Damaged motion-control wiring repaired/replaced (2026) * Every 3-month inspection * Every 6-month lubrication of moving parts The machine is currently dismantled and stored in a dry warehouse. It can be inspected in its dismantled condition. Spare Parts Included Band saw blades: 4,400 × 70 × 0.65 mm price €105/pc, 9 unused blades, 1 sharpened and ready-to-work condition blade, 1 sharpened and ready-to-work blade (width narrow, still can cut most of the articles) Diamond grinding wheels: €80/pc, 1 spare New dust collector/vacuum system: €1,100 - purchased new but never installed (2-way suction and 1-way blown-in, with collection bin, direct attachment to the cutter) Other Information * Made in China - technical support within 24 hrs, spare parts in about 2 weeks. * Automatic operation * PLC + LCD touchscreen control (screen has original protection film still attached) * Servo-driven system * Suitable for toilet paper and hand towel logs * Suitable for integration into a converting/rewinding production line * Machine dismantled for storage Export outside the Baltic States Inspection possible by prior arrangement. Videos: youtu.be/8-xRCmvARYM youtube.com/shorts/vU4EunMEQt4 youtube.com/shorts/wwuV2Gp30AY youtube.com/shorts/WZjjokJjgZY

Year of construction: 2013, condition: ready for operation (used), Mariani Shrink film wrapper Model: TRM 700-LF-I YOM 2013 Including in/outfeed conveyor system Working width: 700mm Cardboard Trays – Cases with protective shrinked film Portion packs : 3 x 8 – 3 x 9 – 3 x 10 Family packs : 2 x 6 – 3 x 4 Output: Max 25 trays per min, varying according to the format required Dsdoyilyqepfx Albewb Dimensions machine (LxWxH): 5000x1400x2100mm

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Dedszylxiopfx Albjwb Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: used, - 3-layer blown film line on rotary platform - Product-specific modifications and adjustments are possible (subject to charge) - Spare screw, spare cylinder and various spare parts are additionally available for this line Freight terms: ex location Delivery time: by arrangement Dwsdpfx Alsxq Hcdebsb Payment terms: 100% in advance before machine takeover, strictly net

Condition: excellent (used), Year of construction: 2021, operating hours: 240 h, functionality: fully functional, operating pressure: 6 bar, We used the machine for PVC tarpaulins. The company is closing down. Technical details can be found in the photo. It has been running without issues, and no maintenance has been required to date, although this can certainly be clarified with the manufacturer in Italy. The machine functions perfectly; there is no overheating. A video call is possible. Three electrodes are included: Djdpszy E D Esfx Albswb one fixed electrode, 100 cm x 20 cm one fixed electrode, 50 cm x 2 cm one flexible electrode, 100 cm x 2 cm 400 L/minute 200/300 L of air Working pressure: 6 bar, max. 8 bar.

Year of construction: 2012, condition: used, This Macchi 3-layer blown film co-extrusion line is designed for the production of high-quality polyethylene films with outputs of up to 800 kg/h. The line processes LDPE, LLDPE, MLDPE, and HDPE and is suitable for manufacturing collation shrink film, gusseted shrouds, stretch hood film, tubing, and sheeting. Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Head: 3-layer blown film die head TE5303-IBC-350/500 Die diameter: 350 and 400 mm IBC Die gap: 1.8 mm Output: Up to 800 kg/hour, depending on the material formulation Air ring: Dual-flow air ring, carbon fiber Take-off: Take-off unit, 2400 mm wide Oscillating nip rollers Motorized side gusseting Rewinder: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reel diameter up to 800 mm Winding width 2350 mm Dedpfx Aezkru Ejlbowb Accessories: Tower Web guide, E&L Gravimetric weight control system, Piovan/Doteco Component blender, Shini Dosing units, Doteco Automatic thickness control, Kundig K-Design profile gauge control system Calibrating basket Corona treater, Martignoni Air shafts, 8 pcs

Condition: used, No. 10025 Cutting mill Alpine RO 40/63 Used According to our customer, the machine is fully functional and can be inspected on site Motor power 30 kW Rotor diameter 630 mm Rotor width 400 mm Rotor knives 5 rows with 3 knives each Stator knives 1 row with 3 knives to the front and 2 rows with 3 knives to the rear Maximum permissible speed of the drive shafts 560 rpm The cutting mill Alpine RO 40/63 with patented cross-shear rotor guarantees optimum material distribution with maximum cutting performance. The hinged screen holder allows easy removal of the screen and perfect access for cleaning the machine and replacing the blades. Ideal for industries such as recycling (for blown film, cables, plastics, etc.) and food (tea, spices, dried vegetables, etc.). Sale on behalf of customer, ex location near 72072 Tübingen, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Dwsdpfx Asxph Avolbsb Terms of delivery: ex location

Year of construction: 1996, condition: excellent (used), film width: 1,300 mm, Used single-layer blown film extruder for sale in excellent condition, featuring a 150 mm die diameter and a production capacity of up to 100 kg/h. Model: Queens EP-65N Processable materials: LLDPE/LDPE/MDPE/HDPE/other blends. Screw diameter: 65 mm Head: • Blown film die head Dwsdpsxrb Hmsfx Albjb • Die diameter: 150 mm Die gap: 1.2 mm Output: Up to 100 kg/h, depending on material composition • Maximum speed: 120 m/min • Winding width: 1300 mm - Flying knife roll slitting Accessories included: • Tower • Gravimetric weight control system • Masterbatch dosing unit • Calibration cage The machine can be inspected in operation. Offered with spare parts.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: M 09.10.288, product width (max.): 700 mm, product length (min.): 120 mm, input voltage: 400 V, working height: 850 mm, input frequency: 50 Hz, Equipment: documentation/manual, Kallfass Universa 700 – Fully-Automatic Side Sealer + KALLFASS Schrinktunnel COMPAKT650 D Industrial packaging machine for shrink-wrapping larger products such as picture frames, furniture, insulation material and similar goods. Manufactured by Kallfass Verpackungsmaschinen GmbH (Germany), CE certified. Key specs: Max. production speed: up to 65 packs/min Cross seal bar width: 750 mm Dwsdpjzwld Hjfx Albsb Max. sealing frame height clearance: 300 mm Min. product length: 120 mm Film: centre-folded or flat, 12–80 micron; reel diameter up to 400 mm, width up to 900 mm Permanently heated seal bar with exchangeable sealing ledge, maintenance-free, PLC temperature control Siemens S7 PLC with colour touchscreen operator interface (multi-language) Power: 400V, 50Hz, 3-phase, 3.5 kVA Dimensions: approx. 2500 x 1400 x 2100 mm Colour: Kallfass Anthracite Complete with original technical documentation and CE declaration of conformity.

Condition: used, Year of construction: 2002, Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  - Line capacity: - 12,000 bph at 0.5 L - 9,000 bph at 1.0 L - 8,000 bph at 1.5 L - 6,000 bph at 2.0 L - Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L - Neck finish: PCO 1810 - Max. bottle diameter: 106 mm - Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water - Labelling: Wrap-around, pre-cut paper labels, hot-melt - Secondary packaging: Film only (4×3 and 3×2) - PLC: Siemens S7-300 - Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Delivery - Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit - Rinser | Krones | Variojet | 2002 | Rotary - Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer - Labeller | Krones | SV 360-10-113 | 2002 | Rotary - Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt - Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats Dsdpexhf Hiefx Albowb - Palletizer | Krones | Pressant Compact 1N | 2002 - Stretch wrapper | Robopac | Rotoplat | 2002 - Air conveyor | Krones | Airco S | 2002 | For blown PET bottles - Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles - Pack conveyor | Krones | Multico S | 2002 | For product packs - Pallet conveyor | Krones | — | 2002 | For pallet transport - Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold

Condition: used, Year of construction: 2023, Overview This Robopac Genesis Futura HS pallet winder was built in 2023. It has under 500 operating hours - technically close to new. The rotating ring carries the pre-stretch carriage around the stationary pallet for high throughput without moving the load (see Capacity below). Delivered as a stand-alone unit with integrated roller conveyor, prepared for line integration over Ethernet TCP/IP. Technical data - Manufacturer: Robopac - Model: Genesis Futura HS - Year of manufacture: 2023 - Machine type: automatic rotating-ring stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: up to 92 pallets/h (13 wraps, H 1,000 mm), 77 pallets/h (17 wraps, H 1,600 mm), 70 pallets/h (19 wraps, H 2,000 mm) - Pallet size: 800 x 1,200 mm - Load height: 1,000 - 2,000 mm (incl. pallet) - Load weight: 100 - 1,200 kg - Conveyor height: approx. 550 mm; speed 15 m/min - Machine height: approx. 4,862 mm; hall height from 7,000 mm - Pre-stretch: SCV-B carriage, electronically adjustable 150 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. diameter 250 mm, core 76 mm, max. weight 20 kg - Control: Siemens SIMATIC S7-1200 PLC, Siemens TP700 7" colour touch panel - Wrapping programs: 15 (expandable to 64), 12 steps/recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry, oil-free Dwedszzz R Dopfx Albeb - Documentation and HMI languages: German / English Equipment - High-speed rotating ring: power transfer to the pre-stretch carriage via sliding contacts, Wi-Fi commands - Integrated roller conveyor with pneumatic pallet lifting station (SMC PL-D) - Automatic film clamping, cutting and wide-band sealing unit - Fixed vertical hold-down (top press unit) stabilises the load during wrapping - Roping device gathers the film web from below - Photocell for automatic pallet-height reading, plus a pre-scan photocell with 3,800 mm reflector mast - Inverter-controlled IE3 motors, SEW geared, IP55, FESTO pneumatic components, SICK photocells - Siemens Scalance S615 VPN / firewall router and Scalance XB005 Ethernet switch, TCP/IP link to up-/downstream machines - Safety: Reer Safegate SMPO 1803 light curtain, fenced enclosure, dynamic fall protection on the ring - Operator panel separate from the main switch cabinet, plus remote control unit with emergency stop - R-Connect remote monitoring hardware: cloud portal for production data and teleservice - TPM package (centralised lubrication points, maintenance intervals on display), integrated HMI troubleshooting - Complete documentation on USB stick and in print: operating / maintenance manual, wiring / pneumatic diagrams, spare parts catalogue, layout Condition Used - almost as new, no visible production wear. Still installed and under power; inspection in operation on request. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Technical data - Manufacturer: Robopac - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) Dwedpfjzzz Rdjx Albjb - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm, centred on the conveyor - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed Dsdjzzz N Hopfx Albjwb - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Year of construction: 2005, condition: good (used), Finnish-made, automatic film wrapping machine with infeed and outfeed conveyors, and strapping for securing the package to a wooden pallet. Dwodpfsy Uagmsx Albeb

Year of construction: 2023, condition: good (used), functionality: fully functional, 2023 Model Tekin Machine Brand 2200 Roller-Type Automatic Winding 80x100 ABA Polyethylene Film Machine, Line A and Line B (including all necessary components and accessories). Djdpfx Alezdy Slobewb It is currently installed and can be inspected in Kartal / Istanbul.

Condition: used, Year of construction: 2017, Year: 2017 Dsdpfx Aozzzimelbowb Condition: very good Counter reading: approx. 2.9 million sheets Configuration: - Heidelberg suction feeder head - Pneumatic pressure system - Pneumatic film shaft with micro-adjustment - Teflon-coated non-stick roller - Automatic sheet separation - Jogger delivery unit Technical specifications: - Maximum laminating speed: 20 m/min - Sheet feeding: Automatic - Feeding system: Heidelberg suction feeder - Feeder pile capacity: 54 cm - Sheet overlap adjustment: Automatic, PLC-controlled - Overlap accuracy: ±2 mm - Laminated sheet separation: Automatic, by cycling rollers - Paper weight: 115–500 gsm - Main roller pressure: Pneumatic - External compressor: 150 l/min, 6–8 bar - Minimum sheet size (W × L): 20 × 30 cm - Maximum sheet size (W × L): 53 × 74 cm - Maximum output: 1,650 B2 sheets/hour - Roller warm-up time: 8 min - Temperature range: 80–140 °C - Power consumption: 6,000 W - Machine footprint incl. jogger (W × L): 120 × 270 cm - Weight: 500 kg - Stacker capacity: 70 cm

Condition: used, Year of construction: 2000, Format: 370 x 520 mm Equipment: Alcolor Automatic film dampening Dodpszzzt Sefx Albowb Autoplate: semi-automatic plate change system All manuals, tools, accessories Technical details: Maximum sheet size: 370 x 520 m Paper thickness range: 0,03 - 0,5 mm - Max. speed Plusversion

Condition: used, Year of construction: 2006, functionality: fully functional, Film cutting machine, robust model FSM L15 Year of manufacture: 2006 Location: Bad Tölz Inspection is welcome. We have other used machines available. Please feel free to contact us. Dsdpfx Aozudzfelbewb

Year of construction: 2010, condition: excellent (used), Automatic pallet wrapper with film pre-stretching Dodpeychv Djfx Albjwb Inventory no. 3928 Manufacturer: ProtoWraptor Type: PLUS - IDP * Turntable positioning via fixed stop * Number of top and bottom wraps * Turntable diameter: 1650 mm !!!! * Max. wrapping height: approx. 2400 mm !! * Own weight: approx. 450 kg * Suitable for Euro pallets and block pallets!!! * Ramp!!! * In very good condition.

Condition: used, Second-hand machine Features and technical specifications: - Film material: LLDPE - Film width 500 m - Max. roller diameter 250 mm - max. film thickness 35 µm Dwedpfx Alezlbt Hebjb - Roller core diameter 76 mm - Max. pallet length 1,675 mm - Max. pallet width 1,675 mm - Max. pallet height 2,200 mm - Max. pallet weight 1,500 kg - with access ramp - Dimensions approx. 3000 x 2000 x 3200 mm - Weight approx. 750 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: ready for operation (used), functionality: fully functional, overall weight: 28 kg, Description Tabletop banding machine (bundling machine) Band/roll width: 30 mm Material: Paper from 70 g/m² or film from 80 µ (duplex film) Closure: Heat sealing Frame size: 240 × 170 mm (W x H) Product size: Min.: 30 × 5 mm / Max.: 235 × 170 mm Output: approx. 26 cycles per minute Tension force: continuously adjustable (from soft to very tight) Power supply: 230 V / 50 Hz Dedpfx Alozz Alvobswb Machine dimensions: approx. 425 × 400 × 287 mm (W x H x D) Weight: approx. 28 kg

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Manufacturer: WEILEDER Model: WTK -40/55 PT Category: Packaging machine Year of manufacture: 2018 Location: Ex site Availability: Short-term Operational condition: Dismantled/in storage Technical Data Passage width: 400 mm Passage height: 200 mm Workpiece length max.: 550 mm Film width max.: 600 mm Number of rollers bottom: 1 Total units: 1 Longitudinal units: 1 Magazine slots: 1 Dodpsyatgcjfx Albowb Packaging stations: 1 Conveyor technology: Stepless feed Shrink film: Longitudinal film station Discharge: Automatic version Mobile device closure Sealing units Conformity marking: CE marking Total connected load: 9 kW Space requirement length: 2.57 m Space requirement width: 0.87 m Space requirement height: 1.6 m

Year of construction: 2017, condition: used, functionality: unexamined, Leased vehicle returned Dwedpfxszwck Do Albob Approximate transport dimensions: 50x175x96 cm, approx. 30 kg Serial number: 41049060917 Stock ID: 13500329

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, Coating, laminating – additional unwinder for lamination Corona treatment – during coating of film with water-based dispersions Working width – 1700 mm Coating speed – 0–100 m/min Dwsdpfxoxwaikj Albjb Material in rolls Raw material – paper (50–300 g/m²), film (0.023–0.10 mm) Substances – solvent-based adhesive, water-based adhesive Type of coating – coating head: Mayer rod, anilox roller, slot die roller Dryer – length 18 m, 7 drying sections, temperature 30°C–170°C, gas drying (blower) Roll diameter – max 1400 mm Machine includes hot air generator Detailed description available on request.