Used Shrink Film for sale (1,642)

Year of construction: 2013, condition: ready for operation (used), Mariani Shrink film wrapper Pjdoyilyqspfx Ahvopp Model: TRM 700-LF-I YOM 2013 Including in/outfeed conveyor system Working width: 700mm Cardboard Trays – Cases with protective shrinked film Portion packs : 3 x 8 – 3 x 9 – 3 x 10 Family packs : 2 x 6 – 3 x 4 Output: Max 25 trays per min, varying according to the format required Dimensions machine (LxWxH): 5000x1400x2100mm

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 50003, input voltage: 380 V, input current: 53 A, The line was used very little, 2-3 hours per shift. It had been idle for the last year due to a change in the packaging process. Ppsdpexp D D Nofx Ahvsp The decision was made to sell it. If you have any questions, I will be happy to answer them.

Condition: like new (used), Year of construction: 2018, Shrink Tunnel, Film Shrink Tunnel Manufacturer: Diez Model: HTC5030D Podex Avxrjpfx Ahvjpp Year of manufacture: 2018 No operating hours! Pass-through width: approx. 50 cm Pass-through height: approx. 30 cm Overall length: approx. 220 cm 21225

Condition: ready for operation (used), functionality: fully functional, product height (max.): 400 mm, product width (max.): 450 mm, Shrink film packaging machine Manufacturer: Kallfass Model: Pack JET 1000/450 SIM + Universal 450 N CE marking Packaging line for transport packaging / film wrapping of, among other things, profiled wood, mouldings, etc. The system comes from a flooring and panel manufacturing plant. Comprises: - Infeed roller conveyors - Film wrapping/sealing machine - Shrink tunnel Ppodpfx Ajyinzgohvjp - Outfeed roller conveyors Passage width approx. 450 mm Passage height approx. 400 mm Feed rate steplessly adjustable, max. approx. 20 m/min. Compressed air: 6 bar Includes several rolls of packaging film, as available

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt Ppsdpskn Rz Hjfx Ahvsp throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: good (used), Passage width: 370x230mm Belt length: 1200 mm Pedpfxjukd Dlo Ahvjpp

Condition: excellent (used), Year of construction: 2015, Robopac Athena Combi 5545 automatic shrink film wrapping machine The Athena Combi automatic shrink wrapping machine is based on technologies of high-end industrial machines. Due to continuous product development and research, Athena Combi provides great performance, versatility, and user-friendly interface. Because of the outstanding adaptability and accuracy of the machine, makes it possible to use high range of materials for shrink filming. The equipment meets the most stringent safety standards as well. Podpov D Ezijfx Ahvopp Manufacturer: Robopac Model: Athena Combi 5545 Year: 2015 Sealing bar dimensions LxW: 550x450 mm Max. product height: 120 mm Min. Product dimensions LxWxH: 50x20x20 mm Capacity: 30-35 packages/minute Max. product weight: 120 kg. Power: 400V / 12kW / 50-60Hz Machine Dimensions LxWxH: 2.700x1.200x1.500 mm Machine Weight: 600 kg.

Condition: new, functionality: fully functional, Year of construction: 2022, Complete extrusion line for the production of PVC shrink film, specifically designed for sleeve-label applications. Built in 2022 by RL Plastproject (Italy), the machine is brand new, never installed, and immediately available. Technical Specifications: Product: PVC shrink film for sleeves Material: Rigid PVC dry blend Extruder: Single-screw with venting and gravimetric dosing Output: approx. 180–200 kg/h Film thickness: 40–80 micron Usable film width: up to 620 mm Die width: 900 mm Psdjw Ahfgjpfx Ahvepp Line speed: up to 60 m/min (depending on film) Cooling: Calender with chill roll Orientation: Transverse shrink forming unit Corona treater: Integrated Winding: Dual-position slitter-rewinder Control system: Siemens PLC with touchscreen HMI Installed power: ~220 kW (to be confirmed) Air requirement: 6 bar Footprint: approx. 25 x 6 meters

Condition: good (used), Year of construction: 2015, operating hours: 5,842 h, functionality: fully functional, machine/vehicle number: 2/362594/15, input voltage: 400 V, compressed air connection: 6 bar, input current: 25 A, input frequency: 50 Hz, nominal power: 13 kW (17.68 HP), Equipment: documentation/manual, This is a "Meurer Filmline CMB 600 machine", which is no longer in use due to a change in the product range. Shrink film packaging machine with shrink tunnel FILMline CMB 600 The machine is immediately available, has no defects, and is in excellent condition. The current operating hours are 5,842 hours. The dimensions of the machine can be found in the attached document. The machine has been serviced regularly and can be inspected if required. In addition, all original operation manuals (in German and English) as well as electrical diagrams are available in duplicate as folders. Banding performance: 35 products/min Bundle capacity range: 1x5 / 1x10 Product dimensions X/Y/Z min./max.: 120mm x 120mm x 70mm / 265mm x 125mm x 38mm Bundle dimensions X/Y/Z min./max.: 228mm x 265mm x 125mm / 350mm x 120mm x 120mm Machine dimensions X/Y: approx. 3300mm / 3020mm A video of the running production can be provided on request. Ppodpewxtktsfx Ahvep

Condition: used, - Dimensions (L x l x H) : 750 x 1520 x 1430 mm - Année : 2006 - -Numéro de série : 1992 -Hauteur d'alimentation depuis le sol : 830 mm - Cadre de scellage - Bras longitudinal : 390 mm - Cadre de scellage - Bras transversal : 490 mm - Niveau sonore : 60 dB - Consommation électrique en veille (mode éco) : 0,3 kW/h - Consommation électrique pour 150 paquets/heure : 1,5 kW/h - Hauteur maximale des consommables : 180 mm - Poids maximal des consommables : 10 kg - Diamètre maximal des bobines de consommables : 260 mm - Largeur maximale des bobines de consommables : 550 mm - Films compatibles avec les consommables : PVC, polyoléfine - Tension : 230 V AVANTAGES - 2 modes de fonctionnement disponibles en standard - Vitesse variable : avant/arrière ou continue - Éléments chauffants blindés - Disposés en cercle autour du ventilateur pour un retrait uniforme - Ventilation puissante et équilibrée - Assure un transfert de chaleur efficace vers le film, permettant un retrait de tous les films à une température plus basse et avec un temps d'exposition plus court - Réglage simultané - Réglage simultané de la hauteur de la table de déchargement et du convoyeur tunnel en fonction de la taille du paquet : aucune différence de hauteur, meilleur retrait et économies d'énergie - Silencieux - Moteur électrique temporisé de dernière génération à faible niveau sonore - Pjdpoxqfy Uofx Ahvopp ÉQUIPEMENT - Le paquet est placé sur une plaque de transfert fixe - 2 électroaimants maintiennent le cadre pendant l'opération de scellage - À la fin du scellage, l'opérateur pousse le paquet sur le convoyeur tunnel, qui se déplace à vitesse variable - Le paquet traverse le tunnel jusqu'à la sortie - Caractéristiques conçues pour le confort de l'opérateur et l'ergonomie du poste de travail - Profondeur du support de film et table d'alimentation réglables - 2 modes de fonctionnement disponibles en standard : AVANT/ARRIÈRE ou CONTINU à VITESSE VARIABLE - Réglage de la hauteur du tunnel Convoyeur à bande - Bac de récupération des films usagés - Unité mobile sur roulettes - Dispositif de scellage à chaleur permanente et impulsion réglable - Thermostat électronique contrôlant la température du tunnel à +/- 2 °C - Chauffage et ventilation temporisés du tunnel - Bande transporteuse en maille téflonnée avec guide, maille 5 x 5 mm, vitesse réglable par variateur de fréquence - Hauteur du convoyeur à bande réglable par volant pour un retrait optimal (sans différence de hauteur) Cette annonce a été traduite automatiquement. Des erreurs de traduction sont possibles.

Condition: new, Year of construction: 2025, Fully automatic and efficient packaging process realizable by AMTEC’s speed shrink Complete System 35M. That system includes: Shrink Wrapper speed shrink 35M (vertical), SHRINKtunnel-POF-M (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: M-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute; packing sizes: (L + H) max. 500mm provided that H < 180mm and (W + H) max. 400mm provided that H < 180mm; length of sealing blades: horizontal = 623mm, vertical = 550mm; power: 220V/2.8kW; machine dimensions: L1850xW1350xH1300mm; weight: 800kg. - Specifications of the shrink tunnel: high speed shrinking with 0-20m/min for POF (Polyolefin) film; max. packaging size: W400xH250; tunnel size: L1500xW500xH300mm; power: 380V, max. 16kW; machine dimensions: L1800xW990xH1300mm; weight: 650kg. Dimensions of infeed and outfeed conveyors: L1000mmxW450mm each. Total dimensions LxWxH: approx. 5650x1350x1300mm. Pedpfxev Nl A Re Ahvepp Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic and efficient packaging process realizable by AMTEC’s speed shrink Complete System 35L. That system includes: Shrink Wrapper speed shrink 35L (vertical), SHRINKtunnel-POF-L (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: L-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute; packing sizes: (L + H) max. 600mm provided that H < 180mm and (W + H) max. 500mm provided that H < 180mm; length of sealing blades: horizontal = 703mm, vertical = 550mm; power: 220V/3.2kW; machine dimensions: L2015xW1470xH1300mm; weight: 850kg. Specifications of the shrink tunnel: high speed shrinking with 0-20 m/min for POF (Polyolefin) film; max. packaging size: W550xH250; tunnel size: L1500xW650xH300mm; power: 380V, max. 18kW; machine dimensions: L1800xW1140xH1300mm; weight: 700kg. Dimensions of infeed and outfeed conveyors: L1000mmxW600mm each. Total dimensions LxWxH: approx. 5815x1470x1300mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Ppsdpfev Nl Dbex Ahvep

Condition: new, Year of construction: 2025, Fully automatic and efficient packaging process realizable by AMTEC’s speed shrink Complete System 35XL. That system includes: Shrink Wrapper speed shrink 35XL (vertical), SHRINKtunnel-POF-XL (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: XL-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute; packing sizes: (L + H) max. 800mm provided that H < 180mm and (W + H) max. 650mm provided that H < 180mm; max. length of sealing blades: horizontal = 903mm, vertical = 750mm; power: 220V/3.5kW; machine dimensions: L2430xW1550xH1300mm; weight: 930kg. Specifications of the shrink tunnel: high speed shrinking with 0-20 m/min for POF (Polyolefin) film; max. packaging size: W700xH250; tunnel size: L1500xW800xH300mm; power: 380V, max. 20kW; machine dimensions: L1800xW1290xH1300mm; weight: 750kg. Dimensions of infeed and outfeed conveyors: L1000mmxW800mm each. Total dimensions LxWxH: approx. 6230x1550x1300mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Ppedpov Nl Dhjfx Ahvjp

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, table width: 1,700 mm, table length: 2,000 mm, passage height: 250 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site. Pedpfx Ajvvlyiehvspp

Year of construction: 2012, condition: good (used), Shrink packaging FL5545TB L sealer and shrink tunnel Ppodpfjpm D T Usx Ahvop Serial: 872 2012, L sealer on conveyor, sealing bars 550mm x 450mm, into shrink tunnel, aperture 400mm x 220mm, variable speed conveyor and adjustable temperature controls, mobile, 3Ph

Condition: ready for operation (used), Manufacturer: Beck -external sizes: 1700x1010x1400mm -Permeable cross section: 540x240mm Ppsdpeu Nuyisfx Ahvjp -The temperature range: 0-400 °C

Condition: excellent (used), Year of construction: 2004, Machine model GS501 / 3 Bottle specification: Ø 37 mm, H 85 mm, V 60 ml Hourly production: 24,000 b / h Weight: 2,200 kg Flat height of work: 1,000 ± 50 mm Electric consumption: 4.0 kW Air consumption: 200 lt / min Air pressure: 4 bar Machine model STEAM JET 2 Weight: 800 kg Flat height of work: 1,000 ± 50 mm Electric consumption: 0.5 kW Ppjdpfog D Ri Aox Ahvep Air consumption: 80 lt / min Steam pressure: 7 bar Steam consumption: 150 kg / h Software backup from the SIEMENS PLC is available! Machine is ready to load.

Condition: good (used), Year of construction: 2010, Secomak Shrink tunnel Serial: 6905 Podpeyw S Tdefx Ahvjpp 2010, Stainless shrink tunnel, adjustable temp controls, max product 160mm w x 360mm h, 3Ph

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, Used machine Ppjdpfeyw Rn Tex Ahvsp Manufacturer: Kallfass GmbH Model: Fully Automatic Side Sealing Machine Universa 500 Year of manufacture: 2016 Dimensions: approx. 2150 x 1800 x 1550 mm (L x W x H) Weight: approx. 1050 kg Transverse sealing bar: 500 mm Film: semi-tubular film, approx. 12 - 80 µm Max. film roll outer diameter: 400 mm Max. film roll width: 600 mm Min. product length: 80 mm Passage height: 200 mm Working height: 780 - 930 mm Power connection: 400 V three-phase, 50 Hz with protective earth Rated power: 3.5 kVA Rated current: 5.1 A Fully automatic tubular bag machine for packaging products—regardless of their length—in full wrap and without film overlap. Product feed is via a conveyor belt with simultaneous wrapping in a semi-tubular film using a forming shoulder. Product indexing is controlled by a photoelectric sensor. The infeed conveyor can be easily adjusted for different product widths. Longitudinal sealing is achieved by a continuous side sealing unit. The height of the forming shoulder and the sealing units can be adjusted manually. Manufacturer: Kallfass GmbH Model: Shrink Tunnel Compact 650 S Year of manufacture: 2016 Dimensions: approx. 1850 x 1400 x 1450 mm (L x W x H) Weight: approx. net 580 kg / gross 630 kg Technical Data: Tunnel passage width: 650 mm Tunnel passage height: 200 mm fixed Length of heated tunnel hood: 1200 mm Working height: 800 - 900 mm Power connection: 400 V three-phase Energy consumption: approx. 6 kWh Rated current at 400 V: 21.0 A in standalone operation Compact and cost-effective shrink tunnel featuring a patented ring nozzle heating system with highly effective air volume control. Equipped with a steplessly adjustable plastic modular belt. This tunnel is particularly suitable for shrinking small to medium-sized products at medium output rates. Offer validity: 30 days, subject to prior sale Function guarantee, no warranty

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Manufacturer: Kallfass GmbH Model: Shrink Tunnel Universal 950 HV Year of manufacture: 2007 Dimensions: approx. 2540 x 1655 x 1600 mm (L x W x H) Weight: approx. net 750 kg / gross 820 kg Technical data: Tunnel passage width: 900 mm Tunnel passage height: 500 mm Length of heated tunnel hood: 1700 mm Length of additional insulation hood: 2200 mm Tunnel discharge, extended: approx. 600 mm Ppsdpfxjyw Rm Aj Ahvep Working height: 800 - 900 mm Power supply: 400 V three-phase Rated power: 39 kW Rated current at 400 V: 56 A in single operation Universally applicable, high-performance shrink tunnel with laterally adjustable air flaps and outlet openings, adjustable from the outside at the bottom, for precise control of hot air flow, ensuring optimal shrink results even with products of challenging shapes. The recirculation system, the tunnel hood with an additional dual-chamber system, and significantly increased overall insulation provide energy-efficient operation. Equipped with rod chain conveyor, infinitely variable speed control. Functional guarantee, no warranty. Offer valid for 30 days, subject to prior sale. Please note that all machines are delivered without power cables.

Condition: excellent (used), functionality: fully functional, total length: 700 mm, total height: 380 mm, total width: 1,100 mm, type of input current: AC, product height (max.): 220 mm, input voltage: 230 V, width of welding knife: 350 mm, overall weight: 49 kg, Packaging machine Minipack FM-75N Pjdpfx Asyak Rrshvspp Chamber shrink wrap machine Minipack with stand Output up to 250 cycles/h Max. film width: 350 mm Connection: 230 V Used machine We have more machines in stock!

Condition: used, Year of construction: 2009, operating hours: 20,000 h, machine/vehicle number: FA47, Used shrink wrapper SMI SK 450FTechnical Specifications & Performance DataThe SMI SK 450F is a second hand shrink wrapper engineered for high-speed industrial packaging in beverage production and related sectors. This model is well suited to operate downstream of rinsing, filling, capping, and labeling blocks within a used bottling line, delivering stable, brandable bundles for transport and retail.Manufacturer / Model: SMI SK 450FYear: 2009Category: Shrink Wrapper (film application with shrink tunnel)Production speed: up to 28,000 bottles/hour (format dependent)Bundling rate: up to 45 bundles/minute (collation dependent)Operating type: Automatic, continuous-duty shrink wrappingInfeed configuration: Straight inline entry for high-speed linesFilm handling: Works with printed film (print-mark registration) and neutral filmPackaging styles: Film-only and tray+film configurations (subject to setup)Typical collations: 4×3 0.33 L, 3×2 0.33 L, 4×3 0.50 L, 3×2 1.5 L, 2×2 1.5 L, 3×2 1.5 L, 3×2 2.0 L, 2×2 2.0 LContainer materials: PET and glass bottles, aluminum cansProduct types: Water, juice, beer, wine, carbonated soft drinks, energy drinks, and moreTechnical measurements: Dimensions/weights available in manualsAdvanced Automation & Control SystemsDesigned for demanding beverage production, the SK 450F provides robust automation to maintain output and pack quality at speed.Operator-friendly HMI for recipe selection, format parameters, and diagnosticsAutomatic film unwinding with tension control for stable wrapping of PET, glass, and cansPrint-mark sensor for precise registration when running printed filmShrink tunnel with zoned temperature control for consistent, wrinkle-free bundlesIntegrated safety interlocks, emergency stops, and safety guards includedElectrical specifications and wiring diagrams available in the manualsProduction Line Integration CapabilitiesThis shrink wrapper integrates seamlessly into a used bottling line alongside upstream rinsing, filling, capping, and labeling systems, and downstream conveying, case handling, and palletizing.Inline interface with conveyors, accumulation tables, and inspection systemsQuick format change with recipe-based adjustments for varied collationsCompatible with multi-product schedules across water, juice, beer, wine, and mixed SKUsSynchronization options for line speed following and start/stop handshakesMachine Condition & Maintenance HistoryCondition: IN STORAGE, second hand unit from 2009Safety features included as part of the delivered scopeManuals available for operation, maintenance, and electrical referencesGener... Ppsdpoyhbzwsfx Ahvjp

Condition: used, Year of construction: 2013, operating hours: 3,500 h, machine/vehicle number: FA58, Used TECMI - Smipack shrink wrapper - 2013Technical Specifications & Performance DataThis automatic shrink wrapper is engineered for reliable bundling and shrink packaging in high-demand beverage production and industrial packaging environments. Manufactured by TECMI, the model BP802ARV 380R delivers consistent throughput and robust construction suitable for second hand and used bottling line integrations.Manufacturer: TECMIModel: BP802ARV 380RYear: 2013Production speed: 8,000–12,000 bpmFormats: PET 0.38L bottles, 24-pack bundlesContainer types: PET bottlesDimensions (X × Y × Z): 4140 × 3230 × 2095–2255 mmWeight: 1400 kgElectrical data: 440 V, 60 Hz, 27.25 kW, 45 A, 3PH+PEAdvanced Automation & Control SystemsDesigned for automatic operation, the TECMI BP802ARV 380R streamlines pack formation and shrink-wrapping with minimal operator intervention. Its architecture supports precise film handling, consistent sealing, and stable oven performance for uniform pack quality across long shifts. The electrical system is configured for industrial-duty 440 V, 60 Hz power, with optimized energy usage at 27.25 kW. Safety-rated components and clear operator stations help ensure dependable performance with straightforward controls suitable for modern production standards.Production Line Integration CapabilitiesThis shrink wrapper integrates smoothly as a standalone machine or in-line with upstream and downstream bottling equipment, including conveyors, fillers, labelers, and case handling units. It is well-suited to beverage production lines that handle PET bottles and require regular format changes for multi-pack configurations. The machine’s layout accommodates standard conveying interfaces for efficient infeed and discharge, enabling flexible installation within existing packaging machinery cells on used bottling line upgrades.Machine Condition & Maintenance HistoryThe machine is currently in storage, presenting an excellent opportunity for facilities seeking a second hand shrink wrapper ready to be recommissioned. Its year of manufacture (2013) and industrial-grade build provide a solid foundation for reliable operation after standard installation checks and start-up procedures.Operational Performance & VersatilityOptimized for PET bottle bundling in 24-pack configurations, the BP802ARV 380R provides consistent throughput across the 8,000–12,000 bpm range, supporting high-volume beverage production. The shrink tunnel delivers stable temperature control for tight, visually consistent packs. Its design supports common beverage applications where durable film seals and stable packs are critical for downstream palletizing and logistics.Installation Requirements & Site PreparationPlan for a footprint consistent with the layout dimensions (X: 4140 mm, Y: 3230 mm, Z: 2095–2255 mm). Provide a 3-phase 440 V, 60 Hz electrical supply with appropriate protection for a connected load of approximately 27.25 kW and 45 A nominal current. Ensure adequate ventilation around the shrink tunnel and safe access for operators and ma... Ppsdpfx Aheyhbh Devop

Condition: used, Year of construction: 2003, Manufacturer: Pester pac automation Model: PEWO-pack 450 (with PEWO-therm tunnel) Year: 2003 Type: PE shrink wrapper/band wrapper with shrink tunnel Application: bottles, vials, vertical cartons, etc. Maximum speed: 60 products/min Passage width: 450 mm Configurable batch sizes Product guidance via upper belts and support rails Film type: PE Film width: 50–250 mm Film thickness: 0.025–0.10 mm Max. roll diameter 300 mm. Psdpox R D Adefx Ahvepp Power supply: 3×400 V + N + PE, 50–60 Hz. Installed power: 10 kW (≈ 19.0 A) Air pressure: ≈ 5–10 bar The machine is sold with a dual-position feed conveyor: Feeding system for shrink wrapper Accumulation conveyor feeder for manual packaging Various formats available Complete documentation

Year of construction: 2023, condition: excellent (used), Shrink wrap machine Ppsdpsyw Tqdefx Ahvjp