Used Blown Film Lines for sale (9,658)

Condition: ready for operation (used), Year of construction: 2001, A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Kiefel Worms 80.25D outer layer extruder, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Reinhold SRK 200/9.6 film calibrating device. The entire line is controlled by a Plast Control system. Further components: integrated width measurement, C-scan for profile measurement, web center control, corona pre-treatment, film pre-draw. Including a replacement FSBK 5-layer blow head with IBC, replacement rollers, annular gap blower with filter, suction units, crane and external system terminal. Documentation available. On-site inspection is possible. Bsdpfx Aiov T An Se Nowr

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Bedpfekn Rz Hsx Ai Nswr Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Year of construction: 2018, condition: like new (used), functionality: fully functional, MACCHI COEXTRUSION LINE FOR 7-LAYER EVOH BLOWN FILM Complete line for the production of 7-layer EVOH blown film 4 Macchi extruders with 65 mm screw diameter 3 Macchi extruders with 55 mm screw diameter Innoplast gravimetric dosing units 7-layer die head, 450 mm diameter with IBC, 2.4 mm GAP K-Design cooling ring Bwedpfx Asy Nk Haoi Ner Double thickness control IR+XRay Maximum width 2400 mm Calibration basket Rotating haul-off Cason corona treater Macchi BO-Plus double back-to-back automatic winder Web guide Year 2018

Year of construction: 2026, condition: new, functionality: fully functional, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Bedpswg R Rtefx Ai Nswr

Year of construction: 2001, condition: good (used), Build in :2001 (Cyklop XZE-311-22), 2001 (Cyklop GL 2000) Description/configuration: Complete line for automatic pallet strapping (double or cross), automatic stretch-wrapping of pallets. Includes fully automated pallet conveying. Complete line with multiple infeed positions, configured as follows: > infeed conveyor with fenders (bump protection), motorized, l~1500 mm, REF 25643.02 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.02 > chain transfer conveyor, motorized, l~3700 mm, REF 25463.03 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.04 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.05 > roller conveyor, with fenders (bump protection),motorized, l~1500 mm, REF 25643.06 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.07 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.08 > chain transfer conveyor, motorized, l~3000 mm, REF 25463.09 > chain transfer conveyor, motorized, l~3000 mm, REF 25463.10 > roller conveyor (buffer), motorized, l~1800 mm, REF 25643.11 > pallet strapper Cyklop XZE, REF 25643.30 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.12 Bedpfx Aijhtmp Tj Njwr > roller conveyor underneath wrapper, motorized, with pallet lifting device, l~2100 mm, REF 25643.13 > pallet film wrapper GL 2000 ring style, REF 25463.40 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.14 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.15 > 90° turntable conveyor, motorized, l~1800 mm, REF 25643.16 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.17 > pick-up position for strapped & wrapped pallets, with fenders (bump protection), motorized, l~1500 mm, REF 25643.17 max speed in pallets/h: 50 pallets/h Roller conveyor, Chain conveyor (transfer conveyors) Pallet width of up to 800 mm Pallet length of up to 1200 mm max height full pallet (max passage height): ~2000 mm max weight full pallet: 1500 kg Over all length equipment: ~16000 mm Over all width equipment: ~9000 mm Over all height equipment: ~4200 mm Voltage: 400 V, 3 Ph, 50 Hz Air requirement: 6 bar Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1 hrs), Berlin (~2 hrs)

Year of construction: 2004, condition: good (used), Build in 2004 Description/configuration: Complete line for automatic pallet strapping, automatic stretch-wrapping of pallets. Includes fully automated pallet conveying. Line with ""straight""-configuration, built with chain conveyors and configured as follows: > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.01 > pallet strapper Cyklop XZE-3111, REF 25778.30 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.02 > Straight chain conveyor underneath wrapper, motorized, travel is long side leading, l~2600 mm, REF 25778.03 > ring style pallet film wrapper Cyklop GL 2000, REF 25778.40 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.04 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.04" Layout available max speed in pallets/h: 50 pallets/h Chain conveyor Pallet width of up to 800 mm Pallet length of up to 1200 mm max height full pallet (max passage height): ~1700 mm Height of pallet conveying (min=300mm): ~400 mm max weight full pallet: ~1500 kg Over all length equipment: ~8000 mm Over all width equipment: ~6000 mm Bwodpjhrmlksfx Ai Nsr Over all height equipment: ~3500 mm Input Power: ~15 kw (whole line) Voltage: 400 V, 3 Ph, 50 Hz Air requirement: 6 bar Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1,5 hrs), Leipzig (~2hrs), Berlin (~2,5 hrs) Condition: cleaned & in working conditions Machine available: upon request

Year of construction: 2010, condition: good (used), Cyklop Pallet strapping & film wrapping line: Cyklop XZE-311-22 pallet strapping Cyklop GL 1020M - pallet film wrapping Build in 2010 (XZE-M) 2006 (GL 1020M) Pallet strapper Cyklop XZE-311-22: Speed: up to 100 Palles/h Pallet sizes: 800x1200 mm, 1000x1200, 1200x1200 mm Passage height: max 2700 mm (from floor) min height pallet conveyors: 300 mm max palletizing height: ~2500 mm - height conveyors (incl. pallet) max weight pallet: 1.500 kg Height over all: ~4200 mm Elektrical: 400 VAC, 3Ph/N/PE, 50 Hz, ~6 kW Dimensions (L x W x H): appr. 2.000 x 7.000 (incl. strapping reels) x 4.200 mm Weight: ca. 4.000 kg Bwsdpjg S Twusfx Ai Nsr GL 1020M: Speed: up to 50 Pallets/h Pallet sizes: 800x1200 mm, 1000x1200, 1200x1200 mm Passage height: max 2200 mm (from bottom pallet) min height pallet conveyors: 300 mm Working height: 500 - 2000 mm (inkl. Palette) Film, outside (new) reel diameter: max 400 mm Film, reel width: max 500 mm Film thickness: 17/23/35 µm max pallet weight: 1.500 kg Elektrical: 400 VAC, 3Ph/N/PE, 50 Hz, ~3 kW Dimensions (L x W x H) : ca. 1.800 x 3.000 x 3.500 mm Weight: appr. 1.500 kg Equipment: Complete line, "L"-configuration (long leg ~20m, short leg ~5m) for pallet strapping & stretch wrapping, configured as follows: > Infeed position for pallets, motorized > pallet strapper Cyklop XZE with two strapping heads, three strap guides, integrated turntable for cross-strapping of pallets > buffer position for pallets, motorized > pallet film wrapper Cyklop GL 1020, film dispensing through fix lateral arm with pallet rotating on turntable > buffer position for pallets, motorized > turntable for pallets, 90° turn left or right, motorized > ejection of the turned pallet onto pick-up positions, motorized SEE LAYOUT FOR MORE INFO"

Year of construction: 2000, condition: good (used), Cyklop Pallet strapping & film wrapping line: Cyklop XZE-311-22 pallet strapping Cyklop GL 1020M - pallet film wrapping Build in 2000 (XZE-M) 2000 (GL 1020M) Pallet strapper Cyklop XZE-311-22: Speed: up to 100 Palles/h Pallet sizes: 800x1200 mm, 1000x1200, 1200x1200 mm Passage height: max 2700 mm (from floor) min height pallet conveyors: 300 mm max palletizing height: ~2500 mm - height conveyors (incl. pallet) max weight pallet: 1.500 kg Bwjdpfxog A Hflj Ai Nor Height over all: ~4200 mm Elektrical: 400 VAC, 3Ph/N/PE, 50 Hz, ~6 kW Dimensions (L x W x H): appr. 2.000 x 7.000 (incl. strapping reels) x 4.200 mm Weight: ca. 4.000 kg GL 1020M: Speed: up to 50 Pallets/h Pallet sizes: 800x1200 mm, 1000x1200, 1200x1200 mm Passage height: max 2200 mm (from bottom pallet) min height pallet conveyors: 300 mm Working height: 500 - 2000 mm (inkl. Palette) Film, outside (new) reel diameter: max 400 mm Film, reel width: max 500 mm Film thickness: 17/23/35 µm max pallet weight: 1.500 kg Elektrical: 400 VAC, 3Ph/N/PE, 50 Hz, ~3 kW Dimensions (L x W x H) : ca. 1.800 x 3.000 x 3.500 mm Weight: appr. 1.500 kg Equipment: Complete line, "L"-configuration (long leg ~20m, short leg ~5m) for pallet strapping & stretch wrapping, configured as follows: > Infeed position for pallets, motorized > pallet strapper Cyklop XZE with two strapping heads, three strap guides, integrated turntable for cross-strapping of pallets > buffer position for pallets, motorized > pallet film wrapper Cyklop GL 1020, film dispensing through fix lateral arm with pallet rotating on turntable > buffer position for pallets, motorized > turntable for pallets, 90° turn left or right, motorized > ejection of the turned pallet onto pick-up positions, motorized SEE LAYOUT FOR MORE INFO"

Year of construction: 2011, condition: good (used), The extrusion line No. 1 was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: Bsdpfxjpah U Te Ai Nswr - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system INFRA STRUCTURE (ADDITIONAL UNITS): Dryer 1 – 4 with 4500-liter volume; heating capacity 48kw
 Dryer 5 with 2500-liter volume; heating capacity 20kw
 Dryer 6 with 1500-liter volume; heating capacity 15kw
 Each extruder has a gravimetrical batch-dosing unit with 3 stations. Each extruder has a melting pump and a 2-piston filter change system. MAIN LINE COMPONENTS MANUFACTURERS: SML: extruder; Chair, rollers, winding device GWK: cooling extruder KREYENBORG: screen changer Cloeren: feed block, slot die PIOVAN: dryer, dosing device SERVE: Edge band cutting device MATHO: suction RAPID: Edge strip shredder KONGSHILDE: Recyling edge strips, start rollers INFSTAUB: filling station SMK: chillers SIEMENS: control OCS: camera system SEMET: labeling system AFS: Corona Sation BETA CONTROLL: Radiometric thickness measurement SML: autom. FYLING SPLICE winding unit, BECKOFF control SIMCO: antistatic ALTEK: automatic roll manipulator (transfer carriage)

Condition: new, functionality: fully functional, Year of construction: 2022, Complete extrusion line for the production of PVC shrink film, specifically designed for sleeve-label applications. Built in 2022 by RL Plastproject (Italy), the machine is brand new, never installed, and immediately available. Technical Specifications: Bjdpfxow Ahfgs Ai Nowr Product: PVC shrink film for sleeves Material: Rigid PVC dry blend Extruder: Single-screw with venting and gravimetric dosing Output: approx. 180–200 kg/h Film thickness: 40–80 micron Usable film width: up to 620 mm Die width: 900 mm Line speed: up to 60 m/min (depending on film) Cooling: Calender with chill roll Orientation: Transverse shrink forming unit Corona treater: Integrated Winding: Dual-position slitter-rewinder Control system: Siemens PLC with touchscreen HMI Installed power: ~220 kW (to be confirmed) Air requirement: 6 bar Footprint: approx. 25 x 6 meters

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, for PE layflat tubing from the roll, film widths up to 400 mm, bag lengths up to 750 mm, film thickness 0.05 to 0.14 mm, bag length infinitely adjustable, bag separation by knife, safety device for transverse sealing Bwsdpfoyrmuwex Ai Ner

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Manufacturer: WEILEDER Model: WTK -40/55 PT Category: Packaging machine Year of manufacture: 2018 Location: Ex site Availability: Short-term Operational condition: Dismantled/in storage Technical Data Bedpfxoyatgce Ai Njwr Passage width: 400 mm Passage height: 200 mm Workpiece length max.: 550 mm Film width max.: 600 mm Number of rollers bottom: 1 Total units: 1 Longitudinal units: 1 Magazine slots: 1 Packaging stations: 1 Conveyor technology: Stepless feed Shrink film: Longitudinal film station Discharge: Automatic version Mobile device closure Sealing units Conformity marking: CE marking Total connected load: 9 kW Space requirement length: 2.57 m Space requirement width: 0.87 m Space requirement height: 1.6 m

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. Bedsu Ttf Njpfx Ai Nswr The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Take-off device and impact shears

Condition: like new (used), High-Quality Meltblown Production Line for Nonwovens A complete machine inspection was carried out by the manufacturer's service team on 17.12.2025. Inspection report available. Commissioning at the customer's site can be offered upon request. Operating hours: 80 hours (commissioning only) Price for a new machine: EUR 7,500,000 • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 • Year of manufacture: 2021 • Last commissioning: 2022 Bedpfxjx Hx Rns Ai Nswr Technical specifications: • Working width: 1,600 mm • Material: Polypropylene (PP), MFI 230 / 2.16 > 400 g/10 min • Output: Up to 65 kg/h per meter width • Product weight: 10–80 g/m² • Production speed: 5–80 m/min • Die head: MB 1600, 50 h/in • Extruder: RT-1101-1-100, L/D 30 • Heating capacity, rotary beam: 65–172 kW • Winder: contact winder with preset reel change • Max. winding diameter: 1,250 mm • Web width: 1,700 mm • Winding tension: 10–100 N/m Additional equipment and accessories: • 3-component dosing system • 80 mm automatic seat changer • Ultrasonic cleaning system • Pyrolysis unit • Ozone extraction • Cutting knives • Central control panel with touchscreen and data entry

Condition: good (used), Overall dimensions: 5400 x 1500 x 720 mm Bwjdponqyz Iofx Ai Nor Track length: 9000 mm Drive: electric

Condition: excellent (used), Installed new in 2022, this conveyor was taking product from a low level multihead weigher up to a vertical form fill seal machine in a room where the height was restricted. As new condition. Bwedpsrq Eawefx Ai Nor

Year of construction: 2013, condition: ready for operation (used), Mariani Shrink film wrapper Bodjyilyqepfx Ai Nowr Model: TRM 700-LF-I YOM 2013 Including in/outfeed conveyor system Working width: 700mm Cardboard Trays – Cases with protective shrinked film Portion packs : 3 x 8 – 3 x 9 – 3 x 10 Family packs : 2 x 6 – 3 x 4 Output: Max 25 trays per min, varying according to the format required Dimensions machine (LxWxH): 5000x1400x2100mm

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Bwsdern Sqhjpfx Ai Njr Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Strip Width: 2000mm – 600mm Sheet Length: 8000mm – 600mm Pack Weight: 10 t Max Line Speed: 60 meters/min Cuts Per Minute: 35 Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Bwedjq Ulh Hopfx Ai Nor Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator Flywheel & Air Clutch and Brake Rack & Pinion Accelerator 35 Cuts per Minute Reject Conveyor Twin Belt Gauging Table Stacker Side Squaring Lift Stacking Tables Photo Cells Drop Type Motorized End Stop Motorized Run Out Conveyor Upgraded AC Motors Upgraded Control Techniques Digital Drives Complete Line

Condition: used, Year of construction: 2007, Auction of a drilling line with the following components: PRIESS EIN-Igel (Vertical storage system) PRIESS BAT-DTW-CNC PRIESS BAT-DTW-CNC PRIESS BMA DLS-CNC WANDRES CVT 05/1000 PRIESS Conveyor system TECHNICAL DETAILS Vertical storage system Max. panel width: 500 mm Max. panel length: 1,500 mm CNC drilling machine Machining process: Drilling Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Max. panel thickness: 26 mm Number of drilling units: 4 Total number of drilling spindles: 88 Drilling unit 1 Position: Top Vertical drilling spindles: 23 Drilling unit 2 Position: Top Vertical drilling spindles: 23 Drilling unit 3 Position: Bottom Vertical drilling spindles: 12 Drilling unit 4 Position: Bottom Vertical drilling spindles: 20 Bodpfx Aiszmtpvo Nowr CNC drilling and dowel insertion machine (Priess BAT-DTW-CNC) Machining process: Drilling and insertion Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Number of working areas: 1 Total number of drilling spindles: 49 Number of drilling units: 4 Drilling unit 1 Position: Top Horizontal drilling spindles in X-direction: 8 Drilling unit 2 Position: Top Horizontal drilling spindles in X-direction: 17 Drilling unit 3 Position: Top Vertical drilling spindles: 12 Drilling unit 4 Position: Top Vertical drilling spindles: 12 Insertion unit Number of insertion units: 1 Number of injectors: 10 Number of hoppers: 1 Insertion material: Wooden dowels CNC drilling and insertion machine (BMA DLS-CNC) Machining process: Drilling and insertion Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Number of controlled axes: 3 Main electric spindle power: 4.4 kW Number of milling spindles: 3 Number of insertion units: 2 Milling spindle 1 Position: Top Number of controlled axes: 3 Motor power: 4 kW Milling spindle 2 Position: Top Number of controlled axes: 3 Motor power: 4 kW Milling spindle 3 Position: Top Number of controlled axes: 3 Motor power: 4 kW Grooving unit Position: Top Insertion unit 1 Number of injectors: 1 Number of hoppers: 1 Insertion unit 2 Number of injectors: 1 Number of hoppers: 1 Brushing machine Max. working width: 800 mm Max. machining width: 800 mm Max. machining length: 2,500 mm Brush diameter: 160 mm Roller conveyor Max. panel width: 800 mm Max. panel length: 2,500 mm Panel feed: Motorized belt

Condition: excellent (used), Year of construction: 2022, Foil Pie Line Rinc Rijkaart 5 wide The line is commissioned but we do not have customers for foil Pies 2022 Machine date only trials have been made on the machine. Product Ø 110 mm round pie, 40 mm height – 5 products across – 125 prod/min, Filling weight approx.. 170 grams. Bodpfsxu Duxex Ai Njwr

Condition: used, Year of construction: 2012, operating hours: 759 h, machine/vehicle number: LC644, Used Kronse CSD filling line for Glass 36000 BPHTechnical Specifications & Performance DataThis line is build in 2012, Krones complete line for glass CSD, rated 36,000 bottles/hour in 1.0 L format, with a 70‑valve isobaric filler and 18 capping heads. ready for operation, and shows 759 working hours.Manufacturer: KronesYear of manufacture: 2012Nominal capacity: 36,000 bphProduct type: CSD (carbonated soft drinks)Container type: Glass bottlesBottle neck finish: 28 mmVolume format: 1.0 LRinsing heads/nozzles: 90Filling valves: 70 (isobaric filler for CSD)Capping heads: 18Working hours: 759Electrical ratings: 400/230 V, 50 Hz; up to 46 A on major modulesLine components: Krones Linatronic empty-bottle inspector; rotary rinsing machine (90 nozzles); isobaric filling machine (70 valves, 18 capping heads); Krones Checkmat filled-container inspector; Krones Autocol labeling machine; Krones Variopac wrap-around packer; Krones Modulpal palletizer; integrated conveyor systemDocumentation: Operating manuals availableLayout: Line layout availableAdvanced Automation & Control SystemsKrones automation with centralized HMI enables recipe-based changeovers and synchronized drives for high-speed CSD operation.Operator HMI for setup and monitoringAutomatic synchronization across rinsing, filling, labeling, packing, palletizingElectronic fill control optimized for isobaric CSD fillingInterlocked safety guards and distributed emergency stopThree-phase 400 V supply with 230 V control circuits, 50 HzProduction Line Integration CapabilitiesEngineered as a cohesive Krones platform and bottling station, maintaining precise glass handling from infeed through palletizing.Inline operation with full conveyor integration from empty bottle inspection to finished palletsFormat range centered on 1.0 L, 28 mm neck glassIsobaric technology dedicated to carbonated soft drinksLabeling via Krones Autocol for accurate application on glassWrap-around case packing (Variopac) and palletizing (Modulpal)Machine Condition & Maintenance HistoryOn power and ready for operation with low hours. Documentation and layout support fast installation and service planning.Operational status: ready for operationLow-hours profile: 759 hoursManuals and layout includedOperational Performance & VersatilityConfigured for glass CSD, providing stable carbonation retention and foam control at 36,000 bph. As a CSD bottling machine, quality control is ensured by dual inspection: Linat... Bwjdpfx Aiozd Ufto Nor

Condition: used, Industrial shredder or shredding line with carbide blades for shredding various materials such as wood, cardboard, glass fibre mats or similar, e.g. as a pre-treatment for recycling processes. The plant consists of two feed conveyors, the shredder, a transport fan and a soundproof enclosure. Technical data: - Total power: 31.7 kW - Shredder motor: 7.5 kW - Feed width: 550 mm - Feed height: approx. 25/75 mm - Fan: 22 kW / 10,800 m³/h Bwedpfx Aszrx Hdoi Ner

Condition: used, Weinig Unimat 23 E + Uniplan 23 planing line, including a return conveyor. An NC-controlled line for planing and profiling window scantlings, including glazing bead cutting or other planing tasks, with automatic return of the workpieces to the operator. Technical data: - Spindles: 4 + 2 - Working width: 230 mm - Working height: 120 mm - Spindle 1: 7.5 kW / 50 mm / 8,000 rpm Bwodpfx Aozrxzusi Njr - Spindle 2: 11 kW / 50 mm / 8,000 rpm - Spindle 3: Shared motor with spindle 2 / 50 mm / 8,000 rpm - Spindle 4: 7.5 kW / 50 mm / 8,000 rpm - Spindle 1 Uniplan: 5.5 kW / 50 mm / 7,200 rpm - Spindle 2 Uniplan: 5.5 kW / 50 mm / 7,200 rpm - Feed rate: 5–24 m/min - Control: Nexus PC control system - NC axes: Unimat 2 & 3, Uniplan 1

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla pallet dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm Bodpfov I Akvjx Ai Nswr - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035