Used Blown Film for sale (1,416)

Condition: used, Year of construction: 1986, Saint-Gobain Desjonqueres Debalpack 800. Nwsdpfx Adsxxctbohjp Unpacker of bottles under film. Year 1986 Saint Gobain accumulation table Introduction of the pack in automatic Automatic pack opening Automatic bottle transfer Automatic film evacuation Automatic film ejection History, documentation and electrical diagrams available

Year of construction: 2007, condition: like new (used), functionality: fully functional, Tape Machine Manufacturer: Ruscher Model: RU-FE Year: 2007 Information Tape-applying machine with roller conveyors, total length 11 meters. Suitable for facade profiles and many other types of profiles that need to be coated with protective film tape. Nwjdpfjxyyc Ajx Adhjp Dimensions Length: 11,000 mm Width: 800 mm Height: 1,400 mm Seller’s Comments Fully functional Used in a production line for aluminum profiles Can be separated for transport

Condition: used, mileage: 51,843 km, power: 120 kW (163.15 HP), first registration: 09/2001, overall weight: 9,200 kg, fuel type: diesel, color: green, axle configuration: 4x4, empty load weight: 8,550 kg, tire size: 365/80 r20 mpt, next inspection (TÜV): 10/2023, wheelbase: 3,700 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: other, loading space volume: 18 m³, loading space width: 2,344 mm, loading space length: 4,044 mm, loading space height: 1,900 mm, Year of construction: 2001, machine/vehicle number: 0050219/23, Equipment: all wheel drive, differential lock, low noise, Dear Sir or Madam, We offer you the rare opportunity to acquire a Unimog U 1550 L in excellent condition. This vehicle was used by the German Armed Forces as a direction and film vehicle and is equipped with a heavily insulated box body by Eggers Fahrzeugbau. The body features its own air conditioning system. The engine has only accumulated 2,885 operating hours. Overall, the vehicle has been very well maintained and exhibits minimal corrosion. The body is ideally suited for conversion into an expedition vehicle or camper. Please note: the vehicle meets Euro 2 emissions standards, which means no AdBlue is required. You will not find electronic systems in this vehicle, making it absolutely reliable. However, the box body is equipped with its own electronics, which are still functioning perfectly. The Unimog was built at the end of 2001, making it one of the last units of its model series. Vehicle Data: Unladen weight: 8,550 kg Gross vehicle weight: 9,200 kg Payload: 2,650 kg Towing capacity: 6,000 kg Box Body Dimensions: External length without attachments/fittings (approx.): 4,150 mm External width (approx.): 2,550 mm External height without attachments (approx.): 2,100 mm Height of interface carrier vehicle (approx.): 1,240 mm Overall length of carrier vehicle with box (approx.): 6,500 mm Overall height of carrier vehicle with box (approx.): 3,660 mm Internal length (approx.): 4,044 mm Internal width (approx.): 2,344 mm Internal height (approx.): 1,900 mm Floor height of box above road (approx.): 1,351 mm Sale in existing condition and only to other businesses! Optionally, a new original MB split gearbox can be installed at additional cost. Our business hours: Mon-Thurs: 07:00 am – 03:30 pm Fri: 07:00 am – 03:00 pm Price plus 19% VAT Offer subject to our general terms and conditions! Sale only to business customers! Nwodpfom E Uuxox Adhsp Used vehicles / used equipment sold without liability for material defects according to our terms and conditions! If you have any questions, I will be happy to assist you. Please schedule an appointment in advance for viewings and/or test drives!

Condition: used, No. 10025 Cutting mill Alpine RO 40/63 Used According to our customer, the machine is fully functional and can be inspected on site Motor power 30 kW Rotor diameter 630 mm Rotor width 400 mm Rotor knives 5 rows with 3 knives each Stator knives 1 row with 3 knives to the front and 2 rows with 3 knives to the rear Maximum permissible speed of the drive shafts 560 rpm The cutting mill Alpine RO 40/63 with patented cross-shear rotor guarantees optimum material distribution with maximum cutting performance. Nodpfx Ajxph Avodhswp The hinged screen holder allows easy removal of the screen and perfect access for cleaning the machine and replacing the blades. Ideal for industries such as recycling (for blown film, cables, plastics, etc.) and food (tea, spices, dried vegetables, etc.). Sale on behalf of customer, ex location near 72072 Tübingen, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan Nwjdotndpzspfx Adhep - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Year of construction: 2019, condition: excellent (used), Bizerba Label Secure L Basic The Bizerba LabelSecure vision inspection system automatically checks label position and texts. Bizerba LabelSecure can be integrated in conveyor lines with dynamic checkweighers. Thereby offering a high level of flexibility and adaptability to existing systems. Used with an inline dynamic checkweigher the system will add another level of protection on your production line. Consider the Dynamic checkweigher CWEmaxx. The system will checkweigh and reject any over filled and under filled packages. In addition, the vision inspection system performance is impressive, automatic control of label position, texts and film colour. Any packages that do not conform to the programmed or set criteria will be rejected. Also, package sizes and bar codes are verifiable. All packages that fall outside of the date range set up in the Vision Inspection System will be rejected, Ensuring out of date or short sell by dated products do not reach your customers. Furthermore, complete process control and complete transparency ensured by statistical reporting. No more incorrect packages at the end of the production ramp. In terms of compliance with production requirements, you are protected. For more information on the Bizerba range of products and services contact us today. Nodpfx Aov D Dxyjdhswp Matching your production line the LabelSecure is available as an In line solution or as an offline solution. Manufacturer: Bizerba Model: Label Secure L Basic Year: 2019 Package Size LxWxH: 340x220x105 mm Camera System: 2 cameras top and bottom Max. belt speed: 90 m/min. Rejection System: Reject bin Machine Dimensions LxWxH: 1.300x1.200x2.100 mm Machine Weight: 300 kg.

Condition: used, Continuous Heat shrink tunnel of BFB Packaging S. R. L. model M32N. Adjustable manual damper Internal circulation fan Exit cooling fan 380 V / 50 Hz Control panel with digital temperature regulation, emergency stop, painted steel construction and mounted on four adjustable feet. Nedpfx Aoxxcnljdhewp Material used to apply heat shrinkable film to bundles, packages, packs.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 68086, Machine can make rolls with paper core. And Coreless rolls (Without cardboard tubes) Semi-Automatic Coreless Prestretch Rewinding Machine Specification • Maximum parent roll diameter 500mm • Maximum web width 600mm. Master roll core 76mm diameter. 4 roller stretcher train geared to give a stretch of 335% • Servo driven rewind to vary collection tension from 240% to 335%. Adjustable external electronic rewind Variable speed drive up to 450 meters per minute. • Single position coreless rewind station for either 50, 60 or 76mm ID rolls. (with change parts) • Programmable electronic roll length counter. Maximum rewind roll diameter 250mm. Slitting blades for multiple finished roll winding (with change parts) Rolls can be produced with or without oscillation and edge guiding Film break sensor. 3 - phase 400 volt supply. / Air requirements - 4 cfm max. at 80 psi. Nwjdpfx Ajxpq T Rodhjp Guarding to suit current C.E. requirements

Condition: ready for operation (used), functionality: fully functional, The SFC7045 is an essential, entry-level, or specialty clipper designed for operations that require flexibility, portability, and reliable sealing without the capital investment of a fully automatic machine. Cost-Effectiveness & Flexibility Low Capital Investment: Provides a professional, secure clip closure solution at a fraction of the cost of automatic double clippers. Nedpfx Adexv Rznjhewp Versatile Clipping: Ideal for a wide range of products, including securing casings, bags, netting, mesh, and various packaging films. Portability: The wheeled, compact, free-standing design allows it to be easily moved and used at multiple filling stations or production points. Quick Changeover: Simplicity in design means faster setup and changeover times between different products or clip sizes. Reliable Operation & Control Secure Single Closure: Applies a highly reliable single clip that ensures the product is sealed securely and maintains its structure, crucial for presentation and integrity. Semi-Automatic Control: Operator-controlled, ensuring the precise placement of the clip relative to the product, which is often preferred for specialty or irregular items. Durable Performance: Built with robust components, ensuring a long operational life and reliable cycle consistency, even under high-volume manual feeding. Hygienic Design: Constructed with stainless steel or food-grade materials on the product-facing components, facilitating easy and effective cleaning. Ideal clipper for Any Stuffer Perfect for Batch Work: Excellent for use with high-precision fillers like the Handtmann VF series when processing small batches, samples, or products that require unique manual handling before clipping. Starter Automation: Serves as the perfect stepping stone from manual tying to automated clip sealing, immediately improving product security and presentation.

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. Nwedpfsxw Tgpsx Adhep The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: used, functionality: fully functional, Technical specifications (typical for the SK 500s model): Working area: approx. 500 × 500 × 500 mm Design: Tabletop or freestanding, compact Abrasive: Glass beads, corundum, ceramic beads, etc. Blasting principle: Injector principle (suction blasting) Nsdpfxev Syvqs Adhswp Compressed air consumption: approx. 200–400 l/min at 4–7 bar Lighting: Integrated LED or fluorescent lamp Viewing window: Safety glass with replaceable protective film Filtration: Integrated cartridge filter or external dust collector Abrasive return: Automatic, via cyclone separator Special features: Ergonomic glove ports Footswitch operation for safe working Compact design – ideal for workshops and laboratories Quiet operation thanks to sound insulation Easy to maintain and durable

Condition: good (used), Webomatic APS ML 7100 thermoformer The APS ML 7100 is the ideal tool for the industrial serial production of superior thermoformed packages. Even bigger dimensions enable the realisation of more flexible packaging! Our high-end solution can use all film materials common in trade up to 620 mm width with a repeat length of up to 800 mm: Depending on the product requirement and the client’s specification the APS ML 7100 can use soft film and rigid film materials, also printed top and bottom film as well as stable or reclosable packages. Equipped with two separate stainless steel lifting systems with adjustable opening width, the modular APS ML 7100 is extremely flexible in length and width: This industrial solution does not only offer an extra long filling area for the comfortable fully automatic filling process, but also a flexible cutting area for the optional punching, printing, labelling. Nwjdpfxsqmndcs Adhep This machine will be shipped with 1 tool: 2×1: Traysize 385×285 (variable depth with a max. of 190mm) Brand: Webomatic Model: APS ML 7100 Year: 2004 (completely refurbished in 2023) Top film width: 600 mm Bottom film width: 620 mm Deep drawing depth: 190 mm Cutt off length: 400 mm Vacuum Pump: Busch 100-132 / Busch WV 500 Power: 21kW / 35A / 400V /50Hz Pressed air connection: 6-12 bar Operational air pressure: 6 bar Machine Dimensions (LxWxH): 7.800x1.300x2.100 mm Machine Weight: 2.600 kg.

Condition: used, Year of construction: 2006, power: 11 kW (14.96 HP), Manufacturer: Robopac Model: Athena 5545 / Combi Year : 2006 Nsdpfx Aexxchxsdhjwp   Type : Automatic L-shaped shrink-wrapper and shrink tunnel Dimensions of sealing bar : 550 x 450 mm Sealing dimensions : 500 x 350 mm Minimum product size : 50 x 50 x 20 mm Maximum product height : 120 mm Film reel width: 600 mm Inverter-controlled conveyor belt speed: 10 – 40 m/min Production capacity: 30-35 packs/minute (depending on product dimensions and shrink film specifications) Power: 11 KW   Machine in operation: ?v=XY4arSTWZSs  

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Layers: 5 Web Width: 1,500 mm Film thickness range: 10–45 μm Output: - 15 μm: up to 745 kg/h - 17 μm: up to 845 kg/h - 23 μm: up to 905 kg/h Final film widths (per bobbin): - 3 x 500 mm - 6 x 250 mm - 3 x 400 mm - 2 x 750 mm Coextrusion Structure / Number of Layers: 5 layers Layer distribution: B / A / D / A / C Percentage: 10 / 35 / 10 / 35 / 10 % Raw materials: - LLDPE: 2.8–5.0 g/10min (190°C/2.16kg) - VLDPE: 2.8–5.0 g/10min (190°C/2.16kg) Extruder "A": 90/33 L/D, Maximum LLDPE output: 800 kg/h Extruder "B": 60/28 L/D, Maximum LLDPE output: 200 kg/h Extruder "C": 60/28 L/D, Maximum LLDPE output: 200 kg/h Nodpfxjxyuffj Adhswp Extruder "D": 60/28 L/D, Maximum LLDPE output: 200 kg/h Flat die lip width: 2,050 mm Roll width: 2,100 mm Chill roll C1 diameter: 1,600 mm Maximum mechanical speed: 650 m/min MATERIAL FEEDING AND DOSING "A": - 1 main component material feed - 1 additional component material feed - 1 gravimetric batch dosing system (mounted directly on the extruder, 3 components) MATERIAL FEEDING AND DOSING "B, C, D": - 3 main component material feeds - 6 additional component material feeds - 3 gravimetric batch dosing systems (mounted directly on the extruder, 3 components each) Extruder "A": - SML Single-Screw Extruder SML-ES-90/33 - Tool unit: Manually operated screen changer SML-MF-man/90 Extruder "B, C, D": - 3 SML Single-Screw Extruders SML-ES-60/28 - 3 Tool units: Manually operated screen changers SML-MF-man/60 Cloeren 5-layer/3-up Stretch Film System consisting of: - 1 five-layer feedblock FG - 1 automatic flat die, 2,050 mm (for automatic die control) - 1 die splitting system for flat die body separation and cleaning - 1 vacuum box, 2,050 mm - 1 triple-chamber vacuum box SML-TC/2050mm Cooling and take-off unit: - 1 casting section SML-CS/2100/650 - 1 electrostatic edge pinning device - 1 thickness measuring unit (X-ray sensor for automatic dies, stretch wrap film) - 1 recovery system for feeding stretch wrap film with vertical scraptruder for SML 90 mm single-screw extruder - 1 antistatic pipe - 1 power supply unit for antistatic pipes Winding unit: - 1 Cast Film Turret Winder Series W4000 for stretch wrap films - Max. end film width: 3 x 500 mm - Number of turrets: 1 - Number of winding shafts: 4 - Winding shaft diameter: 3" - Max. mechanical winding diameter (3" bobbins): 400 mm - Min. winding diameter: 82 mm - Winding tension: 15–100 N/m - Contact pressure: 50–500 N - Cycle time (3" core magazine): 20–25 s - High-speed Cast Film Turret Winder for stretch wrap film—compatible with 3" air shafts, contact winding mode - 1 automatic core and roll handling system W4000 4S1T (per turret) - 1 oscillating frame SML-OF/2100 Control and data logging: - 1 SML Automatic Control System SML-CS-2/SMILE/4 extruder - 1 SML Data Logging System: SMILE Process Analyzer - 1 E-container (20 ft) Chiller: Frigosystem Compressor unit: MSD V 30-37

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Inauen VC999 07PF15 - Roller Vacuum Packaging Machine Brand: VC999 Inauen Model: 07PF15 Year of manufacture: 1992 Power: 10 kW Power supply: 400V / 50Hz (3-phase) Chamber dimensions: 940 x 450 mm Sealing bars: 2 x 450 mm Nwodpjxyrgtjfx Adhsp Sealing bar: 930 mm External dimensions: 1250 x 800 x 1100 mm Vacuum pump Brand: Rietschle Model: CLFH 220 Capacity: 220 m³/h The Inauen VC999 07PF15 roller vacuum packaging machine is a professional industrial device designed for vacuum packing products in film. Thanks to its 10 kW power and robust construction, this unit is ideal for packaging large batches of goods, ensuring their long-lasting freshness. The packer is equipped with a Rietschle vacuum pump (model CLFH 220), which provides high vacuum efficiency with a throughput of 220 m³/h, reaching an operating pressure of 0.50 mbar (abs.). The unit can maintain a working pressure of up to 6 bar, allowing for fast and efficient vacuum packaging. Additionally, the device's external dimensions are 1250 x 800 x 1100 mm, and the chamber size is 940 x 450 mm, ensuring ample space for packaging larger products. Two sealing bars, each 450 mm long, and an additional bar of 930 mm provide flexible adjustment for various packaging types. The VC999 packer is a reliable solution for companies involved in vacuum packaging, delivering high performance and reliability for long-term industrial operation.

Condition: excellent (used), Year of construction: 2021, operating hours: 4,975 h, functionality: fully functional, type of input current: three-phase, transport height: 1,894 mm, The Bergmann PS1400 is an intelligent compaction station, also known as a mini compactor, offering an alternative to traditional baling presses. Instead of compressing recyclable materials into bales, the PS1400-E compacts recyclables directly into a large plastic bag (approximately 1,400 liters) placed on a pallet. This system is ideal for environments with a continuous flow of recyclable material, such as distribution centers, supermarkets, or production facilities dealing with large volumes of packaging waste. As the machine utilizes a rotating compaction roller instead of an up-and-down compaction plate, the PS1400-E can process continuous streams of recyclables without having to pause for separate press cycles. You simply throw cardboard, plastic film, residual waste or other materials into the machine’s hopper. A powerful steel roller equipped with cutters grabs the material, shreds it, and compresses it down into the bag below. Nwjdpfx Asxyq Ayjdhop Continuous loading is possible – the feed opening can remain open while the roller turns, ensuring there is no waiting time. This continuous loading capability significantly increases processing speed compared to, for example, a baler (where you need to wait for the press cycle to finish and the door to reopen each time). The PS1400 is user-friendly: it features a simple start/stop button or can even operate fully automatically (on some models it starts when recyclable material is detected). Since recyclable material is neatly compacted into a sturdy PE bag, you are left with a compact “block” of recyclables on a pallet at the end. This package can be easily sealed and moved with a pallet truck or forklift. A major benefit is that the packed waste bales are clean and leak-proof, which allows you to transport them together with goods without risk of contamination. This is especially convenient in supermarkets or production facilities: the compacted waste bags can be sent back on delivery trucks, helping to avoid empty return trips. With the PS1400, you not only save storage space (up to 80% reduced waste volume is achievable, depending on the material), but also labor time. Staff need to make fewer trips to the waste container, and do not have to strap or lift bales—the waste bag is only replaced when it is full, which takes much longer. The machine is safe (equipped with emergency stop and secured access) and, thanks to its electric drive, operates relatively quietly. Maintenance is minimal: the rotating compaction roller is self-cleaning and the hydraulic system is robustly engineered. In summary, the PS1400-E provides a modern, efficient way to compact recyclables directly at the source into manageable packages, delivering significant logistic and cost advantages.

Condition: good (used), Welger Type: RC 660 Roller compactor with Brück suction Compact and fully automatic Used exclusively for producing pressed bales from low-density packaging materials. Application variants Press materials Paper edge trimming (strips and endless) Paper and film bags PP film edge trimming Film strips Clothing protection film (PP/PE films) PP/PE fiber material Insulating and nonwovens Foam mesh Packaging foam Tetrapak Length 2100mm, width 940mm, height 1755mm Dimensions of filling shaft 330 mm x 600 mm Bale format max. 400 mm x 600 mm Bale weight 20 - 30 kg depending on the material being pressed Press density 250 - 400 kg/m³ depending on the material being pressed Throughput daily output 30 bales / day Feed speed 0.36 m/s RC 660 3X 400V 50Hz 16A 2.2 kW 5.0A 700 kg Brück extraction Series: KFA Size: 60-30-3000 Air output: 6,000 m³/h Motor output: 0.3 kW Filter area: 30 m² Negative pressure: 3,100 Pa Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information is subject to change!) Nwsdpodtxbiofx Adhep We will be happy to answer any further questions you may have over the phone.

Condition: good (used), MULTIVAC T700 AUTOMATIC-TRAYSEALER Boost your packaging efficiency with the MULTIVAC T700, a powerful automatic tray sealer engineered for high-volume, industrial-scale production. Ideal for a wide range of applications—including food packaging, medical devices, pharmaceuticals, and consumer goods—this machine delivers consistent, high-speed sealing with precision and reliability. The T700 traysealer supports trays made of plastic, aluminum, cardboard, and foam-based materials, and it is compatible with a wide range of sealing films. Designed for seamless integration into production lines, this model ensures gentle handling of trays while maintaining optimal output speed and pack quality. Whether you’re packaging ready meals, fresh meat, seafood, or sensitive medical products, the T700 guarantees performance and flexibility with every cycle. Nwedpewinaqsfx Adhep Machine Features: Tool Included: Comes with 1 sealing tool (see photos for tray dimensions) Custom Tools Available: Additional tray sizes can be supplied upon request at competitive pricing SKIN Packaging Ready: Designed for premium product presentation and extended shelf life. Perfect for companies looking to scale up their packaging operations with a dependable, versatile tray sealing solution, the MULTIVAC T700 offers excellent ROI and lasting performance. Brand: Multivac Model: T700 automatic-traysealer (SKIN) Year: 2011 Productionhours: 9.625 Power Supply: 400/230 Volt Power: 4,2 kW Max. output in cycles/min: 20 Total machinedimensions (LxWxH): 490x100x210 cm Machine weight: 1.300 kg.

Condition: used, Tabletop banding machine (bundling machine) Band/roll width: 30 mm Nwjdpfexwxdmex Adhop Material: Paper from 70 g/m² or film from 80 µ (duplex film) Sealing: Heat sealing Frame size: 240 × 170 mm (WxH) Product size: Min.: 30 × 5 mm / Max.: 235 × 170 mm Output: approx. 26 cycles per minute Tension: infinitely adjustable (from soft to very tight) Power supply: 230 V / 50 Hz Machine dimensions: approx. 425 × 400 × 287 mm (WxHxD) Weight: approx. 28 kg

Condition: excellent (used), Year of construction: 2022, operating hours: 1,615 h, functionality: fully functional, Make Kiefel Model KMD 78.1 PR Year 2022 Condition Excellent Delivery date Immediately Approx hours 1615 Stations Four Max tool dimensions 780 x 600 mm Maximum forming area 760 x 580 mm Minimum forming area 375 x 350 mm Sheet thickness range 0.2 - 1.8mm Depth of draw 150 mm +/- Max film width 810 mm Cutting Station Force 500 kN Hole Punching Station Force 300 kN Operating pressure 6 bar Max dry cycles / min 40 Nwjdpfxoxwwf Nj Adhsp All details are subject to change and/or errors.All equipment is subject to availability and/or prior sale.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Nwjdpfxsxwuu Is Adhjp Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: excellent (used), Vivid Easymount EM-1650DH Manufacturer: Vivid Laminating Technologies Easymount EM-1650DH Laminator Description: For sale is a professional laminator Easymount EM-1650DH from Vivid Laminating Technologies. This machine is ideally suited for print shops, sign makers, or graphic studios, and enables high-quality double-sided hot lamination up to 1650 mm width. Overview & Applications: The Easymount EM-1650DH is a powerful, double-sided heated wide-format laminator designed for professional use in print finishing and sign production. It is excellent for: - Posters, graphic prints, signs - Mounting onto boards - Pop-up displays - Vinyl, adhesive films, and application tapes - Outdoor advertising and banners The machine enables both hot and cold lamination, as well as mounting work with double-sided lamination for precise results. Features & Benefits: - Professional-grade double-sided hot lamination - Robust industrial quality for daily use - Ideal for banners, posters, signs, roll-ups, displays, etc. - Also suitable for board mounting - Easy operation via clear digital panel - Compatible with all common 3" film rolls - Optional accessories available (e.g., take-up system, additional mandrels) Model: Easymount EM-1650DH Series: Code EM-1650 Max. Film Width: 1650 mm Model Type: DH = Double Hot (heated upper & lower roller) Suitable for: professional double-sided hot lamination Technical Specifications: Feature / Value Laminating speed: 6 m/min Laminating width: max. 1650 mm Max. material thickness: 25 mm Roll diameter: 130 mm Warm-up time: approx. 20–25 minutes Roller heating: Infrared (internal) Temperature range: 0–130 °C Control panel: Digital Pressure adjustment: Manual with display Film core: 75 mm (3") Dimensions (W×D×H): 1990 × 650 × 1255 mm Power supply: 220/240 V, 32 A, 3200 W Weight: 365 kg Condition: used Scope of delivery: (See image) (Changes and errors in technical data and specifications reserved!) Shipping: Pick-up preferred, shipping by freight forwarder possible upon request! For further questions, please feel free to contact us by phone. Nedpfx Adew Ebckjhswp

Condition: used, PANalytical PANalytical X’Pert PRO MPD X-ray Diffractometer (XRD) Excerpt from the service report: Device: PANalytical X’Pert PRO MPD Report date: 07.07.2021 Work performed: Nsdewycatopfx Adhswp - Reinstallation and commissioning of the system - Connection of external supply lines - Warm-up phase - Complete alignment of goniometer and additional components - Maintenance carried out, including replacement of defective parts Spare parts used: L 3.6V NC/U3 R15.0X52.0 BATTERY. NI-CD FAN FOR X-CELERATOR UNIT FILTER, WATER Motor PW3050 ("Device was not tested in-house") The X’Pert PRO MPD is a highly versatile and powerful X-ray diffractometer (XRD) designed for structural characterization of crystalline materials. It is ideal for pure research as well as routine applications in industry and academia. Thanks to its modular design, fast detection, and control of temperature and atmosphere, it is excellently suited for both routine analyses and complex in-situ experiments. Key features: - Multiple measurement geometries possible: - Reflection measurements in Bragg-Brentano (θ–2θ) mode - Transmission geometry for powders in capillaries - Optional SAXS (Small-Angle X-ray Scattering) for nanostructure analysis - Radiation source and detectors: - Typically copper anode (Cu-Kα, λ ≈ 1.54 Å) - X’Celerator detector (1D, ultra-fast) for parallel data acquisition - Modular system with PreFIX technology: - Rapid change of optics and sample stages without recalibration - In-situ measurements at high temperatures: - Measurements up to approx. 1200°C possible - Controlled atmosphere: air, nitrogen, oxygen (limited for reducing atmospheres) Typical applications: - Phase analysis and quantitative Rietveld refinement - Determination of crystallite size, microstrain, residual stress - In-situ investigation of phase transitions, oxidation, crystallization, etc. - SAXS measurements for analysis of nanoparticles and pore structures - Broad range of sample types: powders, thin films, ceramics, pharmaceuticals, catalysts, and more Technical data (typical) Property & Specification Angle range (2θ): approx. 0.5° to 150° Step size: up to 0.002° or finer Goniometer: vertical, 0–0, radius approx. 240 mm Temperature range: room temperature up to approx. 1200°C Atmosphere: air, N₂, O₂ (limited for reducing atmospheres) Detectors: X’Celerator (1D), proportional counter Distribution & application areas: The X’Pert PRO MPD is in use worldwide at, for example: - Universities (ETH Zurich, TU Dresden, University of Vienna) - Research institutes (e.g., Max Planck Institutes, ICN2, IS2M) - Industry (e.g., materials development, pharmaceuticals, chemistry) Condition: used Scope of delivery: (See image) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: used, Nirox Sensor Nirox multi-Thick-MS1-CH1 Nirox multi-Thick-MS1-CH1 – Sensor for Multi-Layer Thickness Measurement For sale is a high-quality optical sensor of the type Nirox multi-Thick-MS1-CH1, designed for precise, non-contact measurement of multi-layer materials such as plastic films, composites, or coated substrates. This sensor system is ideally suited for quality control in the plastics or packaging industries. Technical highlights: Model: multi-Thick-MS1-CH1 Manufacturer: Nirox s.r.l. (Italy) Function: Optical precision sensor for micrometer-accurate layer thickness measurement Measuring method: A-Scan / optical interference analysis Channel: 1 (CH1) Fields of application: Inline measurement in production lines or for laboratory use Typical materials: Multi-layer films, coated glass, technical laminates Condition: used Scope of delivery: (see image) Sensor multi-Thick-MS1-CH1 Nsdpow Elmysfx Adhewp Connection cable (Subject to changes and errors in technical data. All information is provided without guarantee!) If you have any further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2022, Robopac Model Robot M80 FRD PLUS, Year of manufacture: 2022 For sale is a high-quality self-propelled stretch wrapping machine from Robopac, Model Robot M80 FRD PLUS. The machine is fully operational, ready for immediate use, and ideal for wrapping palletized goods – with no need for a fixed installation site. Its mobile design enables efficient securing of even large and bulky loads. Technical data: Model: Robot M80 FRD PLUS Power supply: 100–240 V / 50–60 Hz / 1 phase Power consumption: 0.3 kW Current consumption: 1.7 A Film carriage: FRD – manual film tension Max. pallet height: up to 2,400 mm Battery: 2 × 12 V – sufficient for up to 150 pallets per charge cycle Operation: Intuitive display with adjustable programs Special features: Fully mobile – no fixed wrapping station required Ideal for logistics, warehousing, production, or shipping Very easy to operate – suitable for untrained personnel Collection & Shipping: Shipping on pallet possible (costs on request) Inspection possible by appointment at any time! Nwsdpfew Eaqtox Adhsp Scope of delivery: Robopac Robot M80 FRD PLUS Integrated battery Charging cable / power connector Machine weight: approx. 292 kg Condition: used Scope of delivery: (see picture) (Specifications and details are subject to change and error!) If you have any further questions, feel free to contact us by phone.