Used Biomass Pellet for sale (360)

Condition: used, Ražotājs: Munch Modelis: 420 Ražîba: 1 tonna stundā Elektrojauda: 2x75 kW Diametrs 420 mm Komplektā ar dzesētāju pēc kapitālā remonta clear Hfedewfqn Aspfx Afijn 134 / 5,000 Translation results Translation result Manufacturer: Munch Model: 420 Production: 1 ton per hour Electric power: 2x75 kW Diameter 420 mm Complete with cooler after overhaul

Condition: used, The company sells pellet production line and Spe Renergi low-temperature wood chip dryer/kiln PELLET PRODUCTION LINE CAPACITY 6 t/h | CPM, Fisker, Mogensen A fully assembled and working pellet production line with a capacity of up to 6 tons per hour is for sale. Ideal for professional production of pellets from wood biomass, agrobiomass or other raw materials. The line includes: • CPM Championdry hammermill. • 2x CPM Pressess • Fisker (Essegi F1200) branded new fullautomation packaging line • Mogensen vibro sieves • Vecoplan / CPM wet wood chip milling station • Transporters / feeders Additional searparts are available – matricas, rolls, etc. Main advantages: • Large production capacity – up to 6 t/h. • High quality components from European manufacturers. • Line in working order – can be demonstrated in operation. • Available immediately. The equipment is located in Sweden and, upon prior agreement, it is possible to view and test it in person. Price: 400,000.00 EUR (VAT is not included) Hodjwp Rqfspfx Afijfn SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 30,000.00 EUR (VAT is not included)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, power: 75 kW (101.97 HP), For sale: fully operational pellet production line. Hsdpfxew Ry U Ie Afijfn

Condition: excellent (used), Year of construction: 2010, 153 USED PWSB Bakery Oven, Wood-Fired, Pellet-Fired. Year of manufacture: 2010. TECHNICAL DATA: - Number of chambers: 3, - Ceramic-lined baking chamber, - 6 pellet burners (2 per baking chamber). EXTERNAL DIMENSIONS (in cm) - Width: 300, - Depth: 400 (including burners) - Height: 290, Pellet hopper: - Capacity: approx. 8-10 tons, - Height: 700, - Diameter: 270 cm. CHAMBER DIMENSIONS (in cm) - Width: 180, - Depth: 200. Hodpjxfkx Eofx Afiefn We offer devices in various technical conditions and prices: 1. Directly from the bakery. 2. After inspection with a commissioning warranty. 3. After renovation with a 6-12 month warranty. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: refurbished (used), functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, High-Performance Pellet Mill – Available Immediately! We offer a fully refurbished pellet mill in excellent condition, ideal for both laboratory and production applications. This machine combines quality, safety, and ease of operation. Technical Data: • Motor: 15 kW / 400 V (three-phase) • Maximum current: 63 A • Die type: Vertical • Die diameter: 200 mm • Maximum die thickness: 35 mm • Die hole diameter: 3–20 mm • Number of rollers: 2 units • Roller diameter: 96 mm Performance: Hfedpfow R Rtuex Afien • Softwood: 150–180* kg/h • Hardwood: 120–150* kg/h Weight: 1,050 kg Dimensions (mm): Length 1,590, Width 1,200 Height (mm): 2,200 Condition: Excellent condition, primarily used for laboratory testing. Refurbished for sale purposes. Scope of delivery includes: • Shear pin and reinforcement ring for press protection in case of overpressure • Die and rollers • Miscellaneous accessories Extras (not included in the price): • Transport of the press • On-site training and commissioning • Pelletizing test with your own material

Condition: like new (used), Year of construction: 2024, functionality: fully functional, power: 110 kW (149.56 HP), Complete Refurbished Amandus Kahl C35-780 Pellet Press Production Line. The C35-780 pellet press itself has been recently refurbished with a full documentation of the all the new parts available, with one of them included in the pictures. Hjdpfsxd U Izox Afijfn The production line includes: - Amandus Kahl C35-780 Pellet Press - The Pellet Press has a new 110 KW engine - Electrical cabinet with emergency stop including complete electrical documentation - Conveyor belt - A sieve system that sieves the pellets and automatically cools them - Hydraulic nut - A roller head in perfect condition, - Electrical wiring included. - A feeding screw that brings the product to the Pellet Press - Dispenser system that automatically measures the number of pellets to release for e.g. a big bag. - 4 additional die's of 6 mm - 60 liters of extra synthetic oil List of refurbished parts: - 7 new bearings - 2 new wear rings - 1 new air filter - 2 new oil seals - 1 new oilfilter - 1 new oil pump - 20 liters of 800/460 Syntethic Oil - 1 New Pressure Piece Main Shaft

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 19,000 h, Munch Pellet Mill with 2 only 200 hp motors (total 400 hp) electric controls and 60 hp centrifugal cooling fan also second 2011 model 650 pellet mill and 2 skids of new rolls and dies and spare parts. Second mill 2011 has no motors. It is working machine ready for use in case 2012 machine had problem. Hodpfx Afexc Nt Noisfn

Condition: used, For sale: Salmatec Maxima 700 pellet press in full working condition, installed in a Rematec container with electrical cabinet and a tent shelter. Capacity – up to 3 t/h. The line includes: - Press and hammer mill: Salmatec – reliable German quality with high efficiency and durability. - Conveying and dosing equipment: Rematec – robust and precise material handling at every stage. - Additional equipment: cyclones, sieves, cooler, control cabinet, etc. Hodpfxeit I Rts Afisfn - Tent shelter. Key advantages: - High production capacity – up to 3 t/h. - High-quality European manufacturer components. - Suitable for professional pellet production from wood biomass, agro-biomass or other raw materials. - Fully operational line – demonstration possible. - Available immediately. Dismantling and transport are to be arranged by the buyer. We can recommend a company to assist with this process. The equipment can be inspected in full working order in Sweden. All foundation drawings and DWG files are available. Price: EUR 650,000

Condition: used, Granulation and packaging line. Model: HM700E PRO 11KW Year of manufacture: 2022 It includes: Hammer mill - shredder Chip mixer Chip feeder Granulator Vibrating table Product feed belt (conveyor belt) Pellet hopper with packaging equipment Bag sealer and chip moisture meter Hammer mill with cyclone Motor: 11 kW / 400 V Productivity: 300 - 700 kg / h Weight: 360 kg Soft start installed Cutting system 16 hammers Chip mixer: Volume: 1.0 m³ Chip feeder: Motor: 3.3 kW / 380V Feeds up to 800kg / h Granulator: Motor: 22 kW / 380V/50hz; Productivity: 300 - 700 kg/h Weight: 590kg Soft start installed Vibrating table: Weight 90kg Product feed belt (conveyor belt): Dimensions: 5m × 0.4m. Automated packaging equipment: Dimensions: 1, 90x2, 50x2, 30 Volume: 1.5m³ Packing in bags: 1 - 50kg Equipped with two types of scales Hfodpfx Afoxcy D Eeisn Bag sealer 220V Moisture meter

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 765, height adjustment type: hydraulic, type of input current: three-phase, ambient temperature (min.): 12 °C, ambient temperature (max.): 40 °C, total height: 1,635 mm, overall weight: 3,900 kg, power: 110 kW (149.56 HP), input voltage: 400 V, Equipment: documentation/manual, The Amandus Kahl 38-780 pellet press was manufactured and purchased from the manufacturer in 2016 and is designed to produce 6mm diameter pellets from wood waste and other plant waste. Installed in a line for demonstration production of wood pellets. The granulator is supplied as a set of: 1. Amandus Kahl 38-780 pellet press with automatic granule density adjustment system Use conditions: ambient temperature Press: 0 to + 40 °C Includes: - Dismountable cast housing, equipped with cooling ribs in the gearbox area - Dust cap and inlet cap with product distributor - Main shaft with axial and radial bearing support - Runner head with roller runners made of flame-hardened steel - Spacer rings - Unloading device - Auger transmission operating in an oil bath, auger wheel made of special bronze, hardened auger shaft - V-belt fan pulley - Oil pump for lubricating main bearings, with oil filter, pressure switch and thermometer - Tool box with special tools Press drive - granulator consisting of: - Three-phase motor on legs, (IE 2) power: 110 kW - Tension tires - V-belt pulley - V-belt - V-belt protection - execution in the form of a steel structure, side walls with grates and special deflectors, required for cooling the press Central lubrication of runners for lubrication of runner bearings during press operation consisting of: - Lubricant distributor, with a system of pipelines and couplings - Hose with a central lubrication nipple - Unit of grease lubrication pumps with a tank, motor pump, safety valves - Control device and control unit Hydraulic system of the granulator press for stepless change of the gap between the roller runners and the matrix, as well as for quick and easy release of the runner head Using conditions: ambient temperature 12 to + 40 °С - Hydraulic unit consisting of: - Hydraulic nut with corrosion-protected sealing surfaces, with sealing rings laid in grooves, flat hinge and spacer rings - Hydraulic motor pump with electric control box for adjusting the hydraulic pump and hydraulic valves with an on-off button, control voltage of the high-pressure hose, couplings and pressure limiting valves 2. Mixing auger M 315 For mixing and preparing raw materials consisting of: - Pipe body with a service cover, including inlet and outlet openings - Auger shaft with progressive suction and mixing blades - End shields with rolling bearings and seals - Device for spraying liquids using a double-sided nozzle - Hinged joint for turning the auger from the press - Overhead gearbox, power: 5.5 kW 3. Water dosing system in composition: Water dosing system, type WD GLI 15 - capacity: 10-100 l/h at a back pressure of 36 bar Consisting of: - Dirt trap - Magnetic shut-off valve - Reducer made of cast tin-zinc bronze with a pressure gauge - Flexible metal hose - Inductive flow meter 4. Flat matrix Material: AKN 13 Perforation: 6 mm 5. Flat matrix for soft wood Material: AKN 13 Perforation: 6 mm 6. User manual, other documentation ALSO Hjdpfxjxcv Dzj Afiefn FOR SALE: COMPLETE PELLET PRODUCTION LINE A fully operational pellet production line is for sale. This is a turnkey solution ready to start production immediately. Key Specifications: Productivity: 160 tons/month Pellet Density: 1.24 kg/dm³ Installed Power: 352 kW Heat Generator: 1 MW (thermal energy) Final Product: High-quality 6 mm fuel pellets

Condition: used, Used 2 MW wood biomass power plant built in 2009 and running until February 2023. Plant is made up of a steam boiler that uses forest waste as fuel and a condensing steam turbine generator, electrical room, control room. Hedew U A Hhepfx Afiefn Main equipment includes: - Biochamm BCV-11.0000 CA biomass boiler built in 2008 with approximately 23,665 hours of use. - Boiler feed system made in 2008 with approximately 22,549 hours of use. - Atlas Copco compressors made in 2008. - Water treatment plant made in 2008. - Hamworthy condenser made in 2008 with 22,539 hours of use. - Siemens SST-110 (TWIN AFA46 GT6) steam turbine made in 2008, with 22,539 hours of use and 563 starts. - Leroy Somer L57 54 m7/41 alternator made in 2008 with 22,539 hours of use. - EWK cooling towers made in 2008 with approximately 23,102 hours of use. - Fivemasa HVAC made in 2008. Available for relocation or in-situ with land and buildings.

Condition: new, Year of construction: 2024, functionality: fully functional, power: 132 kW (179.47 HP), input frequency: 50 Hz, Equipment: CE marking, air conditioning, Brand new, unused pellet press, year of manufacture 2024!\n\nTECHNICAL DETAILS\n\nRaw material processing: grass, rice husks, wood sawdust, biomass, straw, cotton stalks\nOutput: 1,500 – 2,000 kg/h\nPellet diameter: 6 – 12 mm\n\nMACHINE DETAILS\n\nMain motor power: 132 kW\nVoltage: 3 phase, 380 V, 50 Hz\n\nDimensions & Weight\nDimensions (L x W x H): 2,600 x 1,300 x 2,300 mm\nWeight: 4,500 kg\n\nEQUIPMENT\nFully automatic control cabinet\nAir conditioning\nAutomatic bearing lubrication system\nRoller and new ring die (6 mm) for sawdust\nCE & ISO certification Hedpfxoxclitj Afiefn

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total height: 2,070 mm, total length: 2,000 mm, total width: 1,200 mm, overall weight: 600 kg, Comafer K100, output 100 kg/h. 6mm pellets, chips with 8-12% moisture content. Material is ground by a mill to the appropriate fraction (5.5 kW), then fed by a screw conveyor into a ring die pellet mill (7.5 kW) where it is compacted. The process is fully automatic, controlled from an electrical control cabinet. Very high pellet quality. Hedpfxow Hngls Afiefn

Condition: new, Year of construction: 2024, operating hours: 12 h, functionality: fully functional, input voltage: 380 V, 1. Material feeding table with moving chain mechanism. Height adjustable: min 0.8m, max 1.4m, equipped with electric drive. 3kW, length 4m. 2. Large roller shredder with double blades, blade diameter 1.8m, depth 1.9m. 380V, 30kW. 3. Connection point with locking mechanism for bulk material feeding to the crushing mill. 4. Hammer mill turbine, 380V, 35kW. 5. Mixer for crushed raw materials, with adjustable feed hatch. Volume: 4.8m³, 380V, 2.2kW. 6. Large horizontal granulator with automatic lubrication system and programmable rotor automatic lubrication. Includes additional cooling for granulator rings and fine dust extraction. Maximum capacity 3T/h, 380V, 90kW. 7. Small mobile conveyor belt. Width 38cm, length 2m, 380V, 0.5kW. 8. Large transport conveyor with head valve. Width 38cm, length 6m, 380V, 1.5kW. Hfjdpfxsw U Ugms Afien 9. Pellet cooler with cyclone for fine dust collection and head valve. Maximum capacity 3.5T/h, 380V, 3kW. 10. Screener/vibrating table with screenings collector and screw feeder. 380V, 1.5kW. 11. Long rotary drum screener with screening mesh. Length 3m, 380V, 1.5kW. 12. Conveyor belt for feeding to packaging. Length 4.2m, 380V, 0.75kW. 13. BIG BAG packaging unit with calibrated scales (accuracy +/- 5g per 1T). 14. Screw conveyor for feeding material to the automatic bag packing machine. Length 5m, diameter 27.5cm, 380V, 3kW. 15. Automatic packaging machine with bag sewing and PVC bag sealing functions. Includes automatic labeling conveyor. Maximum capacity 4.2T/h, with air compressor. 16. New electric forklift, 2.5T, triple mast, low lift, with enclosed cabin.

Year of construction: 2017, operating hours: 35,000 h, condition: excellent (used), functionality: fully functional, Equipment: CE marking, Machine in perfect working order, in container, can operate outdoors. Electrical power of 50 kW, thermal power of 100 kW. Runs on wood chips with 12% moisture content. Hfsdpfx Aew Uihlefijn

Condition: used, Year of construction: 1985, functionality: fully functional, For sale: granulator from the renowned manufacturer Buhler. Hfedpfjw Uh Nzsx Afijn Granulator model: DPAA-660 Motor power: 160 kW – option to install a more powerful motor – 200 kW. Die diameter: 660 mm, Die working width: 160 mm, Granulator output on straw / sawdust: 2 – 2.5 t/h The granulator is currently dismantled. For a committed buyer, we will assemble it using new wear parts. Contact for more photos and details. Machine available for inspection in Sępólnie Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Condition: used, Used Heat & Control pellet frying and seasoning line made in 1992 with capacity of approximately 450 kg/hour. Used for corn chips, pellets, snacks. Main equipment includes: Hedjw U A E Ropfx Afiefn - Hopper and feed conveyor - Heat and Control fryer with deoiling belt - Flavour drum - Gas powered oil heater and oil pump. More information to follow.

Condition: like new (used), functionality: fully functional, A Rollerhead and Hydraulic nut for the Amandus Kahl C35-780 machine in perfect state, these parts have only been used for a year to produce sawdust pellets. Rollerhead: €7500 Hjdpjw Uafnjfx Afisfn hydraulic nut: €4000 If bought together: €10,000

Condition: used, Year of construction: 2009, operating hours: 1 h, machine/vehicle number: -----, Business Relocation – High-Quality Pellet Production Plants for Sale! For years, we have been recognized as one of the leading manufacturers of premium pellets. Due to the relocation of our production site to our main plant premises, attractive opportunities now arise for companies in the wood and pellet industry: We are offering you the chance to acquire our currently operational production plants for manufacturing A1plus grade pellets. Your Benefits • High-quality machines and equipment currently in operation • Ideal for producing premium-grade A1plus pellets • Facility visits possible during ongoing production until mid-October 2025 • Attractive conditions for prompt purchase • On-site inspection & consultation Interested parties have the opportunity to see the equipment in operation on site and gain a comprehensive impression of the condition and performance of the machinery. For initial orientation, we provide you with informative photos of the machines. Upon request, we are happy to send you detailed technical specifications and provide individual consultation. Hedpfxew Tdk So Afiofn For further information or to arrange a viewing appointment, please do not hesitate to contact us:

Condition: excellent (used), functionality: fully functional, height adjustment type: electric, power: 90 kW (122.37 HP), input voltage: 380 V, Ready for work. Maximum capacity from the manufacturer 1.5T/H Hfodsw Ulq Aopfx Afion

Year of construction: 2002, condition: ready for operation (used), A horizontal La Meccanica pellet press for animal feed, wood pellets or cellulose-containing products without motor and sensors is available. Production capacity chicken feed: approx. 8t-12t/h, production capacity turkey feed: approx. 4t-8t/h, die inner diameter: 630mm, working width: 240mm, machine dimensions X/Y/Z: approx. 2500mm/3500mm/2500mm, weight: approx. 6500kg, operating hours (estimated): approx. 130000h. Documentation available. On-site inspection is possible. Hfodpfx Afewufz Nsijn

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, power: 75 kW (101.97 HP), Complete pelletizing line consisting of: - Pellet press OGM 1.5 - Hammer mill - Cyclone - Cyclone with fan - Screw conveyor - Material silo - Material mixer for pellet plant - Elevator - Pellet collector Hodpfx Afsw Rmpfoiefn - Control cabinet - Pellet cooler TECHNICAL DETAILS Capacity for wood: 1 tonne/hour Capacity for straw: 1.5 tonnes/hour Die for sawdust: 8 mm Elevator height: 6 m MACHINE DETAILS Pellet press OGM 1.5 rated power: 75 kW Hammer mill rated power: 55 kW Cyclone with fan rated power: 11 kW

Year of construction: 2011, condition: like new (used), Please notice that the entire factory with land and buildings is for sale! List of devices for the pellet production line No. 1 (with a drying line) Hfedpfx Afoim I Rueion No. Device name set. Description DRYER LINE: - bale feeder - length 9m - Rotogrin RSC B 36-132 shredder - chain scraper of wet raw material - length 12m - V500 wet raw material screw conveyor - 4 kW - drying cyclone with a rotary dispenser - 4 kW - dryer exhaust fan - 55 kW - a stove with an emergency chimney - 2.2 kW - SBP-2500 dryer drum - 5.5 kW - fuel dosing system with a container + burner - 5.9 kW - ignition detection system - extinguishing system - electrical installation, sensor system, wiring - control cabinet and automation Passat straw chopper 3 x 15 kW Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan 4 bar Buffer tank with feeders Conditioner ANDRITZ CM 1101 11 kW, 750 rpm Granulator PM 30 ANDRITZ 315 kW, 1500 rpm Automatic Roller Lubrication System Pellet cooler MOGENSEN G 1014 Screener A set of transport routes for the production line (pneumatic feeders, scraper and bucket conveyors MINIMAX spark detection system with control unit Control panel with software Power and control cabinets, wiring List of devices for the pellet production line No. 2 No. Device name set. Description Bale feeder - Length 9 m Rotogrin RSC B 36-132 chopper Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan - 4 bar ANDRITZ CM 1101 conditioner 11 kW, 750 rpm Granulator PM 30 ANDRITZ + lubrication system - 315 kW, 1500 rpm Pneumatic feeders from the hammer mill to the filter Power and control cabinets, wiring

Year of construction: 2018, condition: ready for operation (used), A complete Heat and Control line for frying extruded snacks is available. Components: Product feeding system, vibration system for product feeding and particle removal, deep fryer, filter for removing burnt particles, oil heating system with burner, oil tank, oil return system, chimney, control cabinet. Frying capacity: 500kg/h, total system length: approx. 10000mm, total system height: approx. 3500mm. Including spare parts. Documentation available. On-site inspection is possible. Expected to be available from August 2025. Hedjwdwy Nspfx Afisfn

Year of construction: 2007, condition: ready for operation (used), A Selmatec pelleting press (ring die press) for biomass is available. Motor power: 15kW, die diameter: 360mm, die thickness: 40mm, working width: 40mm, rollers: 2, bearings: spherical roller bearings, throughput: approx. 500kg/h. Documentation available. On-site inspection is possible. Hedpfxewzld Re Afiefn