Used Beveller for sale (512)

Condition: used, mileage: 20,553 km, power: 260 kW (353.50 HP), first registration: 09/2023, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, Equipment: ABS, air conditioning, parking heater, Almost new municipal winter service truck Mercedes-Benz Arocs 2235 4x4 all-wheel tipper with 22 t gross vehicle weight, Meiller three-way tipper and Meiller winter service hydraulics, front mounting plate, additional winter service lighting, heated windscreen, differential locks on front and rear axles, automatic transmission, automatic climate control, reversing camera, and much more. German one-owner vehicle with only 20,553 km (odometer), new service performed by Mercedes-Benz in 10/2025. Wheelbase: 3,900 mm Unladen weight: 10,328 kg Payload with 18,000 kg gross weight: 7,672 kg Payload with 22,000 kg gross weight (winter service): 11,672 kg Weight variant 20.5 t (9.0/13.0) Permitted gross weight during winter service: 22,000 kg Winter service front axle load increased: 10.5 t Front axle: 9.0 t straight, Rear axle: bevel gear 300, planetary design, 13.4 t Front leaf spring: 10.5 t, 3-leaf; Rear leaf spring: 13.0 t Winter service hydraulics by Meiller for plough and spreader Front mounting plate with hydraulic connections Winter service lighting Heated windscreen M-driver’s cab ClassicSpace with rear window Additional heat insulation Engine: OM936, R6, 7.7 l, 260 kW (354 HP), 1400 Nm, Euro 6 E Drive: 4x4 Differential lock front and rear axle Axle ratio i = 4.143 Meiller 3-way tipper, approx. 4.60 m long x 2.42 m wide Bulkhead height: 800 mm Side walls: 600 mm high Removable aluminium side wall extensions +400 mm Lashing pockets in tipper body floor Automatic transmission G 211-12/14.93-1.0 Mercedes PowerShift 3 Transfer case VG 3000-3W, 1.04 selectable PTO via engine power take-off Automatic climate control Auxiliary heater – hot water additional heating Tow hitch Maul Ringfeder D40 with air brake connections Tipper hydraulics connections at rear Towing capacity: 30,000 kg Gross train weight: 40,000 kg Front and rear leaf suspension Front and rear axle stabilisers Electric braking system with ABS and ASR High Performance Engine Brake Drum brakes Predictive Powertrain Control Cruise control Engine brake Reversing camera Sun visor 290 litre tank LED daytime running lights LED rear lights Fog lights 2 rotating beacons to the rear, above the cab roof Rear work lights Exhaust raised behind cab Electrically adjustable and heated exterior mirrors Electric windows Comfort driver’s air-suspended seat Central locking with remote control Last Mercedes-Benz service performed in 10/2025 German one-owner vehicle Meticulously maintained and as-new condition Price NET plus 19% VAT. Attractive financing options available upon request. All details without guarantee. Errors and prior sale excepted. Internal vehicle number: 2577 Iiodpfexlwnasx Afijh

Condition: new, overall weight: 10,500 kg, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length! , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Iodpfxoxghums Afisih

Condition: ready for operation (used), Year of construction: 2005, A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible. Iisdpfx Afjxltu Njish

Condition: ready for operation (used), Year of construction: 1988, SARATOV 5C280P Spiral Bevel Gear Generator -2 machines Max gear diameter 800 mm Max module 16 Max gear ring width 125 mm Number of theet 5-150 Spindle speeds range 20-125 rpm Ijdpfx Afoum Ez Rjieih Main motor power 7,5 kW Overall dimensions LxWxWxH 3170x2180x2200 mm Weight 15 t

Condition: like new (used), Year of construction: 2023, operating hours: 250 h, functionality: fully functional, Tig welding/cladding machine, CNC control, automatic control, 5-axis simultaneous movement. Fronius units, table from 1.5meters, vertical & horizontal Pre-Set Programmable, easy operation control panel. Friendly interface. Isdpfsvl Ewmsx Afijih Overlay welding for Ball, Valve, Flange face, RTJ groove, Bevel etc. One touch, More Welding Solutions, New stocks for sale!!

Year of construction: 2011, condition: excellent (used), functionality: fully functional, X-axis travel (longitudinal axis) 4300 mm Y-axis travel (transverse axis) 270 mm Z-axis travel (vertical axis) 300 mm Electrospindle 1 HSD - max 18000 rpm - power 5.5 kW Ijdpsvi N H Tefx Afioih Tool magazine capacity 8 Bevel gearbox for lateral machining Number of vices 4 Vices positioning: automatic Weight 1950 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, edge thickness (max.): 10 mm, overall weight: 1,980 kg, height adjustment type: electric, Biesse Type Akron 440 Year of manufacture: 2007 Noise rating according to manufacturer: 88 dB (A) Rated power: 13 kW Extraction capacity according to AUVA: 565 m³/h Technical specifications: - Edge thickness from 0.4 - 10 mm - Feed speed 12 m/min - Max. edge banding height 13 - 60 mm - Release agent - Jointing unit - Edge magazine - Preparation for PUR adhesive - Trimming unit, pivoting 0-15° - Pivoting bevel/radius unit RS-501 - Profile trimming unit Ijdswahhpjpfx Afieih - Radius scraper RBK 502 - Flat scraper RCC 701 - Buffing unit SP 501 - Electric height adjustment - Total connected load 13 kW - Machine length 4200 mm

Condition: new, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,700 mm, loading space width: 2,480 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 400 mm side walls, steel side walls HOT-DIP GALVANIZED, with central stake on the side, plug-in, chassis: hot-dip galvanized, wooden floor, 14 lashing eyes in the outer frame, bevelled at the rear, 2 x ramps each 3,000 mm long x 725 mm wide, ramps with spring lifting mechanism, ramps with gratings also available in wood!, Loading height: 880 mm, , Also available in loading area length 7.20 m, available for immediate delivery., , Rental price from 580 euros, , --  Subject to printing errors, mistakes and changes, Sample images --, More data at: !, More details: ! Ijdexghuyjpfx Afijih

Condition: new, Year of construction: 2025, Number of motors 2 Stück 0 3000 mm Control ja/CNC loading dimensions L x W x H 4000 x 1500 x 1500 mm Weight 800 kg HECHT double miter saw Exenso DS350E - 3000 mm ----- For wooden glass strips, rungs, profile strips, aluminum strips, etc. Pos. 1.1 Article number 942.5103 1 piece HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inside) to 135° (outside) - Right head movable - Saw blade holder Ø 350 mm - Incl. 1 piece center support. - Units clamped pneumatically. - Positioning control Exenso DS3 with touch panel 15" display in dust-proof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Entering the cutting data by hand - Processing data from a cutting list (data set according to specification) - Processing measuring rod data (GMF wireless caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface - Incl. control cabinet, motor and software licenses. Item 1.2 Item number 723.0121 2nd DS saw blade wood Bevel/bevel/flat tooth - positive Item 1.3 Item number 942.5236 2 sets of DS workpiece clamping combined Combined workpiece clamping consisting of: Pneumatic swivel clamp - for clamping the material from above. (Free access to the work table) Pneumatic horizontal clamp - anti-twist clamping cylinder with pressure piece. The clamps can be selected individually via the saw control. The clamping sequence can also be set via the control. Including safety pre-tensioning pressure Scope of delivery for 2 sets: - 2 pieces (left/right) vertical swivel clamps. - 2 pieces (left/right) horizontal clamps. Item 1.4 Article number 942.5997 DS pneumatic feed device Item 1.5 Article number 945.2007 Packaging DS350 (transport frame) ----- Total price in this version - on request! ----- ALTERNATIVE options, prices on request! ----- For horizontal clamping of the remaining pieces with blunt glass strips instead of the 2nd set Item 1.3 943.5236 DS workpiece clamping combined! Pos. 2.1 Article number 942.5201 ES / DS workpiece clamping from the front - 2 clamping cylinders with anti-twist protection - 2 cylinder holders with clamping lever ----- For rebated glass strips, instead of standard panels without a groove: Pos. 2.2 Article number 942.5241 DS350 table supports grooved according to customer sample The assembled table supports are milled according to the customer's drawing. Please send us all profile drawings that are to be sawn (pdf, dxf and hand samples) ----- Iedpfx Aovzt D Tefioih If, for example, aluminum is also to be sawn: Item 2.3 Article number 942.5203 DS hydropneumatic feed device (instead of pneumatic feed cylinder) ----- OPTIONAL accessories, with additional charge on request: ----- Item 2.4 Article number 942.5237 DS "Excess length" software (subsequent steps must be confirmed) Sequence control including hardware. After entering a cutting dimension > max. cutting length of the system, the cutting is carried out in a cyclical manner. (Left unit cuts, right unit moves the material and cuts to size.) ----- Item 2.5 Article number 944.1023 GMF caliper 3000mm complete set (1500mm plus extension 1500mm) incl. charger and receiver. A robust aluminum measuring rail with a measuring ran...

Condition: ready for operation (used), Year of construction: 2013, Tools Max tool length 5760 mm Additional Equipment Joining Unit: 2 x 2.2 kW 200 Hz Gluing Unit: A12 Snipping Unit: Chamfer/Straight 2 x 0.35 kW Pneumatic Adjustment for Bevel/Straight Cross-Cuts Pneumatic 2-Point Adjustment for Cross-Cuts Pre-Milling Unit: 2 x 0.55 kW O degrees Pneumatic 2-Point Adjustment Multifunctional Shaping Unit: 2 x O, 4 kW Profile Scraper with Quick-Change Heads Pneumatic Adjustment Scraper Blade Iedpfexfw A Rsx Afieih This BRANDT KDF 650 Highflex 1650 edgebander was manufactured in 2013. Ideal for precise edgebanding applications, it ensures reliable performance for woodworking professionals. Consider the opportunity to buy this BRANDT KDF 650 Highflex 1650 edgebander. Contact us for more information. Application Types Edge Banding

Condition: ready for operation (used), MGM Omnicut 3100 – CNC cutting machine for plasma and oxy-fuel cutting High-quality CNC cutting machine, ideal for high-precision plasma and oxy-fuel cutting of structural steel, stainless steel, and non-ferrous metals. — Technical Specifications • Machine type: CNC cutting machine • Model: Omnicut 3100 • Working area: 2,000 × 4,000 mm • Required floor space: 6,500 × 3,500 mm • Maximum positioning speed: up to 20 m/min • Positional accuracy: high precision in cutting and positioning • Programming software: SAPSproW standard version, with optional upgrade for bevel or drilling technologies Axes & Drives: • X-axis: robust H-beam design with precisely ground rack and pinion • Dual-sided drive on the X-axis for maximum stability and durability • Y-axis: maintenance-free linear guides, suitable for both light and heavy equipment • AC servo drives controlled via frequency converters, maintenance-free Cutting Technologies: • Oxy-fuel: Electric torch carriage with capacitive height control system • Plasma: Electric torch carriage with programmable height control system • Supports additional technologies such as bevel torches and drilling units — The machine is in excellent condition and ready for immediate use. • Inspection at any time • Loading and transportation can be organized without difficulty — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Iijdjxk Trropfx Afieh 📞 All prices are plus VAT. Subject to prior sale and errors.

Condition: new, functionality: fully functional, We offer a high-quality low-speed pellet granulator. The pellet mill is 100% manufactured at our ECOMAS Polska Czernikowo facility. We guarantee equipment engineered for continuous 24/7 operation. Our machines produce pellets that comply with EU standards—properly compacted, free from harmful additives, and with a calorific value of at least 4.6 kWh/kg. The main advantage is the use of modern, hardened dies and rollers (60HRC+), manufactured using CNC technology. Our dies ensure high output, low energy consumption, and long service life for both dies and rollers. Ijdpfx Afoxk Ta Njijih Another benefit is the main shaft lubrication system featuring oil and oversized bearings, which significantly reduces wear! Are you struggling with your current granulator—frequent bearing failures, low efficiency, die blockages, high energy consumption, fast wear of parts, etc.? With our machines, these problems are eliminated. We provide a tailored approach to every customer! See our machines in action by searching YouTube for: ecomas_polskie_peleciarki Available power options: 7.5kW, 11kW, 15kW, 18.5kW, 22kW, 30kW, 37kW, 45kW, up to 55kW. Configuration: - Complete head with 2/3/4/5 rollers on cylindrical bearings - Welded body—completely filled with Orlen Oil Transol VG 320 - Cylindrical-bevel gearbox (98% efficiency) - Base frame - Bolted dies: Ø230, Ø260, Ø285, Ø310, Ø400, Ø520; hole diameters: 3, 4, 5, 6, 8, 10mm (100% stability, easy disassembly, and temperature control) - Standard oil tank or optional tank with pump and oil system (oil lubrication, easy oil change) - User manual - 12-month warranty The buyer receives a comprehensive operating manual and a one-year warranty. We offer full warranty and post-warranty support. Prices listed below in the attached PDF file. *Product and technical solutions are protected.

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Maintenance-free, coated glue pot HF - cross-cut station (16,000 rpm) for front and rear edge overhang HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Surface scraper 1 unit with pneumatic engagement control Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance Iiodpjxfh Tmsfx Afieh from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Ball bearing for corner rounding cutter 24.2mm 1 unit Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hour. Storage location: Nattheim

Condition: new, overall weight: 10,500 kg, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 500 ¤ , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Iijdpfoxghugox Afioh

Condition: used, Year of construction: 2009, Suitable for automatic grinding of carbide circular saw blades on the face and back in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be grinded automatically and in a single pass. Accessories: Total enclosure, ND 230 loader (3-pallet loader), 4 loading carriages including 30 mm mandrels, measuring probe, grinding device with oil cooling, additional coolant cleaning system, automatic fire extinguishing system, automatic central lubrication system, extraction for oil and emulsion mist, alphanumeric keyboard, machine light, DES 300 data entry station for recording technical data of the circular saw blades including keyboard, monitor, and mouse, oil drip tray with floor grid, 2 grinding wheel holders, 1 saw blade magnet holder. Circular saw blade diameter without robot: 80-840 mm Circular saw blade diameter with robot: 100 - 630 mm Circular saw bore diameter: with robot from 10 -180 mm Iedpfx Aexfg Dwofieih Sheet thickness without robot: up to 14 mm Sheet thickness with robot: up to 5 mm Tooth pitch: 6 - 120 mm rake angle: -35° to +40° Bevel grinding on the tooth back: up to 45 ° clearance angle: 5° - 45° Bevel grinding on the negative tooth face: up to 30° Working speed for breast and back grinding: up to 12 teeth/min., Machine dimensions L x W x H =: 2316 x 1860 x 2058 mm weight machine: 3000 kg Loader weight: 1400 kg Grinding path and grinding speed per machining surface on the tooth: infinitely adjustable Dimensions loader L x W x H =: 3840 x 2020 x 2000 mm Connected load approx.: 4.4 kW (400 V / 50 Hz) colour: telegrey RAL 7045/7047

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Fiber Laser cutting machine FLV-3015-C2 3kW IPG / VF1530-3000W Specifications - Maximum sheet size: 3000 x 1500 mm - X/Y positioning accuracy: ±0.05 mm/m - X/Y positioning repeatability: ±0.03 mm - Maximum travel speed: 120000 mm/min Ijdpfx Ash Hfgyefijih - Maximum acceleration: 1.5 G - Motor power output: 3.0 kW - Source brand: Raycus or MAX Photonics to choose from - Input voltage: ~3×400 V 50 Hz - Ingress protection rating: IP54 Cutting thickness - Carbon steel: recommended thickness 20.0 mm, maximum thickness 22.0 mm - Stainless steel: recommended thickness 8.0 mm, maximum thickness 10.0 mm - Aluminum: recommended thickness 6.0 mm, maximum thickness 8.0 mm - Brass: recommended thickness 5.0 mm, maximum thickness 6.0 mm Structure The machine is very stable due to its welded structure on massive legs. Fuji Japanese servo drives with robust bevel rack and pinion drive ensure high speed and exceptional accuracy of the cutting head. The ABL system automatically replenishes the grease in the rails. RayTools cutting head with auto-focus. Control panel The control of the fiber laser occurs is carried out via the control panel with keyboard and mouse. The computer includes the Windows system and CypCut software, which comes with functions such as: - part programming, - file import and export, - adjustment of power output and cutting speed. Installed software has lifetime licenses Wireless remote The control of the laser head is carried out by a wireless remote control. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, each purchased machine includes a Specialist Assistance Package with dedicated hours of expert guidance. Within the service, our technicians may: - Prepare or redesign CAD drawings, - Advise on material and gas selection, - Assist in the selection of operating parameters for different materials. The remaining time can be checked in the Otinus Customer Panel. Free drawing package Each Otinus laser cutter includes a comprehensive set of ready-to-use CAD drawings. The designs included are ready-made as they can be immediately cut in any format. Our technician will show you how to do that during training. The drawings will be useful to anyone who wants to make various types of decorative items. Technical Consultation Our specialists help select the right machine and accessories based on technical drawings of the parts you plan to produce. Price-included 2-day training including installation of the machine - 1 day up to 8 hours - installation of the machine and learning to use the controller. - 2 days up to 8 hours - independent work under the supervision of our technician - possibility of programming specific details that are made by the Client. Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: new, overall weight: 10,500 kg, empty load weight: 2,850 kg, maximum load weight: 7,650 kg, axle configuration: 2 axles, loading space length: 5,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Each ramp approx. 2,700 mm long x 560 mm wide, ramps with grating, loading height: 840 mm, 10 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel side walls, foldable and removable, wood planks 50 mm, loading surface at rear beveled, inside loading width 2,480 mm, rear stanchion removable, front open for through-loading, Also available with a loading length of 6,300 mm!!, Rental price from 500 ¤, -- Printing errors, mistakes, and changes reserved, sample pictures --, More data at: !, More details: ! Iiodpfjxf Ty Ssx Afijh

Condition: new, overall weight: 11,900 kg, empty load weight: 3,120 kg, maximum load weight: 8,780 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2700 mm long x 900 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel side walls, foldable and removable, wooden planks 50 mm, loading area bevelled at the rear, inside loading area width 2480 mm, rear stanchion removable, front for through-loading, , Also available with 5300 mm loading area length!!, , Rental price from 500 ¤, , --  Subject to printing errors, mistakes and changes, Sample images --, More data at: !, More details: ! Ijdpfx Afsxf Tz Asioih

Condition: new, overall weight: 13,000 kg, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, axle configuration: 2 axles, loading space length: 5,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 10 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 6,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Iiedjxf Tz Nepfx Afish

Condition: new, overall weight: 10,500 kg, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length! , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Iijdpfjxf T A Hsx Afieh

Condition: new, overall weight: 11,900 kg, empty load weight: 3,120 kg, maximum load weight: 8,780 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2700 mm long x 900 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel side walls, foldable and removable, wooden planks 50 mm, loading area bevelled at the rear, inside loading area width 2480 mm, rear stanchion removable, front for through-loading, , Also available with 5300 mm loading area length!!, , Rental price from 500 ¤, , --  Subject to printing errors, mistakes and changes, Sample images --, More data at: !, More details: ! Ijdpexf Tzvsfx Afisih

Condition: new, overall weight: 10,500 kg, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 500 ¤ , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Iijdpfx Afoxf T Atsieh

Condition: new, overall weight: 13,000 kg, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ijdpfjxf T Aajx Afisih

Condition: new, overall weight: 13,000 kg, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Iisdpoxf T Agsfx Afieh

Condition: new, overall weight: 13,000 kg, empty load weight: 3,050 kg, maximum load weight: 9,950 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 900 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Iiedpsxf T A Tjfx Afioh