Used Beveller for sale (514)

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 500 ¤ , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gijdpfjy Irupjx Ab Djt

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length! , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gsdpfx Ajy Irtreb Doit

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length! , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Godpoy Irrzofx Ab Djit

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gsdpoy Irruofx Ab Djit

Condition: new, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,700 mm, loading space width: 2,480 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 400 mm side walls, steel side walls HOT-DIP GALVANIZED, with central stake on the side, plug-in, chassis: hot-dip galvanized, wooden floor, 14 lashing eyes in the outer frame, bevelled at the rear, 2 x ramps each 3,000 mm long x 725 mm wide, ramps with spring lifting mechanism, ramps with gratings also available in wood!, Loading height: 880 mm, , Also available in loading area length 7.20 m, available for immediate delivery., , Rental price from 580 euros, , --  Subject to printing errors, mistakes and changes, Sample images --, More data at: !, More details: ! Giedpfx Aboy Ifhie Dot

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length! , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gjdpfxoy Ifgrs Ab Doit

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. Gijdpfx Aey Idhhob Det * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Year of construction: 2005, condition: excellent (used), Name: Vertical heating cooling mixer Manufacturer: Lödige Type: TSHK160 / KGU400 Year built: 2005 Gsdpfx Aeiup H Tob Dsit Speed: 104 / 300-1500 rpm Hours of operation: Very few operating hours Material: Stainless steel Driving force: 11 / 45 kW Model: ATEX version / Explosion proof Total content: Heating mixer: 210 liters / cooling mixer: 391 liters Parts in contact with product: 1.4541 Gear box: Bevel gear motor/ motor frequency controlled Dimensions: L 4605 x W 4225 x H 3550 mm Technical doc.: Yes Message: Technical center operation. Wood chips / melanin wood additives Accessories: Platform with stairs, 30 kW temperature control unit, control panel, control cabinet, dust filter

Condition: used, mileage: 323,295 km, power: 290 kW (394.29 HP), first registration: 01/2019, fuel type: diesel, empty load weight: 12,970 kg, maximum load weight: 13,030 kg, overall weight: 26,000 kg, tire size: 315/70R22.5, axle configuration: 6x2, wheelbase: 5,500 mm, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space length: 9,040 mm, loading space width: 2,500 mm, loading space height: 2,098 mm, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, parking heater, power assisted steering, seat heater, tail-lift, traction control, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, large cab, 1 comfort seat, 1 bed, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, fog lights, tool box, air suspension, aluminum tank, last axle liftable, last axle hydraulically steered, lashing rails, underrun protection, mechanical ramps, side aluminum underrun guard, roof hatch, aluminum tail lift, upright, green environmental badge. Giedpoyi Hpvsfx Ab Djt Wheelbase: 5500 mm Superstructure: damaged insulated refrigerated box body with underfloor cooling unit Carrier Supra 950U & 2.5t tail lift BÄR BC 2500 S4. The vehicle has damage to the rear left of the body! Front axle air-suspended, 8t front axle, rear axle hypoid bevel gear 440 13t, 7.5t tag axle steered/relievable/liftable, electric brake system with ABS and ASR, disc brakes on front and rear axles, condensate monitoring for compressed air system, additional stabilizer on rear/tag axle, front underrun protection made of aluminum, smoker’s package, comfort lower bed, residual heat utilization, hot water auxiliary heater, start-off aid, ClassicSpace, comfort central locking, driving program "economy", Mercedes PowerShift 3, pre-equipment for toll recording, LED daytime running lights, high performance engine brake, powertrain pack 2, chrome package, ESP, lane keeping assist, attention assist, Active Brake Assist. Operating hours cooling unit approx. 2327h! Equipment details without guarantee, subject to change, prior sale and errors excepted!

Condition: used, mileage: 123,740 km, power: 175 kW (237.93 HP), first registration: 12/2015, overall weight: 15,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 6,515 kg, empty load weight: 8,485 kg, tire size: 275/80R22.5, next inspection (TÜV): 06/2025, wheelbase: 3,360 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, low noise, traction control, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, short cab, 1x air-suspended seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, ABS (anti-lock braking system), traction control system (ASR), constant throttle, raised exhaust, beacon, air suspension, low-noise G1, central locking, green environmental badge Wheelbase: 3360 mm Body: Faun sweeper Viajet 6RH, 5.3 t front axle, rear axle bevel gear 410 hypoid 10.8 t, electronic braking system with ABS and ASR, disc brakes on front and rear axle, classic cockpit, activated carbon filter, PSM, ClassicSpace, LED daytime running lights, ESP (electronic stability program), engine brake, rear engine PTO with 100 mm flange, 600 Nm. Approx. 4043 body operating hours! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to alterations, prior sale, and errors! Giodpfx Aowq Sy Rjb Det

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 80 mm, edge thickness (max.): 15 mm, height adjustment type: electric, overall weight: 7,000 kg, year of last overhaul: 2023, compressed air connection: 6 bar, power of the milling unit: 3,000 W, space requirement length: 10,500 mm, Fully refurbished Topedge Duo-melt, year 2014 2 x 3Kw each Pre-milling motors 80 mm panel thickness 1 x Synchroflex top driven belt system Gjdpfsx Nbprsx Ab Doit 2 x Glue heads and tanks, Duo Melt system (For instant glue colour changes) 1 x rough trim station 1 x Bevel fine trim (can also be used for fine finishing wood in “flat” setting - adjustable angle 1 x Radius trimming machine 1 x AKF station 1 x 4 position per side AZK4 radius scraper 1 x Flat scraper 1 x Cleaning spray, front, middle and back - LCM 1 x Buffing station 2 x free spaces Infeed fence alignment for narrow panels Nesting package LCM iRelease cleaning system BrushTec ES - not included

Condition: new, empty load weight: 3,120 kg, maximum load weight: 8,780 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2700 mm long x 900 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel side walls, foldable and removable, wooden planks 50 mm, loading area bevelled at the rear, inside loading area width 2480 mm, rear stanchion removable, front for through-loading, , Also available with 5300 mm loading area length!!, , Rental price from 500 ¤, , --  Subject to printing errors, mistakes and changes, Sample images --, More data at: !, More details: ! Gsdpfx Aoy H A Rfeb Deit

Condition: ready for operation (used), Year of construction: 2016, Edgebander manufactured in 2016. This HOMAG KAL 370 features a continuously adjustable feed speed of 18-20 m/min and accommodates workpiece thicknesses from 8 to 60 mm. It includes advanced gluing and trimming units, as well as a comprehensive software package for efficient operation. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG KAL 370 machine we have for sale. Contact us for further details. • Feed speed: Continuously adjustable 18–20 m/min • Fixed stop side: Left • Workpiece thickness: 8–60 mm Giedpfey Hrtpox Ab Dot • Workpiece overhang: 30 mm • Throughput equipment: Pre-installation for Boomerang TFU140 • Feed lock: Available • Feature packages: Future-Paket 5; Foil/High-Gloss Package (bottom) • Infeed features: Sliding carriage; Workpiece alignment at infeed; Workpiece support with roller track; Infeed barrier • Workpiece transport: Transport device; Top pressure • Cleaning/Prep: Release agent spraying unit (top/bottom) • Jointing/Milling: Joint trimming unit; I-System-DIA jointing cutter set WD60; Workpiece pre-heating (up to 60 mm thickness) • Gluing: Gluing unit; Preparation for Airtec activation unit; Adhesive application system; Application units QA60 and PU60; Pressure tank for PU application unit • Magazine/Pressure: Edge magazine; Pressure zone • Spraying: Lubricant spraying unit (top, bottom, side) • Trimming/Milling: Snipping unit HL81 (bevel/straight, 0.8 kW); Pneumatic adjustment for flush/overhang trimming; Pre-milling unit BF10; HM milling cutter set (straight); Form milling unit FK11 • Tooling/Changeover: I-Exchange head system (automatically adjustable/FK); I-DIA radius cutter set (for FK, R=2 mm, Z=4); Standard milling unit SF21; Multi-profile scraper MN21 (automatic); Profile knife set for MN20/21 • Additional units: Joint scraper FA20 BASIC; Automated scanning for joint FA20; Buffing unit FA06 (top/bottom); Powercontrol PC23 Powertouch • Control/Software: Software package WoodCommander; Antenna sequence control; Machine data acquisition and evaluation; Error diagnosis; Teleservicenet-soft • System/Networking: Emergency stop interlock; Network connection (Ethernet); Manual control for setup mode; Language: German • Documentation: On data carrier and paper Additional equipment • Boomerang return system TFU140/20/08-Optimat • Workpiece detection (sensor-based) • Basic outfeed return line • CE for cells (systems)

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control Gijdpfx Aboy Nd Hyj Dst • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Year of construction: 2005, condition: used, functionality: fully functional, power of the buffing unit: 52,000 W, For sale: Professional edge polishing machine Bellani Supermodulo, ideal for marble, granite, and quartz processing. The machine is in good working condition and features the reliable O.M.G.M. Electronic Control system for precise positioning. Key features: Model: Bellani Supermodulo. Control Unit: O.M.G.M. Electronic Control for convenient parameter adjustment. Configuration of working heads: 1x Calibration Head: For thickness regulation. 8x Polishing Heads: For flat or round edge finishing. 4x Beveling/Chamfering Heads: For upper and lower 45° bevels. 1x Drip Groove / Slot Cutting Head Gijdpfeyaqmmox Ab Det Functionality: Multi-head system for calibration, flat and round edge polishing, and beveling (chamfering). Technical details: Type: Edge Polishing Machine Manufacturer: Bellani Model: Supermodulo Year of manufacture: 2005 Condition: Used (Good) Status: Machine is currently in operation and available for inspection. Condition: Well-maintained for its age, with robust build quality typical of Bellani machines. The Supermodulo series is renowned for its durability and the high-quality finish it achieves on thick stone slabs. Ideal for workshops seeking a reliable, cost-effective solution. Location: Tosic MG, Vojvode Putnika 76, 18000 Nis, Serbia

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length! , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Godpoy Hhyxefx Ab Doit

Condition: new, empty load weight: 2,850 kg, maximum load weight: 7,650 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Each ramp approx. 2,700 mm long x 560 mm wide, ramps with grating, loading height: 840 mm, 10 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel side walls, foldable and removable, wood planks 50 mm, loading surface at rear beveled, inside loading width 2,480 mm, rear stanchion removable, front open for through-loading, Also available with a loading length of 6,300 mm!!, Rental price from 500 ¤, -- Printing errors, mistakes, and changes reserved, sample pictures --, More data at: !, More details: ! Godpoy Hhxhefx Ab Djit

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Gjdpjvvkipsfx Ab Djit

Year of construction: 2000, condition: good (used), Offered from an insolvency is a pipe end processing machine Manufacturer unknown Model ?? Year of manufacture ?? Machine no.?? Gsdpfx Asfynfweb Dsit Technical data: Compressed air driven Tube diameter up to 401mm possible Accessories as shown

Condition: used, Year of construction: 1997, Suitable for automatic grinding of the tooth geometry on chip and flank faces (front and back) of HM - tipped circular saw blades. All common tooth shapes can be finish-ground in one cycle (also trapezoidal flat tooth). Accessories: Total enclosure, Motorized chip and clearance angle adjustment Manual central lubrication Giodpfx Abeyv Hq Uo Det Coolant grinding system, 1 arbor, 2 magnetic sawblade holders, 4 centering sleeves, 1 grinding wheel holder. Circular saw blade diameter: 80-810mm Circular Saw Bore Diameter: from 10 mm blade thickness: up to 5 mm Tooth pitch: 7-100mm rake angle: - 20° to +40° clearance angle: 6° to 45° tooth height difference: any Bevel cut on the back of the tooth: up to 45 ° Working speed: up to 20 teeth / min. Bevel cut on the tooth face: up to 15° grinding path max.: 20 mm Grinding wheel bore diameter: 32 mm Grinding wheel diameter: 125 mm Connected load: 1.6kW (400V / 50Hz) Weight approx.: 650 kg Dimensions W x D x H =: 1860 x 1010 x 1970 mm colour: turquoise RAL 5018 / gray RAL 7035

Condition: used, Year of construction: 2009, functionality: fully functional, input voltage: 400 V, power: 1.5 kW (2.04 HP), input frequency: 50 Hz, We are offering this used Hog Maschinen ABRADE MASTER PRO bevel and edge rounding grinding machine, year of manufacture 2009. Year of manufacture: 2009 Rated voltage: 400 V Frequency: 50 Hz Main motor rated power: 1.5 kW Main motor rated current: 16 A Secondary motor rated power: 0.12 kW Bevel and edge rounding grinding machine Variable adjustable bevel 0-12 mm Rounding 2-15 mm radius Including feed and stand Description: Belt drive electrically powered, oscillation can be switched on as needed. Feed with 4 speeds. Extraction connection Compressed air connection for belt cleaning Gsdpsy Ir H Sjfx Ab Doit If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 41,124 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, laser type: CO₂ laser, laser source manufacturer: Rofin, laser source model: DC035, laser hours: 12,753 h, laser power: 3,500 W, pipe diameter (max.): 240 mm, pipe length (max.): 12,500 mm, workpiece weight (max.): 400 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, 🔷 2016 BLM Adige LT8.10 CNC Tube Laser – 3.5kW CO₂ | 3D Tilt Head | 12.5m Load | Siemens Control Used 2016 BLM LT8.10 CNC tube laser for sale. 3.5kW CO2, Siemens control, 3D cutting head, 12.5m loader. Fully equipped with chiller & extraction. 💡 High Performance 3D Tube Laser Cutting System – Fully Automated 2016 BLM Adige LT8.10 CNC Tube Laser, a premium 3D tube laser cutting machine designed for high precision, flexibility, and productivity across a wide range of tube and profile cutting applications. The LT8.10 is one of the most versatile machines in its class, capable of processing round, square, rectangular, and structural profiles (I-beams, channels, etc.) with high accuracy and repeatability. 🔧 Machine Details Manufacturer: BLM Group (Adige) Model: LT8.10 Year: 11/2016 Type: CNC Tube Laser Cutting Machine Laser Type: CO₂ Laser Source: Rofin DC035 (3.5 kW) Control: Siemens CNC ⚙️ Key Features 3D Laser Cutting Head with Tilt Capability (±45°) High precision angular / bevel cutting Fully automatic tube processing Designed for high productivity and flexibility Automatic parameter adjustments for optimal cutting performance Capable of cutting complex geometries and joints 📏 Tube & Profile Capacity Round Tube Diameter: Ø12 – 240 mm Square Tube: up to 200 x 200 mm Max Bar Length: 12,500 mm (12.5m infeed) Unloading Length: 8,500 mm Max Linear Weight: 40 kg/m Max Total Bar Weight: 400 kg ✔ Processes: Round, square & rectangular tube Flat oval & special profiles Structural sections (I-beam, U-channel, angle, etc.) ⚡ Laser & Cutting Capabilities Laser Power: 3.5 kW CO₂ (Rofin DC035) 3D Bevel Cutting: Yes (tilting head) Automatic Focus & Adjustment Systems High quality edge finish Gsdpfx Aboy Ir Euj Deit Ideal for weld prep & complex fabrication work 🧠 CNC & Software Siemens CNC Control System User-friendly interface Full program control and automation High precision motion control for complex cutting operations 🔄 Loading & Handling System Automatic Tube Loading System Infeed Length: 12.5 metres Outfeed Length: 8.5 metres Automatic tube positioning & rotation Multi-position unloading capability ❄️ Supporting Equipment Included Chiller: Cosmotec WLAD842207ZAS0 Extraction Unit: Donaldson Torit DCE 2DFP4-SPRK Full integrated system ready for production 🧱 Machine Overview The LT8.10 is designed to deliver high precision without compromising productivity, making it ideal for both high-volume production and complex custom fabrication. Its rigid structure, automatic handling systems, and 3D cutting capability make it a top-tier solution for: Steel fabrication Structural engineering Tube processing companies Automotive & industrial manufacturing 💰 Why This Machine? Proven BLM Group reliability High-end 3D tube laser capability Handles large diameter tubes (up to 240 mm) Fully automated system → low labour cost Complete package with chiller & extraction Excellent value compared to new Notes: *Specifications are given in good faith but not guaranteed*

Condition: like new (used), Year of construction: 2012, Profiling parquet machine for longitudinal side 5+5 motors Speed up to 60 m/min Gisdsxwnhbjpfx Ab Djt Min. Working width 70 mm (65 mm without bevel) Kit of Diamond tools for T&G profile +infeed belt conveyor with lateral guide Installed, visible at our factory in working condition

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, CNC Plasma Cutting System 6000x3000 mm – EPL 3060 ERMAKSAN 5 AXES – Hypertherm XPR300 with OPTIMIX – Bevel Unit YEAR OF MANUFACTURE: 2024 The machine was newly sold at the end of 2024 and is being offered for sale due to the company’s insolvency. The photos in the listing were taken during the commissioning phase; current photos will be provided at a later date. CNC Plasma Cutting System • Machine type: CNC plasma cutting table • Condition: Used – in good operating condition • Availability: Immediately available Working Area • Cutting table size: approx. 6000 × 3000 mm Plasma System • Plasma power source: Hypertherm XPR300 High-definition plasma system for precise and fast cutting of mild steel, stainless steel, and aluminum. Features • Bevel unit: BEVEL-R (5-axis bevel cutting system) for weld seam preparation and bevel cuts Extraction System • Sturdy, industrial gantry construction • High precision and productivity • Bevel cutting capability for complex parts Gjdpfx Absy Ipb Tj Djit

Condition: ready for operation (used), Year of construction: 2020, laser power: 54,000 W, number of axes: 3, This 3-axis ESAB SUPRAREX 3100 SXE was manufactured in 2020. It features high-definition plasma cutting technology with a maximum tube length of 8,000 mm and a maximum tube diameter of 750 mm. The machine includes advanced bevel cutting capabilities and a robust construction with precision guides. If you are looking to get high-quality tube cutting capabilities, consider the ESAB SUPRAREX 3100 SXE tube cutting machine we have for sale. Contact us for further details. • Cutting technology: High Definition Plasma • Tube capacity • Max tube length: 8,000 mm • Min/Max tube diameter: 100 mm / 750 mm • Min/Max wall thickness: 3 mm / 20 mm • Cutting capabilities • Straight cutting, bevel cutting, V bevels, Y bevels, 3D tube cutting • Axis configuration / movements • X (longitudinal): Double synchronized brushless drive with electronic axis control on both sides of the gantry; guide length 11,000 mm; double motorization • Y (transversal): Brushless drive with rack and pinion transmission • Z (vertical): Motorized torch positioning axis, speed up to 4,000 mm/min • Tube rotation axis: Synchronized spindle for tube rotation, tube length up to 8,000 mm • Bevel head – VBA WRIST • Rotation: ±540° • Tilt/bevel adjustment: ±60° • Cutting bevel angle: ±45° • Max tilt speed: 38°/sec • Tangential control during cutting • Arc-voltage torch height control • Mechanical feeler torch height control for bevel cutting • Torch collision protection • Machine construction • Heavy-duty machine frame • Longitudinal and transversal precision guides • Precision rack & pinion drive system • Brushless motors • Chuck / spindle • Synchronized spindle for tube cutting • Chuck size: 500 mm • Through hole: 150 mm • Tube supports • 3 manual support carriages with trapezoidal screw positioning • Plasma generator • Model: ESAB iSeries300i • Max current: 300 A (range 5–300 A) • Output voltage: 180 V • Power supply: 380 V / 50–60 Hz • Duty cycle (40°C): 100% • Maximum output power: 54 kW • Process gases • Plasma gases: Air / O2 / Ar-H2 / N2 • Shield gases: Air / N2 / O2 / H2O • Generator dimensions • 1219 x 898 x 1031 mm • Control system • ESAB VISION T5 CNC • 18.5” colour touchscreen, glove operable • OpWizard operator assistance software • Software • ESAB Tube Cutting Programming Software Additional equipment Gisdpey Ephasfx Ab Djt • Flat cutting table with slats, 1,500 x 1,000 mm