Used Beveller for sale (513)

Condition: good (used), Year of construction: 2000, Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling machine: with adjustable speed -Depth adjustment: 0 - 7 mm -Drive: 0.75 kW -Adjustable speed: 0 - 6000 rpm -Angle: 45° -Accessories: Widia milling head -Dimensions: 650/560/H1190 mm -Weight: 94 kg Hfodpsy Rt Aasfx Ag Ieg

Condition: new, empty load weight: 3,050 kg, maximum load weight: 9,950 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 900 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Hodpoy Rr Hkjfx Ag Iofg

Condition: used, Year of construction: 2014, Technical Description: Hfedjy Rphxopfx Ag Ijg Cutting Height: Vertical: 2,150 mm, Horizontal: 50–2,000 mm Cutting Length: 4,300 mm Cutting Depth: 80 mm (with clamps: 55 mm) Saw Blade Protrusion Behind Workpiece: approx. 15 mm Saw Blade: Diameter 303 mm, Bore 30 mm, Z=60 Alternate Top Bevel Saw Blade Rotation: 4,200 rpm Motor Power: 4 kW (5.5 HP) Required Air Pressure: 6 bar Material Support Rollers: 20 ball-bearing rollers + 2 infeed/outfeed rollers Panel Locking for horizontal cuts via pneumatic workpiece clamping system, controlled by a switch on the operator panel. Middle Support: 3 support elements for 3 m support, foldable individually by hand. Dimension Readout for: - Horizontal Cuts: by digital readout with zero reset (for strip cutting from top to bottom), by scale from 0–2,100 mm, and by strip stop from 75–730 mm - Vertical Cuts: by electronic digital display and scale from 0–1,300 mm Extraction Nozzles: 100 mm for the saw unit and 120 mm for the rear extraction ducts, positioned on the right side of the machine frame. Equipment Features: - ADVANCE clamping system, consisting of 2 pneumatic clamping jaws motor-driven on ball screw along vertical axes. The clamping jaws can be positioned to the upper edge of the panel via joystick. The jaws automatically detect and stop at the panel’s upper edge using a contact switch. After reaching, the jaws close and secure the panel. They support panels up to max. 150 kg. The jaws can lift the panel for lower edge trimming, then relocate it with the trimmed edge resting on the lower support (also detected by contact switch). The jaws can then be raised again or continue holding the panel during horizontal cutting to relieve the cut. This prevents the panel from dropping onto the saw blade after the horizontal cut! Standard distance between clamps is approx. 1,800 mm. Position: right side of the machine (other positions available at extra cost). Minimum strip height with Advance jaws: 400 mm. - Electropneumatic scoring system for chip-free saw cuts by double cutting with the main blade (no scoring width adjustment needed – always ready to use – user-friendly) - Torsion-resistant, freestanding machine frame. - Round rod guide for vertical and horizontal travel. - Pneumatically retractable slatted panel prevents contact between saw blade and rear wall slats (strip). A sensor detects slat position; the grid recoils pneumatically if the saw would hit a slat. - Extraction nozzle on the saw head for dust collection in front of the workpiece. - Extraction nozzles for 3 vertical extraction ducts for dust generated behind the workpiece. - Fine-adjustable flip stop for vertical cuts, guided on a 30 mm round bar. - Extension stop (eliminating the need to lift heavy panels from the lower rollers onto the middle support). - Fine adjustment for horizontal cuts via handwheel. - Foldable strip cutting stop with ball bearing sensor along upper panel edge, adjustable from 75–730 mm.

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Hjdjy Rlk Aspfx Ag Isfg

Condition: new, Edge and contour milling machine Make: Assfalg Model: KKE 1 Hfedpfx Agjbhfzbs Ieg condition: new machine Speed: 8.000 - 24.000 rpm (infinitely variable) max. bevel width: 3 mm serially equipped with: - Guide rail - wrenches, open-end wrenches - Insert ring Ø 30 x 8 mm - Collet Ø 6 mm with union nut - Operating instructions

Condition: refurbished (used), Schmidt Tempo EC 500 Saw Blade Sharpening Machine For SHARPENING and NEW TOOTHING of HSS and segment circular saw blades, including beveling of teeth (top/bottom). Technical Data: - Blade diameter: approx. 20 – 500 mm - Saw blade thickness: max. 6 mm - Working speed: approx. 40–100 teeth/min - Grinding wheel diameter: max. 200 mm - Number of teeth: 20–999 (electronically selectable) - Tooth forms: tooth form A, AW, arc tooth B, BW and C per DIN 1840 (electronically selectable) Adjustment options: - Tooth form (electronically selectable) - Number of teeth (electronically selectable) - Automatic feed - Automatic dressing device - Free grinding (electronically selectable) - Oscillation grinding (electronically selectable) - Cylindrical grinding (electronically selectable) - Regrinding of segments - Setting the direction of rotation (electronically selectable) - Halving of number of teeth (electronically selectable) for tooth chamfering - Adjustment of tooth height difference - With LED display - Error message display Scope of supply: - Soundproof enclosure - 10 grinding wheels of various widths - Saw blade holders (small, medium, large: 60, 120, 180 mm diameter) - Grinding wheel holders (small, large: 80, 120 mm diameter) - 1 set of standard reducing rings 16 x 20, 22, 27, 32, 40, 50 mm - Saw blade support - Operating manual, circuit diagrams Weight: approx. 880 kg Connected load: 2.5 kW Operating voltage: 400 V Paint: Green The machine is in very good original condition and can be inspected/tested under power. The machine is sold with a 100% functionality guarantee upon delivery! Spare parts/accessories available if required. Subject to prior sale and errors. Hfedpfshua E Djx Ag Ieg

Condition: new, Year of construction: 2026, functionality: fully functional, /// Overview The NB7X is a high-performance automatic edge banding machine designed for handle-free cabinet door production. It switches easily between half bevel (45°) and full straight edge modes, and features twin diamond cutters, a twin glue station, and a twin tape coil magazine. Suitable for panels from 9 to 50 mm thick (straight) and 15–25 mm (half bevel), it is an excellent solution for modern, handleless furniture manufacturing. /// Key Features Bevel edge milling — Two 4 kW high-power motors at 2,800 rpm with 45° diamond forming bevel cutters for precise, crack-free milling. Hsdpfjy Sk T Eox Ag Isfg Pre-milling — Dual Leitz diamond cutters (2× 3.7 kW, 9,000 rpm) rework imperfections from panel saw cutting for superior edge adhesion. Twin glue system — Separate gluing units for straight and 45° bevel edges; Teflon-coated EVA glue pot (~5 L) plus optional auto glue pumping with a 25 kg basin. Pre-heating — Warms the panel edge before gluing, ideal for cold or humid environments. Tape handling — Separate tape brackets for full straight and half bevel modes, with an edge tape grooving device for cleaner folding on thicker tapes. End, rough, fine & corner trimming — Full set of trimming stations with high-speed motors and copy-tracing structures to protect hinge holes. Scraping & buffing — Flat and profile scraping removes excess glue; dual-cloth buffing delivers a polished, shiny finish. Top presser — Aluminum beam with auto height adjustment based on workpiece thickness; compact wearproof rubber rollers prevent displacement during conveying. Safety — Feeding protector, workpiece thickness detection, interval feeding detection, and emergency stop. Control — 10″ touch screen with PLC control (380V/50Hz), energy-saving standby mode, and remote switch. Available in English, Simplified Chinese, and Traditional Chinese. /// Machine Construction The heavy-duty welded steel body undergoes heat treatment, vibration aging treatment, sandblasting, and CNC finishing for long-term dimensional stability. All machines are assembled by experienced technicians following strict SOPs and delivered with a Quality Certificate signed by a QC specialist.

Condition: used, diameter . mm Number of knives . tool adaptor . The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Hjdpfx Asyqvihsg Iofg Your Markus Hirsch Team

Condition: new, maximum load weight: 32,850 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,600 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, loading space volume: 25 m³, Year of construction: 2025, Equipment: ABS, New vehicle! Available for purchase, rental, or lease with purchase option upon request! New Meiller 25m³ steel round tipper body with electric sliding cover and mounted swing rear gate – TPMS tire pressure monitoring system ----* Manufacturer: Meiller * Model: MHPS44/3N * First registration: - (NEW VEHICLE) * Gross weight according to manufacturer: 39,000 kg * Unladen weight according to manufacturer: 6,100 kg * Capacity: approx. 25m³ (approx. 7.6m long x 2.3m wide x 1.5m high) * Axles: 3x BPW axles / 1st axle liftable / traction aid / disc brakes * Tyres: 385/65 R 22.5 profile S NEW * Suspension: Air suspension with raise and lower function * TIRE PRESSURE MONITORING SYSTEM mandatory from 01.07.2024 * Colour: Body + tarpaulin RAL 9006 White Aluminium, chassis RAL 7021 Black Grey * ABS / EBS * Swing tailgate with side toggle locks and rear wall seal * Access ladder front left inside the body * Bevelled front corners of the body for improved material flow * 5/6mm floor * 4mm side walls * 4mm front wall * 4mm rear wall * Chassis frame in welded construction made of high-strength fine-grained steel Hodpfx Agsv Iipxe Iefg * Coupling height unladen 1,247 mm * Coupling height laden 1,217 mm * Electric Meiller sliding cover with remote control including aluminium ladder front left * Single mudguards * Drop legs * Aluminium air tanks * Document pocket on front wall * ECAS with automatic lowering during tipping * TPMS tire pressure monitoring system * Folding underrun protection * Additional LED reversing light New vehicle! Available for purchase, rental, or lease with purchase option upon request! Notice regarding possible errors in the listing: Despite careful preparation of the advertisement, errors may occasionally occur in the text or information. We assume no liability for errors, changes, or prior sale. All information provided without guarantee. Please contact us to verify details or if you have further questions.

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 HBE 320/523 G SAWING MACHINE. Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 Hedey R Tk Rjpfx Ag Ijfg 45°: 310x300 Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20

Year of construction: 2019, condition: used, functionality: fully functional, We are offering this used PROMASZ B1PK-14.0-2000.2S edge and profile processing centre, year of manufacture 2019. • Satinising & polishing of edges up to 8-10 cm thickness • Straight bevel, wide bevel, quarter round and half round profiles • Low hours of operation • Year of manufacture: 2019 • Touch display • Pneumatically retractable universal rollers • Mechanical stop • Grinding length approx. 3 m • Required space approx. 4.5 m x 1.5 m x 2.5 m Hjdpjy R S H Refx Ag Isfg Weight: 2,900 kg Year of manufacture: 2019 Serial number: 1902003 Supply voltage: 3/N/PE~400 V, 50 Hz Control voltage: 24 V~; 12/24 V Max. spindle speed: 2,800 rpm Max. disc diameter: 130 mm If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Georgii Kobold KOD 346-AXUVTS64 three-phase motor SN Schwaben Präzision F 54.1 SN:389691 bevel gear, used, normal signs of use, 100% functional, scope of delivery as per photos Hfjdpfx Aji D H T Ssg Ieg

Condition: new, Neugart WPLS142-005-SSSB3AG-E24/50/130/165/B5/M10 bevel gear Item No. 100336738 SN:2231204-1, unused in opened original packaging, 100% functional, scope of delivery as per photos Hfodpfei Eb Ufex Ag Ijg

Condition: ready for operation (used), Used rack cutting machine Sykes V10B Hfjdpfx Ajy R Sxtjg Ijg Loading costs are to be borne by the buyer.

Condition: excellent (used), The Formid Limited is a roll forming line with an electrically extendable support system for forming sets up to 800 mm. The drive is manual via a bevel gearbox. It can be combined into a single electric system and measures the width of the spacing. Mounted on 45 mm shafts, 12 keyways, shaft distance 145 mm. Axle spacing 250 mm. Shaft spacing minimum 200 mm from each other and 800 mm apart. Powered by a 380-volt electric motor with 15 kW. The system is suitable for profiles with frequently varying center widths. It features center roller supports to maintain the lower layer of the steel strip, which in turn supports the base strip substrate in a defined profile. The system also includes 16 stations. Hsdpfx Aswxv Izog Iefg

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 200 mm gear width: 250 mm max. module: 3 Hsdpfey Nk Idox Ag Iofg min. module: 0,5 total power requirement: 45 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation *

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 130 mm max. module: 3 total power requirement: 15 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,3 x 2,5 x 2,17 m A well-preserved CNC hobbing machine Vertical for shafts and wheels With tailstock Also suitable for hard milling (good for steering pinion) Rapid traverse radial, axial: 10.000 mm/min Rapid traverse tangential: 7.500 mm/min Max. wheel diameter 130 mm Max. module 3 mm Tangential slide travel 200 mm Radial slide travel 10 / 100 mm Axial slide travel 300 / 200 mm Hfodpfx Ajy Nk Hgeg Iog Milling head speed 250-3500 U/min Milling head -swivable +/- 40 ° Tool diameter 80 mm Tool length - max. 240 mm Table turning speeds 5 - 1000 U/min Milling spindle drive 15 kW Feed range mm/min Table diameter 132 mm Control Sinumerik 840 C Connected load 40 kVA Motor output 15 kW Weight : 6 T Dimensions 2300 mm * 2500 mm * 2170mm Accessories : Hydraulical workpiece clamping Automatic loading system Magnetic chip conveyor *

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Hfedpfsy Nivyex Ag Isg

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 500 ¤ , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Hfsdoy Nitfjpfx Ag Iog

Condition: used, For converting electrical energy into kinetic energy. Conversion of torque and speed through gearing. Used electric motors, available with and without gearbox, with and without brake, in various designs and with different equipment and key figures. Speeds: 67 rpm Power factors: cosφ Power ratings: kW Amperages: A Voltages: 22 V Frequency: 50 / Hz Gear types: spur gear, worm gear, bevel gear, parallel shaft gear, variable speed gear. Gearbox speeds: 8 - 559 rpm Torques: 5 - 840 Nm Drive: rpm Power factor: 0 cosφ Gearbox drive: 559 rpm Torque: 840 Nm Power: - kW Current: - A Voltage: 22 V Frequency: 50 / Hz Hfsdevcqrkspfx Ag Iog

Condition: used, Year of construction: 2010, Capacity: 18000 bottles/h closing heads: 24 pieces Power: approx. 5 kW Hjdpovcqgbofx Ag Isfg Water: approx. 200 l/h Compressed air: approx. 2 cbm/h Length: 3,3 m Width: 2,2 m Height: 2,4 m Weight: 3000 kg Formats: 0,33 l; 0,5 l; max. bottle diameter 90 mm Running direction: right - left Material: Stainless steel, wear-resistant plastic Base construction: miniaturized, hygienic machine table in outward beveled design Features: mechanical / pneumatic control device (testing of bow clamping), central lubrication, height adjustment for processing of different bottle heights, rinsing and swelling device, high-pressure injection device, HDE injection nozzle at the discharge table, Discharge table, pusher station

Condition: excellent (used), functionality: fully functional, saw blade diameter: 180 mm, We offer this very good Format-4 300-24-006 aggregate. This was ordered and rarely used, sat on the shelf for the last couple of years. Will come with a carpeted timber box we've made for it. Model Number: Format4 300-24-006 Interface: HSK-63F Gear Ratio: 1:1. Max Input Speed: 15,000 RPM. Max Torque: 20 Nm. Angle Adjustment: Manual swivel from 0° - 100°: Any other questions, please get in touch. Hsdpfjyrpk Uox Ag Iofg Currently listed on the Felder website for £5346 - €6153

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 20,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 28,000 mm, travel distance Z-axis: 850 mm, positioning speed: 40 m/min, workpiece weight (max.): 35,000 kg, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, NS-12020H PROFILE STEEL LASER CUTTING AUTOMATION LINE Technical Specifications Laser Power: 12000W-20000W X-axis Travel: 3500mm Y-axis Travel: 28000mm (customizable) Z-axis Travel: 800mm A-axis Travel: ±90° C-axis Travel: ±90° U-axis Travel: 30mm Maximum Speed: 40m/min Positioning Accuracy: ±0.1mm Hodpjvmwxxofx Ag Isfg Main Features： Simple and Stylish Integrated simple structure with a mobile design. Features a main control panel, laser unit, chiller, electrical cabinet, and cantilever beam structure, all highly integrated for stable mobility and operation. Quality Assurance Precision calibration and compensation of steel profiles. Enables automatic positioning and error detection of steel profiles. High positioning accuracy, low sizing error, and a 100% one-time through-hole rate. Increased Efficiency, Reduced Costs Professional material-checking software enables one-click nesting. Optimizes cutting sequences based on raw materials and component specifications. Automatically joins leftover materials to minimize waste and reduce costs. All-in-One Service Powerful 3D five-axis CNC technology. Supports profile cutting and 45-degree bevel cuts. Adapts to various cutting processes for different applications. Enhanced Quality and Efficiency Seamlessly integrates with TEKLA steel structure design software for professional and efficient operations. Reduces complex modeling processes and saves time on manual drawings. Enables one-click generation of component process codes to significantly boost production efficiency. Smart Management Automated loading and unloading system for streamlined feeding and cutting. Fully automated one-stop workflow. Efficiently completes bulk operations, reducing manual intervention and labor costs.

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Hfjdey Izviopfx Ag Ijg

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 500 ¤ , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Hfedpfx Aoy Izuxjg Ieg