Emmegi machining centre

Emmegi Phantomatic T3 A

Condition: used, Year of construction: 2009, 3-axis CNC machining centre - Emmegi Phantomatic T3, Year 2009 Working hours: only 15,681 hours and approximately 36 minutes (photo no. 8) for machining operations on bars or workpieces made of: Aluminium PVC Light alloys Steel up to 3 mm Equipped with a traversing work table that facilitates loading/unloading operations and considerably increases the machinable section. Main features: Electro-spindle: 5.5 kW (optional 7.5 kW) Maximum speed: 20,000 rpm Blodoy Ry Trepfx Aqrsh Tool holder: HSK 63F Manual quick-change tool magazine Blade capacity: Ø 180 mm Standard number of vices: 4 Maximum number of vices: 6 Manual vice positioning Axis travels: X axis: 4300 mm Y axis: 270 mm Z axis: 300 mm Machining capacities: -Top face machining: 1 -Side and end machining with angle head: 2 + 2 -Tapping capacity on aluminium: --Standard: M8 --Optional: M10 Equipment: 15” touchscreen operator interface USB connections Barcode reader predisposition Automatic pneumatic stops Software-programmable lubrication system

Condition: used, Year of construction: 1999, power: 3 kW (4.08 HP), input voltage: 400 V, cutting height (max.): 200 mm, saw blade diameter: 520 mm, overall weight: 350 kg, cutting length (max.): 420 mm, mount diameter: 50 mm, saw drive: 3,000 W, No. 04511 Crosscut and mitre saw Graule ZS 200 N Used, year of construction 1999 Saw can be swiveled and tilted 3 kW three-phase brake motor 400 V Saw blade diameter 520 mm Saw blade holder 50 mm Cutting height 200 mm Saw blade tilted to 45°: Cutting height 140 mm Cutting length 420 mm Table dimensions 900 x 700 mm LW Aluminium fence back With machine stand and hand crank at the rear for tilt adjustment Hydraulic feed brake Pneumatic material clamping on both sides from above Saw blade spray device for coolant or lubricant Carbide circular saw blade for aluminium and plastics, diameter 520 mm Roller conveyor type RLK 4000 mm, with fold-away material fence and scale Roller conveyor 4000 mm long after the saw Roller conveyor width 350 mm Transport dimensions machine approx. 1650 x 1200 x 1850 mm LWH, roller conveyors approx. 4500 x 400 x 1950 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Bledpsyh Nfusfx Aqreh Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Year of construction: 2009, condition: used, functionality: fully functional, machine/vehicle number: C107230, We are offering a well-maintained Emmegi PHANTOMATIC T3 A CNC machining center, ideal for processing aluminum and light alloy profiles. Machine Details: Manufacturer: Emmegi S.p.A. (Italy) Model: PHANTOMATIC T3 A Year: 2009 Bledpfx Aqey Idm Rsrjh Serial Number: C107230 Power: 7.5 kW Voltage: 400 V / 3-phase Current: 16 A Frequency: 50 Hz Weight: 1950 kg Description: The PHANTOMATIC T3 A is a versatile CNC machining center designed for milling, drilling, tapping, and cutting operations on aluminum profiles. Known for its reliability and precision, this machine is suitable for window, door, and façade production, as well as general aluminum fabrication.2Emmegi

Condition: excellent (used), functionality: fully functional, X axis travel (longitudinal axis): 4300 mm Y axis travel (transversal axis): 270 mm Z axis travel (vertical axis): 300 mm Electrospindle 1 HSD – max 18,000 rpm – power 5.5 kW Tool magazine capacity: 4 Angular head for lateral operations Number of clamps: 4 Automatic clamp positioning Weight: 1950 kg Bedpey Drzhjfx Aqrjlh

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Bsdpfx Aeuiy Nyjqrslh Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Year of construction: 2008, condition: used, functionality: fully functional, Three-axis interpolated CNC machining center with angular head accessory (enabling 4-axis machining), model Phantomatic T3 A. Specifically designed for comprehensive processing of aluminum, PVC, and light alloy profiles. Renowned for its historical reliability, precision, and sturdiness, this machine is ideally suited for window and door fabrication workshops as well as light metal carpentry applications. Structure and Configuration • Monoblock, fully enclosed frame with extensive perimeter protections • Completely enclosed working area with safety panels • Extended worktable with multiple pneumatic clamps for secure profile holding • Heavy-duty linear guides and kinematics, engineered for continuous operation • Prepared for machining of longer profiles Machining Unit • High-performance vertical spindle suitable for: o Milling o Drilling o Tapping o Slotting and contoured machining • Tool holding stations in view, including: o Milling head attachments o Drilling tools o Saw blade group (as shown in photos) • Manual tool change with current tool set included Controls and Commands • Emmegi operator console featuring: o Integrated monitor o Physical control keypad o Safety selectors o Emergency stop button • Ergonomic operator station with work surface • User-friendly, proven control system—suitable even for less experienced operators Included Equipment (as pictured) • Tool and toolholder set • Accessory case with: o Service wrenches o Clamping devices o Support equipment • Full set of guards and safety covers • Integrated electrical system on board the machine Applications Bsdpfsygumdex Aqrjlh • Aluminum and PVC windows and doors • Lightweight façades • Industrial profiles • Light metal fabrication • Precision machining of extruded profiles Machine Condition • Used machine • Overall condition: good • Source: production workshop • Dismantled / ready for loading (see photos) • Normal wear consistent with age

Year of construction: 2019, condition: excellent (used), functionality: fully functional, CNC machining center with 4 controlled axes and automatic spindle rotation (0-180°). This enables the machine to reach all 3 profile sides of the workpiece without manual repositioning. The machine is equipped with a water-cooled spindle capable of 20,000 rpm. It is suitable for machining profile bars or parts made of aluminum, PVC, light metal alloys, and steel up to 2 mm. Features a manual tool magazine with 9 slots and an automatic tool magazine with 4 slots on the left side of the enclosure. Additionally, it has a second automatic tool magazine with 4 slots on the right side of the enclosure. The profile is positioned by a pneumatically operated stop on the left, and secured by 4 robust clamps that are positioned and monitored automatically. With a second pneumatic stop on the right-hand side, processing of long bars—twice the machining length (overlength machining)—is possible. A movable clamping area also simplifies loading and unloading of workpieces and considerably increases the maximum workable cross-section. Bodpfxjyzb Eks Aqrelh The machine comes with the following special equipment: - CamPlus software - Shape software for creating custom machining operations and for importing machining drawings/contours - An additional tool magazine - A second stop - A safety enclosure (fully enclosed) Setup, commissioning, and operator training can also be provided by us!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 8 kW (10.88 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, OPTIMAT BHX055 Blodjyvh Dpopfx Aqrsh

Year of construction: 2014, condition: used, functionality: fully functional, Mobile chip extractor MG4, sound-insulated and equipped with automatic start. Features an antistatic filter, suitable for extracting aluminum, PVC, and steel chips. Automatic filter cleaning and easy chip container emptying thanks to castors. Bodpoycgtbofx Aqrjlh The VP version is fitted with a control unit featuring a potential-free contact for external activation by the connected machine. The front extraction system comprises two cast aluminium suction ports, each with a 100 mm diameter. These allow for multiple connections via plastic hoses with metal reinforcement to dust extraction devices mounted on cutting machines, sawing centers, machining centers, and PVC machinery. Accessories include adapters reducing to 70 mm, a Y-connector, and approximately 14 meters of extraction hose. (Perfectly set up for use with an Emmegi double mitre saw)

Condition: used, Year of construction: 2015, Vertical CNC machining center with 3 controlled axes and exceptional Y-axis machining capacity. It is equipped with a vacuum table clamping system that holds plates and sheets with the help of vacuum. This solution is particularly effective when machining thin parts that are difficult to fix using conventional clamping systems. The machining center is equipped with a set of valves that allow you to turn on or off different table zones, thus concentrating the vacuum in a specific area and optimizing the clamping of small components. Blodpfx Ajv D A Imsqrjh Possibility of performing interpolated milling and drilling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Tekna provides user-friendly software that can be operated by both experienced CNC programmers and less experienced users. The TKE 783 is a machining center with 3 controlled axes for interpolated drilling and milling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Technical specifications: Model: Tekna TKE783 Year of manufacture: 2015 Power: 29 kW Dimensions of the machining table: 2010 x 6300 mm Weight: 4842 kg Speed: X axis 70 m/min; Y axis 55 m/min; Z axis 30 m/min Software: Windows, Embedded, Teach-in software CAD/CAM 2D NC TOOL Made in: Italy Other: aluminum milling up to 4 mm was worked on. The machine is connected, you can see how it works and test it in Estonia. It will be ready for transportation in April-May. If you have any additional questions, we will be happy to answer them.