Used Belle Bwr 650 for sale (6,172)

Condition: excellent (used), CATALOG NUMBER 7613 Technical specifications: - Feed opening width: 650mm - Feed opening height: 300mm - Shaft width: 660mm - Knife length: 660mm Gsdpfx Aowa Aqljg Dsuk - Number of knives: 2 pcs - Screen dimensions: 90x100mm - 2 lower toothed feed rollers - Lower roller motor: 3kW - 2 upper toothed feed rollers - Upper roller motor: 3kW - Belt feeder - Feeder belt length: 2700mm - Feeder belt width: 630mm - Main motor: 75kW - Autoreverse - Reverse gear - Overall dimensions (L/W/H): 5350x1300x1300mm - Weight: 4200kg FEATURES – Made in Italy – Autoreverse (adjustable) – Reverse gear – Used chipper, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR (based on 4.2 PLN/EUR) (Prices may change with significant fluctuations)

Condition: good (used), The scope of delivery includes: 01x compartment divider, used Material color: grey white Gusdpfx Aoi Eu Dvjg Dok total length: approx. 775 mm Length tube: 650 mm + 5 mm plastic cap cross section: square tube 20 x 20 mm opening dimension: approx. 103 mm Weight: 0,93 kg | pcs.

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt Gujdpekn Rz Hjfx Ag Dok throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: new, 🧰 Product Features • Condition: new • Colour: grey • Volume: 650 l • Load capacity: 4000 kg (at 5°C ambient temperature) • Dead weight: 43 kg Gujdpfjhvrk Tjx Ag Djk • Length: 120 cm • Width: 100 cm • Height: 78 cm • Stackable: Yes • Dimensionally stable: Yes • Special features: suitable for rack storage, liquid-tight, drain valve optional 💰 Price € 145,- net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Available immediately • Inspection and collection: possible at any time by arrangement Constantly over 5000 linear meters of pallet racks from various manufacturers in stock (Subject to changes and errors in technical data, information and pricing as well as prior sale! See our General Terms and Conditions, all prices excl. VAT ex stock.)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (max) mm 1 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS Open Compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) by N.C. 08.378 (2 x Kw 4,5) Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (N. 16 reels) Snipping (end-cutting) unit 08.42/30/B (2 x Kw 0,66 - Pneu 0° - 25°) 30 m/min Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (2 x Kw 1) + Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (08.355 - 1 x Kw 0,5) 30 m/min Corner Rounding unit (Contour Trimming) 08.604 with 4 brushes (4 x Kw 0,25) Gjdpfx Agem Udfwo Dsuk Profile edge scraping unit (Multi-profile, by N.C.) 08.516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) + Buffing unit 08.617-4 (4 x Kw 0,18) Smoothing unit with spheres 08.53

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet. Drawer cabinet on a mobile base, stable design Gusdpfxjrb E Ezs Ag Dek -3 drawers: layout/height see photos, shelf can be opened at the top -lockable: without key -Dimensions: WTH 650/660/H1200 mm -Weight: 82 kg

Condition: ready for operation (used), Year of construction: 2019, operating hours: 20,000 h, General Data Machine weight 6500 kg Control Unit Brand ENGEL Main Drive Spindle motor power 92 kW Gujdpfsx D Rayox Ag Djk Injection Unit Screw diameter 60 mm Stroke volume 315 mm Injection pressure 2400 bar Screw speed 220 min-1 Nozzle pressure 2400 bar Clamping Unit Clamping force 6500 kN Opening stroke 1400 mm Distance between bars 1100x960 mm Mould height min 350 mm Mould height max 850 mm Size of mold platens 1510x1440 mm Ejector stroke 250 mm Ejector force for / back 95 kN Additional Equipment Oil Reservoir Capacity - Injection Unit: 500 l Maximum Cooling Power (32°C Water Inlet): 29.40 kWcool Water Consumption (32°C): 4.80 m3/h This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, Year of construction: 2008, Transnorm Rising falling Incline belt conveyor with leading belt GF 800+2800+650-700-600 RA2205 Technical data: Conveyor length (NL): 4250 mm ( 800 mm arch + 2800 mm riser segment + 650 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Guedpfsq I Ty Rsx Ag Dok Drive: SEW gear motor, R17DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, machine/vehicle number: 005635, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/II/650/A/R3 Position 2: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 4: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 5: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 6: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/II/650/A/R3 Guedpfx Agowuudyo Dsk

Year of construction: 1987, condition: used, sheet width 150 mm coil weight 80 kg coil external diameter 650 mm 1000 mm diameter of the mandrel 230 - 445 mm Gjdpfxefn Aqlj Ag Dsuk total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: not inspected (used), Kramer plate rolling machine / three-roll plate bending machine Type: RHM III 75/650 Max. sheet thickness: 3.5 mm Bending width: 650 mm Right & left rotation Heavy-duty The machine comes from a company closure, offered at a special price, untested. Gjdpex An A Aofx Ag Dsuk

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Layers: 5 Web Width: 1,500 mm Film thickness range: 10–45 μm Output: - 15 μm: up to 745 kg/h - 17 μm: up to 845 kg/h - 23 μm: up to 905 kg/h Final film widths (per bobbin): - 3 x 500 mm - 6 x 250 mm - 3 x 400 mm - 2 x 750 mm Coextrusion Structure / Number of Layers: 5 layers Layer distribution: B / A / D / A / C Percentage: 10 / 35 / 10 / 35 / 10 % Raw materials: - LLDPE: 2.8–5.0 g/10min (190°C/2.16kg) - VLDPE: 2.8–5.0 g/10min (190°C/2.16kg) Extruder "A": 90/33 L/D, Maximum LLDPE output: 800 kg/h Extruder "B": 60/28 L/D, Maximum LLDPE output: 200 kg/h Extruder "C": 60/28 L/D, Maximum LLDPE output: 200 kg/h Extruder "D": 60/28 L/D, Maximum LLDPE output: 200 kg/h Flat die lip width: 2,050 mm Roll width: 2,100 mm Chill roll C1 diameter: 1,600 mm Maximum mechanical speed: 650 m/min MATERIAL FEEDING AND DOSING "A": - 1 main component material feed - 1 additional component material feed - 1 gravimetric batch dosing system (mounted directly on the extruder, 3 components) MATERIAL FEEDING AND DOSING "B, C, D": - 3 main component material feeds - 6 additional component material feeds - 3 gravimetric batch dosing systems (mounted directly on the extruder, 3 components each) Extruder "A": - SML Single-Screw Extruder SML-ES-90/33 - Tool unit: Manually operated screen changer SML-MF-man/90 Extruder "B, C, D": - 3 SML Single-Screw Extruders SML-ES-60/28 - 3 Tool units: Manually operated screen changers SML-MF-man/60 Cloeren 5-layer/3-up Stretch Film System consisting of: - 1 five-layer feedblock FG - 1 automatic flat die, 2,050 mm (for automatic die control) - 1 die splitting system for flat die body separation and cleaning - 1 vacuum box, 2,050 mm - 1 triple-chamber vacuum box SML-TC/2050mm Cooling and take-off unit: - 1 casting section SML-CS/2100/650 - 1 electrostatic edge pinning device - 1 thickness measuring unit (X-ray sensor for automatic dies, stretch wrap film) Gedoxyuffopfx Ag Djuk - 1 recovery system for feeding stretch wrap film with vertical scraptruder for SML 90 mm single-screw extruder - 1 antistatic pipe - 1 power supply unit for antistatic pipes Winding unit: - 1 Cast Film Turret Winder Series W4000 for stretch wrap films - Max. end film width: 3 x 500 mm - Number of turrets: 1 - Number of winding shafts: 4 - Winding shaft diameter: 3" - Max. mechanical winding diameter (3" bobbins): 400 mm - Min. winding diameter: 82 mm - Winding tension: 15–100 N/m - Contact pressure: 50–500 N - Cycle time (3" core magazine): 20–25 s - High-speed Cast Film Turret Winder for stretch wrap film—compatible with 3" air shafts, contact winding mode - 1 automatic core and roll handling system W4000 4S1T (per turret) - 1 oscillating frame SML-OF/2100 Control and data logging: - 1 SML Automatic Control System SML-CS-2/SMILE/4 extruder - 1 SML Data Logging System: SMILE Process Analyzer - 1 E-container (20 ft) Chiller: Frigosystem Compressor unit: MSD V 30-37

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 3200 mm Measurements height 2700 mm Measurements depth 2500 mm Movement X-Axis Movement 700 mm Z-Axis Movement 450 mm Y-Axis Movement 550 mm Additional Equipment Oil Mist Extraction / Milling Spindle HSK 40 Fischer / Laser System / Infrared Measuring Probe / SW 3D Form Inspect / Handling System 84 × ITS 50 / 16 × ITS 148 / WINSTAT Connect Main Drive Number of axis 3 Spindle Speed 42000 RPM Spindle motor power 17 kW Tool taper HSK 40 Table Table load 2000 kg Tools Slots in storage 72 This 5-axis OPS INGERSOLL 650 was manufactured in 2004, featuring a robust vertical machining center design. It boasts a travel distance of X: 700 mm, Y: 550 mm, Z: 450 mm, and a high spindle speed up to 42,000 rpm. The machine includes a 72-tool changer and supports a load capacity of 2000 kg. If you are looking to get high-quality milling capabilities consider the OPS INGERSOLL 650 machine we have for sale. Contact us for more information. Gsdpox D H Ugjfx Ag Djuk Application Types Milling

Condition: used, Year of construction: 1999, Belt conveyor combination 2 x GG 750-760/650 consists of 2 piece belt conveyors each with separate drive Make: Dematic Each conveyor belt length: 750 mm Total length of the combination: 1,550 mm Width: 700 mm Belt width: 650 mm Overall width: 760 mm Conveyor speed: v = 0,7 m/sec without supports without Guide other conveyor speed frequency converter .. Please ask if needed Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Guedpfxek Aa E Rs Ag Djk Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, machine/vehicle number: 005657, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 30 m/min Maximum panel thickness: 60 mm Operating Units: 13 nr Gjdpfx Aewcx Tuog Deuk

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Professional bottling machine Water4Life FDBG/650 from 2022, in excellent condition. Suitable for both carbonated and still beverages such as kombucha, kefir, soft drinks, juice, beer, etc. Technical details: 8-head isobaric filler Capacity: up to 600 bottles/hour Suitable for glass bottles from 330 ml to 750 ml Includes 2 rinsing stations and 1 sanitation tank Compact design, easy to clean and maintain Ideal for small to medium-sized beverage producers Reason for sale: Purchase of a larger line due to capacity expansion. Available from mid-January. Gjdpfxjxxib Se Ag Douk

Condition: used, Year of construction: 2004, operating hours: 78,000 h, 1.0 pc. used injection moulding machine with robot Gjdpexauycjfx Ag Djuk Manufacturer: DEMAG Model: SYSTEM 650/1000-5200 Year of manufacture: 2004 Clamping force: 650 tons Tie bar distance: 1,000 x 900 mm Screw diameter: 95 mm Shot volume: 2,835 ccm³ Shot weight: 2,560 g/PS Control: NC 4 Equipment: - Robot manufacturer: DEMAG, model: DR633-1131 S3, year 2004 - 4 core pulls

Condition: ready for operation (used), Year of construction: 1985, An old but functional Kallfass shrink-wrapping machine is available. Seal length: 600mm, max. passage height: 260mm, film thickness range: 12µm-80µm, max. belt speed: 12m/min, max. cycle rate: 20/min, sealing frame dimensions X/Y: 800mm/600mm, max. film roll width: 750mm, working height range: 870mm-970mm, tunnel width: 605mm, tunnel height: 400mm, max. film roll diameter: 300mm, max. film roll core diameter: 76mm. Machine dimensions X/Y/Z: approx. 3400mm/1300mm/1450mm, weight: approx. 750kg. The drive motor is taken out but included. An on-site inspection is possible. Gujdpfxoxvdfgs Ag Dok

Condition: ready for operation (used), Year of construction: 2011, Injection Unit Screw diameter 90 mm Screw speed 180 r/min Clamping Unit Clamping force 6500 kN Opening stroke 1650 mm Max open daylight 3650 mm Distance between bars 1160 × 960 mm Mould height min 400 mm Mould height max 2000 mm Ejector stroke 210 mm Ejector force for / back 150 kN This Engel DUO 4550/650 was manufactured in 2011. It features a clamping force of 6500 kN and a maximum opening stroke of 1650 mm. The machine supports a mold height ranging from 400 mm to 2000 mm and a platen size of 1510 × 1440 mm. The screw diameter is 90 mm, enhancing its injection capabilities. Consider the opportunity to buy this Engel DUO 4550/650 hydraulic injection moulding machine. Contact us for more information about this machine. Godpfx Aox D Sxqjg Deuk Application Types Injection Moulding

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 4,000 kg, Discover the GEA-CFS SuperFry 5000/650, an industrial fryer specially designed for large-scale continuous frying operations. Its stainless steel design guarantees robustness and durability, making it ideal for demanding food production environments. Thanks to its automated conveyor, it efficiently handles large quantities of food, ensuring even, precise cooking of products. What's more, the SuperFry is equipped with advanced control and safety systems. It allows precise adjustment of passage speed, ranging from 1.2 to 15 m/min, and frying time, from 20 to 250 seconds. As a result, it offers exceptional flexibility to adapt to the specific needs of each production run. In addition, optimized sediment management and oil circulation contribute to superior end-product quality. In terms of technical features, the machine has a power rating of 313 kW and operates at 3 x 400V, 50Hz. Its minimum oil volume is around 1,009 liters, with an oil level 2 cm above the conveyor. Weighing in at 4,000 kg, it is also equipped with electric elevators, a circulation pump and a sediment removal system. Finally, the 16 A amperage requirement testifies to its energy efficiency. Gjdpfju Hhvfex Ag Djuk This makes the SuperFry 5000/650 the ideal solution for companies wishing to optimize their frying processes while guaranteeing impeccable food quality and safety. Technical specifications: Manufacturer: GEA-CFS Type: SuperFry 5000/650 All stainless steel Capacity: 3 x 400V, 50Hz Power rating: 313 kW Adjustable speed Min. oil volume at 2cm oil level above conveyor: ± 1.009 L Weight: 4,000 kg Amperage: 16 A Frying time: 20-250 sec Conveyor speed: 1.2-15 m/min Electric elevators, circulation pump, sediment removal

Condition: used, machine/vehicle number: 005642, undefinedPosition 2: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 undefinedPosition 4: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Gusdewuciwspfx Ag Djk

Condition: used, all stainless steel electrically heated (= 300 kW) total power 313 kW nett belt length 5.000 mm nett belt width 650 mm frying time min/max : 20-250 sec throughput speed min/max 1,2-15 m/min min. oil volume at oil level of 2cm above the belt : ± 1.009 L max. oil level above the belt : 90 mm setting overheating protection : 220°C adjustable speed outfeed conveyor oil level control circulation pump sediment removal system filter lifting unit with electric hoists Gedpfjxp Hhksx Ag Dsuk weight : 4.000 kg capacity : 3 x 400V, 50Hz

Condition: used, Year of construction: 2002, Features: Condition: fully functional, with traces of use. Ideal for fast material transport Expertly disassembled and packaged Manufacturer: Transtechnik GmbH Year of manufacture: 03/ 02 Condition: Used Gsdpfxektf Nce Ag Djuk Model type: 110/ 650 total length: approx. 1120 mm total width incl. motor: ca. 830 mm total width without motor: ca. 730 mm belt width: approx. 650 mm Belt type: Smooth Color: Stainless steel-grey/ black Material: Stainless steel Drive type: Drum motor Belt conveyor Due to the excellent workmanship of the belt conveyor, your material glides smoothly to its destination, even under high loads. Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will be happy to prepare your individual offer or advise you on design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: ready for operation (used), Swing diameter over bed/cross slide: 650mm/430mm, distance between centers: 3000mm, bed width: 450mm, max. workpiece weight: 1800kg, spindle speed: 2000rpm, rapid traverse: 8m/min, feed rate: 2m/min, quill diameter: 105mm, quill stroke: 225mm, taper: MK5, tool stations: 8. Machine dimensions X/Y/Z: approx. 5300mm/2300mm/2200mm, weight: approx. 7000kg. Documentation available. An on-site inspection is possible. Godpfx Aexr Nvceg Douk

Condition: used, machine/vehicle number: 005637, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1300 mm Max feed speed: 50 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 12 nr Gedpovw Ev Hjfx Ag Deuk