Bed type milling machine

LAGUN BM 3C

Condition: used, Year of construction: 1992, spindle speed (min.): 7,500 rpm, spindle speed (max.): 24,000 rpm, 4 motorized grinding spindles (liquid-cooled, purge air / oil mist lubrication) including REFU HF frequency converter, e.g. for powering the spindles of a Voumard 400 CNC T4. Tsdpfx Ael Tn Afsmyoa Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Converter 316/25 High-frequency converter (inverter, frequency inverter) Frequency converter / inverter for powering motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional, sold as is – manufacturing year approx. 1992 A collection of various grinding spindle shafts / arbors for grinding wheels is available for these spindles and can be purchased separately. Price / details on request All technical data subject to error or omission. We sell exclusively to countries within the European Community.

Year of construction: 2016, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 6000 mm TRANSVERSAL TRAVEL: 1500 mm VERTICAL TRAVEL: 2500 mm RAPID FEEDS L-T-V: 35 m/min SPINDLE: 337- 5000 rpm; 42 kW; 1180 Nm Tedpfxjx Ru Azj Amysa WORKTABLE: 300 x 2500 x 7000 mm HEAD: ISO 50 ; MILLESIMAL POSITIONING ; A/B AXIS AUTOMATIC TOOL MAGAZINE: PICK-UP ; 12 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 20 Bar NOTE: AUTOMATIC HEAD CHANGE; COMPRESSED AIR INSIDE THE TOOL; RTCP; AUTOCAL SOFTWARE FOR AUTOMATIC CALIBRATION

Condition: like new (used), Year of construction: 2007, Retrofitted: 2026 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): 240 / 1240 mmDistance between columns: 2500 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 35500 KgMachine dimensions approximate: 10975 x 4770 x 5345 mm Accessories Guarding: 2 slidings doors and new perimetral wire-mesh fenceAutomatic tool changer: ATC-60 (sale option with no ATC)Chip conveyor: 1 transversalElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sale conditions Warranty: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features Todpfjyf Rrtsx Amyea

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New equipment, in stock, available for immediate delivery -Volume: 18,000 liters -Maximum temperature: 450°C -Internal dimensions (L x W x H): 4100 x 2100 x 2100 mm -External dimensions (with rails) (L x W x H with lifting door): 9970 x 3060 x 6110 mm -Control system: Eurotherm Nanodac -Temperature stability (at nominal temperature, without load): ±5°C -Automatic inlet and outlet dampers -Electric lifting door -Electrically driven furnace car -Power: 247 ± 9% kW -400 V, 50 Hz -Documentation, CE declaration We would be happy to offer installation and commissioning as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspections in our warehouse are available upon request! Furnace, furnaces, annealing furnace, firing furnace, hardening furnace, heating furnace, furnace, stress-relieving furnace, enameling furnace, drying furnace, industrial furnace, heating chamber, heating oven, temperature oven, drying cabinet, chamber furnace, large-volume furnace. Todpfx Aeu Hma Njmyea

Condition: excellent (used), Year of construction: 2007, Type: CNC Lathe (horizontal) Manufacturer: Spinner Model: TC 52 Year of manufacture: 2007 Serial number: 123445 Control: Fanuc Three-axis machine: XZ C (C-axis is positioning only – no driven tools) Bar diameter: 42 mm Three-jaw chuck: 165 mm Operating/spindle hours: approx. 32,500 h / 6,400 h (read 11/2025) Accessories: chip conveyor, high-pressure coolant (IKZ), chuck, documentation Condition: Good Todeyki Hmopfx Amyja

Condition: used, Year of construction: 2013, machine/vehicle number: 5279, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 22 rpm, Year of construction 2013 Control system: SIEMENS Sinumerik 840D pl HSK 100-A tool holder TRAVEL horizontal-longitudinal X = 8,000 mm Vertical headstock slide Y = 1,600 mm Headstock horizontal-transverse Z = 1,300 mm FUNCTIONAL PROBE: m&h HSK 100 SIEMENS B-MPI HAND-HELD CONTROL UNIT TRAVELING WORK PLATFORM 3-SIDED SPRAY AND CHIP PROTECTION WALL CHIP CONVEYOR SPRAYING PLATE Sizes: Length: 10,000 mm Width: 2,500 mm WASHING GUN IN THE WORKROOM REINFORCED COOLANT SYSTEM Pump capacity: 32 l/min at max. 20 bar Coolant tank: 2000 l COLLISION MONITORING SYSTEM 2 CHANNEL pcs. 2 monitoring channels: - 1st collision monitoring orthogonal milling head (channel 1) - 2nd collision monitoring fork head (channel 2) PENDULUM MACHINING 3 WORK AREAS MILLING SURFACE INTERPOLATION (TRAORI, 3D tool radius compensation, spline interpolation) ROTATED AXIS COORDINATE SYSTEM 2 PICK-UP STATION For fork head, arranged on clamping plate Storage positions 10 Maximum tool weight kg 12.5 Maximum tool length mm 200 Maximum tool diameter mm 63 Maximum tool diameter when free mm 250 Neighboring position Tool holder HSK 6 AUTOMATIC TOOL CHANGER Number of tools in chain magazine 48 Maximum tool diameter with magazine filled to mm 125 Maximum tool diameter with mm 250 free adjacent positions Maximum tool length mm 500 - Maximum tool weight kg 25 Maximum tool load torque Nm 40 Tool holder HSK 100-A HEAD CHANGE MAGAZINE 1 pc.FORK HEAD WITH HIGH FREQUENCY SPINDLE Todpfju Sppwex Amyja AUTOMATIC FORK HEAD WITH INTEGRATED HIGH-FREQUENCY SPINDLE - High-frequency milling spindle: - Integrated high-frequency spindle - Tool holder HSK - A 63 DIN 69893 - Main drive power 20 kW at 100 % ED or 25 kW at 40 % ED - Speed range up to 20,000 1/min - Motor spindle bearing with permanent grease lubrication - Sealing air seal - Torque: 40 Nm at 100% ED, 50 Nm at 40% ED - Automatic tool clamping - Power transmission according to speed-performance diagram GMN HCS 170 - Technical data according to data sheet E 745.1467.00 UNIVERSAL MILLING HEAD IN ORTHOGONAL DESIGN - Liquid-cooled milling head - Cast construction made of GGG 60 - Milling head, automatically swivels 180 x 1 degree - The resulting positions can therefore not only be approached via the CNC control, but also programmed and processed - Repeat accuracy at the spindle nose ±0.002 mm, part accuracy thus ±3 sec - HSK 100-A tool holder - The milling spindle is equipped with a hydromechanical quick tool clamping system - Tool pull-in force: 45 kN - Internal coolant supply form A-D - External coolant supply via shower ring - Speed range 22- 4,000 1/min MAIN DRIVE by a frequency-controlled liquid-cooled AC motor with - 32 kW drive power at 100% duty cycle, 46 kW at 40% duty cycle. Direct power transmission WITHOUT gearbox, therefore no heating or wear of a gearbox. - 637 Nm torque at 100% ED, 875 Nm at 40% ED

Condition: reconditioned (used), Year of construction: 2006, travel distance X-axis: 5,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 15 rpm, table width: 1,200 mm, table length: 6,000 mm, RepairFIT by Dornhöfer The difference. Including installation & commissioning! Machine year of manufacture: 2006 Capacities / Travel: Longitudinal (X): mm 5,500 Vertical (Y): mm 1,400 Lateral (Z): mm 1,000 Work table: Length: mm 6,000 Width: mm 1,200 Number of T-slots on the table surface: pieces 12 Width of T-slots: mm 22 Distance between slots: mm 100 Max. workpiece weight: kg 13,500 NC rotary table: Position: Right, flush integrated into the table surface Clamping surface: Ø mm 1,000 Positioning accuracy: ° 360x0.001 Max. workpiece weight: kg 3,500 Number of T-slots: pieces 9 Size of T-slots: mm 22 Distance of T-slots: mm 100 Paint finish: RAL 7035 light gray / RAL 5011 steel blue Tool interface: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% ED KW28 Tedpfx Ajy Tkgbjmyea Spindle speed range: Spindle speed: min-1 15 - 5,000 Torque: Nm 815 Feeds: X, Y and Z axis mm/min 2 – 10,000 Max. rapid traverse speed: X, Y and Z axis mm/min 25,000 Max. feed force: N 10,000 Footprint FLC6000: m (approx.) 11.0 x 5.6 Overall height: m (approx.) 3.5 Weight: kg approx. 35,000 HEIDENHAIN iTNC 530 HSCI Automatic MTE milling head, diagonal Automatic tool changer Chip conveyor Coolant system with 70 bar & (IKZ) RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are procured by us after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and errors were professionally repaired by our expert service team.

Condition: excellent (used), Year of construction: 1997, Indexing table 400 mm hand Set tooling included Table bore 10 - 130 mm Tedpjxclfzofx Amyea Key width from 2 - 32 mm Feed rate 0,5 - 5 M/Min; Table Ø: 690 x 460mm Table load: 2000 Ram adjustment:0 - 425mm Length: 1300mm Width: 1100mm Height: 1400mm Weight: 1800kg

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm min. workpiece diameter 10 mm workpiece length 1000 mm total power requirement 16 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m Tedpfx Amjwwl I Ieyoa The guides have been outdated 10 years ago

Condition: excellent (used), Year of construction: 2001, operating hours: 4,500 h, functionality: unexamined, machine/vehicle number: 090119, Manufacturing origin CE - Germany Voltage 400V Netweight 7500 kg Custom position 8458.91 20 Dimensions 2,9 x 2,3 x 2,3 m. 29731 hrs - work 4500h rs TECHNICAL DATA AXES Maximum travel X-axis 400 mm Maximum travel Y-axis 300 mm Maximum travel Z1-axis 475 mm Maximum travel Z2-axis 475 mm Relative positions B-axis 0,0001 – 360° Relative Position C1/C2-axis 0,0001 – 360° WORKPIECE Maximum cubic dimensions 80x80x80 mm Maximum weight 5 kg TURRET Number of stations 24 Number of controlled stations 18 Number of steady stations 6 Maximum tool attachment (round) Ø 20 mm Maximum tool attachment (square) 16x16 mm (20x20) Maximum trajectory of turret above tool’s point 500 mm Rotation speed of live tools 1-9000 min-1 SPINDLE Maximum rotation speed 6000 min-1 Maximum bars diameter Ø 42 mm Maximum forced chuck clamping 140 mm BARS MACHINING Maximum bar length for bar’s feed 1000 mm Maximum piece size for the bar taker Ø42 x Long.100 mm Maximum diameter of taker’s collets 42 mm Pulling and pressure force of clamping cylinder 20000N FEEDS X-axis advance force abt.895 daN Y-axis advance force abt.895 daN Z1-axis advance force abt.895 daN Z2-axis advance force abt.895 daN Fast moves axes X/Y/Z 20 m/min Motor’s torque of tool control 2,4 Nm Spindle S1 / Spindle S2 70Nm COOLING (values only as indication) Capacity of pump submerged inside chips conveyor 10 l/min for abt. 4,5 bar 80 l/min 3,2 bar 150 l/min 0,7 bar Capacity of overpressure pump inside conveyor 10 l/min 13,2 bar 50 l/min 9 bar 90 l/min 1 bar Lubricating coolant volume inside conveyor abt.134 L. Coolant volume inside cooling aggregate 45 L. NUMERIC CONTROL Siemens 840D MACHINING PRECISION Resolution axes X/Y/Z 0,1 µm Resolution axe B 0,0001° Resolution axe C 0,0001° Positioning precision 5 µm Repeatability 0,6 µm Tsdoht Hg Depfx Amysa Maximum error on workpiece’s concentricity 0,5 µm ELECTRIC Spindle 1 / Spindle 2 (at 100%) 11 kW Spindle 1 / Spindle 2 (at 40 %) 15 kW Advance motors axes X/Y/Z1/Z2 1,3 kW Axis B 1,3 kW Tool control 2,3 kW Hydraulic pump 7,5 kW Hydraulic back movement 0,75 kW Cooling aggregate fan 1 / 2 0,18 kW Circulation pump of cooling aggregate 1,1 kW Compressor of cooling aggregate 2,2 kW Chips ejector 0,25 kW Emulsion pump 1 1,1 kW Emulsion pump 2 2,2 kW Operation tension 400 V Network frequency 50Hz (60option) Control tension 24V DC Absorbed power 35 kW Nominal current 63A Connecting réseau TM / TT / IT PNEUMATIC Maximum operation pressure 10 bar Normal operation pressure 6 bar Minimal operation pressure 5 bar Air output env. 150 L/min Valves tension 24V DC Oil-mist lubrication tank capacity 12 L Quality level 2 selon Pneurop6611 NOISE LEVEL Normal use 78—80 dB errors and omissions excepted-data given without obligation Inventory no.2321018, machine equipped with : Chip conveyor Preparation for bar feeder Tool holders : 6 fixed drills ER32 8 turning tool holders 5 live tool holders ER32 4 live tool holders ER25 6 live tool holders ER20