Bed type milling machine

MTE BT3200

Condition: ready for operation (used), Year of construction: 2018, Machining sides: 3, workpiece materials: aluminium/steel, travel X: 4000mm, feed rate: 120m/min, A-axis: +/-110°, spindle speed: 18000rpm, tool holder: SK30, tool positions: 8, max. profile dimensions X/Y/Z: 4000mm/250mm/190mm, machine dimensions X/Y/Z: approx. 5750mm/2100mm/2350mm, weight: approx. 4000kg, control: Mecal. Documentation available. On-site inspection is possible. Fpsdpfx Ajyh Nv Hjaljg

Condition: new, Year of construction: 2024, functionality: fully functional, Incorrect investment by a corporation. Machine is new and unused (already delivered). The machine is available immediately with no lead time. An extremely rare opportunity. Machine type: Horizontal machining center with pallet changer Model series: NHX 8000 Control: Siemens S840Dsl with CELOS Measuring system: fully closed loop scale feedback (X/Y/Z) Machine concept: DCG Travel paths X/Y/Z: 1,400 / 1,200 / 1,350 mm Rapid traverse X/Y/Z: 50,000 mm/min Pallet system: Turn-type pallet changer Number of pallets: 2 Pallet size: 800 × 800 mm Pallet load: 2,200 kg [optional 3,000 kg] Max. workpiece Ø/H: 1,450 mm / 1,450 mm Pallet change time: 16 s B-axis: direct drive Minimum index: 0.001° Maximum speed: 100 rpm Spindle: powerMASTER Speed: 16,000 rpm Power: 85/50 kW (10% duty cycle / continuous) Fedpsxizdajfx Aalspg Torque: 549/279 Nm Taper: HSK-A100 Cooling: central spindle cooling Internal coolant: optional CTS 7 MPa Tool magazine: chain-type, 60 positions [optional 100/120] Rack magazine options: 180 / 240 / 330 positions Max. tool diameter with adjacent tools: 110 mm Max. tool diameter without adjacent tools: 320 mm [for >10,000 rpm: 230 mm] Max. tool length: 800 mm Max. tool weight: 30 kg Tool-to-tool: 1.9 s Cut-to-cut: 5.0 s Equipment / Options: - Workpiece probe - Tool measurement - Laser control (optional) - High-pressure coolant 7 MPa (optional) - Chip conveyor - Fully enclosed enclosure with roof Dimensions n.a. Weight n.a. Connection data n.a.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 10 cup wheels vertical glass edging machine with variable angle 0-45° actual running meters : 260.000 min. glass size : 40 x 40 mm glass thikness : 3 - 55 mm Fpsdpfx Aaow U Ddueljg speed : 0,4 - 6 m/min. voltage : 400 V 50 Hz 39 A weight : 4600 Kg

Year of construction: 2022, condition: like new (used), Piovan dryer SIST. DEUM. GMP150+2xPTUN2000 RAFFRED. Fodpfxevhb S Ss Aalopg GMP150+2xPTUN2000 COOLING SYSTEM As good as new, unused The PTUN... module is a single drying unit for plastic material. The machine consists of the following parts. - Hopper. - Holding frame. - Heating chamber. - Connection lines. - Air control valves.

Year of construction: 1976, condition: good (used), strip width: 300 - 1.350 mm strip thickness: 0,35 - 3 mm Fpodsbh Ubwspfx Aalsg coil weight: 12,5 t mandrel Ø: 508 mm

Condition: refurbished (used), Measuring Range X/Y/Z = 900 x 1200 x 850mm Accuracy 4,0 + 4,5L/1000 (origin setup, now better after Retrofit) Completely refurbished 2018 with new Pantec Eagle Pro Controller Probesystem is Renishaw PH10MQ and SP25M Software Inspect3D Inca Premium actual version Computer is a HP z240 Option : Fpsdpfodpak Rsx Aalsg Laserscanner (e.g. Kreon) Probe changer

Condition: ready for operation (used), Year of construction: 2011, operating hours: 35,044 h, spindle speed (max.): 10,000 rpm, total height: 3,000 mm, total width: 2,500 mm, overall weight: 11,000 kg, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle motor power: 16,800 W, product length (max.): 2,500 mm, table load: 500 kg, tool weight: 8,000 g, number of slots in tool magazine: 82, number of axes: 5, This 5-axis HERMLE C40U Dynamic universal machining centre was manufactured in 2011. It features a travel of 850 mm in the X-axis, 700 mm in the Y-axis, and 500 mm in the Z-axis. The machine has a maximum spindle speed of 10,000 rpm and a magazine capacity of 38 positions plus 43 additional. If you are looking to get high-quality machining capabilities, consider the HERMLE C40U Dynamic machine we have for sale. Contact us for further details. • Utilization: 70% • Shifts: 2 • Operating hours: 35,044.4 h • Rotary table diameter: 420 mm • Clamping surface diameter: 420 mm • Spindle: • Power at 40%: 1500 rpm = 25 / 16.8 kW; 10,000 rpm = 7 kW • Torque at 40%: 1500 rpm = 159 / 107 Nm; 10,000 rpm = 6.7 Nm • Tooling/magazine: • Number of revolvers/magazines: 2 • Magazine capacity: 38 positions • Additional magazine + 43 positions • Maximum tool length: 300 mm • Maximum tool diameter: 140 mm • Knoll Cooling • Renishaw OMP 40 probe • IKZ (inner cooling through spindle) • Laser beam monitoring • Chip conveyor • SK 40 • Operating voltage 400 V/3~ • Mains frequency 50 Hz • Control voltage 24 V- • Total nominal current 60 A • Total performance 41 kVA Additional equipment Fpedpsy Al Ufjfx Aaljg • OPTIONAL for an additional charge: Tooling package available: approx. 530 tools • OPTIONAL for an additional charge: Zero-Point Clamping SystemMachine was maintained in 2025 by HERMLE officialIn August 2025, the spindle head was replaced and the geometry was checked and adjusted again by HERMLE official Technical Specification Taper Size SK 40

Condition: excellent (used), Make: HEYLIGENSTAEDT Type: NDC 710 / 1800 Control: R&D MTC3 4 Chuck 1400 mm Steady rest 3 units Ø 100-1050 Roller steady open 2 units Ø 1120 KNOLL Chip conveyor 2022 Boring bar Ø 260 x 3500 mm Boring bar Ø 200 x 1500 mm Boring bar Ø 150 x 1100 mm Fpjdpfxjwzh A Aj Aalog DBC Turning Length: 8250mm Swing over bed Ø: 1400mm Swing over cross slide Ø:1120mm Spindle power: 100kW Workpiece load: 16000 Length: 14000mm Width: 3500mm Height: 2900mm Weight: 32000kg

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table length: 4,000 mm, table width: 1,500 mm, tank capacity: 500 l, SHW PowerSpeed 5 Travel Ranges • X-axis (bed): 4,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (spindle horizontal): 1,300 mm Control System • CNC control: Heidenhain iTNC 530 Feed Speed • X, Y, and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal Milling Head in Orthogonal Design • Milling head swivel range (mounting): 360 x 1 degree Fedpfsw I Rz Hex Aalspg • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm o Short-term: 36 – 6,000 rpm Automatic Tool Changer • Tool magazine for 48 tools Clamping Plate • Clamping surface: 4,000 x 1,500 mm Chip Conveyor • Fork length: 4,000 mm Coolant System • Tank capacity: 500 l Splash and Chip Protection • One-sided, with 2 manually sliding doors About the Company MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among others, spare parts delivery, on-site customer service, machine overhauls, and control system modernization. Services: - Used machines - Spare parts - Customer service - Machine servicing - Machine overhauls - CNC control modernization ----- _____ Used machine – used milling machine – used traveling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used cnc milling machine – used boring and milling machine – used metal milling machine – used metal mill – used metal machining center – used cnc mill – cnc milling machines – milling machinery – large part machining – cnc large part machining – milling – shw – PS5 – PS 5 – Powerspeed – SHW PSZ 5 – SHW Powerspeed – SHW Powerspeed 5 – PSZ 5 – Heidenhain – MBM milling machine – MBM machine – column-type milling machine

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT50 - Spindle power : 45 [kW] - Spindle speeds : 12000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 1700/1400/1240 [mm] - Rapid traverses rates (X/Y/Z) : 48 [m/min] - Cutting feed rates (X/Y/Z) : 20 [m/min] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 - Tool exchange time : 6 [sec] PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 1250/1250 [mm] - Pallets number : 2 - Maximum weight upon pallet : 3000 [kg] - Distance table center / spindle nose (min./max.) : 70-1470 [mm] - Maximum workpiece diameter : 1970 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine weight : 32500 [kg] MACHINE HOURS - Number of hours under power : 34422 [h] Fedpfxew D Hwwo Aalspg EQUIPMENT - CNC : Fanuc 31i-model B5 Interface : Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 70 [bars] * Coolant through spindle * with paper filtering unit * with cooling unit for coolant * With cabin washing - Chips conveyor - Tool probe - Workpiece probe : Renishaw RMP60 - Electric transformer