Used Barford Sx 6000 for sale (2,563)

Condition: used, Year of construction: 2011, capacity / hour ca.: 6000 Gjdpfx Aozzpl Aek Uobt working direction: left-right Strom / Volt: 14 Technical data: working direction: left-right, rotative, clockwise capacity bph max.: 6000 labels: hot melt labels number of labelling stations: 1 number of bottle plates: 8 motor height adjustment: yes speed adjusment: frequence converter

Condition: repair required (used), Year of construction: 2009, operating hours: 4,131 h, functionality: limited functionality, number of ink cartridges: 8, color channels: 8, number of print heads: 1, We are selling our Epson printer, which is no longer needed. It has been stored in our warehouse for a few years and was used to print photos in the garage. The print head is likely defective, and it does not recognize the cartridges on the left side, indicating that they are empty, even though they are full. Includes software and automatic paper roll feed. I did not connect it to the network, so I can only provide the number of pages printed: 4131 pages. Sold as is, with defects. Gbodpfx Akezi Svme Uot We didn't use it much because we mostly print on our plotter. Inspection is possible.

Condition: good (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: D1101C3066, laser type: CO₂ laser, laser power: 6,000 W, total length: 1,145 mm, total width: 1,035 mm, total height: 620 mm, Equipment: CE marking, TruFlow 6000 laser resonator by Trumpf for sale. Godpfx Ajyt Dchok Uebt The resonator is in good used condition and operates flawlessly. Two identical units are available (price is per unit).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, laser power: 3,200 W, sheet thickness (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Combined punching/laser operation: 3,000 mm × 1,500 mm Punching operation: 3,000 mm × 1,500 mm Laser operation: 3,000 mm × 1,500 mm Working area without repositioning: Large format Gbsdpszyay Ijfx Ak Ujt Sheet metal thickness, structural steel max.: 8 mm Sheet metal thickness, stainless steel max.: 8 mm Sheet metal thickness, aluminum max.: 4 mm Maximum punching force: 220 kN Maximum punching speed (at 1 mm stroke): 900 strokes/min Maximum marking speed: approx. 2,800 strokes/min Maximum axis speed: 108 m/min Axis speed: simultaneous in X and Y axes Tool magazine: Linear magazine with multi-tools Maximum number of multi-tools: 18 Clamps: 3 Tool positions: 180 MACHINE DETAILS Laser source: Trumpf TruFlow 3200 CO₂ laser Laser power: 3,200 W Operating hours (as shown in the photo) Beam on hours: 12,716 h Laser on hours: 73,705 h EQUIPMENT SheetMaster with two large-format tables Automatic scrap sheet disposal onto lifting table

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, The equipment is available for sale as a complete system or in individual parts/components. DIP-TECH AR 6000 digital glass printing system, manufactured in 2013, with an integrated drying module. The machine can be dismantled and sold as spare parts. This is the last opportunity to purchase a complete, fully operational system. Please contact us for further information, specifications, photos, available components, and pricing. Technical specifications: • Max. glass size: 3000 × 6000 mm • Min. glass size: 500 × 500 mm • Glass thickness: approx. 4–19 mm • Printing technology: Digital ceramic ink printing directly onto glass • Drying module: Integrated dryer included • Ink type: Ceramic inks – suitable for tempering • Printing technology: Digital ceramic in-glass printing • Application: Architectural and interior glass • Glass types: Float, tempered, laminated Key Advantages: ✔ Large-format industrial printer (6-meter capability) ✔ Integrated drying module – faster production cycle ✔ Improved ink stabilization before tempering ✔ Reduced print defects and handling risks Gbodjymb Tqjpfx Ak Uot ✔ Suitable for façade, architectural, and interior glass ✔ Machine in production – ready for immediate operation

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 60944, Year of construction: 2007, operating hours: 3,334 h, load capacity: 6,000 kg, lifting height: 5,100 mm, free lift: 2,634 mm, fuel type: electric, fork length: 1,390 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 5,100 mm Free lift: 2,640 mm Lifting capacity: 6,000 kg Fork length: 1,390 mm Fork width min.: 450 mm Fork width max.: 1,110 mm Travel direction: 2 travel directions MACHINE DETAILS Mast type: Duplex Drive type: Electric Battery voltage: 80 V Operating hours: 3,334 h Dimensions & Weight Gjdpfszza Tdex Ak Ujbt Dimensions (L x W x H): 3,230 x 1,890 x 3,800 mm Unladen weight: 7,740 kg EQUIPMENT Fork adjustment Work light Joystick Camera Half cabin User manual available CE marking

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown Gjdpfx Aezv Sarok Uobt - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034613, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max. Feed Speed: 30 m/min - Max. Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Rear extraction with self-centering extractor or front ejection. - Repositioning System: Optional rail allows axial or radial displacement up to 600 mm for lathe access. - Automation: Fully PLC controlled, with brushless motor and digital pneumatic valves for speed and thrust control. - Bar Storage: Single-level magazine, 235 mm capacity. Bar feeder details: TOP Automazione model: FU 352 Gbedpfx Akexx Sclo Ust Semi-automatic Bar Feeder for Horizontal Loading to Lathe (Autonomy depends on bar diameter) Dimensions: Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: - Digital HMI controller for manual operations Machine status: - In working condition

Condition: ready for operation (used), Year of construction: 2022, operating hours: 715 h, controller manufacturer: SIEMENS, laser power: 3,000 W, punching force: 18 t, sheet thickness (max.): 6 mm, overall weight: 18,500 kg, total width: 9,945 mm, total height: 2,500 mm, product length (max.): 8,862 mm, number of axes: 3, This 3-axis TRUMPF TruMatic 6000-1600 fiber was manufactured in 2022. It features a maximum laser power of 3,000 W and a punching force of 180 kN, with a maximum punching frequency of 917 strokes/min. The machine has a large working area, allowing for combined punching and laser processing. If you are looking to get high-quality punching and laser cutting capabilities, consider the TRUMPF TruMatic 6000-1600 fiber machine we have for sale. Contact us for further details. • Laser source: TruDisk 3001 solid-state laser, 3,000 W, fiber-optic beam delivery (10 m), compact cutting head, anti-collision, protective glass, closed beam guidance, programmable cutting gas pressure • Control/OS/Interface: Rexroth IndraMotion MTX CMP70; Windows Embedded; 17-inch touchscreen; 4 GB program memory; 320 GB HDD; USB; RJ45 10/100 Mbit/s; Internet teleservice; integrated technology database; NC program management; production planning; automatic machine shutdown; network connection for programming/production systems • Working area: • Punching (no reposition): 3,050 x 1,550 mm • Laser cutting (no reposition): 3,050 x 1,550 mm • Combined (no reposition): 2,500 x 1,550 mm • Combined (with reposition): 3,050 x 1,550 mm • Max sheet thickness: 6.4 mm; Max workpiece weight: 230 kg • Max part size via flaps: 500 x 500 mm (laser) / 500 x 500 mm (punching); via chute: 80 x 50 mm • Axes/performance: • Drives: Maintenance-free AC servo motors (X/Y/C); electrohydraulic punching head • Max speeds: X 90 m/min; Y 90 m/min; simultaneous 108 m/min; C-axis 330 rpm (punching/thread forming) • Frequencies: Max punching at E=1 mm: 917 strokes/min; marking: 2,800 strokes/min • Accuracy: Pa ±0.1 mm; Ps ±0.03 mm; min increment 0.001 mm • Punching unit: • Force: 180 kN; electrohydraulic head; rotary single-station tool holder • Tool circumferences: punching 76.2 mm; forming 101.6 mm; optional 110 mm • Change times: basic 3.2 s; MultiTool 0.3 s • Magazine: 25 linear positions; standard 22 tools; up to 220 with MultiTool • Clamps: 3 hydraulic; fully rotatable tools; programmable blank-holder; tool length compensation; punch lubrication; chip extraction with automatic tube emptying and fill-level estimation; stroke counter; tool lubricant level monitoring; WhisperTools compatible • Forming/punching functions: • MultiTool; MultiBend; thread forming (M2.5–M10); surface marking/embossing; vertically movable clamps • Max MultiBend: width 55 mm; height incl. material 25 mm; angle up to 90° • Automatic thread-forming lubrication; thread counter • Laser cutting capability (max thickness): • Mild/structural steel: up to 6 mm (O2 or N2) • Stainless steel: up to 6 mm (N2) Gsdpfjzul Dzox Ak Ujbt • Aluminum: up to 5 mm (N2) • Laser functions: NitroLine; FocusLine; FastLine; FlyLine; ControlLine; slug detection; ejector cylinder for laser-cut parts; laser event log; automatic cutting-head height adjustment • Standard machine equipment and safety: • Rigid C-shaped welded frame; coordinate guide system; linear tool magazine • 3 hydraulic clamps; programmable repositioning; foot switch for clamp closing • Radiation protection at cutting head; two 500 x 500 mm part flaps with sensors • Ball tables; two finished-part containers; chip container • Compact dust extraction and filtration unit • Water-air cooling unit (machine and laser) • Initial hydraulic oil filling • Two-level safety light curtains; fast drive shutdown; protection against scattered laser radiation

Condition: ready for operation (used), Siemens SITRANS F C MASS 6000 FDK:083H0204 SN 134335N324, used, in good condition, 100% functional, delivery as per photos Gedsz Act Nspfx Ak Usbt

Condition: ready for operation (used), Siemens SITRANS F C MASS 6000 FDK:083H0204 SN 134835N324, used, in good condition, 100% fully functional, delivery as shown in the pictures. Gsdpfx Akjz Acuas Uebt

Condition: good (used), Year of construction: 2024, Manufacturer: ERMAKSAN Fibermark | Model: Fibermark SM 6000 3X1.5 Gen-5 | Serial Number: 33122-ERH | Year of Manufacture: 2024 | Working area: 3000 x 1500 mm; Resonator: 6000 Watt IPG-YLS fiber laser technology | Max. peak power: 6000 W | Laser wavelength: 1075+/-5 μm | Axes: X-U-Y-Z | Max. axis speed: 100 m/min | Acceleration: 2.5 G | Voltage: 380 V | Power: 28 kW | Protection class: IP 65 | Dimensions (approx.): 5295 mm x 2325 mm x 10360 mm (W x H x L) | Approx. weight: 14590 kg | Colour: Black-White-Orange | Structure: Steel | Working area: 3x1.5 meter laser processing field | The specified dimensions are approximate values. All other details are without guarantee. Gbsdpfx Asy N Dkfek Uot

Condition: like new (used), Year of construction: 2020, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 5645, travel distance X-axis: 6,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,600 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, total length: 6,550 mm, table length: 2,500 mm, table width: 2,500 mm, total width: 15,900 mm, spindle speed (max.): 4,000 rpm, total height: 11,500 mm, overall weight: 57,000 kg, working range: 2,500 mm, grinding spindle motor power: 46,000 W, Ladies and Gentlemen, Gbsdpfx Akottri To Uot Enclosed we advertise our portal bed milling machine. Installation winter 2019/2020. 12,000 operating hours. Price on request. The machine is currently still in operation. The price is for the machine only. Dismantling, transportation and installation are the responsibility of the buyer. We are looking forward to serious inquiries. Many thanks in advance.

Condition: good (used), Year of construction: 1995, operating hours: 1 h, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Gbodpfxszzdb Ee Ak Uet Additional information - Specification - Back stop - Roll shelf

Condition: used, Year of construction: 2016, HEIGHT OF CENTERS 550 MM PERMITTED DIAMETER OVER BED 1100 MM PERMITTED DIAMETER OVER CARRIAGE 720 MM BED WIDTH 690 MM SPINDLE BORE 160 MM SPINDLE NOSE ASA 11" ROTATION SPEED 0 - 800 RPM 3 RANGES SPINDLE MOTOR POWER 39 KW AUTOMATIC RAPID TRAVEL 7 M/MIN C-AXIS Gbodpfxszwlufj Ak Uot Y-AXIS +/- 60 MM PERMITTED WEIGHT BETWEEN CENTERS 10000 KG PERMITTED WEIGHT BETWEEN CENTERS WITH STEADY REST 12000 KG TAILSTOCK CONE 6 CM TAILSTOCK SLEEVE DIAMETER 140 MM WEIGHT 16,000 KG CNC D. ELECTRON Z 32 ELECTRONIC HANDWHEEL SELF-CENTERING CHUCK, DIAM. 500 MM PLATEU DIAM. 1000 MM BARUFFALDI TBMA Y C 250 MOTORIZED TURRET WITH 12 POSITIONS VDI 50 CHIP CONVEYOR AUTOBLOK RX 6 HYDRAULIC STEADY, RANGE 85 - 505 MM YOM 2016

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 8,000 kg, spindle mount: MK 6, The PORĘBA TPK-90/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: available within 3 to 3,5 months, will be generally overhauled for Customer´s order Technical data: - distance between centers/turning length: 6000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg Gbodpfxezwfc Nj Ak Uet - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 8500 mm width: 1800 mm height: 1800 mm total weight: 8000 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, laser power: 6,000 W, CNC Laser Cutting System TruLaser 3040 Fiber (L81) 6000 Watt X Working area max.: 4000 mm Y Working area max.: 2000 mm Z Working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Operating hours: 18581 hrs. Laser beam on: 13125 hrs. Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 25 mm Sheet metal thickness copper max.: 10 mm Standard Equipment Machine: Working area: 3000 x 1500 mm Closed machine frame Cooling unit for machine and laser (water-air) Longitudinal conveyor Motion unit for highly precise machining Work area lighting Position laser diode Spray device Automatic nozzle cleaning Gantry drive in combination with linear direct drives Integrated control cabinets Integrated cabinet Closed beam guidance via laser light cable (LLK) Machine status indicator Machine ambient temperature 5 to 35 °C Laser: Excitation via pump diodes Laser power control Cutting head: 1-cutting head strategy Universal cutting head with adaptive lens system Protective glass Online condition monitoring of the protective glass Control system: Fast reproduction Control system SINUMERIK 840D SL Ergonomic control panel with 21.5″ wide-screen multi-touch color display Integrated technology data Copper cutting package • Cutting data O2 and N2 Brass cutting package • Cutting data N2 Automatic shutdown Programmable cutting gas / pressure selection Microweld Remote support interface Multi-sheet processing (• Not possible in combination with automation) Condition Guide Functions: AdjustLine ControlLine FastLine FlyLine NitroLine PierceLine (• Additionally available from TruDisk 6001: Regulation and monitoring of the piercing process) FocusLine Data transmission: USB interface RJ-45 network interface Central Link Online Update Manager • Automatic download of updates via remote support connection • Installation of the updates when the machine is switched on or by the customer or by TRUMPF service • To use, the Online Update Manager must be activated; deactivation is possible at any time by the customer. Safety: CE marking Light curtains Multi-chamber extraction system Machine enclosure with certified viewing pane, door on the right Gsdpfozln Udex Ak Uebt Extended Standard Equipment: Compact dust collector Sliding roof Automatic pallet changer in the longitudinal direction Support rails made of structural steel External solid-state laser TruDisk 3001 with 1 LLK output Power supply for TruDisk via the machine - External solid-state laser TruDisk 6001 - BrightLine fiber - Nozzle changer - Copper cutting package - Brass cutting package - Mobile Control App - Viewing pane, door on the left - HighSpeed Eco - RCI interface - CoolLine - DetectLine

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 17370, functionality: fully functional, TIGER 352 SX EVO - SEMI-AUTOMATIC HIGH-CAPACITY > The robust cast iron frame absorbs vibrations and ensures consistent cutting quality as well as a longer service life for the saw blade. > The two-stage gearbox ensures high cutting performance and rigidity. > The pneumatic vertical vice ensures efficient and secure clamping, even when cutting pipes. Gedpfx Akjy T Eh Tj Uobt > The control panel, equipped with a thermal relay and minimum voltage coil, guarantees the highest level of protection. In combination with an automatic pusher stop and label printing, the machine is the optimal solution for sawing your reinforcing steel in PVC window construction. The machine is still in use until June. It can be inspected at the customer's site in 49811.

Condition: used, Year of construction: 1993, functionality: fully functional, SEGATRICE usata SEMIAUTOMATICA, A DISCESA VERTICALE, TAGLIO A 60° DX-SX, da 1000x600,BIANCO BTM 100.60 dx- sx. Gbedpfxjzhunve Ak Uot TAGLIO A 60° DX-SX, da 1000x600, PREZZO MACCHINA VISTA E PIACIUTA,DA REVISIONARE. POSSIBILITA' DI REVISIONARLA A NUOVO

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Oven/frying line Alco AGU 600/6000-E year of construction 2017 and has only been used for a short time of production around 120 000 kg of meat balls since new! Belt width: 60cm Power: 148kW Gjdpfoydpagsx Ak Ujbt

Condition: excellent (used), Year of construction: 2014, functionality: unexamined, workpiece weight (max.): 2,500 kg, total width: 3,200 mm, total length: 15,800 mm, distance between centers: 6,000 mm, workpiece diameter between centers: 850 mm, overall weight: 19,000 kg, We offer this very good Hol-Monta spol.sro UB 85 / 6000 CNC cylindrical grinding machine, year of construction 2014. Model: UB 85 / 6000 CNC Gsdpfxey Hgrgj Ak Usbt Control type: Kavalir K 51-2 Serial number: H 214 09 005 Swing dia. 850 mm Center distance 6 000 mm Internal Grinding attachment Steadyrests etc.

Condition: good (used), functionality: fully functional, Machine specifications: Nominal forming force: 125 tons Table length: 6000 mm Distance between uprights: 4950 mm Godpszpx D Rsfx Ak Ujbt Overhang in uprights: 320 mm Description: The machine is in good technical condition; testing is possible by prior arrangement. Delem DA 41. More technical details can be found in the last photo.

Condition: used, functionality: fully functional, High frequency welding machine Kiefel KH 6000 C-Press height adjustable Generator Kiefel G 20000 SB Gbedpfev A Uddsx Ak Ust Table size 1350x800 mm

Condition: used, Year of construction: 1994, operating hours: 34,000 h, machine/vehicle number: LC613, Used line tetra pak TBA 8 - 1L slim 6000 PPHTechnical Specifications & Performance DataThis second hand complete bottling line is engineered for industrial packaging of aseptic carton containers, centered on the renowned Tetra Brik Aseptic platform. Designed for beverage production environments that demand hygiene and reliability, it provides end-to-end handling from aseptic filling through cap application to final case packing. As a used bottling line, it offers a cost-effective route to expand capacity while maintaining quality standards.Main filler: Tetra Brik Packaging Systems AB TBA 8 / 1000 SLIMConstruction year (main filler): 1994Package format: 1.0L Slim cartonSpeed: 6000 Packs/hour (PPH) Auxiliary equipment: Tetra Pak Cap Applicator 21; Tetra Pak Cardboard Packer 70Line application: Aseptic carton filling with downstream capping and case packingCompliance: CE markedAdvanced Automation & Control SystemsThe line leverages factory-integrated automation from the Tetra Brik Aseptic platform, designed for consistent performance and operator-friendly control. Safety interlocks and guarded access points support secure operation during beverage production. Standardized control architecture streamlines start-up, shutdown, and recipe management for the 1.0L Slim carton format.Centralized operator interface for coordinated filler, capper, and packer functionsAutomated sequences for aseptic filling and downstream handlingSafety circuits and emergency-stop devices for protected operationDesigned to support quick diagnostics and routine maintenance tasksProduction Line Integration CapabilitiesThis used bottling line integrates aseptic filling with cap application and case packing to create a cohesive industrial packaging solution. It is suitable for beverage production environments requiring carton handling and end-of-line packing. The cap applicator 21 and cardboard packer 70 are configured to work inline with the TBA 8 / 1000 SLIM, minimizing transfers and ensuring stable throughput.Inline configuration from filler to cap applicator to case packerOptimized for 1.0L Slim carton containersCompatible with standard conveyor and accumulation layoutsDesigned for inline operation; can be adapted to existing conveyor systemsMachine Condition & Maintenance HistoryOffered as a second hand, complete bottling line in working condition and ready for operation. It presents an efficient option for facilities seeking a pre-owned aseptic carton solution without the lead times typical of new equipment. Routine recommissioning and line integration services are recommended according to site standards.Operational status: Ready for operationCommercial status: Used/second hand industrial packaging lineOperational Performance & VersatilityThe TBA 8 / 1000 SLIM is a proven aseptic filler for carton containers, engineered for stable, hygienic beverage production. Downstream, the cap applicator 21 ensures accurate closure application, while the ... Gsdpfxeyvpt Ej Ak Uobt

Condition: good (used), overall weight: 42,000 kg, total width: 2,800 mm, total length: 12,400 mm, total height: 5,100 mm, BOLDRINI RIBO 30HY/6000 – Flanging & Dishing Machine Manufacturer: BOLDRINI (Italy) Model: RIBO 30HY/6000 Type: Hydraulic Flanging & Dishing Machine Max. workpiece diameter: 6,000 mm Maximum plate thickness: 30 mm (cold forming) Year: 2002 Application: Dishing and flanging of tank heads, pressure vessel ends and dished ends. Length:12400mm Gjdpfx Aezilu Aok Usbt Width:2800mm Height:5100mm Weight:42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!