Used Barford Sx 6000 for sale (2,375)

Condition: refurbished (used), battery capacity: 750 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,026 mm, total width: 996 mm, Tested forklift battery for your forklift - 80V 6PZS 750Ah - DIN A + 1-year warranty + incl. Aquamatik (automatic water filling system) + incl. end discharge connector & REMA 320 plug (other plug types can be installed as needed) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,026 mm Width 996 mm Height 627 mm Weight: approx. 1,730 kg Compatible with the following models and others: Toyota 7FBMF30 Toyota 7FBMF35 Crown TSP 6000-D Crown TSP 7000 Common battery sizes available, please inquire. Cedpfxey Rnp Ie Am Usrc Transport possible.

Condition: new, Year of construction: 2024, Conveyor belt: hydraulic folding in and out Scraper: front and rear scraper Conveyor belt length: 25.000 mm Engine: Caterpillar 4.4 Fixid Speed Engine 133 HP Cjdpfx Amjikqxtj Ujrc Crawler track: floor plates 400 mm Discharge height 22,5° / 27,5°: 8.8200 / 11.000 mm Conveyor belt width: 1.200 mm Feed hopper: Capacity 8 m³

Condition: good (used), Year of construction: 2023, operating hours: 1,031 h, functionality: fully functional, overall weight: 18,999 kg, Belt width: 1,200 mm Belt length: 30,500 mm Dimensions in working position: 28,219 x 2,489 x 12,268 mm (L x W x H) Discharge height at 22° inclination: 12,268 mm Engine manufacturer: Cat C2.8 Operating weight: 18,999 kg Codsyw Hluspfx Am Uorc Transport dimensions: 16,078 x 2,489 x 3,149 mm (L x W x H) Engine power: 55 kW Throughput: approx. 700 t/h

Condition: new, Year of construction: 2025, functionality: fully functional, air demand: 200 m³/h, total width: 2,400 mm, total height: 2,350 mm, total length: 3,500 mm, Cartridge filter system MBX-6000 with 8 cartridges. Suitable for filtering all types of dust, e.g. wood, sand, etc. Effective air output: 6000 m³/h, electric motor 9 kW, 3x400 Volt, 50Hz, filter area: 104 m² (8x13 m²), filter class: M, according to DIN 60335, filter cleaning: pneumatic, 10 min run-on. Dust containers: 4 pcs, each 30 liters. Clemco blasting pot (used), 100 liters Cedpfxjx Ai Hps Am Ujrc Screw compressor Renner RSK 1-30, year of manufacture 2020, 1178 operating hours.

Year of construction: 2020, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: KE-TR6536-C-A-442, Stockpile conveyor for direct feeding via crushing / screening plant. TECHNICAL DETAILS stockpile capacity: up to 300 t/h at an angle of repose of 37°. Bulk density: 1,7kg/dm³ stockpile capacity (rotation 0°): 2500 t stockpile capacity (rotation 90°): 8500 t stockpile capacity (rotation 180°): 15000 t Feed size: 0 / 200mm Conveyor belt length: 18252 mm (AA) conveyor belt width: 900 mm Discharge height: max. 8320 mm Rubber belt: 3 ply smooth including conveyor belt scraper track length: 2500mm Crodemv E Igopfx Am Uec plate width: 400mm Perkins diesel engine: 37kW own weight: approx. 8000kg FURTHER - Cable remote control for crawler - head piece hydraulically foldable - central lubrication point

Year of construction: 2022, operating hours: 0 h, condition: new, functionality: fully functional, Stockpile conveyor for direct feeding via crushing / screening plant. Machine is unused and new! TECHNICAL DETAILS stockpile capacity: up to 300 t/h with angle of repose 37°. Bulk density: 1,7kg/dm³ stockpile capacity (rotation 0°): 2500 t stockpile capacity (rotation 90°): 8500 t stockpile capacity (rotation 180°): 15000 t Feed size: 0 / 200mm Conveyor belt length: 18252 mm (AA) conveyor belt width: 900 mm Discharge height: max. 8320 mm Rubber belt: 3 ply smooth including conveyor belt scraper track length: 2500mm plate width: 400mm Perkins diesel engine: 37kW own weight: approx. 8000kg Credopdqr Eopfx Am Uoc FURTHER - Cable remote control for crawler - head piece hydraulically foldable - central lubrication point

Condition: good (used), Year of construction: 2008, operating hours: 21,000 h, Screw compressor, Kaeser, Aircenter SX 6, compact all-in-one solution – used: Price ex works: €5,950.00 (net)! Manufacturer: Kaeser Type: Aircenter SX 6 Year of manufacture: 2008 Serial number: 1008 Rated power: 4.0 kW Motor speed: 2,910 rpm Crodpfezbyc Hex Am Ujc Max. operating pressure: 8.0 bar Ambient temperature: 3°C / 45°C Compressed air tank: 200 L Sound pressure level: Total weight: approx. 290 kg Dimensions (W x D x H): Width (mm): 590 Depth (mm): 1090 Height (mm): 1560 Options: K1 (refrigerant dryer) / T2 (voltage supply/transformer) Operating hours: approx. 20,210 h (as of April 21, 2026) Condition: good Available: from approx. August 2026 Location: Leipzig

Condition: good (used), Year of construction: 2013, operating hours: 48,000 h, Screw compressor, Kaeser, Aircenter SX 4, compact all-in-one solution – used: Price ex works: €4,500.00 (net)! Manufacturer: Kaeser Type: Aircenter SX 4 Year of manufacture: 2013 Rated power: 3.0 kW Motor speed: 2,910 rpm Max. operating overpressure: 8.0 bar Cjdpfx Amezbycto Uerc Ambient temperature: 3°C / 45°C Compressed air tank: 200 liters Sound pressure level: 60–61 dB(A) Total weight: approx. 285 kg Dimensions (W x D x H): 590 x 1090 x 1560 mm Options: K1 (refrigerant dryer) / T2 (voltage supply/transformer) Operating hours: approx. 46,997 h (as of April 21, 2026) Condition: good Available: from approx. August 2026 Location: Leipzig

Condition: new, Heidenhain ROD 260 6000 01-03 angle measuring device, . 331 881-35 , SN:10330464 , unused with signs of storage, 100% functional, scope of delivery as per photos Crjdoi Eavzepfx Am Uoc

Condition: new, GMN TSE 110 - 6000 / 1.75 high-speed spindle, SN:R346575, unused in opened original packaging, 100% functional, scope of delivery as per photos Crsdpfoi Eaaisx Am Uoc

Condition: new, GMN TSE 95 - 6000 / 1.1 grinding spindle SN:339464, unused in opened original packaging, 100% functional, scope of delivery as per photos Crsdpfoi Eabvox Am Uoc

Condition: new, GMN TSE 100cg-6000 / 125 high-speed spindle SN:R358399, unused in opened original packaging, 100% functional, scope of delivery as per photos Cedpfoi Eaabex Am Uorc

Condition: new, GMN TSE 100cg-6000 / 1.25 high-speed spindle SN:R358699, unused, 100% functional, scope of delivery as per photos Cedpfx Aji D U U Tjm Uorc

Condition: new, GMN TSE 110-6000 / 1.75 high-speed spindle, SN:R346576, unused in opened original packaging, 100% functional, scope of delivery as per photos Crjdpfx Aoi Eaafjm Ujc

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey, Price upon request. The price applies ex warehouse 33106 Paderborn! Quantity discounts are possible for the purchase of multiple containers. Crsdozbtm Sepfx Am Usc Europe-wide delivery possible by arrangement. *Leasing/hire purchase possible.* 2 units, 6000 mm, available directly in stock, RAL 7043 6 units, 6000 mm, available in the short term, RAL colors of your choice 2 units, 6500 mm, available directly in stock, RAL 7043 2 units, 6500 mm, available in the short term, RAL colors of your choice 7000 mm available in approximately 4 - 6 weeks, RAL color of your choice Other versions and sizes available from the Paderborn warehouse. You can view our stock levels on our website. Roll-off container platform according to DIN Technical description: * Dimensions 6000 mm: 6000 x 2550 mm internal dimensions * Dimensions 6500 mm: 6500 x 2550 mm internal dimensions * Unladen weight 6000 mm: 1,720 kg * Unladen weight 6500 mm: 1807 kg * Longitudinal beams INP 180, spacing according to DIN 30722 * Tread plate floor 5 mm S 235 * Including 8 lashing eyes in the floor plate, load-bearing up to 2.5 tons * Front wall height 1500 mm * Hook Ø 50 mm S355 * According to DIN 30722, including testing according to DGUV Rule 114-010 * Steel idler rollers 159 x 6.3 mm, length 300 mm * Zinc phosphate primer and painted with synthetic resin paint * Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. If you have any questions, please send us a message or call us.

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Crodowix Hhjpfx Am Uec Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, *

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Crodpfx Aswix E Rsm Uec Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, accessories for both machines: 18 pallets, approx. 300pcs. toolholders, miscellaneous devices for workpiece-clamping... *

Condition: used, Year of construction: 2025, Overview This rotary counter-pressure filler and seamer was manufactured in 2025 by Italy Framax. The Cantastic 6000-EP is designed for filling and seaming of cans for beer, soft drinks, and alcoholic RTDs. It is currently still installed and can be visited on request. Technical data Capacity: approx. 70 cans/min (500 ml) approx. 100 cans/min (250 / 330 ml) Formats: 250 ml / 330 ml / 500 ml (standard, slim, sleek cans) Application: Filling and seaming of cans (beer, soft drinks, RTDs) Configuration: 10 filling valves / 2 seaming heads Filling system: Counter-pressure filling Filling pressure: approx. 0.15 – 0.4 MPa Filling temperature: approx. 1 – 4 °C CO₂ management: Pre-purging and undercover gassing, oxygen reduction system Seaming system: Lid size 202 (200 optional), manual lid feeding Control system: Siemens S7-1200 PLC with HMI touchscreen Drive system: Frequency inverter (Danfoss), unified drive Utilities: Power consumption: approx. 5 kW Compressed air: approx. 0.4 Nm³/h at ≥ 0.4 MPa CO₂ supply: ≥ 0.3 MPa Water consumption: approx. 0.2 m³/h Dimensions: approx. 3,153 × 1,980 × 2,350 mm Weight: approx. 5,500 kg Scope of Delivery Filler and seamer monoblock | Framax | Cantastic 6000-EP | Not provided | Rotary counter-pressure filler with integrated seamer Control system | Siemens | S7-1200 | PLC with touchscreen HMI Drive system | Danfoss | Frequency inverter Filling valve cores | 1 set Seaming rollers | 1 set (#1 and #2) Seaming chuck | 1 unit Can mouth seals | 10 units Filling valve seals | 10 sets Crjdpfx Amjzbhi Ie Usc

Condition: new, 400 x 32 mm capacity 90 degrees: round 145 mm capacity 90 degrees: square 130 x130 mm capacity 90 degrees: flat 300 x 80 mm capacity 45 degrees: round 105 mm capacity 45 degrees: square 115 x 115 mm capacity 45 degrees: flat 250 x 60 mm total power requirement 1,8 kW weight of the machine ca. 240 kg Csdpfxeyv Nhps Am Usrc dimensions of the machine ca. 800 x 1100 x 1400 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 15,000 h, punching force: 18 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, workpiece weight (max.): 230 kg, MACHINE DETAILS Format: Large format Beam operating hours: 15,000 hours Laser operating hours: 59,000 hours EQUIPMENT Sheetmaster Toolmaster Codpfx Aoza Urgem Ujrc Note: The machine will continue to be operational until 07/09/2026! The following data is taken from a manufacturer's data sheet. The seller cannot guarantee the accuracy of the data (the data sheet is attached to the listing): TECHNICAL DETAILS Travel range X-axis: 3,050 mm Travel range Y-axis: 1,550 mm Sheet thickness max.: 8 mm Punching force max.: 180 kN Workpiece weight max.: 230 kg

Condition: used, mileage: 57,800 km, power: 88 kW (119.65 HP), first registration: 09/2021, fuel type: diesel, overall weight: 2,835 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, soot filter, Special Equipment: Electronic parking assist, Handyman package, Full-size spare wheel (incl. spare wheel carrier) Cjdpeza Tbtofx Am Uorc Additional Equipment: Passenger airbag (deactivatable), Driver airbag, Audio system: Radio with Bluetooth/audio interface MP3 + DAB, Electrically adjustable and heated exterior mirrors, Brake assist, Electronic Stability Control (ESC) with Hill Holder and Traction Plus, Electric front windows with one-touch function, Rear wing doors without windows, Interior Package 3, Body/Configuration: Standard panel van, Partition wall to the cargo area, Engine: 2.0L – 88 kW turbo diesel Ecojet, Optics Package 3 / Professional Design, Wheelbase 3,098 mm, Full wheel covers, Tire repair kit, Low emissions according to Euro 6d-TEMP standard, Sliding door to cargo/passenger compartment on right, Cabin seats: double passenger seat with storage/compartment (Mobile Office), Cabin seats: driver comfort seat, Steel rims 6x16, Engine start/stop system, Socket in cargo/passenger compartment, LED daytime running lights, Plastic trim in cargo/passenger compartment The vehicle is in good condition, 2 keys Financing available through Santander Bank

Condition: good (used), functionality: fully functional, Year of construction: 2002, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Quick-change device for cutting head - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extractor Codpsza Eyhefx Am Uorc - Tank heater - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled digital, maintenance-free three-phase drives - Automatic re-positioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing tables, each 500 x 500 mm - Sensors for both indexing tables - Punch slug extraction - Forming capability - Programmable punch tool lubrication - Programmable pressure foot - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + Laser TLF 3200 + SortMaster Box incl. 4 containers + GripMaster, adjustable + Scissor lift table + Re-positioning cylinder + Rotoscanner + HZB SheetMaster + SortMaster Pallet + SheetMaster incl. C-frame + Modular suction plate + additional clamping jaws, total of 4 + Chip conveyor with tilting container + Bulging detection

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts Crsdpsza Eu Esfx Am Uec + Chip conveyor with tilting container

Condition: good (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 820 mm turning length 6000 mm control Siemens Si 840 D sl total power requirement 155 kW weight of the machine ca. 65 t dimensions of the machine ca. 16350 x 3700 x 3850 m Additional information Purchase price EUR 1.550.000 Time recording from Feb. 2025 Operating hours = 38601 h Main spindle = 1958 h Milling spindle = 1760 h CNC control Si 840D sl Working area 6000 mm Working height 1390 mm Swing diameter over bed slide/bed 820 mm X-axis travel +850 -25 mm Z-axis travel 6820 mm C-axis, smallest increment +/-0.001° Workpiece spindle Spindle head according to DIN 55026 A15 Bathing through 160 mm Codpezaz Egofx Am Usrc Front diameter Bearing 240mm 2-stage gearbox, infinitely variable programmable Drive power at 100/60% duty cycle: 78/87kW Speed ranges: 2 Speed range I: 10-501 rpm Speed range II: 10-1750 rpm Torque I, 60% duty cycle: 8000 Nm Torque II, 60% duty cycle: 2308 Nm C-axis Holding torque with backlash-free spindle brake: 3000 Nm Speed: 0-50 rpm Maximum torque (100/60% duty cycle): 3700/4430 Nm Steady rest clamping range: 70-425 mm Turning, drilling, milling head Front diameter: Bearing 110mm Interface HSK100/C8 Tool magazine Storage locations: 2 magazines, Baluff chip system Max. tool diameter (each position/every 2nd position) 125/200mm Max. tool length 600mm Tool weight 25kg Tailstock Quick diameter 180mm Stroke 170mm Internal taper MK6 Axially force, manually adjustable 5-30 kN Quick tip height adjustment +/-0.15mm Other: Collision monitoring sensor ACS 3-ARTIS Chip conveyor system Coolant system 980l tank and more

Condition: ready for operation (used), Lenze / Schneider Electric SX-1/21/0/2/8 m LED L1 card 51130049 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Crjdpfx Amjpf Aq Tj Uec