Used Barford Sx 6000 for sale (2,380)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 700 mm, table width: 6,000 mm, OPTIMIZING AND DEFECTING CROSS-CUTTING LINE CURSAL MOD. TRV 2000E 700 SX Line configuration: - Motorized roller conveyor 6000 x 760 mm - Chain feeder with singulator (buffer magazine) for boards from 4500 mm up to 6000 mm, capacity 6 boards - Optimizing and defecting cross-cutting saw Cursal mod. TRV 2000 E 700 SX - Roller feed system - Blade diameter 700 mm - Max feed speed 150 m/min - Cutting section 480 x 65 mm - Cutting section 530 x 30 mm - With chalk defect marking system Isdpeywdx Sjfx Abusar - Year 2015 - Outfeed conveyor belt 5000 x 600 mm - Bilateral overhead ejector - N. 2 transfer conveyors for semi-finished parts (1 right + 1 left) - N. 2 accumulation roller conveyors (1 right + 1 left)

Condition: good (used), Year of construction: 2004, functionality: fully functional, power: 4 kW (5.44 HP), We offer you: Compressor with boiler and refrigeration dryer Manufacturer: Kaeser Type: SX 6 / TA 11 Year of manufacture: 2004 / 1997 Subject to changes and errors in the technical data and information as well as prior sale! Iasdpfxovygf Ij Abuor Location: Berlin

Condition: new, Year of construction: 2026, Kilia Kutter Vacuum 30 6000 Vario Knife speeds Mixing/Cutting (RPM): 500 to 5100, variable Knife speed (m/s): 80 Stepless knife drive Stepless bowl drive Vacuum lid hydraulic Time/rounds cut-off Temperature cut-off Central lubrication Remote control Bowl volume L/kg: 30 L / 21 kg Bowl rotations RPM: 7 to 20, variable Ijdpjyv Uwcefx Abuear Touch and manual control Electric knife cover drive: optional Cooking/cooling device: optional Recipe manager KPV: optional Customer-side pre-fuse: 25 A gG/C Rated connected load: 15 kW

Condition: used, Year of construction: 2017, working width 6 m Number of gangs 5 0 Number of folders 2 0 Number of rollers 2 St. Iedpfx Aeyv Iwcobusar

Condition: new, functionality: fully functional, Year of construction: 2026, degree of automation: automatic, actuation type: electric, controller manufacturer: SUDA, controller model: Raytools, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus 6000W, laser wavelength: 1,064 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 16 mm, sheet thickness aluminum (max.): 14 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, input voltage: 400 V, type of input current: three-phase, type of cooling: water, total length: 8,450 mm, total width: 2,950 mm, total height: 2,320 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, FIBER LASER CUTTING MACHINE MTP F-6000 – 6000W High-performance fiber laser cutting machine designed for precise sheet metal processing. The MTP F-6000 combines a robust machine structure with high-quality components, ensuring excellent cutting quality, high working speed, and long service life. The machine is equipped with a 6000W laser source, an auto-focus cutting head, and a CNC control system. It is ideal for production plants, metal processing companies, and industrial workshops. The heat-treated frame structure ensures resistance to deformation and long-term precision. Key features: 6000W laser source Auto-focus cutting head CNC control system Linear guides Iajdpfoyv Dx Ajx Abusr Helical rack drive Rigid machine construction Automatic lubrication system Water cooling system Protective enclosure Advantages: High efficiency and cutting speed Excellent edge quality Low operating costs Easy operation Reliable continuous operation Applications: Steel structures production Sheet metal processing Automotive industry HVAC and ventilation Production of enclosures and metal parts Technical data: Model: MTP F-6000 Working area: 3000 × 1500 mm Laser power: 6000 W Cutting head: Auto Focus Control system: CNC Drive: Servo drives Guides: Linear Transmission: Helical rack Cooling: Water cooling system Lubrication: Automatic Construction: Welded, heat-treated frame Cutting capacity (6000W): Mild steel: up to approx. 25 mm Stainless steel: up to approx. 16 mm Aluminium: up to approx. 14 mm Standard equipment: 6000W laser source Auto-focus cutting head CNC control system Chiller Extraction system Working table Protective enclosure Optional equipment: Air compressor Dust extraction system Exchange table

Condition: excellent (used), load capacity: 6,000 kg, table load: 6,000 kg, Welding turntable with 6 ton load capacity Speed steplessly adjustable from approx. 0.01 to 1.1 rpm Ijdowz Rfyspfx Abujar Diameter 2.15 m New electrics With hand and foot remote control

Condition: ready for operation (used), - USED - CONVENTIONAL LATHE WITH DIGITAL READOUT SYSTEM CENTRE HEIGHT: 500 mm DISTANCE BETWEEN CENTRES: 6000 mm MAX TURNING DIAMETER OVER BED: 1000 mm MAX TURNING DIAMETER OVER CARRIAGE: 310 mm BAR CAPACITY: 150 mm Iodpfxoyry Spo Abusar ACCESSORIES: RAPID FEEDS OVER CARRIAGE ; STEADY REST ; PLATEAU

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, CNC travelling column milling machine | Manufacturer: ANAYAK | Type: HVM-6000-P | Year of construction: 2007 The machine can be inspected under power by appointment. Condition: Fully functional / ready for operation. Operating hours (as of 02.03.2026): - Control system on: 129.206 h - Machine on: 88.579 h - Programme run: 31.645 h - Spindle running time: 26.813 h TECHNICAL DATA Travel distances: - X-axis (longitudinal): 5.300 mm - Y-axis (transverse): 1.500 mm - Z-axis (vertical): 2.500 mm Table: - Table surface: 6.000 x 1.200 mm - Max. table load: 15.000 kg/m² Spindle taper: - Tool holder: ISO 50 Milling head – multi-angle, 45° (degrees): - Angle positioning: Automatic axes B and A - Speed with continuous change: 60 – 4.000 rpm Feeds: - Working feed: 10.000 mm/min - Rapid feed: 20.000 mm/min EQUIPMENT: - 2 x CNC control: HEIDENHAIN iTNC 530 - Tool changer, chain magazine 100 positions - 2 x Electronic Hand Wheel - 2 x Chip conveyors - External and internal coolant supply through the spindle - CE marking - Documentation Iedpfjyry Rfsx Abuear No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale – Detailed technical data sheet and information on equipment available on request.

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 6,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, controller manufacturer: SIEMENS, controller model: n/a, number of axes: 4, This 3-axis CHIRON Mill 6000 SK was manufactured in 2004, featuring a high-speed motor spindle at 12,000 rpm and a travel range of X 6,000 mm, Y 630 mm, Z 550 mm. It includes a 5-axis milling package, 92 tool positions, and a Marposs collision monitoring system. Ideal for long part machining up to 6,000 mm and pendulum machining. If you are looking to get high-quality milling capabilities consider the CHIRON Mill 6000 SK machine we have for sale. Contact us for more information. Iedex Nr Irjpfx Abuear Machine Benefits Technical Machine Benefits • 92 tool positions hsk-a63 (background magazine) • Long part machining up to a maximum of 6000 mm • Machining of the end face (5th side) horizontally with swivel head (right/left) • Pendulum machining via center partition, max. Workpiece length 1773 mm with sk machining on both end faces (tool length 120 mm) • 4 hydraulic double vices (fixed center jaw) per pendulum section, positioning, and clamping via linear system (hydraulic release, mechanical clamping) Extra Information Additional Equipment High-speed package with Motor Spindle: 12000 rpm, 140 Nm Production Package: Scraper belt conveyor, discharge height 1050 mm Internal coolant preparation KNOLL VRF250 vacuum rotary filter (suitable for steel, cast iron, aluminum, plastic, brass) High pressure 70 bar with HP pump and variable valve Flushing gun per pendulum field Emulsion mist extraction, 2 fans each 800 m²/h Rotating viewing window left and right (1400 mm from machine center) Automatic loading doors Center partition for pendulum machining 5-Axis Milling Package Air Blast Tool Life Monitoring Additional V24 RS232 in the control cabinet BDE/MDE interface (statuses: machine on, machine running, part counter) Marposs (Brankamp) CMS100 Collision Monitoring System 3D machine model for kinematic simulation in the CAM programming system 210 bar hydraulic power unit, 2 clamping circuits, separate system clamping pressure for each pendulum field, clamping pressure control KOHN linear clamping system 8 KOHN Multi 2000 MFS 125/680 HD hydraulic vices Two-part operator step across the entire operating width of 6000 mm With the 3 axes x, y, z and the swivel head, the software package 5-axis milling can be used to mill shapes, e.g. a curve. The software then synchronizes the axes.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: MAZATROL, controller model: 640M Nexus, number of axes: 4, This 4-axis Mazak NEXUS HCN 6000 was manufactured in 2006. It features a Mazatrol 640M Nexus control, 800 mm travel in X, Y, and Z axes, and a B-axis rotation of 360°. The spindle speed reaches up to 10,000 rpm, and it includes a 120-position tool magazine. The table can handle loads up to 1,000 Kg. Consider the opportunity to buy this Mazak NEXUS HCN 6000 turn-mill centre. Contact us for more information. • B-axis rotation: 360° • Table size: 500 x 500 mm • Permissible load: 1,000 kg • Tool magazine: 120 positions • High pressure coolant: 70 bar Additional equipment • Chip evacuator (chip conveyor) Technical Specification Taper Size ISO 50 Iaedoygl Ncspfx Abuer

Condition: ready for operation (used), functionality: fully functional, Graphic Whizard numbering, perforating and creasing machine with many accessories. Immediately available Iaodovcxwnopfx Abujr

Condition: excellent (used), RMS Type: SW 3509 + TGD 6000-000.00 amplifier and fan RMS Electrodynamic Vibration Test System Technical data: Sine: 7.5 kN Random: 6.7 kN Shock: 13 kN Displacement pk-pk: 25.4 mm Velocity: Sine 1.5 m/s Random 2.5 m/s Shock 2.5 m/s Acceleration: 100 g Cooling: Air-cooled Isdpfshylymex Abuoar Total weight approx. 4000 kg Condition: used Scope of delivery: (see image) (Changes and errors in technical specifications reserved!) We are happy to answer further questions by phone.

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 2455548, power: 23.1 kW (31.41 HP), load capacity: 500 kg, lifting height: 16,000 mm, platform length: 4,000 mm, platform width: 1,890 mm, overall weight: 7,240 kg, transport length: 4,180 mm, transport width: 2,250 mm, transport height: 2,990 mm, fuel type: diesel, tire size: 10n x 16,5, color: yellow, Equipment: all wheel drive, Technical data Year of manufacture: 2019 Engine: Diesel, 23.1 kW Iaedpfjyqzr Ijx Abusr Working height: 18.00 m Platform height: 16.00 m Load capacity: 500 kg Platform extension: 1.00 m Platform dimensions (L x W): 4.00 x 1.89 m Overall dimensions (L x W x H): 4.18 x 2.25 x 2.99 m Drive speed: 1.6 - 6 km/h Max. climbing ability: 45° Total weight: 7,240 kg Fully functional, general signs of use

Condition: good (used), Year of construction: 2001, Injection Molding Machine NETSTAL S 6000-5500E Basic Information Manufacturer: Netstal Model: S 6000-5500E Year of Manufacture: 2001 Operating hours: 88,933 h Clamping Unit Clamping force: 6,000 kN Mounting plate dimensions (H × W): 1,620 × 1,550 mm Tie-bar spacing (H × W): 1,020 × 1,020 mm Minimum mold height: 500 mm Maximum mold height: 1,000 mm Maximum mold opening: 1,950 mm Centering ring diameter: 160 mm Maximum ejector stroke: 280 mm Injection Unit Screw diameter: 90 mm L/D ratio: 27 Injection volume: 2,290 cm³ Shot weight (PS): 2,196 g Maximum injection pressure: 2,410 bar Maximum injection speed: 4,453 cm³/s Machine Dimensions and Weight Clamping unit dimensions: 7.21 × 2.40 × 2.50 m Injection unit dimensions: 4.60 × 2.61 × 2.50 m Total machine weight: 62,000 kg (62 t) Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system that enhances the energy efficiency of hydraulic injection molding machines. The system controls the operation of the hydraulic pump motor using a frequency inverter, which adjusts the motor speed to the actual requirements of the production cycle. As a result, electrical energy is only consumed when the machine actually requires it. Benefits of the ESS System - Up to 30% reduction in electricity consumption - Servo drive technology for the hydraulic pump - World-class and proven technology used in the plastics processing industry - Reduced energy losses during idle operation Iajdpfeyugcgex Abujr - Lower heating of the hydraulic system - Extended service life of hydraulic components - Can be retrofitted to existing hydraulic injection molding machines The ESS system allows for significant reduction of machine operating costs while maintaining full production parameters.

Condition: good (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: D1101C3066, laser type: CO₂ laser, laser power: 6,000 W, total length: 1,145 mm, total width: 1,035 mm, total height: 620 mm, Equipment: CE marking, TruFlow 6000 laser resonator by Trumpf for sale. The resonator is in good used condition and operates flawlessly. Two identical units are available (price is per unit). Iajdpjyt Dchofx Abusr

Year of construction: 2014, condition: ready for operation (used), A CNC large-format rigid-bed milling and boring center Soraluce is available. Travel X/Y/Z: 4500mm/1600mm/1300mm, table dimensions X/Y: 6000mm/1100mm, max. table load: 5000kg/m², spindle bearing diameter: 90mm, tool holder: ISO 50, speed: 5000rpm, power: 43kW/32kW, rapid traverse: 35m/min, feed force: 16kN, coolant volume: 350l, delivery pressure: 5bar, tool positions: 40. Machine dimensions X/Y/Z: approx. 8700mm/5000mm/3850mm, weight: approx. 22000kg, control: Heidenhain. Including IKZ, chip conveyor, probe, tool probe and cooling unit. Documentation available. An on-site inspection is possible. Iajdsytgpkopfx Abusr

Condition: like new (used), Year of construction: 2022, operating hours: 550 h, functionality: fully functional, machine/vehicle number: siehe Bildmaterial, total length: 4,500 mm, total height: 1,400 mm, total width: 1,550 mm, type of input current: three-phase, product height (max.): 200 mm, product height (min.): 50 mm, product length (min.): 400 mm, product length (max.): 600 mm, product width (max.): 400 mm, product width (min.): 250 mm, input voltage: 400 V, working height: 800 mm, We are offering this as-new Smipack / Saropack production line consisting of the GHS1000/400, WS 6000 CS, and T450 (conveyor belt/sealing station/heat shrink tunnel), with all components manufactured in 2022. Last maintenance was carried out in 09/2025. Shrink Wrapper WS 6000 CS Phase Connection: 3 + N + PE Voltage: 380–415 V Frequency: 50–60 Hz Power Consumption: 3350 W Current: 14.5 A Conveyor Belt GHS 1000/400 Phase Connection: 1 + N + PE Voltage: 220–240 V Frequency: 50–60 Hz Power Consumption: 370 W Current: 1.8 A Shrink Tunnel T450 Phase Connection: 3 + N + PE Voltage: 380–415 V Frequency: 50–60 Hz Power Consumption: 8000 W Current: 11.5 A Iasdoytcc Hjpfx Abusr If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, The equipment in question is a Horizon AC 6000, a sophisticated machine designed for efficient paper handling and stacking. Manufactured by Horizon, this model has a serial number of 26027 and dimensions of 318 x 470 mm. It is currently in stock and located in Germany. The AC 6000 features six pockets with suction feed, making it highly capable of handling multiple stacks simultaneously. It includes a Criss-Cross Stacker, which enhances its versatility in organizing paper outputs. The machine can manage a maximum paper size of 318 x 470 mm and a minimum size of 148 x 210 mm, accommodating a wide range of paper dimensions. With a maximum operational speed of 2,400 sheets per hour, this machine is built for high productivity. The overall dimensions of the unit are 1,650 x 650 x 1,650 mm, making it a substantial yet efficient addition to any production line focused on paper handling and stacking tasks. Format: 318 x 470 mm Equipment: 6 pockets, suction feed Criss-Cross Stacker and Iaodpfx Aswxm Rgebusr Max size: 318x470mm min. size: 148x210 Max speed: 2400 h Dimensions: 1650x650x1650

Condition: used, Year of construction: 2012, operating hours: 10,000 h, machine/vehicle number: M319, Used SIG filling monoblock 6000 BPH - year 2012Technical Specifications & Performance DataThis automatic filling and capping monoblock is engineered for reliable, mid-range output in beverage production and industrial packaging environments for fresh milk. Manufactured by SIG in 2012, it combines filling and capping on a single compact frame to reduce footprint and streamline changeovers. Designed for second hand installations and upgrades of a used bottling line, it offers dependable performance with standardized utilities and CE conformity.Manufacturer: SIGModel: GTN-00Year: 2012Production speed: 6000 bphBottle formats: Compatible with 0.5L to 1.0L bottlesContainers: Designed for PET and Glass bottle handlingOperating hours: 10000+Electrical supply: 380 V, 3-phase, 50 HzFull load current: 120 ALargest motor load current: 5.4 AShort-circuit interrupting capacity: 5000 AConstruction: CE-marked packaging machineryAdvanced Automation & Control SystemsThe monoblock is configured for automated operation with centralized machine controls, ensuring stable production at 6000 bottles per hour. Electrical architecture is standardized for 380 V, 50 Hz, three-phase networks, supporting safe integration into existing bottling equipment. CE conformity underpins safety circuits and compliant machine wiring, while the integrated design simplifies synchronization between the filler and capper to minimize downtimes during format changes.Production Line Integration CapabilitiesThis unit is well-suited for integration within a used bottling line or as a standalone monoblock in beverage production. Its adjustable working range supports bottle formats from 0.5L to 1.0L, with compatibility for PET and glass bottles, making it adaptable for diverse industrial packaging requirements. Conveyors and upstream/downstream modules can be synchronized to line speed, supporting efficient infeed and discharge configurations.Machine Condition & Maintenance HistoryThe machine is second hand with 10000+ operating hours and configured for ready-for-operation deployment, subject to standard installation and commissioning procedures. Its CE-marked construction and preserved utility specifications indicate a well-documented industrial asset suitable for continued service within beverage production environments.Operational Performance & VersatilityCombining filling and capping on one frame, the monoblock eliminates inter-machine transfer points and reduces footprint. The 6000 bph throughput is ideal for medium-scale operations, contract packaging, and line expansions. Flexibility across PET and glass bottles within 0.5L to 1.0L allows rapid response to product mix changes in bottling equipment portfolios. The integrated capping system ensures precise torque application aligned to the selected closure format when appropriately tooled.Installation Requirements & Site PreparationThe machine requires a 380 V, 50 Hz, three-phase electrical supply... Iaedpfx Aeymdqfsbuor

Condition: used, Year of construction: 2013, x-travel 6000 mm y-travel 4750 mm z-travel 1500 mm control Siemens 840 D SL Table Verschiebetisch table load max. 20 t Tool changer 120 pos. tool taper SK 50 size of pallet 2200x1500 mm spindle power 46 kW Iedpfx Aboyr Aq Uousar Aggregate (pick-up max. 5 positions): Ortho head 1x1 degree Short vertical milling attachment Heavy angle head Long angle head The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), mileage: 71,000 km, power: 70 kW (95.17 HP), first registration: 02/2021, fuel type: diesel, fuel: diesel, color: silver, gearing type: mechanical, number of gears: 5, emission class: euro6, number of seats: 3, Year of construction: 2021, Number of doors: 5 Number of cylinders: 4 Engine displacement: 1,300 cc Technical condition: very good Isdpow R Urnefx Abuoar Optical condition: good Damages: none Warranty: none

Condition: excellent (used), mileage: 39,500 km, power: 77 kW (104.69 HP), fuel type: diesel, fuel: diesel, color: silver, gearing type: mechanical, number of gears: 5, emission class: euro6, number of seats: 3, Year of construction: 2022, Number of doors: 5 Cab: single Number of cylinders: 4 Engine displacement: 1,600 cc Technical condition: very good Visual condition: very good Iasdpfsw R Uucox Abuer Damages: none Warranty: none

Condition: good (used), functionality: fully functional, Year of construction: 2013, laser power: 2,700 W, X working area max.: 2500 mm Y working area max.: 1250 mm Control system: Rexroth IndraMotion MTX (basic version) Laser power: 2700 Watt Standard Equipment Machine - Sturdy, easily accessible C-frame - Coordinate guide system for high-precision machining - Linear magazine with 23 tool stations and 2 clamps - Maintenance-free three-phase drive motors - Repositioning unit with programmable hold-down device - Foot pedal for clamp closing - Alignment pin (right inside) - Ball tables - 2 parts flaps 500 x 500 mm incl. sensor for parts ejection - Two good parts containers - NitroLine - Focus Line - FastLine - FlyLine - Slag cone detection - Ejector cylinder for laser parts TRUMPF Laser - TruFlow 2000 laser with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control - Enclosed beam guidance - Fine filtration of compressed air for beam tube ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change system UTI with bus connection - ControlLine Punching Station Isdpfx Aeylk U Iobuear - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down device with manually adjustable holding force - Stroke counter for punch and thread-forming - Punch spray lubrication - Punch slug extraction - Measurement of fill level in punching console - Level monitoring for thread-forming and tool lubrication Control - TRUMPF control based on Rexroth IndraMotion MTX - Operating panel with 17" touch screen - Integrated technology data - Teleservice via internet - Programmable cutting gas pressure - Automatic shutdown incl. wake-up mode - Program management - Production scheduling Data Transfer - Network connection RJ45 and USB interface Safety - CE marking - Two-beam light curtain - Monitoring system for gas pressure, temperature, and cooling water - Emergency stop - Protection against stray radiation - Compact extraction unit + Brush tables + Lowerable die + MultiTool function + Softpunch function + Marking function + Chip conveyor with tilting container + Roll technology functions: roll knurling, roll deburring, roll shearing, roll offsetting, roll bead forming, roll cutting + Die spray lubrication + Blow-off device for small parts + 1 pc. additional clamp + Smart Punch Monitoring (punch breakage monitoring) + Vibration-damped installation + Repositioning cylinder + Warping detection + Parts conveyor belt in punching area + Parts conveyor belt in laser area + GripMaster (2500x1250) + Scissor lift table + Scrap grid pallet + SheetMaster (2500x1250) (AK04) + Peeling system + Automatic clamp closing + HZP loading/unloading + TwinCarts loading station with toothed belt drive + TwinCarts unloading station with toothed belt drive

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) Iajdpfjylk D Nex Abujr - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: good (used), Year of construction: 2015, mast type: telescopic, fuel type: diesel, Weights Empty weight: 25.139 kg Functional Lifting capacity: 340 kg Working height: 5.670 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 2520 m Iaedpfxex Uzi Nj Abujr Max swing of platform in degrees: 360 Transport dimensions (LxWxH): 16,28x4,98x3,09 Additional information Please contact Christian Theißen for more information Manufacturer: Genie Model: SX180 Year of build: 2015 Condition: Used Data: Max. working height: 56,68 m Max. platform height: 54,68 m Max. reach: 25,22 m Drive type: Diesel Total dimensions LxWxH: 16,28 x 4,98 x 3,09 m Length of transport position: 13,20 m Height transport position: 3,09 m Track widening: 4,98 m Platform dimensions LxW: 2,44 x 0,92 m Max. basket load: 340 kg Swivel range: 360° Overhang: 1,19 m Movable up to working height: 54,68 m Ground clearance: 0,33 m Empty weight: 25.139 kg Special features: Rotating work basket 160°, basket arm, all-wheel drive.