Used Barford Sx 6000 for sale (3,331)

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, number of seats: 30, gearing type: automatic, emission class: euro6, color: white, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, New vehicle without registration, immediately available with automatic transmission! Also available: 5 x facelift models Hsdjx Tvayjpfx Afkofb The ideal school bus or small group tour bus for customers with a limited budget. Manufactured for Germany with double glazing, auxiliary heater, 24-month warranty 29 sleeper seats with folding tables ----General vehicle data: * Length: 7,168 mm * Width: 2,262 mm * Height: 3,352 mm * Wheelbase: 3,350 mm * Front/rear overhang: 1,613 mm / 2,205 mm * Turning circle diameter: 12,200 mm * Passenger capacity: 29 + 1 * Permissible total weight: 8,160 kg * Diesel tank capacity: 160 l * AdBlue tank: 12 l Drivetrain: * Type: E6 MFTBC 4P10-HAT4 (Mitsubishi) * 4-cylinder inline engine * Automatic transmission type: MFTBC M038S5 * Emission standard: Euro 6e * Displacement: 2,998 cm³ * Power: 110 kW / 150 HP at 3,500 rpm * Max. torque: 370 Nm at 1,320 rpm * Engine compartment fire suppression system Braking system and safety features: * Disc brakes * EBS (Electronic Braking System) * ESP (Electronic Stability Program) * ABS (Anti-lock Braking System) * ASR (Traction Control) * AEBS (Autonomous Emergency Braking System) * LDWS (Lane Departure Warning System) Climate control / Heating / Ventilation: * Safkar roof-mounted air conditioning * Side wall convector heaters * 1 roof hatch (manual operation) * Eberspächer auxiliary heater Doors: * Door 1: single-leaf front * Door 2: single-leaf rear * Pneumatic control Accessories: * Fire extinguisher 1 x 6 kg * First aid kit * Emergency hammer Our company has been established in the market for 35 years. You can inspect and test drive the vehicles at our location. You will be received at our business premises — not at some parking lot — and our company address is not just a mailbox in an apartment building. Those mailboxes tend to disappear after a few months.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 7,202 h, load capacity: 4,000 kg, lifting height: 6,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,800 mm, motor manufacturer: GM 3.0, fork length: 1,200 mm, overall weight: 6,100 kg, empty load weight: 4,000 kg, total height: 3,800 mm, total length: 2,300 mm, total width: 2,200 mm, maximum load weight: 4,000 kg, fuel: liquid petroleum gas (LPG), Equipment: adjustable boom, cabin, lighting, pallet forks, sideshift, Very good condition Combilift. Mast duplex 6000 mm with free lift Sideshift Hodpex Tt Rpsfx Afkjfb We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 230 bar, empty load weight: 67 kg, input voltage: 400 V, fuel: electricity, warranty duration: 6 months, KARCHER HD 10/23-4 SX COLD WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and an adjustable nozzle. The integrated hose reel makes it easy to roll up and store the hose. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 230 bar and 1000 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply: 3 phase - 400 V - 50 Hz Discharge capacity (l/h): 1000 Operating pressure (bar): 230 Maximum pressure (bar): 253 Connection power (kW): 7.8 Weight (kg): 67 Dimensions (L x W x H) (mm): 560 x 500 x 1090 Hose length (m): 20 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 20m steel braided pressure hose NEW adjustable nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dispensing cleaning fluid directly through the machine Highly legible and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Hsdpfsx Ttzuox Afkofb

Condition: used, mileage: 103,580 km, power: 70 kW (95.17 HP), first registration: 11/2020, fuel type: diesel, overall weight: 1,795 kg, color: white, gearing type: mechanical, Permissible total weight: 1795 kg Hjdpfexwzwvox Afkefb

Year of construction: 2007, operating hours: 2,000 h, condition: used, functionality: fully functional, cylinder diameter: 200 mm, pressure (max.): 6,000 bar, machine/vehicle number: 600/55, High-Pressure Food Processing Machine (HPP System) – Wave 6000/55 This high-pressure food pasteurization system (HPP) is a unit designed for batch processing of packaged food using hydrostatic pressure. The machine is fully operational, well maintained, and suitable for research, product development, and low-to-medium volume industrial production. High-pressure processing (HPP) offers significant advantages for food manufacturers seeking to improve product safety, quality, and shelf life without the use of heat or preservatives. By applying up to 600 MPa of hydrostatic pressure to already packaged products, HPP inactivates harmful pathogens such as Listeria monocytogenes, Salmonella, and E. coli while preserving the natural taste, texture, nutrients, and color of the food. This makes HPP an attractive technology for clean-label formulations. In addition, the process typically doubles or even triples the shelf life of many refrigerated foods, reducing waste and improving distribution flexibility. Because HPP is a post-packaging treatment, recontamination risks are minimized, enabling manufacturers to meet stringent food safety standards in domestic and export markets. The technology is suitable for a wide range of products, including meat, seafood, juices, plant-based foods, ready-to-eat meals, and high-value chilled items. The system offers a treatment chamber volume of 55 L, reaching pressures up to 6,000 bar (600 MPa), with automatic basket loading/unloading and an integrated intensifier. It is ideal for enhancing food safety, extending shelf life, and enabling clean-label product concepts. Technical Details Model: Wave 6000/55 Chamber layout: Horizontal Chamber dimensions: Ø 200 mm × 2,000 mm Chamber volume: 55 L Total equipment length: 8,020 mm Maximum working pressure: 6,000 bar (600 MPa) Pressure medium: Water, free of additives Processing water temperature: +5 °C to +30 °C Pressure-build time (0–6,000 bar): 3.9 min Intensifiers: 1 integrated Electrical power: 47 kW (50 Hz) Loading/unloading system: Automatic Total weight: ~20,000 kg Condition and Use Cases The machine is in very good condition and suitable for: Meat, seafood, ready-to-eat meals Dairy, beverages, plant-based products Shelf-life extension and pathogen reduction R&D, validation trials, pilot production Cycles completed (as of Jan 2025): 20,000 Included with the High Pressure Food Processor WAVE 6000/55: High-pressure vessel made of stainless steel, wire-wound with high-resistance cable; horizontal layout with 55 L useful volume Yoke constructed from high-quality steel layers, double-primed and painted Stainless steel vessel plugs Support beds Hydraulic power unit with vessel opening/closing mechanisms Integrated intensifier (1 unit) High-pressure stainless steel piping for intensifier–vessel connection Water filtration system (5 µm) Temperature probe for monitoring processing water via the client fluid circuit Tactile touch screen for automatic and manual operation (interface in German) Electrical control cabinet SCADA system for control and data recording Internet communication module for remote service Instruction manual Hjdpfx Afjx E Utiokjfb The machine has been used for reasearch purposes and has only done ~20.000 cycles. It is assumed the average cycle length is 6minutes = 2,000 hours All technical specifications and details are provided without guarantee. Subject to prior sale and possible errors or omissions.

Condition: good (used), Textile screen printing flash dryer Acosgraf Texflash SE 6000 6000W Hodpfovnrkfox Afkefb 400V 3 phases 6 x 1000W independent lamps for auto or manual machines automatic use with sensor very clean We ship everywhere in Europe (shipping cost to be added)

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 5,547 h, load capacity: 5,000 kg, lifting height: 6,000 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 210 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 28X12,5-15, overall weight: 12,200 kg, empty load weight: 7,200 kg, total height: 2,550 mm, total length: 2,500 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, fork extension, lighting, pallet forks, retractable fork, sideshift, USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🔧 🕓 Years of experience | 🧰 Own service & paint shop | 🚛 Own transport | 🤝 After-sales support Looking for a forklift you can trust? We are a reliable European dealer of new & used forklifts. Our machines undergo full inspection, service and are ready to work. FT Logistics stands for quality, precision & reliability. 🌟 Why choose us: ✅ Full technical service (inspection, filters, oils, key components) ✅ Optional UDT certification ✅ In-house paint & repair workshop ✅ Transport across Europe by our trained drivers ✅ Operator training & testing upon delivery ✅ After-sales support and spare parts ✅ Financing options | Invoice in EUR or PLN 🚜 OFFER: COMBILIFT C5000XL – Four-way / Multi-directional Forklift 📅 Year: 2018 ⏱ Hours: 5,547 ⚙️ Drive: GAS 🏋️ Capacity: 5,000 kg 📏 Mast: Triplex 6,000 mm 🔩 Fork positioner: 1,350 mm Extendable forks: 1,200–2,000 mm 🛞 Tyres: Superelastic 100% 📈 Free lift: 2,000 mm 💯 Condition: Excellent – after major service 🧼 Appearance: Clean, rust-free, ready to work Hfodpjx Td Irofx Afksb 📐 Dimensions: H 2,550 mm | L 2,500 mm | W 2,250 mm | P-width 1,350 mm | Overall 2,900 mm Perfect for: Warehouses with narrow aisles | Wood, steel & tube industry | Long load handling | Indoor & outdoor work FT Logistics – Quality you can rely on. Service you can trust. 💼

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,400 mm, total length: 3,500 mm, total height: 2,350 mm, air demand: 200 m³/h, Cartridge filter system MBX-6000 with 8 cartridges. Suitable for filtering all types of dust, e.g., wood, sand, etc. Effective air capacity 6000 m³/h, electric motor 9 kW, 3x400 Volt, 50 Hz, filter surface area: 104 m² (8x13 m²), filter class: M according to DIN 60335, pneumatic filter cleaning, 10-minute run-on, dust containers: 4 units of 30 liters each. Hfedpox Ai Hpsfx Afkjb

Condition: good (used), Year of construction: 1972, Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table -Manufacturer: Platten, scissor lift table type 6.0 T/F/A -Load capacity: 6000 kg Hfodpfx Afen Hbbuekjb -Platform: approx. 1740 x 1280 mm -Dimension when retracted: Height 975 mm -Extended dimension: Height 1390 mm -Hydraulic unit: Kunz/Elmot 1.5 kW / 180 bar -Transport dimensions: 1740/1280/H1985 mm -Empty weight: 1270 kg

Condition: excellent (used), Year of construction: 2011, Year: 2011 (Commissioned in 2015) Table - Size range: 630mm - Positioning of the sub-table: 1 ° - Positioning of the turntable: 0.001 ° - Height of pallet: 1200mm Travel - X-axis: 1000mm - Y-axis: 800mm - Z axis: 850mm - Distance between spindle center and table top: 200mm - 1050mm - Distance between spindle center and top of range: 100mm - 900mm feed - Rapid (same for X-, Y-and Z-axis): 60m/min - Cutting feed (equal to X, Y & Z axis): 0,001 - 30m/min spindle - Spindle speed: - min 14,000 rpm / 35 ATC (Automatic tool changer) - Number of tools: 60Stk. - Tool change time (tool to tool): 2.4 s Hfedjnmx Tpspfx Afkeb - Tools used: SK 50 / debit pin BT Capacities - Operating Oil: 53l - Slide lube oil / lube spindle head: 3,0 l - Coolant for spindle & ball screw head: 37l Services - Positioning (X, Y, and Z-axes): + - 0.003 mm - Repeatability (X, Y, and Z-axes): + - 0.0015 mm!! - Payload Pallet: 800kg - Axial: 14700N

Condition: used, Year of construction: 1999, total height: 2,270 mm, total width: 2,250 mm, total length: 1,900 mm, Empty weight: 1.400 kg Hodpfxjx Tcqxe Afksfb Current frequency: 50 Hz Voltage: 400

Condition: good (used), Year of construction: 2004, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 3,600 mm, Travels: X-axis (lengthwise): 6.000 mm Y-axis (cross): 1.500 mm Z-axis (vertical): 3.600 mm W-axis (Table): 2.000 mm Spindle speeds in 2 steps: 20 up to 4.000 rpm Torque: 1.410 Nm Clamping force: 20.000 N Feed rates X/Y/Z: 2 up to 12.000 mm/min Rapid traverse X-/Y- and Z-axis: 20.000/15.000/25.000 mm/min Drive of the milling spindle at 100% ED: 37 kW EQUIPMENT: CNC-controlled hydrostatic rotary and sliding table, Brand: RÜCKLE, Type: PKTF 8, Year of construction: 1996 -Clamping surface: 2.980 x 3.500 mm -V-axis: 2.000 mm -Table load approx.: 30 tons 120-position tool changer -Tool diameter max.: 125 mm – with free adjacent seats: 250 mm -Tool length max.: 400 mm -Tool weight max.: 30 kg Tool holder (DIN 69871 Form AD): ISO 50 Mobile operator platform Electronic hand wheel HR 420 Chip conveyor Hfsdpjtw Tx Tefx Afkeb 3D thermal expansion compensation Z-axis with level control Tapping without compensating chuck (ratio 1:1) Touch probe system M&H 20.00 wireless Full protection cabin + movable chip protection wall for the rotary table (Setup side/working side) 4-fold milling head changer / Pick-up station 1 piece of Universal milling head , 1° x 2,5° (indexing in the CNC programme) 360 Rear level positions / 144 Front level positions 1 piece of Horizontal milling attachment 1 piece of Universal milling head / Fabrikat: HENNINGER, Type: 880-40 – ISO 40 Internal and external cooling through the spindle Total connected load: 75 kVA Machine weight: 36,2 tons Space requirement (Length x Width x Height) including RÜCKLE table approx.: 12.435 x 8.420 x 5.085 mm

Condition: used, functionality: fully functional, machine/vehicle number: 8701, Year of construction: 1999, operating hours: 2,117 h, load capacity: 1,250 kg, lifting height: 4,360 mm, free lift: 1,700 mm, fuel type: electric, mast type: duplex, fork length: 1,250 mm, drive type: Elektro, High-lift order picker Chassis number: 8701 Load center: 600 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: normal Front tire type: Solid rubber Rear tire type: Solid rubber Hjdpfxox S Tcio Afkefb Battery voltage: 48V Battery type: PzS

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 7,202 h, load capacity: 4,000 kg, lifting height: 6,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,800 mm, motor manufacturer: GM 3.0, fork length: 1,200 mm, overall weight: 6,100 kg, empty load weight: 4,000 kg, total height: 3,800 mm, total length: 2,300 mm, total width: 2,200 mm, maximum load weight: 4,000 kg, fuel: liquid petroleum gas (LPG), Equipment: adjustable boom, cabin, lighting, pallet forks, sideshift, Very good condition Combilift. Mast duplex 6000 mm with free lift Sideshift Hfedpsx S R E Ijfx Afkob We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: excellent (used), Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: Conveyor belt, transport belt, unused -Width: 140 mm -Length: 6 m Hsdpfxjvu Td He Afkefb -Dimensions: Ø 240 x 145 mm -Weight: 3.2 kg

Year of construction: 2025, operating hours: 1 h, condition: new, functionality: fully functional, MONTHLY OFFER – only in April! The ZS 6000 automatic packaging machine is suitable for various vegetables such as potatoes, onions, carrots, cucumbers, beets, etc. It is used for automatic, electronic weighing, filling Raschel mesh bags, and sewing or sealing the bags. The harvested produce is metered from the bunker via a ribbed conveyor belt into the two electronic scales. The conveyor belt transports the harvested produce to the desired delivery point. Packaging units range from 1 to 25 kg. Available in two versions: powder-coated or stainless steel Technical specifications: Capacity: approx. 6 t/h Type / hour 5 kg – 1,690 kg 10 kg – 2,600 kg 15 kg – 3,700 kg 20 kg – 6,120 kg Power rating: 6 kW, 400 V Hodowax U Hspfx Afksfb Packaging range: 1–25 kg (manual up to 50 kg) Packaging type: Raschel net Sewing machine: New Long NP-07 single-needle sewing machine Control system: 7" touchscreen Label dispenser Conveyor belt with vibration motor Dosing system with vibration system Suitable for crops: Potatoes, onions, cucumbers, carrots Dimensions: Length: 1,940 mm Width: 4,300 mm Height: 2,230 mm Weight: approx. 950 kg

Condition: used, Year of construction: 2009, operating hours: 3,312 h, 2009 | Haulotte H15 SX (15m) | Used Scissor Lift | 3312 hours 📍Location: France, Illange 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 9600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 41 inspection points 35 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Left front stabilizer works after bypassing needs to be repaired , only steers right , broken steering button , engine has underpressure 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39711 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals Hfjdpox Rpdtjfx Afksb ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: reconditioned (used), Year of construction: 2011, Wohlenberg Perfect Binder City e 6000 year 2011 - 15 clamps - handfeeding - infeed channel with jogging station - 2 spine preparing units - Hotmelt spine gluing unit with integrated premelter - Hotmelt side gluing unit with integrated premelter - PUR spine gluing unit with integrated barrel melting system - PUR / Hotmelt heating and cleaning station - foredge trimming device VSS for production of gatefolded brochures in in one operation - rotary cover feeder Hfjdpfx Afot U Ahqskjb - scoring unit 2 and 4 scores - 2 pressing stations - small size equipment (min.  140 x 75 x   2 mm) - delivery channel - laydown device

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: Hjdpfx Afjx Suzaskefb * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, total length: 8,500 mm, total width: 2,130 mm, total height: 1,550 mm, rotational speed (max.): 630 rpm, rotational speed (min.): 5 rpm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-135B2/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical data: - distance between centers/turning length: 6000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - power drive on upper compound slide - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power: 27/41 kW (1st gear / 2nd gear) - overall dimensions: total length: 8500 mm width: 2130 mm height: 1550 mm total weight: 14100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Hodjkyt Hlopfx Afkofb Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: good (used), Year of construction: 2010, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor -Manufacturer: Transnorm, belt conveyor type 1100 -Speed: frequency-controlled, up to 83.5 m/min -Drive: SEW-Eurodrive 1.1/0.11 kW, see photo of nameplate -Belt width: 600 mm -Conveyor length: approx. 6000 mm -Installation dimensions: 6000/940/H340 mm -Transport dimensions: 4200/940/H490 mm Hfjdsihi T Tspfx Afkjb -Total weight: 269 kg

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 2,130 mm, total height: 1,550 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 5 rpm, overall weight: 14,100 kg, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B1/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 6000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 8,000 kg - maximum workpiece weight between centers + 1 steady: 10,000 kg - maximum workpiece weight between centers + 2 steadies: 11,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power: 27/41 kW - overall dimensions: total length: 8500 mm width: 2130 mm height: 1550 mm total weight: 14100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers Hjdpfx Ajfhk Injfkjfb - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: good (used), Servo motor, electric motor, DC motor -Max. speed: 6000/49 rpm -Power: 0.52 kW -Motor torque: 1.15 Nm -Shaft: Ø 25 mm -Design: B5 -Transmission manufacturer: SEW Eurodrive -Type: RF27 AQH80/2 -Translation: 1:28,37 -Dimensions: 410/140/H140 mm Hfsdpfxeb Dk D So Afkjb -Weight: 8 kg

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 8,000 kg, spindle mount: MK 6, The PORĘBA TPK-90/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Hodpfx Ajiwa Iasfkofb Availability: on stock available, under power, technical inspection anytime after appointment Technical data: - distance between centers/turning length: 6000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 8500 mm width: 1800 mm height: 1800 mm total weight: 8000 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: good (used), Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, blind conveyor belt, slat conveyor belt, transfer station Hedsptf H Dopfx Afksfb -Transfer station: Conveyor belt with tipping function, comes from blind production -Speed: 10 m/min -Conveyor belt width: 6050 mm -Conveyor belt length: approx. 880 mm, dimensions see technical photo. drawing -Drive/gearbox: 2x Nord, see photos of nameplates -Transport dimensions: 6050/910/H960 mm -Weight: 520 kg