Used Barfeeder for sale (37)

Condition: used, Year of construction: 2017, Load capacity of the bar length 1219 mm Minimum bar length 254 mm Maximum lifting capacity of the lifting arm 36 kg 0 380 V / 50 Hz dimensions of the machine ca. 2,29x1,68x1,43 m Hnslhcdwowcg Dzs Esp weight of the machine ca. 408 kg Total weight, approx. 545 kg The Haas bar feeder is a simple and affordable solution for automating part automation of parts production on Haas turning centres. It is designed exclusively for use on Haas turning centres and is connected to the Haas control system.

Condition: used, Year of construction: 2008, operating hours: 36,051 h, Functionality: fully functional, Controller FANUC 310i No. of cnc controlled axis 9 No. of turrets 3 x (2 x lower and 1 x upper) Spindles 2 x (main and sub) Turrets 12-fold Travels X/Z = 215 / 350 mm Spindle speed 7000 rpm Hnolhcdswymydjw Eep Speed of live tool 5000 rpm Spindle power 16 kW Bar capacity D45 mm Chuck dia max D140 mm. Power required 100 kVA Barfeeder FMB Turbo 5-42 Chip conveyor Coolant unit Some tool holders and collets Manuals

Condition: used, Year of construction: 1998, operating hours: 97,593 h, Functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Hnolhcdswym Nfew Eep Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: 175385, bar length: 3,000 mm, bar diameter: 12 mm, LNS Tryton Barfeeder – Year of construction 2022 Very well maintained LNS Tryton barfeeder, year of construction 2022. The device is fully functional and in excellent condition, both technically and optically. This barfeeder has been used behind a Citizen L12 and is therefore perfectly suited for fine and precise applications on long turning machines. Specifications: Year of construction: 2022 Bar diameter: 12 mm Fully functional and ready to use Helowl E Htjhcdw Esnp Suitable for precise and stable material feed Has worked in combination with a Citizen L12 Very well maintained – as new Direct contact with the end user An excellent choice for those looking for a reliable and professional barfeeder of high quality.

Year of construction: 2005, Condition: good (used), All parts shown by hand not come. VAT not included in price. Hslhcsd N I Ezodw Eenp

Condition: ready for operation (used), controller model: Fanuc 310i, total length: 4,500 mm, total width: 1,990 mm, total height: 2,300 mm, net weight: 10,000 kg, swing diameter over cross slide: 950 mm, Spindle 1: 20 kW - 5000 rpm - spindlebore: 70 mm Turret 1: 12 driven tools - 2,5 kW - 4000 rpm Driven C-axis X1 movement: 165 mm Y1 movement: +50/-30 mm Z1 movement: 678 mm Spindle 2: 17 kW - 5000 rpm - spindlbore: 42 mm Turret 2: 12 driven tools - 2,5 kW - 4000 rpm Driven A-axis X2 movement: 165 mm Z2 movement: 640 mm Iemca Master 880 P barfeeder Dia of spindle bore: 70 & 42 mm Power on the spindle: 20 & 17 kW Number of speeds: 5000 rpm Hnelhov Rwltjcdw Eop Chuck: Ø 175 mm Toolchanger: yes (2x) Number of tools: 12 tools (2x)

Condition: used, Hydraulic barfeeder SAMECA QUICKSAM 20 Helhcdwjv Acine Eenp

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, Controller GE FANUC 21i-TB Swing dia 533 mm Turning dia 340 mm Turning lenght 355 mm X travel 209 mm Z travel 355 mm Spindle hole D50,8 mm Spindle speed 5000 rpm Chuck size max. D200 mm Turret 12-fold Rapid speed 30 m/min Spindle power 11 kW Spindle face A2-6 Tool holder type VDI30 C axis 0,001 degree (programmable) Dimensions LxWxH = 2300 x 1700 x 1700 mm Hnolhcjvw Uqajdw Eop Weight ca 3000 kg Features, accessories - Hydraulic chuck - Short barfeeder EMT Super 80 - Manual Guide in FANUC Software - Drive tool turret and C axis - Tailstock - Part catcher - Manuals Very good condition. The lathe works accurately and run quitely. Ready to buy immediately.

Condition: used, TECHNICAL DETAILS - min. / max. Ø : 2 / 16 [mm] - max. bar length : 4 [m] - diameter : 17 - 13 - 6 Hnslhceuhbhzjdw Eop

Condition: used, TECHNICAL DETAILS Hnslhcdwouhbhbs Ejp - Bar diameter : 5-10-15 [mm] - Max. bar length : 4500 [mm] - Number of bars : 1

Condition: good (used), Year of construction: 2000, Traub TNL12/7 Spindle passage 12.7mm Turning length 130mm Main spindle 4kW; oś C 0.001 grad; 12.000 rpm Hnelhcdspuilvsw Esp Revolver 1 - axis X1 Y1, 6 tools, driven tools 1.5kW Revolver 2 - axis X1 Z2, 6 tools, driven tools 1.5kW Subspindle 2.5kW; axis C 0.001 grad; 12.000 rpm Frontaparat - axis Z3; Z4/X3, driven tools Backparat - axis X4, driven tools 1.5kW Barfeeder FMB Minimag For sale 2 machines, a lot of accesories and toolholders. Machines under power, in production. 1. TNL12/7 s/n: 248 b/y: 2000, (7 linear axes X1, Z1, Y1, X2, Z2, X3, Z3 +2x C axis) + FMB Minimag + Knoll swarf conveyor 2. TNL12/7 s/n: 277 b/y: 2000, full option (9 linear axes X1, Z1, Y1, X2, Z2, X3, Z3 X4, Z4 +2xoś C axis) + IEMCA Genius + Knoll swarf conveyor

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 26 [kW] - Spindle speeds : 3000 [rpm] - Max. bar diameter : 91 [mm] - Max. turning diameter : 430 [mm] - Max. diameter on bench : 650 [mm] - C axis indexing precision : 0.001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 245/1040 [mm] - Tool type : BMT65 - Live tools speed : 5000 [rpm] - Live tools power : 5.5 [kW] TAILSTOCK - Tailstock type : Numérique - Type of cone : CM4 - Tailstock stroke : 966 [mm] Hnjlowyx Rnehcdw Eep - Quill stroke : 100 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 41 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3780 X 1610 [mm] - Machine height : 1937 [mm] - Machine weight : 6500 [kg] MACHINE HOURS - Number of working hours : 0 [h] EQUIPMENT - CNC : Siemens 828D - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : SHOPTURN - 3 colors status lamp - Coolant tank * with high-pressure pump : 10 [bars] * With washing gun - Chips conveyor - Tool probe - Parts catcher - Predisposition for barfeeder - Rest predisposition - Chuck 3 jaws : SAMCHULLY 305 (mm)

Condition: good (used), Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: Hslhcdwetrvzxj Eenp No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg

Condition: like new (used), Year of construction: 2021, operating hours: 808 h, Functionality: fully functional, Citizen M16 VIII machine comes with a high preasure pump Mueller CL1, FOX WS 2 - 1000 oil mist collector, Minimag 20 barfeeder. Also Microconic MASA ultra precise collet for sub spindle with lots of collets. Machine barely worked, and is as new, fully functional. Hnslhcdewhbdajw Eop Esprit CAM with postprocesor also avaiulable

Condition: excellent (used), Year of construction: 2007, GILDEMEISTER CNC Turning Centre with C-axis, Y-axis, sub-spindle and live tooling Type:CTX420 Linear Year:2007 Control:FANUC 180-i XZ travel:185x635mm Y-axis:±40 Spindle speed:5000rpm Sub-spindle speed:7000rpm Turning length:600mm Max. turning diameter:680mm Spindle bore:70mm Toolchanger:12atc (VDI40) With swarf conveyor With parts catcher Good package of tooling With all manuals Barfeeder not included Machine weight:6500kg Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details! Holhcdswvfppsw Eonp

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, spindle bore: 20 mm, spindle speed (max.): 10,000 rpm, bar passage: 20 mm, Equipment: documentation/manual, CNC sliding headstock lathe Citizen L520, year 2001 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2) Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), Live tools on the main spindle Hslhcdwot St A Tj Eenp automatic fire extinguisher FMB barfeeder Machine runs without problems or defects, can be inspected in production and seen running. Machine has all books and manual.

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, Manufacturer: Manurhin Model: KMX 732 evo Swiss-Type CNC-Lathe New in: 2013 Control: Fanuc 31i Model B Incl. Barfeeder FMB Turbo 3-36 Helhcdwou E S Nms Ejnp Live tool B-Axis Number of axes: 7 Number of spindles: 2 Main spindle: Max bar diameter: 32 mm Travel: 380 mm Spindle speeds: 8000 rpm Spindle power: 7,5 / 10,5 kW Counter spindle: Max bar diameter: 32 mm Z stroke: 295 mm Spindle speeds: 8000 rpm Spindle power: 3,7 / 5,5 kW Machine floor space: 3000 x 1400 mm Machine height: 1857 mm Machine weight: 4300 kg.

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MAIN SPINDLE - Spindle power : 26 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 77 [mm] - Max. turning diameter : 420 [mm] - Max. diameter on bench : 750 [mm] - Spindle nose : A2-8 - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260 / 1605 [mm] - Y stroke : +/- 75 [mm] Hnjlsuhbnzehcdw Eep - Tool type : VDI 50 - Live tools speed : 25 - 4.000 [rpm] - Live tools power : 7,5 [kW] TAILSTOCK - Tailstock type : Numérique - Type of cone : CM4 - Distance between centers : 1.500 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 55,6 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 4.270 x 2.206 [mm] - Machine height : 2.165 [mm] - Machine weight : 7 800 [kg] MACHINE HOURS - Number of working hours : 35000 [h] EQUIPMENT - CNC : Mazatrol 640T NEXUS - Interface : USB / RJ45 / RS232 - Coolant tank : 350 [l] - Chips conveyor - Tool probe - Parts catcher - Predisposition for barfeeder - Rest : SMW SLU-3.1-MS Ø20-165 - Number of turning tool holders : 2 - Number of fixed tool holders : 10 - Chuck 3 jaws : KITAGAWA B210

Year of construction: 2012, Condition: ready for operation (used), Control Unit Brand MAZATROL Additional Equipment Barfeeder Interface Kit / Auto Parts Catcher(D:77XL:120X2.5KG) / Hi-Pressure Coolant System 15KG(213PSI) / Chip Conveyor Side Disposal(Hinge) 1000U This 3-axis Mazak QTN 250-II M was manufactured in 2012. It features a high-pressure coolant system at 213 PSI, a chip conveyor for efficient side disposal, and a bar feeder interface kit. Ideal for complex turning operations, it also includes an overload detection system and auto parts catcher. If you are looking to get high-quality turning capabilities consider the Mazak QTN 250-II M machine we have for sale. Contact us for more information about this machine. Application Types Hslhcdwownun Ej Eonp Turning

Condition: used, Year of construction: 2025, Manufacturer: Giovanni Cucchi Machine type: Automatic short bar loading magazine for single-spindle / short turning Type: DB-EVO70C Design: Surface loading magazine diameter range: 20-70mm The advantages of DB-EVO barfeeders at a glance: - oriented loading of the bar material possible (e.g. edge upwards) - dry running - no oil flow - significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel Holhcdwswml Duo Eonp - very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles) - short remaining pieces, as no clamping sleeve is used - very short charging time (charging process still during machining) - solid construction - very low wear of the guide channel - external loading - therefore no stop for new bars necessary, low power consumption (start/stop function) Please, contact us for getting more information and pictures on mail(at) or *

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 750 mm, turning diameter: 370 mm, spindle bore: 82 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 267 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 840 mm, spindle motor power: 22,000 W, rotational speed (max.): 6,000 rpm, total height: 2,300 mm, total length: 3,000 mm, total width: 2,140 mm, turning diameter over bed slide: 370 mm, overall weight: 6,200 kg, bar diameter: 82 mm, Equipment: documentation/manual, TAKISAWA TS-4000YS FANUC 32i-B JAPAN Made in Japan High rigidity (6200 kg weight, 30° inclined machine bed, slide rails) - Built-in main and sub-spindle - High rigidity and built-in main and sub-spindle enable precise and vibration-free machining - 22 kW main spindle with 618 Nm max. torque - High performance and solid machine bed enable high-volume chip removal - Y-axis Technical data: Capacity Max. swing diameter Ø 600 mm Max. turning diameter and length Ø 370 x 750 mm Trought hole: Ø 82 mm Spindle Axle height from the ground 1,140 mm Spindle bearing/bore diameter Ø 140 / Ø 90 mm Spindle head A2-8 Spindle speed 4,200 rpm C-axis resolution 0.001 ° Sub spindle Axle height from the ground 1,140 mm Spindle bearing/bore diameter Ø 90 / Ø 53 mm Spindle head F-140 Spindle speed 6,000 rpm C-axis resolution 0.001 ° Strokes and rapid traverses Strokes X-axis = 267 mm Z-axis = 840 mm Y-axis = - 50 ~ +70 mm A-axis = 780 mm Rapid traverse X-axis = 30 m/min Z-axis = 30 m/min Y-axis = 10 m/min A-axis = 30 m/min Power Spindle motor (30 min. / 100 % ED) AC 22 / 15 kW Holjv T R Eljhcdw Ejnp Max. torque: 618 Nm (S3 25%) Driven tools Number of tool positions on the turret 15 pcs Max. tools speed 6,000 rpm Drive power (30 min. / 100 % ED) 7.5/3.7 kW Maximum torque 48 Nm Tooling Driven tool positions 15 pcs Tool cross-section 25 x 25 mm For hole machining Ø 40 mm Dimensions Height 2,300 mm Depth (without chip conveyor) 2,140 mm Width (without chip conveyor) 3,000 mm Net weight 6,200 kg Including options: FANUC Data SERVER LNS Barfeeder interface Part catcher chip conveyor Renishaw tool mesaurement (main and subspindle also) Kitagawa BB-250 3 jaws hydraulic chuck – main spindle Kitagawa SS1881K hyraulic holow cylinder – main spindle Kitagawa B-206 3 jaws hydraulic chuck – sub spindle Kitagawa SS12640K hyraulic holow cylinder – sub spindle 15 pos turret High power coolant pump (520W) Work lamp 3-3 pcs live tool (radial-axial) Live center some static tool holder NOT INCLUDING: 2 pcs SMW chuck (possible buy) transporting

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 42 [mm] - Travel : 100 [mm] - Spindle speeds : 6000 [rpm] - Spindle power : 7.5/5.5 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 34 [mm] Holhcdwouhad Us Esnp - Spindle speeds : 5000 [rpm] - Spindle power : 5.5/3.7 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 2 UPPER TURRET - Number of positions : 8 - X stroke : 140 [mm] - Z stroke : 235 [mm] - Y stroke : 70 (+/-35) [mm] - Live tools speed : 5000 [rpm] - Live tools power : 1.0 [kW] LOWER TURRET - Number of positions : 6 - X/Z stroke : 140 / 310 [mm] POWER SUPPLY - Total installed power : 30 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.220 x 1.460 [mm] - Machine height : 1.700 [mm] - Machine weight : 3100 [kg] MACHINE HOURS - Number of working hours : 52896 [h] EQUIPMENT - CNC : Fanuc Oi-TD - Parts conveying strip - Ejection of workpiece - Chips conveyor - Predisposition for barfeeder - Electric transformer - Collets collection for guide bush

Year of construction: 2008, Condition: ready for operation (used), Control Unit Brand HAAS Main Drive Spindle speed range 3400 rpm Media Chip conveyor Yes Additional Equipment Toolsetter Hnelhcdswmg Uhow Ejp VDI40 x 12 Part Catcher / Hainbuch SK80 / KID 80 Barfeeder This HAAS SL-30 was manufactured in 2008. A robust horizontal turning machine featuring a 22 kW, 3400 rpm gearbox, and a 102 mm bore. It includes a Hainbuch SK80, chip conveyor, tool setter, part catcher, and a KID 80 bar feeder. If you are looking to get high-quality turning capabilities, consider the HAAS SL-30 machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2021, Condition: ready for operation (used), General Data Measurements width 2140 Measurements depth 3000 Measurements height 2300 Machine weight 6200 Control Unit Brand FANUC Model Series 32i-Model B Main Drive Hneljwk Rrfshcdw Esp Spindle speed range 4200 Main motor power 22 kw Movement X-Axis Movement 267 X-Axis Rapid Traverse 30 m/min Y-Axis Movement -50 to 70 Y-Axis Rapid Traverse 30 m/min Z-Axis Movement 840 Z-Axis Rapid Traverse 30 m/min Media Chip conveyor Yes Additional Equipment LNS Barfeeder interface Part catcher Renishaw tool measurement (main and subspindle also) Kitagawa BB-250 3 jaws hydraulic chuck – main spindle Kitagawa SS1881K hydraulic hollow cylinder – main spindle Kitagawa B-206 3 jaws hydraulic chuck – sub spindle Kitagawa SS12640K hydraulic hollow cylinder – sub spindle 15 pos turret High power coolant pump (520W) Work lamp This 3-axis Takisawa TS-4000YS was manufactured in 2021. It features a robust 6200 kg frame with a 30° inclined bed for stability and precision. Key specs include a 22 kW main spindle, 618 Nm torque, and rapid traverses up to 30 m/min. It's equipped with a dual spindle, Y-axis, and a 15-position turret for versatile machining. If you are looking to get high-quality turning capabilities, consider the Takisawa TS-4000YS machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2014, Condition: ready for operation (used), Control Unit Brand HAAS Main Drive Spindle speed range 3500 rpm Spindle motor power 22 kW Number of axis 3 Media Chip conveyor Yes Additional Equipment Part catcher Barfeeder This 3-axis HAAS ST-30 horizontal turning machine was manufactured in 2014. Ideal for precision turning operations, it offers robust construction and reliable performance. Consider the opportunity to buy this HAAS ST-30 horizontal turning machine. Contact us for more information. Application Types Turning Hnelhcdjwgp R Ejw Eep