Slant bed cnc lathe with C axis

HEADMAN T55M/500

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, Swing diameter over bed: 550 mm Max. machining length: 428 mm Max. machining diameter: 300 mm Spindle bore: 62 mm Bar machining: 51 mm Spindle nose: A2-6 Motor spindle speed range: 35 - 5000 rpm X-axis travel: 210 mm Z-axis travel: 561 mm Tool changer for powered tools: 12 Tool changer locking: hydraulic Tool changer drive: servo Tool change time: 0.2 seconds Tool holder: cross-section 25 mm Max. speed of powered tools: 5000 rpm Max. power of powered tools: 5 kW Max. milling capacity, shank cutter: 16 mm Max. milling capacity, cutter head: 50 mm Max. drilling capacity: 16 mm Max. threading capacity: M16x2 Rapid traverse rate, Z-axis: 30 m/min Nwedpfjy S R Tlex Ahksk Rapid traverse rate, X-axis: 30 m/min Positioning accuracy: 0.008 mm Repeatability: 0.003 mm Tailstock: programmable Arbor mount: Morse taper 4 Tailstock travel including quill travel: 565 mm Hydraulic unit tank capacity: 20 L Hydraulic unit pump output: 1.5 kW Hydraulic unit nominal pressure: 3.5 - 6 MPa Central lubrication tank capacity: 2 L Central lubrication output: 25 W Coolant tank capacity: 130 L Coolant pump output: 25 W Continuous motor power: 11 kW 400 V 50 Hz Short-term motor power (30 min): 15 kW 400 V 50 Hz Weight: 4,000.00 kg Dimensions: 2600 x 1685 x 1768 mm Machine scope of delivery: Coolant system, extraction system with filter, tool changer for 12 powered tools, 200 mm hydraulic chuck, Siemens 828D control, 17" touchscreen, programmable tailstock, Renishaw measuring arm, chip conveyor, German operating manuals, CE declaration of conformity.

Condition: used, Year of construction: 1998, Turning length 322 mm Nwsdpfx Ajx N A N Hehksk Max. swing over bed ways 510 mm Max. turning dia. 279 mm Spindle speeds 60-6000 rpm Spindle bore 53 mm Turret w/12 stations Control: Fanuc 21 T Equipped with: Magazine bar feeder Hatec Rapid Load 12 Tail stock Various tool holders & collets 3-jaw chuck

Condition: used, MAZAK QT 20 Model: OT-20-N-K Turret: 8 positions Motor: 18.5 kW Year: 1988 Njdpewulzvsfx Ahkewk Weight: 11,700 lbs Chuck: diameter 250 renewed operational panel

Condition: used, Year of construction: 1972, turning diameter over bed 1650 mm turning diameter over slide rest 1350 mm turning length 10000 mm turning speeds 1,4 - 280 U/min greates pass round over bed 1580 mm center height over square guideway 825 mm bed length 13.350 mm bed width 1.120 mm spindle diameter in front bearing 260 mm spindle bore 82 mm Njdoy S Duvopfx Ahkewk upper head travel 500mm tailstock quill diameter 200 mm max. workpiece weight between centres 10.000 kg weight of the machine ca. 25,5 t Power 45 KW The machine is a first-hand purchase, is free from defects and is in very good condition. In 2023, the headstock was overhauled; this included replacing the main spindle bearings, chrome plating and reworking the main spindle and bottom wheel (bearing seat). The guideways are also in very good condition, considering their age. Accessories - Feed guard Equipment - 3-axis digital display - 1 x faceplate - 1 x roller stand - Chip conveyor (Kabel Schlepp 300/100)

Condition: used, Swing Diameter Over Bed: 400 mm Swing Diameter Over Longitudinal Slide: 350 mm Distance Between Centers: 610 mm Travel Limit: 240 mm Suggested Workpiece Diameter: 200 mm Max Longitudinal Travel: 560 mm Machining Length: 550 mm Max Cross Travel: 40 mm + 120 mm Height of Spindle Axis from Floor: 1135 mm Programmable Spindle Speed Range: 40 to 4000 rpm Nsdpfx Aexg Nd Aohkjwk Spindle Bore Diameter: 52 mm Spindle Interior Cone: MK 6 Slide/Bed Slope: 45/45° Turret Positions: 12 Tools Main Motor: 15 kW Control: Fanuc 6T Equipped with: See photos

Condition: used, Year of construction: 1979, functionality: fully functional, Swing over bed 2000mm Swing over carriage 1700mm Turning lenght 8000mm Max. weight of workpiece in centers 80 ton Max. weight of workpiece in centers and steadies 100 ton Main motor power 150kW Spindle speed (3 ranges) 0,5-160rpm 4-jaws independent chuck dia. 1700mm Min. clamping dia. 170mm Max. clamping dia. 1400mm Dia. of tailstock quill 450mm Bed width 2280mm Height of bed 650mm Nwedpfxoyy Nx Ns Ahkek Special equipment: - 4-jaws chuck dia. 1700mm - tool system: double shelf toolpost - steady rest dia. 200-600mm - steady rest dia. 600-1100mm - open steady rest up to 1600mm Total weight of the lathe 110 tons

Condition: used, Year of construction: 2009, Technical details: turning diameter: 1000 mm swing diameter: 1000 mm Machine type: Vertical lathe Manufacturer: Hessapp Type: DV 62 Serial no.: 14.2308 Working range of the spindle Largest diameter 1000 mm Largest swing diameter 1000 mm Cross slide travel Stroke of the vertical slide 900 mm Stroke of the horizontal slide 1810 mm Total travel 2315 mm Turning spindle Spindle head with centering cone according to DIN 55021 A15 Spindle diameter in the front bearing 203 mm Main drive Via a controlled asynchronous motor and gear transmission with range switching. Spindle speeds Speed ??range I: 5 - 350 rpm. Speed ??range II: 30 - 1000 rpm. Travel speed X/Z axis: 10 m/min. W1 axis: 8 rpm Njdpfx Ast Rmdzshkswk No C-Axis *

Condition: good (used), Year of construction: 2007, CNC turning machine DOOSAN Type: PUMA 480 LM Year of manufacture: 2007 Control: Fanuc 21i T Technical data Swinging diameter mm 900 Turning diameter standard mm 380 Max. turning diameter mm 650 Turning length mm 2001 Travel X-Z axis mm 362/155 Bar diameter mm 165.5 Spindle bore mm 181 Chuck diameter mm 530 Spindle speed rpm 1500 Drive power kW 45 Tool turret number 12 Powered tools number 12 Speed of powered tools rpm 3000 Drive power kW 11 Accessories 3-jaw power chuck, tailstock programmable (following) with programmable center, chip conveyor with hinged belt, steady rest self-centering SLU 4 Ø 35-245 mm, tool load monitoring, coolant pump 14 bar, Automatic tool measuring arm. Njdpfxszqzm De Ahkswk

Condition: used, Double-column hydraulic press, SMG Type HBP 200 - 2000 / 2000 Manufacturer's No. 7.4117, Year of manufacture 1986 - Refurbished 2000 Clamping force 200 tons Column width at the front 2050 mm Column opening on the side 2030 mm Table surface 2800 x 2000 mm Ram surface 2000 x 2000 mm Ram stroke 700 mm Installation height max. 1850 mm Table height above floor 750 mm Ram retraction force 33 tons Rapid traverse speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety clearance 230 mm Main motor power 75 kW Control pump motor power 11 kW Power supply 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in the top dead center position - Linear encoder system with glass scale - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Adjacent control cabinet - 2-hand control panel adjacent - Floor-level installation - Central lubrication - Operating manual with wiring diagrams Space required for the press in upright position L x W x H 3700 x 2900 x 5900 mm Nedsdzp Tcspfx Ahkewk Machine height complete with motor 5900 mm Space required for horizontal transport L x W x H 5900 x 3250 x 2950 mm Weight 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000, the machine was used as a tool try-out press in a toolmaking company. Good condition.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 18,845 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, spindle motor power: 33,000 W, controller manufacturer: SIEMENS, controller model: 828D, number of axes: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information. Additional equipment • Mekiload Gantry Loader • Renishaw Equator • Renishaw Equator • Machine includes a rotary indexing magazine • Machine includes a gantry robot Nsdpfx Ahoyr R A Eekjwk Machine Benefits Qualitative Machine Benefits • Tool change time: 1. 0 second • Max speed (station): 5000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump capacity: 1. 5 kw Technical Machine Benefits • Max. Turning diameter over bed: 780 mm • Max. Turning diameter over slide: 630 mm • Max. Turning length: 760 mm • Main spindle torque: 719 nm • Spindle mount (main): a2 #8 • Sub spindle speed: 6000 rpm • Sub spindle power (30 min): 18. 2 kw • Sub spindle torque: 220 nm • Spindle mount (sub): a2 #5 • Number of stations: 24 (12 driven) Extra Information Machine still under power